Swf doesn't get smaller

Hallo,
I made a Flash 8 movie (Swf) that is 212kb in size.
I received advice that I could reduce the size of my .Swf by compressing its pictures.
I did so, reducing the pictures inside it from 518kb to 183kb with Irfanview but when I import them into my movie/library and save it there is NO difference in size - it stays on 212kb.
Did I do something wrong?
Thank you!

Also answered this in the Flash Kit Forum but thought I'd share here as well. There's really no need to rebuild a swf if all you are doing is editing or reducing the file size of images.... assuming you are doing this editing outside of Flash:
Not sure if you are aware of the "update" feature or not.
So say that you use a number of images in your .swf, you import them to the Library, etc.
Then you decide to make some changes to the images, make them smaller, add something to the photo, take something off the photo...
So go ahead and make those photo edits to files that are used in the .swf, but make the edits outside of Flash, resizing them PhotoShop or something like that. No need to re-import the photo, Flash knows where it is...But the edits will not show in Flash until you select that photo from the Library panel in Flash, right click on it to bring up menu, and down at the bottom of the drop menu is "update". Click the "update".
Now your new edited version of the photo will be used in Flash...
this "update" will now include file size reduction as well as any other edits to the photos.
And on another point... I wouldn't worry much about a 212Kb .swf... now-a-days, that's not that large. As more and more highspeed Internet connections become available, the difference in download time between 212Kb and 147Kb, is really negligable. If reducing the size results in a noticable degrade in quality, I would not do it. The download time saving may not be worth it.
I think it's a good idea to plan for at least 1 year+ into the future when designing Web content. You don't want to have to come back a year from now and redo the entire.swf because the quality is so low or the display size so small for viewers with faster and faster Internet connections and larger and larger monitor screens.
Best wishes,
Adninjastrator

Similar Messages

Ap.thumbnails file doesn't get smaller

when the underlying project is reduced.
I have a project in which I removed ~ 70% of the files and noticed that the size of the AP.thumbnails file for the project remained constant at 231 MB. I created a new project moved all of the images to it and the AP.thumbnails file is 27 MB. Any ideas why the original one wasn't reduced?
I'm using GrandPerspective to look at the underlying file size quickly, but the shell should show the same.
---rick
BTW I care since I'm rsync ing to a JungleDisk that connects to Amazon's S3 service and my Cable upload speeds are abysmal (45 KB/sec)
Dual 1.8 G5 Mac OS X (10.4.8)

I would guess that the thumbnails file grows but does not shrink. You have probably inported lots of images and then deleted many of them.

SWF Doesn't Display

I'm redesigning a site with a SWF movie on the home page but the SWF doesn't display on the redesigned page. Original page displays fine. Same results on IE 7 & 8 and FF - that seems to rule out computer & browser errors. The only difference I see is new page is XHTML while the original is HTML - The code on the two pages is virtually identical except for that.
Redesigned site is http://www.bath-hancock.com/index.html
Original site is http://www.countryconnectionsva.com/index.htm, on a different host.
Live HTTP Headers shows everthing is being downloaded properly except http://www.bath-hancock.com/flash/CountryConnections.f4v and http://www.bath-hancock.com/SkinUnderAallNoFullNoCaption.swf get 404 errors - these files don't appear on the original site and I don't know what they are as I can't find any reference to them in the code for the new site.
Any suggestions would be greatly appreciated.
Thanks!

Thanks Murray,
Yes, I tried that but didn't know what to exect as I have never done that with a SWF before. I downloaded the
entire old site with DW, copied the files to the new directory, and then uploaded them with DW. I guess I'll repeat the process and see what happens.
Hmmm - I can play the one I initially downloaded in Flash but I get the following error when I try to play the copy:
Error #2044: Unhandled skinError:. text=[IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2035: URL Not Found. URL: file:///Macintosh%20HD/Users/laurenceheine/Sites/Country%20Connections/SkinUnderAllNoFull NoCaption.swf"]
Checking what was downloaded, I found three more files: SkinUnderAllNoFullNoCaption.swf, CountryConnections.f4v, and CountryConnections.flv. Copied those to the /flash directory and now the SWF plays on my computer in Flash. Uploaded them to the server and it plays w/o the skin (still get that 404 error). Moved the skin to root and it plays fine. Wonder why it plays ok in /flash on my computer but not on the server?
Only issue left is the white background - can I change that somewhere? (I don't do Flash so have no clue.)
Thanks again!
Larry

UILoader content gets smaller when coming back

Hello all,
I have several external loaded swf's in my website...
For example;
When in home and clicking to contact.
Then contact gets a little bit smaller.
When clicking back on home, home gets smaller... and so on...
if i repeat this process everything gets smaller and smaller...
How can i lock this size?'
Thanks in Advance

Yeah big Thanks, dunno how to use the setsize method but i've forgot to set the right settings at component properties
ScaleContent = false
MaintainAspectRatio = True
Thanks!

Linked picture gets smaller than its original size when it's copy-pasted.

This confuses me because some does and some doesn't. A picture always gets smaller when I copy-paste from Mspaint. And some pictures does this too when I just copy-paste itself. So, I need to adjust size manually and it really bothers me, is there any solution for this?

Some application disply images pixel by pixel, that is: one pixel in the image is one pixel on the monitor. Illustrator uses the image's resolution to display it.

Why does it not get smaller?

Hi guys, new on here so I'll just pop up my question sooner rather than later:
I've got iMovie HD 6.0.1 and editing a LONG movie from my around-the-world-trip. After doing a seriously too-long job on importing around 1,500 separate clips (from a HDDV-camera that was not looking to co-operate) I had around 5 hours of material.
This file made about 48 GB on my 95 GB hard-disc.
I didn't have much space left when I started editing but was sure the file would get smaller as I "clipped away" more and more from the film.
I have finished editing for now, and reduced the film with almost one hour, now at 4 hours and 10 mins. The file, however, has gone almost 10 GB bigger, and I only have about 4 GB of free space left.
Why on eart has the file got bigger rather than smaller after cutting down the film? I have not made much of "special effects" on it, and I have emptied the trash-can all the time.
As it doesn't seem to be arranged that iDVD manages to split the film up, I will have to export it out on DV-tapes, then delete the whole project - and then import it back in one hour at a time, to burn DVD's of Part I, Part II, etc.
Any explanations, and hopefully solutions on why the file size has not got smaller are welcomed!
MacBook Mac OS X (10.4.8) Norwegian letters

welcome svend to the  boards of discussions ...
'non distructiveness' is the keyword, using it in the searchfield, upper right on this website, will spit out a few dozend threads...
in basic:
you import 1 Gig of video...
you haven't set in iM's prefs, to 'segment' the import...
you crop a 30sec piece out of this beast of film...
30sec dv = 100MB...
< noise of a BUZZER! >
wrong..
that clip has still a 'connection' to its import.. the 1Gigger mentioned above..
if you copy/paste that 30secs into another project, you would copy 1GB of data...
no workaround for that.
* import wisely, just what you need
* set iM's import prefs to some smaller size... e.g. 3min... larger imports get split, but you wouldn't notice while playback...
* iM is a consumer product.. 5h? ... phphewww... how to you keep 1500 clips in mind?? and: 5h/1500 clips = 10sec each clip..? that's no movie, it's a slideshow ;-))
* iDVD need 10 - 15GB free to work smoothly... use an ext. drive for your iM projects..
* a dvd-r fits max. 120min... why not producing 'segements'/episodes, and not an 'opus magnum'?
what I would do....:
do paper-editing first.. select your imports while watching the tapes on a TV... write down a script ... segment your project into at last 5 parts... create an iM project for a part.. import just for that part.. export final part back to tape... import parts into new iM project/iDVD... be a happy film editor..

When I login, all of my desktop items are gone, the "Finder" icon is bouncing and a message asking to restore windows is blinking but unresponsive. I can't exit out of it. What do I do? I've tried force quitting, and it doesn't get rid of it.

When I login, all of my desktop items are gone, the "Finder" icon is bouncing and a message asking to restore windows is blinking but unresponsive. I can't exit out of it. What do I do? I've tried force quitting, and it doesn't get rid of this message. When I login to my husband's account, this message does not appear.

Hey sunnyday7!
Here is an article that can help you address this issue:
OS X: How to quit an unresponsive application using Force Quit
http://support.apple.com/kb/ht3411
Additional Information
OS X automatically relaunches the Finder when it is quit. If the Finder is unresponsive, use Force Quit to relaunch it. Select Finder in the Force Quit Window or Dock, then click Relaunch.
Thanks for using the Apple Support Communities. Have a good one!
-Braden

My mac froze in an application so I shut it down by powering off with button, now when I try to turn it on I have a grey screen with Apple loge and the timer swirling but it doesn't get past this, please help!

I Shut down my Mac by holding in the power button after my iMac froze and now when I try to turn it back it on all I get is the grey screen with Apple loge and the timer and doesn't get any further. I have tried the diagnostic test but nothing was found.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Double Click in ALV TREE doesn't get triggered

Hello All,
Double click event on item in a alv tree report doesn't get triggered. I thought I was doing everything right. Please help me out.
Look at the code below and tell me what else I need to do.
<b>FORM register_events .
Event registration: tell ALV Tree which events shall be passed
from frontend to backend.
DATA: lt_events TYPE cntl_simple_events,
        l_event TYPE cntl_simple_event,
        l_event_receiver TYPE REF TO lcl_tree_event_receiver.
Frontend registration: get already registered tree events
CALL METHOD g_alv_tree->get_registered_events
    IMPORTING
      events = lt_events.
Frontend registration: add additional event ids
l_event-eventid = cl_gui_column_tree=>eventid_node_double_click.
APPEND l_event TO lt_events.
Frontend registration: provide new event table to alv tree
CALL METHOD g_alv_tree->set_registered_events
    EXPORTING
      events                    = lt_events
    EXCEPTIONS
      cntl_error                = 1
      cntl_system_error         = 2
      illegal_event_combination = 3.
IF sy-subrc <> 0.
    MESSAGE x208(00) WITH 'ERROR'.                          "#EC NOTEXT
ENDIF.
Register events on backend (ABAP Objects event handling)
CREATE OBJECT l_event_receiver.
SET HANDLER l_event_receiver->node_double_click FOR g_alv_tree.
SET HANDLER l_event_receiver->item_double_click FOR g_alv_tree.
SET HANDLER l_event_receiver->on_function_selected FOR g_toolbar.
ENDFORM.                    " register_events</b>
When I double click on item on the report double click event doesnt trigger. what could be the problem? Any sample programs?
Thanks,
Chandni

Hi,
Here is a sample code for you.
report ztree.
TABLES : vbak.
DATA: BEGIN OF mylist OCCURS 50. " Internal table hierarchy
INCLUDE STRUCTURE snodetext.
DATA: END OF mylist.
DATA: f15 TYPE c.
DATA :
BEGIN OF gt_sales OCCURS 0,
vbeln LIKE vbak-vbeln,
kunnr LIKE vbak-kunnr,
matnr LIKE vbap-matnr,
arktx LIKE vbap-arktx,
END OF gt_sales.
SELECT-OPTIONS : s_vbeln FOR vbak-vbeln.
START-OF-SELECTION.
SET PF-STATUS 'ZTREE1'.
SET TITLEBAR 'T1'.
Fill internal table with pseudo-data
PERFORM fill_itab.
Hierarchy output
PERFORM main.
*& Form FILL_ITAB
text
--> p1 text
<-- p2 text
FORM fill_itab .
*Fill the gt_sales table
SELECT vkvbeln vkkunnr vpmatnr vparktx INTO CORRESPONDING FIELDS OF
TABLE gt_sales
FROM ( vbak AS vk INNER JOIN vbap AS vp ON vkvbeln = vpvbeln )
WHERE vk~vbeln IN s_vbeln.
SORT gt_sales BY vbeln kunnr.
*Fill the root
mylist-name = 'Report Tree List'.
mylist-color = 1.
mylist-intensiv = '1'.
mylist-text = 'Report Tree List'.
mylist-tlength = 16.
mylist-tlevel = 1.
mylist-tcolor = 1.
mylist-tintensiv = '1'.
mylist-text1 = 'using "RS_TREE_CONSTRUCT" function'.
mylist-tlength1 = 50.
mylist-tcolor1 = 2.
mylist-tintensiv1 = '0'.
APPEND mylist.
LOOP AT gt_sales.
ON CHANGE OF gt_sales-vbeln.
mylist-name = 'level1'.
mylist-color = 0.
mylist-intensiv = '0'.
mylist-text = 'Sales Document no:'.
mylist-tlength = 20.
mylist-tlevel = 2.
mylist-tcolor = 7.
mylist-tintensiv = '1'.
mylist-text1 = gt_sales-vbeln.
mylist-tlength1 = 30.
mylist-tcolor1 = 2.
mylist-tintensiv1 = '0'.
APPEND mylist.
ENDON.
ON CHANGE OF gt_sales-kunnr.
mylist-name = 'level2'.
mylist-color = 0.
mylist-intensiv = '0'.
mylist-text = 'Customer no:'.
mylist-tlength = 20.
mylist-tlevel = 3.
mylist-tcolor = 5.
mylist-tintensiv = '1'.
mylist-text1 = gt_sales-kunnr.
mylist-tlength1 = 30.
mylist-tcolor1 = 3.
mylist-tintensiv1 = '0'.
APPEND mylist.
ENDON.
mylist-name = 'level3'.
mylist-color = 0.
mylist-intensiv = '0'.
mylist-text = gt_sales-matnr.
mylist-tlength = 15.
mylist-tlevel = 4.
mylist-tcolor = 4.
mylist-tintensiv = '0'.
mylist-text1 = gt_sales-arktx.
mylist-tlength1 = 30.
mylist-tcolor1 = 2.
mylist-tintensiv1 = '0'.
APPEND mylist.
ENDLOOP.
ENDFORM. " FILL_ITAB
*& Form MAIN
text
--> p1 text
<-- p2 text
FORM main .
PERFORM hierarchy. " construct & draw the tree
ENDFORM. " MAIN
*& Form HIERARCHY
text
--> p1 text
<-- p2 text
FORM hierarchy .
PERFORM build_tree.
PERFORM draw_tree.
ENDFORM. " HIERARCHY
FORM BUILD_TREE *
Builds the tree from internal table *
Uses the Function module RS_TREE_CONSTRUCT *
FORM build_tree.
CALL FUNCTION 'RS_TREE_CONSTRUCT'
TABLES
nodetab = mylist
EXCEPTIONS
tree_failure = 1.
ENDFORM. "build_tree
FORM DRAW_TREE *
Builds the tree from internal table *
Uses the Function module RS_TREE_DISPLAY *
FORM draw_tree.
sy-lsind = 0.
CALL FUNCTION 'RS_TREE_LIST_DISPLAY'
EXPORTING
callback_program = 'ZREPORT_TREE'
callback_user_command = 'NODE_SELECT'
IMPORTING
f15 = f15.
ENDFORM. "draw_tree
FORM NODE_SELECT *
Handles selection of nodes *
FORM node_select TABLES knoten STRUCTURE seucomm
USING command
CHANGING exit
list_refresh.
Processing of commands for hierarchy list
CASE command.
WHEN 'DISP'.
CASE knoten-id.
WHEN '000002'.
*Display Sales Order
SET PARAMETER ID 'AUN' FIELD knoten-text1.
CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
WHEN '000003'.
*Display Customer
SET PARAMETER ID 'KUN' FIELD knoten-text1.
CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
ENDCASE.
ENDCASE.
list_refresh = 'X'.
ENDFORM. "node_select

J1iex issue : J_1IEXCDTL GR qty doesn't get updated

Hi ,
we have a process like .... Capture excise invoice , MIGO 103 , MIGO 105 and Post excise invoice.
Facing one issue wherein system is not updated GR QTY in J_1IEXCDTL table.
The step I am following are
1) Capturing excise invoice ( Say number is 100 and excise invoice internal number 45)
2) Cancelled that excise invoice
3) Re-creating exscise invoice with same number ( 100 and excise invocie internal number 46)
4) Did MIGO 103
5) Perfomred MIGO 105
6) Now cancelled MIGO 105 ,
Issue 1 : It changed the status of both excise invoices 45 and 46 (internal numbers) to "IN PROCESS"
Actually the Status of 45 should be CANCELLED and 46 should be "IN PROCESS"
Issue 2 : Generally reversal of MIGO , updates the "Qty of Goods received" in J_1IEXCDTL but in this case Qty doesn't get chaned to 0 for Excise invoice 46.
Issue 3: Because of all these issues , we are not able to cancel Excise invoce 46. System is throwing an error
" REVERSE the material document before invoice cancellation"
have u guys encountered such types of issue ...
regards
Shrey

Hi,
After canceling the GR thru MIGO, please go to J1IEX & select cancel & save it.
It will help to change the status form in process to cancel in excise books.
Hope above will help.
shyam kogta

My father updated his iPhone and once he did that he would receive all of my texts and iMessages, is that because we are on the same iCloud account? And if that's why how can I remove it or make it so he doesn't get all my messages

My father updated his iPhone and once he did that he would receive all of my texts and iMessages, is that because we are on the same iCloud account? And if that's why how can I remove it or make it so he doesn't get all my messages

you can change the accounts of different apps in the phone's settings menu.

Satellite L20: Modem doesn't get dial tone

Hi,
My L20 notebook doesn't get a dial tone whem I'm trying to dial up. On antoher pc the connection works well, so I'm sure that the line has a dial tone and that the other computer is 'listening'.
I also tried to uncheck the 'wait before dial tone' option, tried to remove it from the Device manager, but after this all the modem still doesn't work. The current driver that is installed is version 7.20.00.00, because I can't install the latest version (7.25.00.00) (setup doesn't finish well, no specific error is given).
Does anybody knows what to do??

Open the system control panel and choose the Phone and modem options.
There check the Modems tab. The modem should be placed in the list.
If not, so you need to install the modem driver.
Check the Modem function by pressing the "Query Modem" button.
If the Modem Information window contain a list of AT commands (including ATI2, ATI3, ATI4 etc.), then the modem is correctly installed. The ATI5 command ends in with the number for the selected Regional settings (for example Germany = 06).
To change the Regional Setting please use the Toshiba Internal Modem Region Select Utility.

Delete bank details for a BP in CRM 5.0, it doesn't get deleted from R/3

Hi,
When I delete bank details for a business partner in CRM, it doesn't get deleted form R/3.
Although I can see a green bdoc with confirmed status, with no errors. Any clue?
Regards,
Kaushal

Yes, when I add a new bank detail, it gets properly reflected in R/3. The problem is only during deletion.
I think I've reached the solution - notes 1016909 and 941660.
Regards,
Kaushal

I downgraded from Windows 8 to Windows 7, do I have to reinstall firefox? Text in Yahoo email and Craigslist getting smaller and smaller automatically.

I recently purchased a new laptop which came with Windows 8 (appears you can't find a new one with Windows 7 any more). Reinstalled the latest version of Firefox from the official Mozilla download site. Gave the laptop to my wife and she HATED Windows 8. So I purchased a license of Windows 7 and had Fry's downgrade my Windows 8 laptop to Windows 7. All going well for my wife except her Yahoo email and Craigslist adds get continually smaller and smaller. Did the CTL + trick and reset, but was wonder if I need to uninstall Firefox and reinstall it. My thinking is that the Firefox configuration may think it's still on a Windows 8 machine. Would that eliminate the continual need to CTL+ every time the text gets smaller?

[[Unistall Firefox from your computer]] During the unistall process if you want to remove your Firefox user data and settings, put a check mark in the box that says Remove my Firefox personal data and customizations. If you select this option, Firefox will not preserve your bookmarks, saved passwords, and other data if it is installed again.

I am downloading the Creative Cloud desktop app on my Mac, and it starts to download but just stalls in the process and doesn't get any closer to finishing. Anyone have any suggestions. I've restarted my computer multiple times and restarted the download,

I am downloading the Creative Cloud desktop app on my Mac, and it starts to download but just stalls in the process and doesn't get any closer to finishing. Anyone have any suggestions. I've restarted my computer multiple times and restarted the download, but to no avail.

uninstall anything cc that's already installed, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and the reinstall, Adobe: Creative, marketing, and document management solutions

Swf doesn't get smaller

Similar Messages

Maybe you are looking for