.swf doesnt work properly

the movie includes about 40 scenes, and works properly, but
when i add another scene and place a 5min long movie clip on it,
most of the other scenes dont play, they stop at the first frame.
and no matter what i do with publish settings its always the same
story..what could i be doing wrong. could it be my computer..not
enough memory or something? i havent tried to export it on any
other computer.. help, please

When you say "40 scenes", just a quick question, have you
imported them directly on to the stage to play in the timeline or
imported your scenes dynamically using action script? If you have
imported your movie clips directly onto the stage, you might find
your pc may crash, especially, if you do not have a lot of memory.
believe it or not, a 5 minute movie clip can seem like a quite a
large in Flash. What also happens, your swf file needs to import
all your files before displaying them either onto your PC or on the
Web. If you do not have enough memory, it will take a long time to
play or ulimately crash. Try importing your movie clips
dynamically, using the NetConnection and NetStream in actionscript,
then all your swf file has only to import maybe your movie player
or the first movie, then whilst your user is viewing the rest of
your site, the other movies will not need to be viewed until your
user clicks on the available movie clip or link.

Similar Messages

  • Replace content smart objects doesnt work properly.

    Hello fellow Photoshoppers,
    Currently i am working on reusable album templates with smart objects. At first i was very enthusiastic but this was soon to end. as the replacing doesnt work properly.
    I made the smart object by using:
    1. > file
    2. > place
    then i try to replace the content by using.
    1. > layer
    2. > smart objects
    3. > replace contents
    the old image should get replaced by the chosen file and matching size, smart layers etc. However when i perform the same actions my image gets replaced but it is not the same size as the smart object it replaced. This makes the entire template useless as it would take far too much time resizing every single image. inspired by another video I also tried double clicking the layer and tried replacing the image in the editing sceen by dragging another file on top of the smart object. Again, it does not spread out to the full smart object size and i'm stuck with a small image in need of extra work.
    Needless to say, very frustrating.
    Any thoughts?

    Are you sure you understood how it is intended work?
    That is an interesting question, i have no experience with photoshop as i bought CS5,5 just a week ago and have no experience with any of the previous versions either. All info regarding how to make such a template i found from various tutorials, i posted one below. When they do it the image get scaled perfectly. Now since they use some smart filters in the tutorial i applied them aswell to see if this would fix the problem but it did not.
    http://www.picturesocial.com/video/wedding-photo-album-templates
    Are the images you want to switch in at least always of the same width to height-relation?
    I checked both files for consistency and discovered they were shot on different camera's. One file ( the origional smart object ) was cropped form a 21,0MP file and the other was croped from a 10,1 MP file. Both images were cropped to a 2x1 ratio. Having discovered the difference in pixel amount i cropped a different 21,0 MP file to 2x1 ratio and checked both files for their exact dimensions (both images are equal in size with 5616 x 2808 pixels) and replaced the content with the newly cropped file which gave a much better result. However, the image was slightly smaller in photoshop leaving a small gap where the origionally placed smart object lined up perfectly. I turned the situation around and placed the 10,1MP cropped image as the smart object and replaced the content by a 21,0 MP cropped image. As to be expected i ended up with a new image much larger then the smart object. So the smart object does not constrain the files to the dimensions set. As it turns out it only scales the replaced content relative to the size of the origional content of the smart object.
    I just need a reusable template with objects that:
    - cannot be moved once locked ( if possible) but can have its content replaced
    - scales the replaced content to the predefined dimensions
    - needs no prework like cropping to the same aspect ratio as the smart object content. ( i want to be able to place a landscape sized raw (3x2) on any landscape format  (2x1 / 16x9 / 4x3 or whatever) i find it acceptable to having to crop a portret to landscape orientation first before being able to replace a landscape.
    now ive been searching for more info and some people say indesign is much faster in making album pages so I am installing the program as we speak hoping this will be the solution.

  • Keypad doesnt work properly

    my iphone keypad doesnt work properly the last row where the space bar and the button to switch to numbers doesnt work

    Standard troubleshooting steps in order are power the iPhone off and on, Reset, Restore and if not change after any and all, make an appointment at an Apple Store if there is one nearby or call AppleCare - (800) 694-7466.

  • Ejecting external discs doesnt work properly, no spin down of disc. why?

    ejecting my external discs doesnt work properly anymore in 10.6, no spin down of disc happens, the finder unmounts the disc(s) and then the disc spins on and on. thats weird, because, in 10.5 i ejected discs and then they went spinning down the drive, as it has to be.
    when i unplug the disc, which is unmounted from desktop, and still spinning, it makes a terrible noise in the disc. like a high pitched short tone.
    any idea whats going wrong here?
    thanks!

    you probably mean "causing the fail to spindown"
    you maybe mean software like techtoolpro5 or drive genius3?
    yes i disabled these helper apps on the discs, but first i used it (like monitoring
    all discs if they are nearly full, or working s.m.a.r.t and so on. yes its useful,
    but obviously it causes problems. i must mention, that i tested my 4 external drives again,
    and i found out that i can eject all discs, like said before, but only 2 of the discs are spinning down, after ejecting, BUT only when i use the button "eject" in harddisctoolkit, they dont spin down, when ejecting from desktop (apple+E), and the other 2 of the 4 drives refuse to spin down, after ejecting, even with pressing eject in harddisctoolkit....
    i can also state, that these 2 discs, which refuse to spin down, are FW800/400 discs and connected via FW800. and the 2 discs which spin down succesfully are UBS2 discs, if thats worth mentioning...
    Message was edited by: purepeter

  • My GX630 doesnt work properly on Windows Vista 64 bit

    Hi,
      I have problem with my GX630, its doest work properly at W Vista 64 bit, exactly Sleep mode ... its imposible to awake my computer nd I have to turn it off and than on to wake it up ...
      those buttons Turbo nd Eco mode doesnt work.
      sometimes happen that i get blue error screen and reset but I dont know why ... it wrotes something with some .dll file ...
    some people told me that its error is caused by that thing that there are no drivers for 64 vista yet ...
    I would be pleased if someone could help me up to this topic or to my email (removed to protect user privacy) or ICQ (115-378-414)  thank to all of you Jabu

    "sometimes happen that i get blue error screen and reset but I dont know why ... it wrotes something with some .dll file ... "
    What is the BSOD error code? What .dll ? Write down the exact error.
    Do you OC your notebook?
    "some people told me that its error is caused by that thing that there are no drivers for 64 vista yet ... "
    Install Drivers from MSI web:
    http://global.msi.eu/index.php?func=downloaddetail&type=driver&maincat_no=135&prod_no=1513
    "those buttons Turbo nd Eco mode doesnt work."
    You need SCM: http://global.msi.eu/index.php?func=downloaddetail&type=utility&maincat_no=135&prod_no=1513
    But x64 bit is N/A.
    Why you use x64bit version anyway? Why not 32bit?

  • Geforce 295GTX doesnt work properly.

    I've bought a new 295GTX MSI. I uninstalled my previuos video card drivers, plugged in the new card. Everything boots up wel but once in windows Vista it detects the new hardware but could not recognize it. I installed the Nvidia drivers, they install fine but it's like it doesnt detect the card either. When i go and look to the properties its still using the default vista vga drivers. When I look at the properties there are only questionmarks at the brand name, chipset,... .
    I reinstalled Vista but i still get the same bug. Tried it in Windows 7, still the same bug.
    Tried it in another computer, still the doesnt work.
    P.S.: All power cables are properly connected.
    What can I do?

    Hi Hansie! Give this a try; In 'Change or Remove Programs' (not sure if it is called that in Vista), Uninstall NVIDIA PhysX (if installed), NVIDIA Performance (if installed), NVIDIA Drivers - NVIDIA Display Driver only. Install NVIDIA Ver. 181.22 (use Aaron's link), & reboot, install NVIDIA Utility Package Ver. 6.03. In the NVIDIA Control Panel - 3D Settings - Set Multi GPU & PhysX - 'Enable' PhysX & Multi GPU Mode. Hopefully that fixes everything.

  • My iphone 5 sleep button doesnt work properly. Need help where can i get it fixed

    I bought my i5 in january from croma, delhi and last 5-6 days i am noticing that my sleep button is not working properly on the right side. I searched for solution on the net but all i got to know that this is a problem in iphone 5 and need to be replaced. And i have no idea how to get it fixed or where to contact to get it replaced. Need urgent help.
    Thanx in advance

    modular747 wrote:
    It means that for one year from the data of purchase, Apple will replace the phone with a refubished unit for any malfunction not due to abuse or physical damage (i.e dropping, exposure to water, etc,)
    To be clear, it's a new or refurbished unit, whichever Apple has in the replacement phone stream.

  • Embedded swf not working properly in Safari MAC browser

    hi,
    i created an actionscript which renders a background color for a dynamic text
    This is working properly in ie,mozilla, chrome. but it's not rendering the color in safari mac..
    Does this kind of problem really occur in safari mac browsers?
    thanks.

    Hey, Anybody have solution or Fixed it by Safari Team support ???

  • App_debitcard.2.0.0.tcl - long pound doesnt work properly

    Hi friends!
    I trying long pound in standart application example.
    My incoming call from pots, then i enter pin code and destination number.
    I type pound key at ACTIVE status fsm machine and starts disconnecting process. When outgoing leg is disconnected, command media play streaming _reenter_dest.au in incoming leg (see it in debug), but i listen silence instead prompt voice.
    I can continue entering destination number again, make call and talks, but since long pound detected, i have no voice prompt listning.
    i tried some ioses, c5400-js-mz.124-9.T7 till c5400-js-mz.124-22.T, some other 124 line ioses, no one where long pound works.
    In 123 ios line same application works properly.
    Thanks all!
    DM

    DM,
    The script I'm using, it won't let the call pass through, unless my rate table has the exact number I'm dialing. The rate table has a column called pattern, this where all my int code including the area code are there, and yet I get to put the whole as is to make the call, eg 00114427846789, etc..
    If you can help please, the thing I need to know, do we control that from the script, or is it the billing itself?
    Regards,
    Jassem
    My dial-peers are perfectly ok.
    dial-peer voice 8000 pots
    description ***** INBOUND FOR 02... NUMBER *****
    application byb-cc1
    incoming called-number 92446889
    dial-peer voice 9991 pots
    description *** OUTBOUND 0011 INTERNATIONAL CALLS TO AAPT ***
    huntstop
    preference 1
    destination-pattern 0011T
    progress_ind setup enable 3
    progress_ind alert enable 8
    no digit-strip
    port 0:D

  • Preloader stoping swf from working properly

    have made this external preloader to load my 2mb .swf, and it
    works but when u click on a button the wipe go across the screen
    but it doesnt change the page as you can see this on this link
    below
    Text
    but its supose to look like this example( if you clicked on
    the installs button a 3d amimated wipe will go across the screen
    then it will jump to the Installs page)
    Text
    and i dont know why
    im using the flash 8 Slide presentation template as its
    perfect for what im achive easy to and works fine with out the
    external preloader but if i use the external preloader it stop the
    buttons working by stoping them going to the next page
    the code that tells flash to goto the correct slide is in the
    movie clip where the image sequance of the wipe is and at the end
    of the image sequance i have an action layer which is as follows
    // GoTo Screen behavior
    if((_root.application.Installs != undefined) &&
    (_root.application.Installs != null))
    var screen = null;
    var target = this;
    while((screen == null) && (target != undefined)
    && (target != null))
    if(target instanceof mx.screens.Screen)
    screen = target;
    else
    target = target._parent;
    if(screen instanceof mx.screens.Slide)
    screen.gotoSlide(_root.application.Installs);
    // End GoTo Screen behavior
    and my external preloader code is as follows
    var mcl:MovieClipLoader = new MovieClipLoader();
    var mclL:Object = new Object();
    mclL.onLoadProgress = function(target, loaded,total) {
    loader.percent.text = Math.round((loaded/total) * 100) + "%";
    mclL.onLoadInit = function () {
    loader._visible = false;
    loader.percent.text = "";
    mcl.addListener(mclL);
    mcl.loadClip("kidpower_Web.swf",holder);
    b1.onRelease = function() {
    loader._visible = true;
    mcl.loadClip("kidpower_Web.swf",holder);
    b2.onRelease = function() {
    loader._visible = true;
    mcl.loadClip("2_Web.swf",holder);
    Thanks Martin

    Ok. So after reading through a pile of forum posts and blogs I believe I may have my answer. Though I can't say I like it much.
    It seems that Acrobat does not render video/swf pixels at 1:1 (See This Forum Comment) and the disparity causes the image to appear distorted. The only fix I have really seen so far is to play with the zoom level in acrobat until the image comes into focus. A point that is different on every screen.
    Here are some of the posts I found most helpful:
    http://acrobatusers.com/forum/rich-mediaflash/video-quality-degraded#comment-72985
    http://acrobatusers.com/forum/rich-mediaflash/original-swf-size-distortion-import
    http://forums.adobe.com/message/3379809#3379809
    http://forums.adobe.com/message/3411262#3411262
    I still want to think that there has to be a way to force a 1:1 pixel ratio, but I have not seen any solutions for doing so. There was a suggestion regarding setting the flash stage to NO_SCALE, but I am not entirely sure what the suggested implementation involves.
    I would still love to hear ideas on how to create a better solution to this, but for now I suppose I will have to live with it as is.

  • I "upgraded" to FF4, now it doesnt work properly, wont open pages, will open blank tabs when i click on a link, tried to go back to the older one but that doesnt work now either, have tested it with Safari and it opens everything fine. Any ideas?

    After upgrading to firefox 4 im now having a lot of problems using the browser.
    if i try an open a link in a new tab it will just open up a blank tab, if i click on links or even type in the google search bar at the top it doesnt do anything, it just says "done" and the circle thing stops as if im on the page already, have tested it with Safari doing the same things and Safari works fine. I'd swap but all my bookmarks and passwords are in Firefox so id rather stay with that.
    I tried going back to the older version of firefox (3.5 or something) but seems the bugs are here to stay now.......so.......any ideas? because its really annoying, shouldn't have "upgraded".
    Is there a new patch coming out anytime soon or should i start getting used to Safari?
    Thanks for your help.
    Mark Lavery (Melbourne)

    I would copy over the entire thing if you have room.  With iTunes 10.4 though, you can download any previous iTunes purchases you have made in the past with your current iTunes account.  While in iTunes, look at the left hand side of your screen and select "Purchases" and look at the bottom right corner of the screen and select "Download Previous Purchases".  If you have an iPhone, iPod and/or iPad...you can do the same thing from each device.  Nice new feature...just remember that those ripped CDs need a back-up!!!  Enjoy...

  • Hp Pavilion dv4 Fan doesnt work properly

    I cleaned the fan in my laptop, it was making big noise. I cleaned and put it again, there is no noise now but I think it works slow speed so my laptop is heatining  in a few minutes. What should I do? let me replace to a new fan? also i dont know exactly heat sink, what is that? how can i understand what is the wrong at the fan? it looks like properly works when I take it out

    do you have a comment about trade mark of a fan so i wanna get the non-quality one.
    When i look it the fan, It looks like works normally, Is there any way to understand its wrong? 
    somebody says replace heatsink, i dont know about it, What is heatsink? should i replace it? 

  • SWF not working properly when sent to acrobat

    I am trying to place a simple swf file in a layout but Acrobat refuses to display it at the correct size. It shows me the correct dimensions in the import dialog, but then seems to ignore them. The final placed object comes in at 320x240 no matter what.
    As for where the SWF is coming from, how it was made etc, I have tried multiple methods for making this work. Here's the list:
    1. Created an MSO in Indesign, exported the mso element as a SWF and replaced the swf in the document. FAIL - Transparency breaks and the size is wrong
    2. Retried about 5 versions of the about with opaque background and various sizes. FAIL - same problems
    3. Built the SWF in Flash Catalyst, placed in InDesign FAIL - same problems
    4. Used Catalyst swf, place directly in Acrobat 10. Import works, transparency works...FAIL - always resized to 320x240
    I am using Indesign CS5 and Acrobat 10 on Mac OS X 10.6.6
    I could really use some help here. I placed this same note in the acrobat forums, because I am getting pretty desperate here. I am supposed to deliver the final client file for this project today and this represents one of the key showcase elements!
    Thanks.

    Ok. So after reading through a pile of forum posts and blogs I believe I may have my answer. Though I can't say I like it much.
    It seems that Acrobat does not render video/swf pixels at 1:1 (See This Forum Comment) and the disparity causes the image to appear distorted. The only fix I have really seen so far is to play with the zoom level in acrobat until the image comes into focus. A point that is different on every screen.
    Here are some of the posts I found most helpful:
    http://acrobatusers.com/forum/rich-mediaflash/video-quality-degraded#comment-72985
    http://acrobatusers.com/forum/rich-mediaflash/original-swf-size-distortion-import
    http://forums.adobe.com/message/3379809#3379809
    http://forums.adobe.com/message/3411262#3411262
    I still want to think that there has to be a way to force a 1:1 pixel ratio, but I have not seen any solutions for doing so. There was a suggestion regarding setting the flash stage to NO_SCALE, but I am not entirely sure what the suggested implementation involves.
    I would still love to hear ideas on how to create a better solution to this, but for now I suppose I will have to live with it as is.

  • SWF not working properly after upload

    I have a Flash gallery that works locally but not after upload.  I added several photos to the xml file and only the original 8 jpgs are displayed.
    http://federalhomecompany.com/bricktest/fireplaces.swf
    Here is the html file... http://federalhomecompany.com/bricktest/federSB_portfolio_residential_fireplaces.html
    Can someone tell me what would cause this?  Thanks in advance

    Thanks kglad!!!!
    I actually did upload the pics but the extensions were upper case - all is well now thanks to you pointing me in the right direction
    Happy New Year!!!

  • JavaMail doesnt work properly with locally installed qmail

    'lo ppl
    i have a mail application using JavaMail on a linux box. everything works alright when i use any external host with a different mail server from qmail. but when i configure the program to use localhost (where qmail runs) it successfully sends the mail but it never gets delivered. the mail log says
    Sorry,_I_couldn't_find_any_host_named_xxxx.com?._
    it appends a ? to the hostname but i dont know why. this ? doesnt appear anywhere in the source. for any other programs qmail works absolutetly correct.
    did anyone of you experience the same problem and can help?
    thanks a lot.

    Hi,
    I don't think that it would be the problem of JavaMail.
    I have ever installed James on my win2000 professional
    . And My JavaMail application send mail via James in
    the localhost to the Internet . Such as yahoo, or other.
    But my James could not receive email for me. Because
    it is not set MX record.
    good luck,
    Alfred Wu

Maybe you are looking for