.swf file isn't working in a wrapper that was created in Director::

I'm working with a client that uses an in house "wrapper" that houses their training courses and has some back end reporting built into it.  The wrapper basically is the shell that consists of the navigation so users can get through the different files and courses that are housed within the wrapper.  It's a jerry.rigged lms.  I create courses for this client using captivate 4.0 and publish out to .swf files.  All my files have worked for them.  However,  I have created a new type of interaction for them and it's not working for them once the bring it into the director wrapper.  It's a screen that has 6 clickable areas on it and when the learner clicks, they should get a .pdf document that opens in a new window.  What's happening is the screen shows up, but the documents aren't pulling up when they click on the links.
FYI--the interaction works perfectly until it is loaded into the wrapper.
Any thoughts?
Thank you!

Director mx2004 10.1
You need 10.1.1
This quote is from the download page:
<quote>
Download the appropriate developer update file based on your platform and language of use so you can drag-install the necessary files to update both Director MX 2004 and your Shockwave Player to version 10.1.1. This latest update contains fixes for a number of known issues in addition to providing support for Flash 8 SWF files.
</quote>

Similar Messages

  • SWF file is not working in Portal PROD System

    Hi All,
              We have written custom mxml script in Adobe Flex 3 which displays the list of applications stored in the DB. Then we have posted that .swf file into our Portal KM and then we have created one URL iView with the location from KM.
    These days we are facing issue like the output of the script is not working means the applications are not listed on the portal prod system.
    Whenever the issue arieses we are requested to upload the file once again into KM and it works after the upload been done.
    We are not sure what could be the reason for this issue and I request any one to assist us to resolve this issue.
    Please let me know if you need more info on this issue.
    Thanks in advance.
    Best Regards,
    Vijaykumar K.

    Hi Vijay,
    I belive this should be a portal issue, anyways let me give it a try.
    I never worked on flex in SAP but did similar stuff in portal content development.
    Do you have any traces in that development..?
    Did you check any messages being loged in portal...?
    Check if there is any issue with the file like couldn't recognise a resource from KM which is required etc.
    Cheers,
    Sai

  • Why blocking sites using Hosts file isn't working?

    Hello 
    I need to block a few websites on my home computer. Did a quick search and found out I had to work with the hosts files. So opened up Notepad, ran it as Admin and then opened Hosts and at the bottom added ' 127.0.0.1 facebook.com' then saved the file. But
    facebook is still opening when I go to the page. 
    can someone tell me why  using the Hosts file isn't working?
    I did read somewhere that it might have something to do with security features on my system. FYI, I m using a trial version of Norton Anti Virus and I am running a Windows 7 machine. 
    Thanks. Any help would be appreciated. 

    Are you sure your entry was in fact saved to the hosts file?  The hosts file on my computer blocks unwanted sites.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”
    Yes
    This is a copy paste of CMD.exe. It shows what's in the host files. 
    Microsoft Windows [Version 6.1.7600]
    Copyright (c) 2009 Microsoft Corporation.  All rights reserved.
    C:\Users\mehdi>cd C:\windows\system32\drivers\etc
    C:\Windows\System32\drivers\etc>dir \a-d
     Volume in drive C is Gateway
     Volume Serial Number is B291-A8C6
     Directory of C:\
    File Not Found
    C:\Windows\System32\drivers\etc>dir /a-d
     Volume in drive C is Gateway
     Volume Serial Number is B291-A8C6
     Directory of C:\Windows\System32\drivers\etc
    10/23/2010  01:06 PM               846 hosts
    06/10/2009  02:00 PM             3,683 lmhosts.sam
    06/10/2009  02:00 PM               407 networks
    06/10/2009  02:00 PM             1,358 protocol
    06/10/2009  02:00 PM            17,463 services
                   5 File(s)         23,757 bytes
                   0 Dir(s)  936,919,461,888 bytes free
    C:\Windows\System32\drivers\etc>type hosts
    # Copyright (c) 1993-2009 Microsoft Corp.
    # This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
    # This file contains the mappings of IP addresses to host names. Each
    # entry should be kept on an individual line. The IP address should
    # be placed in the first column followed by the corresponding host name.
    # The IP address and the host name should be separated by at least one
    # space.
    # Additionally, comments (such as these) may be inserted on individual
    # lines or following the machine name denoted by a '#' symbol.
    # For example:
    #      102.54.94.97     rhino.acme.com          # source server
    #       38.25.63.10     x.acme.com              # x client host
    # localhost name resolution is handled within DNS itself.
    #       127.0.0.1       localhost
    #       ::1             localhost
    127.0.0.1 facebook.com
    C:\Windows\System32\drivers\etc>

  • *.swf file doesn't work normally in safari browser

    I'm Flash Mx user and i use it for animation, advertisement, banner on the web.
    *.swf file works well in explore, but not in safari browser.
    So I cann't see the flash contents(*.swf) in safari, even if flash player v11.0 is installed.
    I mean *.swf file dosen't work normally.
    Please let me know the reason.

    Hi..
    See if this works for you >  http://techtips.salon.com/download-swf-files-mac-1619.html

  • SWF Files do not work in Firefox. My sites work fine in Explore & Safari? Why is this? I have updated all my plugins, reinstalled yet still nothing?

    SWF Files do not work in Firefox. My sites work fine in Explore & Safari? Why is this? I have updated all my plugins, reinstalled yet still nothing?

    Can you post a link?
    Does that only happen on that website or do you have that problem with all Flash content?
    Reload web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Swf file does not work from InDesign

    I am not sure if this is a Flash or InDesign question, so i will post on both..
    I am trying to embed an “animated” swf file (that was created in flash) into an InDesign layout and then export the InDesign layout to swf. in the resulting html file my navigation works ok but the swf file does not play “animate” when viewed in html or flash. It only shows up as a graphic. 
    I have tried exporting the ID file to xfl and bringing it into flash but then none of my animation works. What am I doing wrong?
    any help would be appreciated.
    thanks
    mattG

    You´re doing nothing wrong. SWF export of InDesign CS4 doesn´t support any media files. You can place videos, sounds and animations into indesign layout, but if you export to SWF, they won´t work in resulting SWF. They work in interactive PDF.
    And you can export your basic layout to Flash CS4 by using XFL export and import those media elements in Flash, but that may be quite a job. I have been strugled a lot with that method. My files used to go really messy when I open them in Flash.

  • I need help my computer isn't working and there is no was to get on my iTunes and I just updated my phone and now it's stuck on where it shows the plug connected to iTunes help!!!!

    I need help my computer isn't working and there is no was to get on my iTunes and I just updated my phone and now it's stuck on where it shows the plug connected to iTunes help!!!!

    There is no other way than to plug into a computer to restore the phone. You can use another computer to do so, but in case you did not back up to iCloud your data and settings will be gone.
    Follow this article to connect in recovery mode:
    iOS: Unable to update or restore

  • I upgraded to 7.0.4 on my iphone 4s and now it isn't working and itunes states that it is recovery mode - help

    I upgraded to 7.0.4 on my iphone 4s and now it isn't working and itunes states that it is in recovery mode - help - I don't want to do a factory restore!!!!

    If you're phone is in recovery mode, then all your data is already wiped off.  you'll need to proceed if you want to use your phone.
    However after it is done recovering, you can restore back from your backp.
    You do backup on a regular basis right?
    http://support.apple.com/kb/HT1808

  • I recently transfered everything from my emac to another one but now when I try to open iTunes I get the window that states: The file "iTunes Library" cannot be read because it was created by a newer version of iTunes.

    I recently transfered everything from my emac to another one but now when I try to open iTunes I get the window that states: The file "iTunes Library" cannot be read because it was created by a newer version of iTunes. The computer I transfered to had a bunch of files on it and I got full ownership of what was already there, so, how do I get to my iTunes library, I do have access as an administrator to the iTunes library (that works just fine) already there and I guess I must have had a newer version ofiTunes on my defunt eMac....

    Tell us some version numbers please, of your Mac OS versions and iTunes versions on both computers (two eMacs yes?).
    dlrobinson49 wrote:
    I guess I must have had a newer version ofiTunes on my defunt eMac....
    That is a pretty good guess.Try updating the second eMac's iTunes to at least the version that was on the first.

  • Error message the file "itunes.itl" cannot be read because it was created by a newer version of iTunes.

    I had to do a system recovery with a prior date.  now I get an error message: the file "iTunes.itl" cannot be read because it was created by a newer version of iTunes.  Anyone have a solution?

    I know this is an old thread, but the information in it solved my current problem (Windows Vista, upgraded to iTunes 11.2 and resulted in this same .itl error message).
    So, I'm here to thank turingtest2 for his excellent instructions to fix my problem. One of tt2's many detailed instructional tips). THANK YOU TURINGTEST2!
    PS I'm generally reluctant to "mess with files and such, preferring to use Windows Restore, because it just doesn't seem right to me that end users of Apple devices should have to get into the guts of files and such. Sadly, I have finally just accepted that iOS updates never work right and I either have to deal with work-around fixes or never update. Eventually we do need to update or there will be other problems. All I can say is, I'm sure glad there are folks like turingtest2 here who spend so much time helping us.

  • The file "iTunes Library" cannot be read because it was created by a newer.

    Hi experts,
    I wonder if someone out there can help me? I had a bit of a problem with my new iMAC and it had to go for a quick fix. Nothing was lost during the fix, no music, no photos, no programs, but when I now open iTunes I get the message
    +The file "iTunes Library" cannot be read because it was created by a newer version of iTunes.+
    Can anyone help me fix it so that I can open iTunes please?
    Thanks
    Martin

    Click on the item in the Finder's sidebar named Music, rename the iTunes folder inside when iTunes isn't running, launch iTunes, and drag it into the open iTunes window. This won't preserve playlists or other metadata.
    (40854)

  • After mixing a project i select bounce and burn the disc that is burned plays on any cd player but when i try to burn the wav or mp3 file that was created the resulting disc will only play in a computer this also happens with video projects help please

    after mixing a project i select bounce and burn the disc that is burned plays on any cd player but when i try to burn the wav or mp3 file that was created the resulting disc will only play in a computer this also happens with video projects help please are there any settings i need to alter as it seems the wav or mp3 file i ceated is being converted to a data file somewhere between the folder and disc drive

    Same thing for a movie file.. If you want to play back the movie via a DVD and a DVD player you must create a Movie DVD  and not just burn files to a data DVD... as Data DVDs are just storage devices for files and therefore will only work with computers...
    Movie DVDs are special formats that include things like menus and special file formats.. so they can playback via a DVD Player...
    You will need a 3rd party DVD Burning app like Toast which is what i actually use.... or the more popular DVD Creator app...to create and then burn a Movie DVD that will playback on a DVD Player....
    https://answers.yahoo.com/question/index?qid=20101220205435AA70beb

  • When i try to open itunes on my mac a message comes up saying The file "iTunes Library" cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?"

    When i try to open itunes, a message pops up saying "The file “iTunes Library” cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?." I have tried downloading the newest version of itunes but it still won't open. What should i do?

    Update your copy of itunes to the current version.

  • After years of using iTunes on my G4 suddenly it won't open.  Error message says "The file "iTunes Library" cannot be read because it was created by a newer version of iTunes".  What do I do?s

    After years of using iTunes on my G4 suddenly it won't open.  Error message says "The file "iTunes Library" cannot be read because it was created by a newer version of iTunes".  What do I do?  I have been attempting to move my Library to a newer MacBook Pro.

    The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
    Try the following user tip:
    Empty/corrupt iTunes library after upgrade/crash

  • The file itune library cannot be read because it was created by a newer version of itunes

    The file itune library cannot be read because it was created by a newer version of itunes

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

Maybe you are looking for