.swf files opening issues

Upon opening .swf files I get open or save as options. I have tried all the fixes I could locate nothing is helping. I have even tried to reinstall the flash player program. I can play the files from the site but after downloading them I can no longer play the files from my desktop without getting the open or save as options like it is trying to re-download the same file. This repeats non-stop. I have checked the options in tools however I can't seem to change or reset any of the things for .swf files. One of the options for the file targets shockwave flash, which I have installed but the other says always ask. I can't change it to firefox, if I set it to IE it repeats the open or save as options like it does in firefox. I can't seem to locate any program to open the file in firefox.
Before the last few updates I use to just be able to click on a .swf file and it'd open in firefox without issue. I'm not sure what has changed within the last few updates but now I can't open .swf files unless I do so from the site I downloaded the file from.

@ CoryMH, the only things located in the content tab of the options is the following: Block pop ups, Fonts& colors, and languages. There is no options within the content tab of tools>options>content. Even though your advice was not helpful to me in any way I still thank you for trying to help resolve this matter.
@ cor-el, I have just managed to find the mimeTypes.rdf file took me a few hours as it was not where those links said it would be. For my system it was C:/users/username/appdata(hidden folder)/local/mozilla Sadly the links said it's be %APPDATA%\mozilla\ upon which is an invalid address on my windows 7 system. Not sure why it's different but I found it. I am hoping now that I located the file that your advice fixes the problem.
Edit 1: cor-el upon restarted after removing the file you mentioned did in fact reset everything. All of my flashes are asking what I want them to open with once more. Upon opening them on Firefox I can see them instead of the open with or save as options. So your advice did indeed work. Thank you.

Similar Messages

Swf file opens in IE but not in firefox

I have windows xp and flash player9. I created a swf file and published it for flash player 9 and ActionScript3 and embedded it into a web page. It opens nicely in IE8 but when I try to open it in firefox 3.6, I get the message "Content of this page requires a newer version of Adobe Flash Player" and a little box invites me to download.
I tried publishing for flash player 6 and ActionScript2, but get the same results.
Any help would be very much appreciated.

I can't say if this will fix it, but you can try putting quotation marks around "_blank"... it is a String argument so it should be quoted just like the URL is.

SWF Files open in OS X but won't open in Windows

Hey everyone. I'm a bit of a novice to Flash so please play
nice. Anyway, I have a .swf file that I created in Flash CS4 and it
plays great in OS X. It's actually a video controlled by a media
controller (my publish setting are for player 8.0). When I boot to
Windows XP and try to open the file using several different stand
alone players (8,9,10) I only see a white background and no movie.
Does anyone have a suggestion for me? I'm goin' crazy.
Thanks,
Solan

Is windows fully updated with all required codecs? If you
send me the link over hotmail I can see if I can open it!
[email protected]

Excel for Mac File- Open Issue after latest OS X update (Yosemite)

Using Excel for Mac 14.4.8 (on OS X Yosemite 10.10.3) always defaults to the Documents directory when using File->Open. It will not remember last directory a file was opened from. Has anyone else experienced this? This did not happen
before the latest OS X update.
(If this is not the right forum, could you please tell me which forum is for Excel for Mac questions.)

Hi
This is the forum for discussions about Excel development (VBA, automation) on Windows platform. Since your issue is about Excel on Mac OS ,I will suggest you posting this thread on Office for Mac so that you will get more effective and more professional
help there.
Office for Mac: http://answers.microsoft.com/en-us/mac
Thanks for your understanding.
Best Regards
Lan
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

File Open Issues - document library pdf file to open in new browser window

Hi
I have a requirement to open the document library containing pdf file to open in new browser window. So far I have tried following steps but could not get it to work.
1. Changing Document library advance setting to open the document in browser (have tried others as well).
2. SharePoint web application setting changed as Permissive instead of Strict. Here the pdf file opens in browser but redirect from document library instead of new window(Also tried adding Target=”_blank” and no change).
3. Executed the powershell script to adding MIME type to see if it works but no change.
$webApp = Get-SPWebApplication http://SharePointSite
If ($webApp.AllowedInlineDownloadedMimeTypes -notcontains "application/pdf")
Write-Host -ForegroundColor White "Adding PDF MIME Type..."
$webApp.AllowedInlineDownloadedMimeTypes.Add("application/pdf")
$webApp.Update()
Write-Host -ForegroundColor White "Added and saved."
Else
Write-Host -ForegroundColor White "PDF MIME type is already added."
4. Open the Doc library and modified ALLItems.aspx to add Target= “_blank”
5. I have already tried solutions suggested in the link:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/9db08c4a-b53c-419a-84f8-001c194d1311/how-to-open-sharepoint-document-library-pdf-file-in-new-window?forum=sharepointadminlegacy
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/530e2ea1-d77d-491c-935f-04f536e439a5/open-a-pdf-document-to-a-new-browser-in-the-document-library-web-part?forum=sharepointadminlegacy
http://mindsharpblogs.com/todd/archive/2005/08/16/654.html
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/7b6091df-4657-4799-ba02-259ebd7e4b7c/pdf-doesnt-open-in-document-library?forum=sharepointadminlegacy
Appreciate if there are any working solution from any of you. Many Thanks

I found a solution which works only in the development. No idea when I compared, Browser MIME type is enabled, STRICT browser type is configured for web application. on the document library advance setting, default to open in new browser. Both configurations
are identical but I am able to open pdf file in new window in my developing using jquery script
http://blog.ithinksharepoint.com/2011/02/21/open-pdf-files-from-a-document-library-in-a-new-window/ but the same does not work on production server :(
Any help experts?
Thanks

Want to hide mouse, then show it when new swf file opens above the movie?

Hi,
I am using a magnifying glass animation for my portfolio and I want he mouse cursor to hide, which I can work out with:
Mouse.hide()
But when someone clicks on a section it then loads a swf file above the original movie so I then want the mouse cursor to show but i'm not sure what the code would be for this?
Also then once they press on the close button of this swf file with:
on (release) {
unloadMovieNum(1);
_level0.enableBtns();
I want the mouse cursor to hide again becuase they are on the main movie again. Any ideas??

use Mouse.show() when you want the cursor to be shown and Mouse.hide() whenever you want to hide the mouse.

Cross-platform file opening issues?

Hi all,
I have created some files in CS3 on a Mac (OS 10.5.8). They are fairly simple manual pages, just text, no graphics. I’ve sent them to a colleague to open on his PC, also running CS3, but he can’t open them – he gets the message ‘Cannot open file. Please upgrade your plug-ins to the latest version or upgrade to the latest version of Adobe InDesign.’ He has patched his CS3 up to the latest version.
I don’t have CS4 on my Mac so they are definitely not in a later version of CS. I am also running only the standard set of plug-ins that came with the application: I have tried configuring the plug-ins to only load Adobe and Required to ensure there are only the standard plug-ins in use. I have tried copying the content into a new document and also making the only font used Arial, in case there is a Mac – PC font issue.
The file names are in the format Quality System.indd I have also tried adding underscores instead of spaces, e.g. Test_Page.indd
Can anyone give me any ideas?
Many thanks,
Al.

Mr. Met wrote:
You and the other person don't have the same version of ID. Have him send you a file he originalted on his PC. If you can open it, then for sure he has an older version of ID. Have that person look under properties to see the version of ID he has.
Whiskey Tango Foxtrot? If you can open it it only tells you that your version is not lower, not that his is lower.
Have the PC user go to About InDesign user, I believe, the Help menu. Have him tell you the version number. It is probably 3.0X, which is CS.
You’d think at least one person at Adobe would have he three-digit IQ needed to see his problem coming years ago when they decided to call everything CS. You’d be wrong.

File Open Issue

I have been working on a Captivate Presentation project for
two weeks and suddenly it says it cannot open my file because it
may have been corrupted. It takes really long to open the 584 mb
file.
I don't understand. All the open and save i have done were
completely normally and successfully, but still i can't open the
file now. Is there anything i can do about it? Please help.

Hi there ttdevelop
Sorry to hear about your issues. Your file is quite large.
How many slides do you have? I'm guessing more than 50-65, eh?
That's the typical (and very broad and general) "upper limit" we
normally recommend. While I've never called Tech Support, I've seen
others report back here that Adobe Tech Support is advising that 50
Mb should be considered an upper limit as far as file size goes. So
you are beyond that. Additionally, where is your project located?
If you aren't storing your project on the local hard drive (C:\) it
is likely to corrupt. So if you have your project on a LAN drive,
you need to work locally.
All of this doesn't really help the immediate need, does it?
Those are things to keep in mind for the future.
Here is what I would try and in the following order.
* Before attempting things, if your project is on a network
drive, copy it to your local PC before continuing.
1. Simply close everything down and restart the PC. After
restarting Captivate, see if you are then able to open your
project. Sometimes that will help.
2. Assuming that fails to work, hopefully you have a backup.
If so, restore from the backup and continue.
3. If no backup was made, as a last resort you can try
creating a totally new project that is blank. Ensure the size is
identical to the one you are having issues with. Then, from the
new, blank project, click File > Import > Slides/Objects and
point at the errant project. If the Captivate Deities are with you,
you will recover the project.
4. If all that fails, poke around in your project folders.
You may get lucky and find a temp file to recover from.
If those steps fail, I'm afraid it's likely you will have to
start over.
Cheers... Rick

PDF File opening issue

Hi guys,It may be a simple issue, but I am not able to find why it is happening.I am trying to open a file from our file server. File path:Z\Fileshare\folder1\folder2\folder3\folder4\folder5\Filename.pdfEvery time I try to access it I get an error message.If I copy that file to my Desktop or even copy it to a folder back that isZ\Fileshare\folder1\folder2\folder3\folder4\Filename.pdf it works. All other PDF's in the Folder5 works fine. SO I copied the Filename.pdf to my desktop. Created a Test folder under Folder5. Open the Filename.pdf from my desktop and Print as PDF and saved it to Test folder. Navigate to Test folder and tried to open it. GotSame error message.Open Event logs. The only event under Application logs for Acrobat is:
"The description for Event ID 0 from source Adobe Reader cannot be found. Either the component that...
This topic first appeared in the Spiceworks Community

Migrating your database to a new datacenter can be a high-risk and time-consuming process. A database contains state, and can be much harder to migrate as compared to web servers, queues or cache servers.In this blog post, we will give you some tips on how to migrate your data from one service provider to another. The process is somewhat similar to our previous post on how to upgrade MySQL, but there are a couple of important differences.
This is the seventh installment in the Become a MySQL DBA blog series. Our previous posts in the DBA series include Database Upgrades, Replication Topology Changes, Schema Changes, High Availability, Backup & Restore, Monitoring & Trending.MySQL Replication or Galera?Switching to another service provider (e.g., moving from AWS to Rackspace or from colocated servers to cloud) very often means one would...

Regarding PDF files open issues

Hi, I am Anurag Tiwari working as a Portal Administrator for Sunchemical Portal. We are facing some issues while opening PDF documents through portal. The PDF documents are able to open without logon to portal, through the 'http' link associated with the document, even though we cleared the PTCache then also it's happening the same. Please can you raise this as a high priority call to provide a better solution to us?Kindly advice us and please revert us back on this. NB: Our Portal version is 4.5, SP1.Thank you.Best Regards,Anurag TiwariPortal Administrator

Paul,
These PDF files are opening at any domain doesn't need any authenticated to portal. One important point is that all our files including the pdf one is in the https response. But other is not opening, only PDF causing this problem. We have checked this with version 5.0.2, this is not happening.
e.g: https://<myportal>.com/portal/PTCache/<file name>.pdf?ID=<document ID>&PTToken=pv_conflate&Name=.pdf, this is the generated URL syntax. Whether the naming convection for PDF documents are single/multi-word with space/underscore between them, doesn't effect.
We thought due to PTCache this might happen, so we cleared the PTCache, still it persist. If this is a configuration issue then please provide us a remedy for patch up.
Our file server and portal server are different. Please help us in this issue; we are not getting any solution on this.
Further, let me know if you need more information.
Thanks & Best Regards,Anurag TiwariPortal Administrator

SWF file opens in safari / firefox but not IE

Hi.
I was wondering if someone could help me. I'm working on a flash project that people can download from the internet and use or just use on the internet. I'm have a problem with one of the links however. Its a button that is to link to a excel file, at the minute the following code works in safari and forefox, it opens the file pefect in a separate window, but in IE it opens on the same window. does anyone no what the problem could be? The code i'm using is
on (release) {
getURL("../docs/OIA.xls", _blank);

I can't say if this will fix it, but you can try putting quotation marks around "_blank"... it is a String argument so it should be quoted just like the URL is.

File open issue, after file deleted. fopen status is failing in VC++

/* fopen example */
#include <stdio.h>
int _tmain(int argc, _TCHAR* argv[])
FILE * pFile;
for(int i=0; i < 1000000; i++)
            bool ret = remove("C:\\abc.txt");
            pFile = fopen ("C:\\abc.txt","w");
            if (pFile!=NULL)
                        fputs ("fopen example",pFile);
                        fclose (pFile);
            else
                        printf("%d fopen() fails \n", count);
return 0;
Here, after remove is called, pFile = fopen ("C:\\abc.txt","w");is called,
Sometimes even in C:\ the abc.txt file is not present after remove called, but the fopen pFile pointer is null.
This is reproduced some times not always. In this example this issue is reproduced 50/60 times.
Please suggest some solution.

Hi,
Please post in following development forum about VC++ issue:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vcgeneral
Alex Zhao
TechNet Community Support

Acrobat Pro file open issues @ VDI

While opening PDF file in Acrobat Pro 9 under the VDI user environment, the Acrobat starts and automatically simultaneously closes without any error message.
Opening the same file in Acrobat reader becomes without any problems.
We use VDI based on Citrix XenDesktop v.7.5;
Hypervisor - VMWare vSphere v.5.0.1U1;
MS AD - W2k8R2
User Virtual machines based on OS Windows 7 (32 bit);
All User files are stored on file server, which are provided by storage EMC VNX5400 and accessible through CIFS protocol. We user folder redirection for user folders

Unsupported configuration: 12 Citrix Deployments — Enterprise Administration Guide.
Ben

Endless loop on file opening issue in MS Word 2011 pro on Mac OS Mavericks

MS Word 2011 Pro on Mac OS Mavericks.
The problem:
When open Word (Office 2011 on Mac), it will start opening all previous files on the mac until it crashes with error. The problem duplicates when force quite MS Word. Reinstall Office 2011 won't fix it. Deleting com.microsoft.word.plist won't help. No duplicated
fonts in Fron Book. Did not know what caused this problem. Excel works fine. This is a problem only appeared on Word so far.
Any help is appreciated.
Thanks,
Liyun

Hi,
We provide support for Office programs on Windows in this forum, since you are using Word 2011 on Mac, to get a better assistance, please post the question to Office for Mac forum:
http://answers.microsoft.com/en-us/mac
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Melon Chen
TechNet Community Support

Re: PDF file opening issue

Dear Sheena,
We really appreciate your quick support here.
The link you have provided worked as a charm...:-)
Now what if i have already opened one pdf document on my local system and trying to print the pdf file through c# ??
I am getting the attached error. If you please help me to resolve this i will be a big fan of yours.
Pramod koshti.

Dear Professionals/ Expertise,
We are using the attached version of the adobe reader. We are trying to print the pdf documents through c#, here we are not able to print the documents silently in the background.
Moreover, we are getting the error "There was an error opening this document. Access Denied."
I really appreciate your quick support here. Thanks in advance.
pramod
This topic first appeared in the Spiceworks Community

.swf files opening issues

Similar Messages

Maybe you are looking for