SWF import in Captivate / problem synchronizing
Hi All,
I tried to import a SWF movie into a newly created captivate
movie. In FLASH I have a framerate of 8 ps, which means my movie
should last about 25 seconds. Now, when I import it into Captivate
the movie only lasts 6.9 seconds and my animation goes nuts. (
Tweens are not very nice when they flash by in 0.2 seconds :-) ).
Can anyone tell me what I am doing wrong or how I can prevent
Captivate from shortcutting my swf-movie ?
Hi sdanckaarts
Captivate normally operates at 30 frames per second. So it's
no surprise that you are seeing what you are. You are taking
something designed for 8 frames per second and running it at 30.
Hence looking a bit like it's had about four shots of espresso!
You have a few choices. Increase the Flash frame rate to 30
frames per second, re-publish and re-insert in Captivate. Or reduce
Captivate to 8 frames per second. Or maybe a little on each end.
To change Captivate's frame rate, click Edit >
Preferences... > Project node. (Captivate 3) or Project >
Preferences... > Project tab (Captivate 2).
Cheers and best of luck in getting the result you want...
Rick
Similar Messages
-
I've 5 captivate problems.
hi everyone,
i'm ivano and i'm here to ask you about my personal 5
captivate problems.
my english is bad..so i hope you understand what i write (but
there's anyone who speak italian i write in my language..i hope
this!!)
1. TEXT IN THE BUTTONS : when i build my pages i see the text
in the button in the right position, but when i publish i see them
in bad position..a bit moved from the original position. how can i
do?
2. BUTTONS CLICKED : when i clink on a button in my captivate
project and after a navigation i return in the page where is the
button, it is in the state DOWN as pushed. what i have to do?
3. LOOP : can i use an mp3 file (6 seconds) for my work?
there are specifically options to learn? please show me the right
way.
4. SWF LINKING : i've done a project with captivate files
(quiz, elearning, pages) and simply flash pages. i've seen that if
i link from a movie to another, it appears in my internet browser.
if i publish (in standalone..) all the files and link one another
they'll be opened in the same window..but so i have many EXE files
in my project. how can i have less files to linking? there is a
macromedia product which manages more files in the same work and
link one-another? thanks.
5. CAPTIVATE SAMPLE : i have to do e-learning slides as in
the captivate sample. which is the correct option? assesstement,
training or demonstration? and what's the differences? it's very
important for me..thanks a lot.
i hope my english was clear..
and i hope anyone answer me soon..it's very important for me.
thank you all for your patience and disponibility,
ivanoHi Ivano,
I'll try to answer a few of your questions to the best of my
ability.
1. Text Positioning in Captions:
You can do simple formatting for text in the captions,
basically center, right, and left justify. If you change the
physical dimensions of the project file these captions will also be
changed, often they need re-positioning. If you must change the
dimensions of a project, do it early on or accept having to go back
in and re-work the captions.
Also, the distance the text is from a caption "side" can be
changed by going into the "Gallery/Captions" directory in the
"Program" directory and modifying the .fcm files with a text
editor.
2. Buttons Clicked:
I'm not certain as to what you are asking. You can change
some of the button characteristice in the timeline, provided you
are not working on a question slide (those are not easily changed).
3: MP3 Loop:
6 seconds of a loop would mean each slide has a duration of 6
seconds and have no stops. You could have a stop corresponding to
the end of a audio stream. In other worde your MP3 plays for 6
seconds and stops and waits for a user response. I'm not aware of a
way to have the loop keep playing while the slide is waiting for a
user response.
4. SWF Linking:
Again, I am not sure what you are asking. However, the swf
linking with web files is much less a problem than trying to link
exe files. Have you tried publishing web filed to a CD rather than
using EXE files?
5. Assessment, Training, or Demonstration for E-Learning:
Any of these three have their purpose in e-learning. With
each of the 3 types of scenarios you might want to have certain
things automatically added to your slides. (All of these
automatically added items are editable. It is meant as a time
saving feature for the author.) For example in a demonstration or
training, you might want to have a mouse cursor automatically
moving around, on an assessment you would not. Each one of these 3
types of e-learning scenarios can be changed by clicking the "Edit
Settings" button. It all depends on exactly what you want the end
user to see and experience. For this my advice would be to write a
"script" to follow and list the type of interactions you want to
use. Then click the Edit Settings button and see which options are
automatic, which ones aren't, then add what you need. Try a few
different combinations and see what they produce.
TPK -
I have several .swfs created in Captivate 6.0 that I would like to use in my Captivate 5.5 project. Will this work?
I was hoping I could insert them as animation.It is already VERY risky to insert a Captivate created SWF into a mother Captivate file, will often lead to lot of problems because Captivate files are not designed to be used that way. And in your case my intuition tells me it would even be worse, because there were significant changes between 5.5 and 6 (themes is one of them).
-
Importing other Captivate Slides
When I import other captivate slides or objects into my
current project, if I try to save after that point, my system
becomes unstable and Captivate comes up "Not Responding" and will
not close by any means other than a system restart.
Anyone else have this problem?
Solutions??I am having the same problem. When I import a slide, any
slide, and try to save the project with the imported slide, the
application goes, really, really, slow. My computer has 1GB of Ram.
When Windows XP is finished loading, I still have 500MB of RAM for
applications. I also checked to make sure this incident was not
isolated on my computer. So I installed Captivate 2 on another
computer with 1GB of RAM and it still had the same problem I
described above. The funny thing is, if I leave my computer on
overnight, the import finally works. But that is absurd, Captivate
2 users can't wait more than 5 min for a slide to import. Somebody
help me! Is their an upgrade I am not aware of? -
Control volume for an embedded swf file in Captivate 5
Hello everyone -
I have just searched the forum but cannot find anything on controlling the volume for an embedded swf within Captivate 5. The cap 5 palyback controls will not be used. Is there a way to control the volume ? I found info for AS 2 bur not as 3.0
Thanks much
RickI tried this as a solution:
I imported the .swf file to Captivate. I tried to then publish the file as as .FL4, to then reimport into Captivate.
That should give me the option to control the entire movie (sound and video) using Captivate playbar.
BUT, when i try to publish as .FL4, only the sound published, not the video.
Any suggestions?
(i have searched this site and the web in detail and have not fouind a solution),
tallis lockos -
Multiple SWF import throwing audio off
I created seven separate SWF files in Captivate 3 that I want to compile into one video. I created the "player" shell with seven slides so I could insert the SWF file as an animation on each slide. When I insert the initial two files, the audio plays correctly, however, when I insert any additional files, the audio for later SWFs is played instead. All of the files are less than 5 MB, with most below 2 MB.
I would appreciate any assistance.
Thanks,
ToddHarringtonTalents wrote:
Is there a way to export a FCP movie with multiple audio tracks? Example: If i have 3 audio track of stems (voice, music, sfx) I would love for them to exist as say different channels in one file This way down the line, say I want to remove the music, i can just turn off the channel. Or import the FCP movie into a sequence and have the three audio track mono, rather than a stereo mix-down.
I take it you're looking to export to a QT file, then yes, you can most definitely do just this. But first you need to setup your sequence correctly:
With the right Timeline open, go to Sequence Settings, then select the Audio Outputs tab
Change the output number from 2 to 4.
Adjust the available tracks' Grouping from stereo to dual mono (Very important!) then close out of Sequence Settings
Now - and this is the part I always forget - you'll need to actually route the tracks to those specific outputs. Right-click in the control area of the timeline (anywhere where you're not over a lozenge, lock or autoselect button) and make sure that the extra tracks (past 1-2) are routed to the correct output. That is, right click in the space to the left of A3 and in the shortcut menu, select Audio Outputs > 3. And so on.
Now, when you attempt to Export > QuickTime Movie using Current Settings, you'll get a 4 channel QT file. Unfortunately you can't do an odd number of channels (like 3) but most folks who do this do 6 channels (stereo pairs for dialogue, music and effects). -
Importing Adobe Captivate into Robohelp 6
When I try to import Captivate files into RoboHelp it seems
like the import was successful, but when I try to view it the
screen is blank. I any new to working on Captivate as well, but I
beleive everything is ok on that end.
Any ideas?Hey Colum,
Thanks for your help, but I still seem to be having
difficulty.
I am using RoboHelp HTML 6 for my project.
Here is what I have done:
Created my Captivate file & saved it.
Imported the Captivate file in my Baggage Folder.
Problems are:
When I double click on the file in Baggage it opens up
Captivate.
I then tried to import the same clip into a New Topic, but
again all I get is a text box saying Flash Movie File. I compiling
the porject, but when I try to click on the topic with the
Captivate file, but the page freezes. When I mouse over the text
box it says "Click to activate & use this control."
Any help would be great.
Thanks -
I have my iTunes music folder stored on an external hard drive. I recently purchases a new Mac. After attaching the external hard drive, all songs imported without a problem except my playlists. Any clue about where they are or how to revive them for use on my new Mac?
Thanks!Rysz wrote:
To retain your playlists, artwork, play counts, etc, you need to move the entire iTunes folder, not just the music files..
Correct.
After that just select the new folder location in iTunes> Advanced settings.
Incorrect.
Hold Option and launch iTunes.
Select Choose library and select the iTunes folder.
This will read the iTunes library.itl file in this folder and the library as it was previously will be opened. -
Cannot import from catalog, LR quits and I get about 2 or 3 photos imported.
Adobe was no help, they had no idea why.
Have tried to "import from Cat" twice. Moving two different catalogs into my main desktop catalog. Both did not work.
All three catalogs ( two from laptop and my main LR cat) work fine and I can import photos no problem.
Would like to import all the changes of photos that I have made with these two catalogs that I did on my laptop. (Both cats are on an external hard drive).
Thoughts anyone?
I am having some issues with my video card. Screen right now is a bit pink. This would be the fourth video card I will need on this Mac Pro. Would this be the cause?
Thanks.flyboys911 wrote:
Do I need to export the laptop cats if thy are already on a separate hard drive?
It might help. Exporting a catalog sometimes cures corruption in the original catalog. Try exporting into a new catalog and then importing the new one on your desktop.
Never heard of the last thing you mentioned. Can you describe more?
Lightroom has a preferences file, which sometimes gets corrupt and can cause all kinds of weard behaviour. You can delete (or rename away) the preferences file, and LR will build a fresh one when started. If you rename it, you will still have it if you decide you want it back.
To rename the preferences file, rename the file
"[username]/Library/Preferences/com.adobe.Lightroom3.plist"
to something like
"[username]/Library/Preferences/com.adobe.Lightroom3.plist.old"
while LR is closed and restart LR.
Beat -
Problem synchronizing with iPod
A user is have quite a few problems synchronizing with his iPod.
He is only able to sync if he logs in as an administrator (he has two accounts on the machine), runs iTunes, cancels the sync (the administrator account doesn't have the music files), closes iTunes, logs on again with his regular account, and opens iTunes again.
It seems to be a permissions issue, but he does have administrator permissions on the folder when using his regular account.
How should iTunes be set up so that administrator permissions aren't needed to sync with an iPod?
In addition, is there a way to update iTunes software via the updater without administrator permissions?Is Fast user switching enabled on the PC?
Checking on this because iTunes doesn't like Fast User Switching on XP or Vista. See:
iPod for Windows: Fast user switching in Windows XP and Windows Vista is not supported -
Problem synchronizing contact birthday into the ca...
Hi Nokia,
I have a problem synchronizing the contact birthday into the calendar
Need help Please.
//AbdouI’ve had another look at this.
I was wrong about the birthday in the contact taking you to the most recent one; not sure what I did but it was finger trouble.
Unfortunately, it has just reiterated the original problem.
For example, there is a contact in my list with a birthdate of 3rd December, 1958.
The Birthday field in Google Contacts shows 3rd December 1958.
The Birthday field in N9 Contacts shows 4th December 1958.
When you open the Contact page to edit the individual fields and tap on the Birthday field, it takes you to December 1958 and highlights .... the 3rd!!
I clicked on the 3rd and then saved the changes to the Contact Birthday field in the N9 and it still showed the 4th.
I have had auto time update ‘ON’ and ‘OFF’ and I have changed the time zone in my phone from GMT+11 in increments to GMT-4 and nothing changes in the Birthday field.
It looks like the error lies in the birthday coding.
Nokia????? -
Bringing Flash .swf files into Captivate
Greetings,
I use Captivate 2.0. I have been trying to bring a Flash .swf
file into Captivate with very little success. The flash file is
clickable (so that users can review case study information as they
complete Try It simulations). When I bring the Flash .swf file into
Captivate, it works. However, correction (or failure messages)
display every time the user clicks the Flash .swf file. Is there
anything that I can do within Captivate to stop this issue?
Ideally, I would like the Flash .swf to run on top of the Captivate
file so that users can view the case study details without having
to see the failure messages.
Please let me know if you have any questions about this. I
hope it makes sense to you.Hi Zabcde (or PMW or P?)
Can I just understand (sorry for being thick) your situation.
You're trying to get a flash movie into a captivate session that
the user can work on, see, interact with whilst they're also going
through a Captivate simulation (try it)? Does that mean that slides
are advancing for the simulation whilst you're watching the flash
movie? Or are they watching the Flash movie as a kind of help to
then go and do the Try It session?
If it's the first, then I would suggest calling the Flash swf
and the Captivate swf as seperate instances in flash (using
loadmovienum or something). If it's the second, you should be able
to remove the failure captions from that slide so they don't bug
you.
Apologies if I've got the wrong end of the stick though
Cheers
AJ (jiminiCricket) -
Hello again
I have a flash anination that works perfectly fine when
tested as stand alone, but when imported into Captivate give an
error message:
TypeError: Error #1009: Cannot access a property or method of
a null object reference.
at Testx_fla::MainTimeline/MouseClick1()
what should one be looking into to understand the possible
cause?
many thanksIt''s an ActionScript 3 compiler error as far as I can see.
Just checking but since this is an AS3 Flash component are you publishing your Captivate project as AS3?
/Michael -
Can InDesign CS6 export/import to Captivate CS6?
I am particularly interested to know if iPad content can be designed using InDesign CS6 and then exported or imported to Captivate CS6?
Is this possible?You might get some answerrs on the Captivate and InDesign forums...
Mylenium -
I can't import my photos from my digital camera (Sony) to my iPad, this problem is recent. I have imported photos without problem a problem before. Is this problem due to the IOS 6 update? How can I fix it?
I have the same problem and apple needs to fix this - but in the mean time you can manually select the vertical photos then "import - import selected" and you can get your verticals. We need a better fix. THIS IS A BUG!
Maybe you are looking for
-
Get rid of a option in Safari drop down menu?
Hello, When ever I right click on a link one of the option that shows up is "Download all with iGetter" The program is not on my computer anymore. So how can i fix it where it doesn't appear in that drop down menu? Here is the picture; http://kevinka
-
When you have several topics assigned to a see also button, the see also button displays several topics within the pop-up window in the compiled help. However, if you have only one see also topic assigned to the button, the button automatically displ
-
Download Creative Cloud Application ..?
Essalam Aliykom Smahtwa if possible question ? How serial number ..? Waiting for you
-
Getting A PAL error in DVD studio after compression
OK, so I have no idea what is going on here, as I have never ran into this problem. I have a client who brought in an older sony cybershot camera. Since the camera has no output, I pulled the memory stick, and brought the footage into my computer fro
-
When I try to run the installer it says "Sorry an error has occured. The application cannot be installed because the installer is mis-configured. Please contact the application author for assisstance."