SWF in iFrame - How to get mouse wheel to work

I have been searching for a solution to this for a few days
without any luck. I was hoping someone here may have come across
this problem and know of a solution, or know if it just is not
possible.
I have a static page which consists of an iframe, picture and
a div with some links. The image is an image map and set to load
all links within the iframe. The flash itself is a 360 degree
panoramic view with hotspots (links) within the file that also
point to other pages. My issue is that the mouse wheel scroll is
supposed to be a zoom in/out feature, which work with the flash
file and full screen view. However, when the file is loaded within
the iframe, the scroll wheel on the mouse will only scroll the page
and will not interact with the flash file at all.
The problem seems to be with the following browsers (PC):
Chrome 0.4
Opera 9.5
Firefox 3.0
The zoom works in IE6, although the page does scroll with it.
When I disabled the page from scrolling (see index2.html) the zoom
stops working. This is probably due to the code used to disable the
mouse. I really need to try to get the mouse wheel to zoom in
FireFox 3 though. The large majority of our visitors are PC users
with FireFox 3 or IE 7, so these are the two most important
browsers to have working.
The pages are still currently under development but examples
are online here:
http://www.utoledo.edu/campus/virtualtour/maincampus/index.html
-Normal page
http://www.utoledo.edu/campus/virtualtour/maincampus/index2.html
-Page with scrolling disabled
Does anyone have any ideas for a possible solution? Thanks
for taking the time to help.

As far as I know,there is no facility for detecting mouse scrolling wheel in JDK 1.3.
Check it in the later releases of JDK.

Similar Messages

How to get mouse wheel action in my swing application?

Hi
In my mouse, i am having mousewheel to support scrolling.With the help of the wheel, i can scroll the pages in IE browser or any other appliction.
In swing application ,i have scroll bar inside a JFrame.I want to have mousewheel action in my swing application to support scrolling.
any idea ???
Thanks

As far as I know,there is no facility for detecting mouse scrolling wheel in JDK 1.3.
Check it in the later releases of JDK.

How to get the webcam to work?

Hi,
As I don't have an instruction book for this computer, can anyone tell me how to get the webcam to work please?
There is supposed to be something that pops up from the side of the screen, but I've left the mouse sit there for ages on all sides and nothing. Please assist me.
Kit_e

I refer you back to my original question.
There used to be a bar at the side that popped up when you left the mouse sit there for a bit. It no longer pops up ... ie: it's disappeared and will not return ... this is what "started" the webcam for use as a webcam.
I have no idea on how to use the webcam from any other place. There is no icon. There is no mention of it in the programs list. There is nothing. There is a webcam sitting there in the laptops lid, but I can't find where to "access it". Like I said there is no icon, nothing in the programs list.
I want to be able to use it. You know, like you use a webcam. On the web, as a camera. No particular website or software that I have in mind.
Thanks.

Any suggestions for how to get my logic keyboard working properly for FCE?

Any suggestions how to get my logic keyboard working properly for FCE? I can't use some of the shortcuts - insert, overwrite etc. maybe the system settings aren't correct?

This normally happens when debris builds between the trackball and the rollers on the inside of the mouse.
Turn the mouse upside down and rub the trackball vigorously on a sheet of paper or microfiber cloth to try and free it up.
Regards,
Captfred

Update to kichat: FAQ 2 - How to get my router to work with iChat?

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

I have an airbook, 10.7.4 LION, thunderbolt ethernet adapter and when trying to install 1.2.1 thunderbolt upgrade it says "this software not supported on this system"? Any advice on how to get the adapter to work?

I have a new airbook, 10.7.4 LION, thunderbolt ethernet adapter and when trying to install 1.2.1 thunderbolt upgrade it says "this software not supported on this system"? Any advice on how to get the adapter to work?

Welcome to Apple Support Communities
If you purchased the computer before 2010, your computer hasn't got Thunderbolt, so you can't use it

How to get this script to work with different browser

Do you guys know how to get this script to work with mozilla firefox?
do shell script "open -a safari 'https://login.binck.nl/klanten/Login.aspx?ReturnUrl=%2fklanten%2fdefault.aspx'"
tell application "Safari"
activate
          tell document 1
                    repeat until ((do JavaScript "location.host") is "login.binck.nl")
                              delay 1
                    end repeat
do JavaScript"document.getElementById('ctl00_Content_Gebruikersnaam').value='sim';document.ge tElementById('ctl00_Content_Wachtwoord').value='password';window.open(document. g etElementById('ctl00_Content_LoginButton').href, '_self', 'true');"
          end tell
end tell
Thank you so much in advance:)

That isn't possible. Firefox's AppleScript dictionary doesn't contain anything which can be used to manage JavaScripts.
(63741)

Hi. I have Snap To Grid and By Kind enabled in Lion but it's not working. When I trash an icon, instead of snapping the remaining icons to the By Kind grid, a space is left where the trashed icon was. Any suggestions on how to get Snap To Grid working?

Hi. I have Snap To Grid and By Kind enabled in Lion but it's not working. When I trash an icon, instead of snapping the remaining icons to the By Kind grid, a space is left where the trashed icon was. Any suggestions on how to get Snap To Grid working?

Where are you talking about the Desktop?
I don't see where it is possible to set both Snap to Grid and By Kind they seem to be mutually exclusive.
And then
If I have Snap to grid set I get the behavior you describe. If I have By Kind set the icons stay together and close up the space from the deleted icon.
regards

How to get my Addon to work with the license key?

Hi,
Can someone tell me how to get the Addon to work with the license key?
I've follow the steps as stated in this thread:
[Re: SBO 2005 A - How do I get a Connection string from SAP B1.|Re: SBO 2005 A - How do I get a Connection string from SAP B1.]
1) i've registered a BASIS key and get a 'BASISXXXXXX" string
2) then i paste my BASIS key in "Solution" of Add-On Indentifier Generator and generate the Add-On Indentifier Code
3) then i paste the string to my source code
which is the "XXX" of the sample code in that thread.
static string AddonIdentifierString="XXX";
int lRetCode=0;
int errCode=0;
string errMsg= string.Empty;
string connectionStr ="";
link = new SAPbouiCOM.SboGuiApiClass();
connectionStr =Environment.GetCommandLineArgs().GetValue(1).ToString();
link.AddonIdentifier=AddonIdentifierString;
link.Connect(connectionStr);
oApp = link.GetApplication(-1);
vCompany = new SAPbobsCOM.CompanyClass();
string cookie = vCompany.GetContextCookie();
string conStr = oApp.Company.GetConnectionContext(cookie);
vCompany.SetSboLoginContext(conStr);
lRetCode = vCompany.Connect();
4) then i add my add-on using manager role at Add-on admin
5) then i can see my add-on there. it not suppose to be there since i've not installed any of my add-on license for my own add-on.
what steps did i miss? Can someone please advise? Thanks
ps : i'm coding in VB

Hi,
i think you have to change the license file attributing the number of licensing for your addon, then download it from https://websmp202.sap-ag.de/smb and then install it on SAP License manager, then I think you should give the license for your addon for individual users (example manager)
I hope it helps.
Best regards

How to get online apps to work with the Verizon DSL modem firewall set at "Medium" level, not "Low?"

How to get online apps to work with the Verizon DSL modem firewall set at “Medium” level? Xbox 360 Live, FTP, and the Windows sntp Time checker native to Windows XP WON’T WORK unless the Verizon firewall is first reset down to “Low.” Then all works well, but I then risk low firewall protection. Setup: · Westell 6100 DSL modem (Software Version: VER:4.04.03.00 Transceiver Revision: 7.2.3.0 Model Name: C90-610015-06), · D-Link DIR-655 wireless router (Hardware Version: A3, Firmware Version: 1.21), For Xbox 360 Live the “canned” port forwarding rule for provided in Verizon’s drop-down list for the Westell 6100 modem forwards ports 88 and 3074 for both TCP and UDP. This does not meet Microsoft’s forwarding recommendations for Xbox 360 Live stated at http://support.microsoft.com/kb/908874. Instead, for the Verizon modem (Westell) I made a new port forwarding rule to comply with those Microsoft instructions. It forwards ports 53, 80 and 3074 for TCP and ports 53, 88 and 3074 for UDP. These same ports are also forwarded in the D-Link router configuration. For FTP, port 21 is also forwarded for TCP and UDP in both modem and router. But they don’t work until I first cripple the Verizon firewall down to “Low.” How to get them to work with the Verizon firewall up to Medium?

While I do not know the answer to your question, BUT since you have this modem and another router - you could just follow.
http://www.dslreports.com/faq/13600
^^
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

How to use Mouse Wheel Events

Hello Everyone
I am using Datagrid in my Canvas.
I use mouse wheel to scroll the datagrid. But in one scroll
through that wheel make the more than 4 rows to be scroll.
So Now my requirement is to control the delta value of mouse
wheel event and how to use that with my datagrid so that i will
able to scroll one row through mouse wheel scroller.
Thanks

please give me some suggestion around it.
I want to scroll one row of datagrid with per mousewheel
scroll. I am not getting how to use the scrollMouseWheelMultiplier
property of the IConfiguration class because i am not able to
create the object of this class.
I am using the Flex 3.0 and flash 9 version.
please help me out around this.

How to fire mouse wheel events to parent container?

Hi,
When I create a JPanel (let's say jParent) inside a JScrollPane and this JPanel is larger than the current viewport I can use my mouse wheel to scroll the JPanel's containt without coding anything about that.
But if I add another JPanel-derived component (let's say jChild) to the first JPanel, mouse wheel events are not received by the first JPanel when the mouse is over the new added child JPanel.
How can I forward child's mouse wheel events to the first JPanel?
If I use:
jChild.addMouseWheelListener(jParent)I must implement a mouseWheelMoved() method in jParent that requires some code to work while it was doing it byitself before...
Thanks in advance for any help :-)
Regards,
Lara.

you have a mouseWheelListener added to jChild?
if so, in the mouseWheelMoved code include this line
jParent.dispatchEvent(mouseWheelEvent);//or to the scrollpane

How to remap mouse wheel in single application?

Hello,
I want to achieve simple thing - control audio in Smplayer using mouse wheel. The tricky part is that I need to control the master volume on my AV receiver because the audio in videos is played as bitstream (DTS/AC3 over SPDIF). I'm able to modify the mouse wheel actions in mplayer but unfortunatelly Smplayer doesn't allow such remapping: http://smplayer.sourceforge.net/forum/v … f=2&t=6077
I already use xbindkeys with xvkbd for application specific remapping of both keyboard and mouse. I can remap the wheel for Smplayer window but I'm unable to figure out how to make sure the wheel will work for other applications as well - I'm just unable to simulate mouse wheel action for applications other than Smplayer. (Or is there any other way how to not modify the button for other applications?)
If I try only simulating the wheel, it doesn't work...
# .xbindkeysrc
"xdotool click 4"
m:0x0 + b:4
# or
"xvkbd -text "\m4""
m:0x0 + b:4
However if I add "sleep 0.2" before xvkbd or xdotool, it works (but this is unacceptable delay for me). Also if I try to simulate wheel on keyboard press, it works even without the sleep.
Any help or suggestion?

not really.. sorry
Kunal Mittal

How to get Mouse Screen Coordinates

Hi
I have code:
JButton btn = new JButton("button");
btn.addActionListener(new ActionListener()
    public void actionPerformed(ActionEvent e)
          // HEAR I WANT TO GET MOUSE
          // SCREEN COORDS!!!
}I want to get Coordinates!!!

If you have a MouseEvent you can convert it as follows:
Point point = mouseEvent.getPoint();
SwingUtilities.convertPointToScreen((Component)mouseEvent.getSource(), point);However, that won't work from your actionPerformed method. If possible, use a MouseListener and intercept the mousePressed/mouseClicked events.
If you want to capture the mouse position when someone presses a button (e.g, by using an keyboard shortcut) then you'll need a MouseMotionListener to track the mouse pointer as it moves over your component.
Hope this helps.

How I detect mouse wheel movement?

I never use this for now, and I want to intercept mouse wheel movement (up or down) for to change animation panels (divs) or to make another actions.
Is not for a scroll of a large stage or div, it's only for to know when the user use the mouse wheel.
Example: http://www.protest.eu/nl/dames/
Thank you.

Are you looking for this ? it may be done easily with Edge Commons
http://www.edgedocks.com/content/2013/12/using-parallax-scrolling-animate-single-line-code

SWF in iFrame - How to get mouse wheel to work

Similar Messages

Maybe you are looking for