SWF in SWF sound problem

Hi, I made a preloader, witch is a SWF file with a progress
bar and a container, in this container will be loaded the page SWF
witch is a flash presentation, my problem is that the page SWF has
sounds for buttons over state, and if I run the SWF it works, but
if it's loaded by the preloader I have no sound anymore. Any
suggestions anyone ?

Man, you`re fast!
And all over the place, it seems... For years now, whenever I look for solutions to my Flash problems, at least some of the answers are from you!
Just wanted to say thanks and that I eventually found this same answer from you on another post here on the forums, and it solved my problem.
So, thanks Kglad!

Similar Messages

OSMF Flex 4 VideoPlayer sound problem

Hi,
It seems that there is a problem with sound in the Spark VideoPlayer in video that's been encoded in H.264.
If I set 'autoPlay' to 'true' or start playing from the very beginning of the clip, everything works fine.
But if I set 'autoPlay' to 'false' and start the video not from the beginning, i.e. click somewhere in the seekBar, video is playing, but there is no sound. Once I jump back to the very beginning of the clip the sound appears, and from that point I can play the clip from any section and sound is there.
Once I reload the video, the story is repeated.
This happens ONLY with H.264 files and does NOT happen with flv files.
Also, I don't believe that this problem existed back in the beta version of Flex 4 (previous version of FlashPlayer 10.x.xx.xx), even after the VideoPlayer became OSMF based.
FTQuest

Good evening Brian,
After installing the latest Flash Player from the Adobe labs and switching to the latest nightly build of Flex SDK the sound problem is gone.
But I've run into another one: I make a simple OSMF player in Flash CS5 and it works fine within the Flash and also when I open the resulting SWF in stand alone Flash Player.
Yet, when I try to open the swf from within the Flex 4 application, using mx:SWFLoader I get the following error: VerifyError: Error #1053: Illegal override of synthesizer in org.osmf.layout.LayoutMetadata.
Any advice on that?
Thanks,
FTQuest
P.S. Also, for some reasons setting the 'autoPlay' on MediaPlayer to 'false' doesn't prevent the video from instant playing.

Sound problems after upgrading to 7.1 and Pro

I have recently upgraded to Quicktime Pro and installed the 7.1 update, to create Podcasts at work. The only problem is now that non of my quicktimes will play sound. I have checked all volume control sections and mutes etc, its definitely a problem with the software. Also once a movie plays through, or if I try and use the play controls, other than initially pressing play, the player crashes and have to go to task manager to close it properly. The same occurs when you try and close the program.
I was going to uninstall and try again, but I was worried this might cause problems with the Quicktime Pro info.
Anyone else had these problems or have any advice.
pc amd 2.8 Windows 2000

I'm also having sound problems with Quicktime v7.1 Pro. If I play a .swf file in Quicktime, the video and audio play great. If I play an .avi file, the video plays but there is no sound. If I play a .mov created by Camtasia Studio using either the default compression or the H.264 compression format, the video plays but there is no sound. The graphic display indicates that the audio is present in all cases.
Is there an issue with this new version of Quicktime Pro v7.1?

Flash CS3/CS4 Sound Problem

Hi,
I am trying to create a soundboard and I have all my buttons and stuff, the only thing left is to put the sound files in. However, I have tried adding them to the library and dragging and dropping them over the HIT option like I usually do, but when I export the swf file, the sound file sounds terrible, it crackles and sometimes stutters a bit. I have tried setting these sound files to mp3 and raw in adobe options but with no luck. I am using actionscript 2.0 if that has anything to do with it. Also, I need these files embedded, not just linked. Please let me know any suggestions you might have.
Thanks.

In the Export Settings dialog, go to the Flash tab and look at the Images and Sounds section. Check the Audio Stream and Audio Event settings. It's a common occurrence for the sound to be set to a low data rate and monophonic. If so, click both of the Set buttons and adjust the compression, bit rate and quality settings.

I have sound problem in My Cq40-144TU Laptop

Hi,
I have Cq40-144tu laptop. i am't hearing sound from internal speaker but sound is hearing from headphone. I have configured my system many time. Last got to shop and they also format it and reconfigured but still this problem is showing.
But I was hearing sound from speaker when i chat in gtalk and then i heared sound from window media player and other application also for 5 to 10 second only. every time some text is recieved i hear sound for 5 to 10 second.
please tell me what is problem in My Laptop. i have window 7 ultimate operating system.
Please help me sir

What sound problem - no sound on anything, no sound on some apps ?
Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
And for future info typing in all capitals is considered to be SHOUTING

Desperately need some help!! iTunes/Quicktime/iChat/Sound problems....

So, yesterday, I was online, on google video, and when I pressed play on the video, there was no sound, but the video worked...the same was true on every video site i checked. My computer volume was at max, and I even tested the speakers to make sure they were on, and they indeed were.
I thought that was odd...but then the problems really started.....
After that, I clicked on my iChat icon. It bounced once, and did not open. The same thing happened when I clicked on iTunes. 1 bounce, and then nothing. I checked to make sure all of my iTunes mp3 files were on my computer....they indeed are all still here, bit nothing I can do opens iTunes. I've run disc utilities, and disc repair...according to that, everything is peachy-keen on my computer.....but iChat and iTunes STILL will not open, and there is still no sound on anything.
Now, i'm leaning towards the archive and install option....or even just backing up what I want to save, wiping the drive, and starting from scratch.....but i'd really like to not have that happen.
(and, as a side question, if all I want to save are images, several documents, and many mp3 files, would everything be okay if I just backed them up on an external drive, and then loaded them back on to my computer after reinstalling OS X?)
Sorry about the length of this, but I am at my wit's end, and I have no idea what to do.

by third-party, do you mean things I installed that are not manufactured by mac? If that is the case, I have microsoft office, Smart Music, Flip4mac, and Senuti.
I got rid of Flip4Mac to see if that affected my sound problems, but it did not. So, as of now, my problem remains the same...

HT3983 i have a sound problem when i install windows 7 32 bit on my imac

i have a sound problem when i install windows 7 32 bit on my imac

Did you download and install the Windows Support software? First step in Bootcamp Assistant is to download the support software. Then did you install the support software from within Windows?
Read the Bootcamp Install instructions. http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

Sound problems on ProBook 6550b, running on Win 7 Pro x32bit..

I have been getting very similar sound problems on my notebook as posted by most: internal speakers work on original Audio HD drivers, but there is no sound when I connect external speakers or headphones. I up-graded the audio drivers to IDT HD Audio and I get sound coming from external speakers or headphones, but nothing from internal speakers.
I have tried everything from reporting the problem on public forums, live help, and done this or that, but nothing changes. It's so very clear to me that it has to do with audio drivers, which don't seem to work appropriately to cover all aspects of sound output.
I also, often, get this loud, weird, irritating noise and a frozen PC when I am playing music with the notebook, while on the internet. The best I do is not to do both at the same time. I have seen similar problems on blogs, but tangible solutions are NOT offered!!!! Please help...

Audio Switching coudl be due to several reason. if you have tried latest audio drivers and latest Video drivers from hp.com, i suggest you to get audio board replaced for your computer.
Hope it helps.
Regards,
Waseem,
I work for HP.
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Regards,
WW
“I am an HP Employee“
***** Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can you please help me?

When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can anyone please help me?
Sincerely,
Eric

Run this when you have the problem and post the results here.
EtreCheck
This will tell us what is loaded

Any resolution to the sound problem?

I have been having the same sound problem with my Mid 2010 Mac Pro tower ever since I got it. I have been in touch with Apple and have been told that they are familiar with the problem, but that they are still working on a fix. The problem is that I have external speakers, and every time I shut down and then start up again, I have to go to preferences and physically change the sound output to go to the speakers. I have also been tole that the Mac is supposed to sense the external speakers and go directly to them.
Is there anybody else out there with this problem, and has been able to resolve it?
Thank you.

I have a 2010 Mac Pro and use the stereo line out jack in the back of my machine for my speakers with no problem. I don't recall any problems setting it up. But check the Audio MIDI Setup (in your utilities folder) to see if you can set it from there (should be able to). Not sure why the preference wouldn't stick. And I don't believe there is automatic detection of an attached sound output device where the sound preference switches to that (unless maybe the front jack which I never use).

Please help iPhone 5 sound problems

iPhone 5 sound problem: my iPhone 5 noise is only coming out thru the ear speaker and will not come out of any of the other speakers on my phone i say again it will ONLY come out my ear speaker it does it in games and in videos in music in everything! Ive reset the phone and went thru all the settings and everything to try to fix with no luck at all please help me!

fdisk formated and reinstaled windows 3 times. fresh install each time i installed a sound card. so I dont think lingering drivers is the problem which also means dx9 has been installed fresh each time.also I have been dealing with this for nearly a month and I am at a loss.

Sound Problems on iPad: how to fix, easy [video]

Hi dear iPad user,
Most people will, eventually, have sound problems: the cause can be complex as a 'miss-behaved' app that messes the sound engine or as simple as the iPad being forgotten on Mute/Volume Down.
I used to help family and friends to fix their iPads' sound problems by sending them 'text' instruction steps... lots of times they ended up calling me on the phone...
So I made a video (short: 1m40s):
https://www.youtube.com/watch?v=FjBP-Ncj_fE
It shows:
how to unmute the sound (even if the side-switch locks the rotation of the screen)
how to put volume up
how to close all the apps (in the case there is an App messing with the sound system)
how to reboot the iPad (ultimatelly fixes hard cases of messed sound system)
What it won't fix: if you have a hardware problem...
If you do all the steps and you get NO SOUND AT ALL, please, try also checking if you car listen sounds using a HEADPHONE (you know are working conditions). If you can listen to sounds in the headphone but no sound at all in the iPad's built in speaker, well, there might be a hardware problem and you should look for help on an Apple Retail Store or other official technical support available at your location.
Hope this helps!
Everson.

UPDATE: fixing iPad Sound after iOS 7
http://youtu.be/SDf1LDcE95Q
(1min 36sec)
It covers the basics:
checking side-switch / mute / "Control Center"
volume all up
...and also the worst cases:
closing all apps (for rare cases when a single app might render the sound system instable)
rebooting the iPad
So, don't get desparete: try the things in the video.
There are people who reported having forgotten an audio-bluetooth connection activated with a turned-off sound-system or speakers... or forgot Air-Play turned on... so be sure you disengage bluetooth and/or airplay.
On the 'hardware side', dirty dock connector (30 pin) can make the iPad 'think' it is connected to external audio - if so, cleaning it with a dry toothbrush can fix. Also, moisture in the headphones connector can make the iPad switch to 'headphones' even without headphones connected, making it silent: check if you can hear things with headphones plugged in - if so, try gently inserting and removing headphones a few times and check if you get sound back to iPad's speakers alone.
Good luck to everybody! Audio problems are quite common - fontunately they are easy to fix.

Please Help - sound problem

After reformatting my laptop and re installing xp pro everything works but my sound,,, before anyone suggesting I should renew my sound drivers or even update my BIOS let me mention that I have already taken those stept, the Mic works but I have no sound coming out of the laptop.....
Any Ideas????
[Edited by: admin on 02-Apr-05 15:40]

Hi Nick,
Sorry for the long delay I only just noticed your post. Easily done if you post in the middle of another thread.
To diagnose your sound problem the best approach is to systematically check (and isolate) each possible problem area until the culprit is found. For sound problems follow the sequence :-
1. Check Hardware. If you have a manual control check that it is turned fully on (this may be a wheel or knob somewhere on your notebook). There is no point carrying on if this is turned down/off.
2. Check Software. This is where the fun begins.
2.1 Check the sound properties (available from Control Panel) and make sure that the MUTE box is not ticked.
2.2 Check the individual volume levels shown on the sound properties box. Set them all to maximum.
2.3 Select Device Manager (from Control Panel) and check the entry for Sound/audio devices. Select your sound device and click the 'troubleshooting' option. Follow the on-screen checks.
2.4 If you still have no sound deinstall the sound device (from ADD/REMOVE hardware) and reboot. The system should detect the sound device and re-install it)
2.5 Finally download and reinstall the correct device drivers for your sound devive from the Toshiba web-site.
2.6 If you still have no sound after all of the above then I would recommend a complete re-install of your system from the Toshiba Recovery CDs. and if that does not correct the problem then you will need to take it to a Service Agent for them to sort it out.
HTH

USB Sound Problem

I'm having a problem with my Bose USB sound system that has just recently developed. The system is plugged directly into the back of my Mac Pro desktop so it's not going through any hubs or secondary systems. When I first start my computer the sound works just fine. But after about 10 to 15 minutes of use the sound stops completely - as if the sounds have been turned off. If I boot into Windows 7 using Boot Camp, the sound system there works just fine with no problems at all, so I do not believe this issue is hardware related but is something associated with OS X.
This all started recently after installing Tinker Tool and then realizing that their latest version is not compatible with Snow Leopard. I followed their directions and told Tinker Tool to restore the previous settings and then I removed it from my system. Now, I'm having this USB sound problem. I think it's highly probable to be the cause of my problem.
Is there anyway to reinstall the USB drivers in OS X without reinstalling the entire OS? Or, is there something else I can try to restore the USB function to Snow Leopard? Many thanks for any tips or suggestions.

They are plug and play.
I did try unplugging all of the USB devices and then powered off the computer and unplugged it for about 5 minutes as I heard that that sometimes solves USB problems. However, upon reconnecting the problem returned. All other USB devices seem to be working normally - it's only the Bose sound system. I tried plugging it into a different USB port in the back of the computer but the problem continued after about 10 minutes. Therefore, I am convinced this is not hardware related.
At this point I am thinking I need to reinstall OS X Snow Leopard to undo whatever Tinker Tool damaged. Is it possible to just replace the USB drivers in OS X without reinstalling everything?

A30 sound problem

have tried all drivers from toshiba web sites, uk, canada, europe etc but cannot get sound to work on my satellite a30, model no PSA33E 7C3F3 EN, fresh install of xp had 4 drivers missing, ati video, smbus, modem and sound, only drivers from canada site worked for video smbus and modem, xp states sound working properly but no sound from speakers or headphone socket and have checked all volume levels (on full nothing muted), any ideas ???

Hi,
Just to inform you that my problem was solved by itself :)
I've reformatted my laptop and installed the original XP Pro SP2 again by following the instructions.
Sound problem was solved automatically, no chipset utility installation required..
The sound problem was probably caused due to missing Microsoft KB835221 update for SP1, and KB888111 for SP2, which then was solved with the original latest XP..
Rgrds..

Pismo Sound Problems after Sleep in Tiger

Hi all. New to the forums and returning to Macs after years of cursing Bill Gates. Picked up a Powerbook Pismo from a friend and have been having some fun with it, but I have one problem I can't solve. I replaced the hard drive (saved the old one) and installed Tiger and 1GB of memory on the machine. All seemed well until I noticed that the sound would not work sometimes after sleeping. The sound will usually return with a reboot, but sometimes I'll have to actually turn the machine off, and clear the PRAM to get the sound to come back. Sometimes, the volume and screen controls will both not work at all (pop up doesn't even appear when the keys are pressed), sometimes it's just that the sound doesn't work, but everything looks right on the screen. I've also had the sound and screen buttons not work only to have pop ups suddenly appear and the adjustments happen several minutes after I pressed the keys. So far I've tried:
Clearing the PRAM
Checked the Pram Battery (ok)
Reinstalled Tiger (Still loses sound)
Downgraded to 10.3 (problem persists, and seems worse)
In system information on Tiger it says "there was an error when retrieving that information" when you click on the sound hardware.
The machine is a 500mhz Pismo with a 48gig drive and 1 gig of Memory (133mhz, would that cause this sort of problem?)
I have not tried going back to OS9 to see if the disappearing sound resolves as I don't currently have an OS9 disk.
This sure seems like a software problem, but I'm starting to wonder. I really like this machine and want to get it to work! Help!

Maxstang, welcome to Apple Discussions.
Did you repair permissions after you installed Tiger? Have you updated Tiger to 10.4.11?
Here's the Sound troubleshooting info in the Pismo Service Manual.
No sound from speaker(s)
1. Verify mute mode is not enabled (F6 on the keyboard).
2. Check the volume setting in the Sound control panel.
3. Verify no external speakers or headphones are plugged in.
4. Reset PRAM.
5. Make sure speaker cable is plugged into sound card.
6. Replace sound card.
7. Replace speakers (part of the top case).
8. Replace I/O logic board
Startup sound is heard, then no sound from speaker(s)
1. Remove sound preferences from System Folder, reset PRAM,
then restart.
2. Perform clean installation of system software.
Had the Pismo previously had OS X installed. There's a firmware update (Boot ROM version 4.1.8) that should be installed prior to installing OS X. However, when I got my Pismo with Tiger installed, the firmware was not updated (have since updated). However, I don't think this could be the cause of your problem, since I had no sound problems when the update was not installed.
The PC133 RAM (which runs at 100MHz) should not be the problem. I have PC133 RAM in my Pismo.
Since you replaced the HD, could you have disturbed the connection to the Sound Card. The Sound Card is located to the upper-right of the HD. Here's a helpful laptop site.
Fix It Guides for Mac Laptops & Mini
http://www.ifixit.com/Guide/
The guides can be viewed on-line or you can download a PDF file.
 Cheers, Tom
(='.'=)
(")_(")

SWF in SWF sound problem

Similar Messages

Maybe you are looking for