Swf movies playing back 1/2 the original speed

I have a multimedia cd exported as an .swf. Inside of this I
have a 'movie viewer' that loads external .swf movies into the
project via 'tell target' command. I have roughly 20 movies that
work fine, but for some reason the new ones I made are running at
2X the speed inside the player. However, they run perfectly on
their own though.
The main swf is at 23 fps. I have adjusted the external
movies to 1, 6, 12, 23, 30 fps and get the same 2X speed every
time.
Has anybody ever heard of this happening before? Are there
any solutions to this?

Thank you for replying and sorry it took so long to respond. Now I can't get into my Verizon email so I didn't know I had a response on this site. I was also physically unable to sit at my computer. Here is the info you requested:
Transceiver Revision: 7.2.3.0 Vendor ID Code: 4 Line Mode: G.DMT Mode Data Path: Interleaved Transceiver Information Downstream Path Upstream PathDSL Speed (Kbits/Sec) 864 160 Margin (dB) 20.5 31.0 Line Attenuation (dB) 44.5 29.0 Transmit Power (dBm) 3.3 11.1
on 8/15 I had the slowest download speed yet of 0.17 mbps! I am paying for 1.1-3mbps. My modem is 6 or 7 years old. I'm not sure if I mentioned the last 2 sentences before.

Similar Messages

Is there a way to move files from one folder to another without copying and pasting and then going back to delete the original?

Is there a way to move files from one folder to another without copying and pasting and then going back to delete the original? The cut and paste function is not available and there's no "move to" function. Am I missing something? It was so easy with Windows.

Drag the files, or press Option when pasting them; this accesses the Move To function.
(124070)

I have movies in my movie library but i cannot play them or drag them into my ipod.There is an exclamation point next to each of them.Then when i click on it to play it it says the movie cannot be used because the original file could not be found.

I have movies in my i tunes library but i canot play them or drag them into my i pod.There is an exclamation point each of them.Then when i click on them to play them on my pc it says this movie cannot be used because the original file could not be found.Help?

Read threads list over on the right under the heading of More Like This
Allan

How to move back microsoft in the original folder

How to move back microsoft in the original folder?

Microsoft Office? The applications themselves go into Applications>Microsoft Office 2011.
Why did you move them? You may need to install anew if you've moved the applications in the suite.
Clinton

TS1389 When I go to play a movie, I get prompted that the original file cannot be found. When I do a search on spotlight it cannot be found, but it does appear in my purchases. How do I re-download when it does not appear that it is allowed?

When I go to play a movie, I get prompted that the original file cannot be found. When I do a search on spotlight it cannot be found, but it does appear in my purchases. How do I re-download when it does not appear that it is allowed?

Hello paddyrb154,
Thank you for the details of the issue you are experiencing with your purchased movie in iTunes on your iMac. It sounds like iTunes thinks the movie is on your computer, but it is not located in the iTunes Media folder.
For an issue like this, I recommend deleting the movie from iTunes and downloading it from the iTunes Store again. Use these steps to delete the movie:
Mac or PC
Launch iTunes.
From the Library pop-up menu, choose Movies.
Click Movies in the navigation bar.
Click the movie you want to delete.
Press the Delete key on your keyboard.
In iTunes 11, the movie cover art will remain visible, but a cloud icon will appear on it to allow you to download the item again (in countries that support this).
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Once you have deleted the movie, you can click on the cloud icon to download the movie again. If you do not see the cloud icon, use the steps in the section titled “Download previous purchases on Mac or PC ” in the following article to download the movie from your list of past purchases in the iTunes Store:
Download past purchases
http://support.apple.com/kb/ht2519
Thank you for using Apple Support Communities.
Best,
Sheila M.

How to move back microsoft to the original folder

how to move back microsoft to the original folder

Drag the applications and files back into the MicroSoft Office folder.

A duplicate DVD made on my iMac will not play on it although the original DVD will play on it and on my TV. Answers?

I made a duplicate of a DVD on my iMac but it will not play on it. The original DVD plays on my iMac. The duplicate will play on my DVD player with my TV. The original DVD is not a copyrighted commercial DVD.

That doesn't create a DVD. It makes a copy of the files on the DVD. All you did was put data files on the disk. A disk must be formatted correctly for a DVD player to recognize it as a DVD.
Use Disk Utility to make an image of the DVD, then burn the image to Disk.
File menu, New>Disk Image from <DVD name>
Set the image format to DVD/CD Master.
Once the image is finished, select it in the Disk Utility Sidebar and click the Burn button.

HT2375 Hi I can't play back track from the middle of a software track

Hi I can't play back track from the middle of a software track, and hear what I have played.

MarsDaretoDream wrote:
Hi I can't play back track from the middle of a software track, and hear what I have played.
For this you need to look at chase functions. Project settings>Midi>Chase button

I copied a video from iphone to PC, it shows "0 kb" in PC and can't play. I deleted the original one in iphone, and no record in itunes as well. Any way to recover it from PC with the one shows "0 kb" now? Any software or program? thx!

Hi all,
I copied a video from my iphone 4s to PC, it shows "0 kb" in PC and can't play. I deleted the original one in iphone by accident, and no record in itunes as well. Is there any way to recover it from PC now with the one shows "0 kb"? Any software or program? Or expert of PC knowing how to do it? thx!

You are out of luck on your PC, since the file appears to be empty, but you can try to recover the deleted video on your phone: http://www.wondershare.com/disk-utility/recover-deleted-photos-from-iphone.html

My video that was taken with a digital camera and imported into iPhoto plays back at a very fast speed. Any ideas why?

My video that was taken with a digital camera and imported into iPhoto plays back at a very fast speed. Any ideas why?

Is it a slow motion video? iPhoto does not understand the slow motion tags created by some cameras, eg.g. the iPhone back camera.

HT1657 I rented a movie and now I cannot figure out how to watch it on Apple TV. We did the update yesterday. I used to go under the "Movies" tab and click Play. It has the original options now and when I click "Rent" it says already rented, not downlo

I rented a movie from ITunes yesterday and now I cannot figure out how to watch it on Apple TV. I have done this before, and to watch it later on, I would go back under the "Movies" option, find the movie, and there would be a Play option available. We did the update to Apple TV yesterday. Now when I go back to the movie, I see the original options. Preview, Rent, Buy, etc. When I click on Rent again, it says the movie has already been rented but not downloaded. It instructs me to go under Settings/Downloads/Check Downloads, but there is nothing under Settings about Downloads. I found an option to Check for Rentals, but when I click on that option, it just keeps searching, with no results. Any ideas? This worked before the update, even though it took forever to download a movie....

I had the same issue with my apple tv 3rd generation. I rented Sinister and selected the "rent and watch now" option. Half way through the movie I accidentally pressed the menu button. When I looked for the rented movie on my apple tv I could not find it. Not even above the movie pannel where "purchased" and "top movies" comes up on the main menu. the apple tv suggests to go to settings>downloads but I don't have that option. I did go to settings> itunes store> check rentals but that didnt work either. It took too long to even check. Thank you because this SOLUTION worked great.
SOLUTION: How to reset apple tv 3 3rd generation to view rented movies:on the apple tv remote: press and hold "menu" to go to the main menu. Select SETTINGS> GENERAL >RESET >RESET ALL SETTINGS. After the apple tv resets, input all your information again and your rented movies should be visible when you cruise above the "movies" section. THANK YOU!!
Apple needs to solve this issue because honestly it took me 3 hours and a half to watch a movie that only lasted 2 BECAUSE I wast trying to solve the issue, reseting and all. blahh.

Audio out of sync. once it's uploaded to vimeo and played back looks like the old godzilla movies. PP Pro CC 2014. frame rate is correct.

Has anybody experienced major lag time on the audio once uploaded to Vimeo? Vimeo is pointing to the export. The delay clearly gets worse once it is played back from Vimeo. I am at the point of splitting video and audio on the timeline and moving the audio forward a bit at a time to see if that will solve. Feels stupid to be doing this after all the work that goes into a 45 min Doc

First of all, when you export, you should see the dialog box that has information about the source video as well as the export. If you are shooting 25fps then you are not in the USA. If you are in the USA, look harder at your export settings.
But that isn't the problem you are facing.
Are you using the Vimeo app to play the videos on the iPad or are you just playing it in a browser? Use the app if you aren't now doing so.
I doubt that you are using anything other than AAC for your audio from what you have said about using the presets, but I have to ask. You are using AAC, right? That is what Vimeo prefers.
Have you tried turning the HD off in Vimeo to see if that clears up the problem? That will probably be fine on a smartphone. An iPad might see the difference though.
You are not going to be happy reading this Vimeo.com thread, but here it is anyway.
I don't even know what to make of this one.
In any case, you will read for yourself that you may want to change browsers on the mobile device.

Inserted swf animation plays slowly 50% of the time.

Hi, I am currentlyhaving a problem where i am trying to add a swf file animation to a captivate 6 project.
the swf is made in flash 4 and is at most 2mb big.
there is lots of moving things in the swf file.
Basically, when i add the swf to any project (heavily tested) or even a blank project:
the cpu jumps to 45%ish
the animation plays slowly at points or constantly, if i move forward a page, then move back it pretty much always is smooth like it should be but if i go to next page then back again, this time it could be slow. there seems to be no tangible pattern to whether or not the animation will run choppy or smooth.
My animation originally was in layers, i systematically broke it all down so that everything moving is on the first layer now.
There's a lot of masks in my animation.
Both captivate and flash are/were set to 30 fps.
I have been trying to fix this for weeks now but to no avail, i have exhausted every bit of advice i can find.
Remember, the problem still persists even on a blank project.
If anyone can help me, that would be greatly apppreciated. I will be around for the next hour then on again tomorow (and the day after, and the day after)
thanks

ok, i got into contact with adobe. Afer about 30 mins it seems the problem is only when i preview, when i actually publish the project, it is fine.
So for other people experiencing this problem, publish your project (even publish a dummy copy) and test that if your previews are playing back slowly and unpredictably. I get the feeling this is a problem thats been happening with a lot of people because nobody wants to publish something that doesnt seem to be working.

QT movie play back error

I have Photo to Movie software app' and made a movie of my recent slideshow project. On play back there were 3 areas in the 30 min slideshow where the screen went black for a second or more. I checked back on the original SS at these points but everything was fine. I have completed 2 SS before with no problems right through to DVD for TV viewing. I am puzzled why this should have happened. Any advice would be appreciated as I am not sure what steps to take now other than redo the whole process ( it took a while ) and see if it happens again.

No, there isn't a manual as such, only FAQ. The 'Help' does not respond when I type in Keep motion in Photo, and the helpline has not responded either. I will have to experiment and find out by trial and error which is usually the case these days. Shame because it is a great software package for the money. Results have been excellent when viewing on TV. However I am moaning but I found this product far superior to the iPhoto slideshow, it gave me so much grief trying to be creative with audio and text is not available. Also burning to IDVD was a nightmare I had lots of correspondence on this site with others with the same problems unresolved. Now I am happy with P2M and would recommend it to all iPhoto slideshow sufferers, at £35ish it's a snip! Thanks for your time and interest.

I recently restored my laptop and also iTunes from an external hard drive, but when I play songs, it says the original file could not be found. How do I locate and fix this?

I recently restored my laptop with Windows 7 and imported my iTunes library from my external hard drive. When I try to play songs, it says it cannot and that the original file could not be located. How do I fix this?

Put the files back where iTunes expects them to be.

Swf movies playing back 1/2 the original speed

Similar Messages

Maybe you are looking for