.swf or .fla to .mov with audio converter?
Hey all,
I am looking for a way to get a .swf or .fla to a .mov file. I have compressor and quicktime pro with the macromedia suite. I can drop the .swf file in to compressor but i lose the audio. I also lose the audio when i export form flash to quicktime.
Any ideas ?
Hello, and thank you.
I did resolve the issue by exporting to .mov through Premiere and then buying Quicktime Pro and Exporting again from QT - I lost extremely little quality, but it seems that QT was able to discard any "extraneous" info (I'd be curious to find out what just what that info is).
I should mention that I wasn't very clear in my last - my first approach WAS to export from Flash... I tried it with all sorts of compression settings and all sorts of frame sizes, but the best I could ever get was an image of very poor quality with all sorts of artifacts. Because of that, I will most likely contact Adobe directly to make them aware that in my case at least the export to .mov option proved to be useless at best and a terrible time-waster at worst (sad but true).
There is audio in the file, and unfortunately Premiere does not seem to import it with the .swf file (unless there is some option I missed). On that count, I didn't have a problem - I just needed to re-insert the same audio file into Premiere as a part of my movie before sending it out again.
Anyway, thanks again. Most helpful!
-ian
Similar Messages
-
Compressing Movies with Audio?
Does anyone have any ideas on tools or techniques for
compressing Captivate files with audio? I'm sure this is a fairly
simple (and common) issue, probably with a simple (?) solution. But
there has to be a way to reduce/compress the file size, which
increases exponentially even when just a bit of voiceover is added
to a slide.
I've already broken the movie up into several smaller movies
and tried tricks like that, but I'm at a real loss. Any suggestions
would be very welcome! Thanks!One option might be to set you audio settings to a lower
quality within Captivate itself.
Another option that might work is to convert your .swf to a
movie format - .wmv, .mpg, .mov. There are several software apps
out there to do this. During the conversion - you can specifically
set the audio properties (quality) you want. -
Exporting Quicktime .mov with audio
I searched for a solution to my problem for a while and haven't found any so I felt I'd finally ask.
I am exporting a movie in Premiere Pro 2.0 as a .mov. Yet everytime I export the audio quality is awful. The audio plays fine within premiere, and the video exports perfectly. I've tried uncompressed audio, and the result is a loud static sound. I've tried multiple compressors (oblivious to which I should be using) none of which offered good results (sometimes it was even silent). What settings should I be using? (By the way, the audio in the scene is .mp3 and .wav, but I felt using the uncompressed setting would be find since I wouldn't be recompressing the audio)
I'm sure this is a very basic issue that has been addressed multiple times, but I couldn't find a thread or resource on the internet that helped with this issue I'm having. Thank you for any help you can offer, I appreciate it.I use the same settings, as you, with one exception - instead of 8-bit, choose 16-bit for the Sample Depth.
I also dislike using MP3 as a source. With the exception of tiny SFX files, I always convert these to PCM/WAV (Uncompressed) 48KHz 16-bit, before Import. That does NOT restore all the data lost with the MP3 compression (I hate the sound with MP3, but that's a different topic), but it gives me the best source to edit. I use Adobe Audition, but the free Audacity does a great job of this.
Hope that the 16-bit does the trick for you.
Good luck,
Hunt
BTW - what are you using to play the resulting MOV? -
Importing Video with audio- Converting MPEG comes out pixelated
I've got two problems.
I know I need to convert my MPEG movie to another format, and I cannot remember which, in order for FCE to capture the audio that comes with it. Right?
Do you know which format and specifications I need?
Also-
I've been using an MPEG Streamclip program to convert, but whatever I try (I havent gotten to importing it to FCE, so I dont even know if the audio will come in there or not) the video comes out extremely pixelated. I know it can be remedied, because the original is in much better quality. Ive tried MPG4 an Quicktime movies, but nothing is working. Is it the frame rate? Anything else? I am drawing a blank.
ANY help is GREATLY appreciated.
Thanks!From Streamclip export to QuickTime. Set the codec to DV NTSC and the frame rate to 29.97.
-
Need help with iMovie.
Have presentation for my Dad's funeral. Presentation is a little over 1 hour long and was working fine until traveling to funeral. Now several songs do not play. Some songs are fine.
I have tried restarting iMovie, restarting my computer. I have deleted the songs and replaced them with the song from iTunes. I made sure all song volumes are a 100% and my computer volume is normal. I normalized all audio files. Nothing seems to work.
Funeral is in about 3 hours. Desperate for help... any suggestions.Hi
One of teh final steps in the Export to Movie process is a dialog box where one can select which of the audio tracks embedded within the movie are included.
You must actively de-select those tracks that you do NOT want to include in the Export.
CCT -
Exporting Keynote to Quicktime movie with audio
I am struggling to get this to work although I have done so previously. I have a fully functioning keynote with an embedded quicktime movie and an audio file. The Keynote works fine.
When I try to export it I just get the audio file!! I am opting for 'manual' even thought the Keynote is a looped production without the need for any manual input.
Any ideas? thanksExporting to Quicktime with sound seems to have been restored ok in Keynote 09 as I have just tested it on the trial download copy. Up until then I have been importing into Garage Band without sound and adding it there which is successful but I think the quality of picture is better with only one step i.e within Keynote itself.
-
Hi all,
I have SWF file which contains audio as well as ActionScript2.0. When i am trying to insert it in Adobe's Captivate 5 by using Insert>Animation then after publishing it in HTML and run this HTML, some overlapping audio comes.
Please help me ASAP.
ThanksHi,
I am not able to publish the file as AS3 before inserting as an animatiion.
Anyone else who is having any idea??? -
How can I export a movie with audio that I have edited in logic 9 to a quicktime movie
I imported a quicktime movie into logic and added audio and effects but when i export it the original audio from the quicktime movie is still there even though it doesn't sound in logic!
Hi
One of teh final steps in the Export to Movie process is a dialog box where one can select which of the audio tracks embedded within the movie are included.
You must actively de-select those tracks that you do NOT want to include in the Export.
CCT -
Upgrading DigiStills camera so movies can be imported to imovie with audio
Hi
I currently have a Sony Digi stills camera that shoots little movies in mpeg 1 muxed format that are great BUT imovie won't allow me to import the audio into imovie HD (wrong format!)
Can anyone recomend or tell me where to find a list of digi stills cameras that WILL allow me to shoot short film clips and import the results into imovie with audio intact.
Or failing that let me know what formats are supported so i can check before buying another stills camera
many thanks
SSHI have a Sony Cybershot that also takes movies like yours. They will import into iPhoto as little Quick Time movies with audio intact. I just open them in iPhoto, press the "record" button on my iMovie audio microphone, then start the Quick Time movie. I have to cut and line up the audio to match the video in iMovie, but it's the best solution I can come up with thus far. Anyone come up with anything easier?
Powerbook G4 Mac OS X (10.4.3) -
Movie Clips Actions Get Out Of Synch With Audio
My movie is five about minutes long with audio and an offscreen timeline move clip containing action script to control other movie clips or play the root directory. After about a minute or so, movie clips get out-of-synch with the audio, apparently its getting bogged down.
My swf file doesn't seem that big, about 2.2MB and my move clips aren't that complex, although up to three levels deep.
My version is Flash 8 Professional and my laptop was on the high end about 18 months ago.
Am I missing something or expecting too much from Flash?
Thanks,
Mike (who seems to know enough to be dangerous) -
Replace one swf movie with another
I have a flash movie on my web page and I have made some of
the text inside the movie into buttons. The movie only takes up a
portion of the page. I would like to replace the movie with another
movie when somebody clicks the button.
I'm sorry if this is a really basic question but I have spent
ages trying to find out how to do it and I keep getting an error
when I try to search this forum.
Thanks for your help.Thanks for your help so far. I seem to be having more and
more trouble though!
I have a swf file (sunnyserv.swf) that contains a pre-loader
and then opens another swf file (downturn.swf). The downturn.swf
contains the buttons that I want to listen to, and swap out the
movies.
If I open sunnyserv.fla in flash and test the movie, it loads
downturn.swf, listens to the mouse click and runs the
communication.swf movie (although it doesn't clear all of the
children from downturn.swf).
However, if I export all three movies and open my web page
nothing happens! If I change the xhtml to load downturn.swf that
works ok. Any idea why it would work in test movie but not when
loaded into an xhtml page?
Also, can you see a reason why all of the children are not
being removed in the commClickHandler function?
Code below:
sunnyserv.swf (container)
var l:Loader = new Loader();
l.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS,
loop);
l.contentLoaderInfo.addEventListener(Event.COMPLETE, done);
l.load(new URLRequest("downturn.swf"));
function loop(e:ProgressEvent):void
var perc:Number = e.bytesLoaded / e.bytesTotal;
percent.text = Math.ceil(perc*100).toString();
function done(e:Event):void
addChild(l);
removeChildAt(0);
percent = null;
downturn.swf
import flash.events.MouseEvent;
import flash.events.EventDispatcher;
import flash.display.MovieClip;
var l:Loader = new Loader();
// add listeners for each button
btn_communication.addEventListener(MouseEvent.CLICK,
commClickHandler);
function commClickHandler(event:MouseEvent):void {
for(var i:int = 0; i < numChildren; i++){
removeChildAt(i);
l.load(new URLRequest("communication.swf"));
addChild(l);
stop();
Hope somebody can help! -
hallo,
I am trying to embed an SWF into an FLA (My website)
I want to embed an SWF movie on page 4 of my website along with other content.
There are a lot of tutorials on the web, but to be honest, I get so confused, a lof of them have errors so I figured i'd ask here if anyone knows of a good, simple tutorial on how to embed SWF in FLA.
thanks so much.The mask would be a separate layer that sits above the layer your animation is in. So if you right clicked the layer the animation is in and selected mask, then that's not masking it, it turning it into a mask. What you want to do is create another layer above it and draw a rectangle that would be the same size as the stage of the swf. Then if you right click that layer it and select mask, the rectangle will be the mask for the anoimation--allowing only what is beneath it to be viewed.
-
Can CDHtmlDialog play swf file with audio component?
Hello, I'm using CDHtmlDialog in our application to play swf that shows user how to do a workflow. It works fine if swf does NOT have audio; if the swf has audio component, then it does not play.
Can CDHtmlDialog play swf with audio?
If not, any suggestion on how to implement playing swf file with audio?
Many thanks in davance.Hi PingHu,
How do you play the swf file in a html. I tried play a swf file with audio in my CDHtmlDialog class. I just use this:
Html code Play the SWF file.
<!DOCTYPE html>
<html>
<meta http-equiv="X-UA-Compatible" content="IE=edge">
<body>
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="200" height="100">
<param name="movie" value="filename.swf">
<param name="wmode" value="transparent">
<embed src="D:\html directory\swf filename.swf" width="400" height="500" type="application/x-shockwave-flash" />
</object>
</body>
</html>
Then my sample is able to play a SWF file with audio. Hope this helps some.
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Help! I accidentally deleted my fla file, but still have the
SWF? Is there any way to convert swf to a layered fla file?
Or any other way to quickly re-create the layered file. Being
new to Flash, I spent (too) many hours on this project to lose it
with the (accidental) click of a button.theres a software called flash decompiler, or you can use
imperator, google them -
When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?
Hi Brian,
Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
Thanks for your help though!
Pernille
Maybe you are looking for
-
How do I get my DAQPad-6020E channels to show up in LabView7?
When I try to access my DAQPad-6020E using the DAQ Assistant Express VI in LabView 7 and I go thru the configuration it tells me that there are no physical channels available. How do I get the DAQ channels to show. All the other NI software sees the
-
HT201343 The Model Identifier: MacBookPro9,2 support AirPlay Mirroring?
I have the MacBookPro9,2. This model support AirPlay Mirroring? If the answer is yes, I could enable it?
-
How to set a value in dashboard prompt based on user id
Hi i have a requirment like i need to set a dashboard prompt value based on user's login.i.e.if i login as administrator the adminstrator is belongs to circle(my requirment)then the circle name willbe displayed in dashboard prompt . if any idea pease
-
I tried to download version 8.0 - how do I know what version I have?
When I tried to download version 8.0, like others have found it does not seem to "take". Firefox, I suggest you get on this with some assistance while we are still with you.
-
Can you stream video to a PB?
I just got a PB - is there a way to stream video to a PB the way that you can with an iPad using Air Video? Either on your LAN or over the net?