Swf with embedded videos pauses in PDF output (CP6)

I've created a CP project that includes several simulations recorded on slides. The HTML and HTML 5 outputs run smoothly, but the PDF output pauses at the end of each embedded video. Is there a setting or property that will run the entire swf without pausing?

Hello,
Welcome to Adobe Forums.
Is your Simulations are Video Demo & Automatic Recording ?
Thanks,
Vikram

Similar Messages

  • How do I play FC swf with animation & video inside interactive pdf?

    Hello...good people! I want to create an interactive PDF using a published FC swf (offline view version) with flv video and animation. The problem I'm having is with video playback inside the pdf. EVERYTHING ELSE WORKS EXCEPT VIDEO! It's as if Acrobat is not reading the asset folder (where the video file is located) created by FC. All animations work and even the video control (skin) appears! Just....no....video!
    When I RUN PROJECT (inside browser), everything works perfectly!
    As a matter of fact, I am able to create damn-near-the-same SWF (with flv video playback and animation) inside InDesign CS5 (hint hint!) using the animation and media panel and Export> SWF command (and again everything works perfectly!)
    In case you want to know how I do it, here's how it works....
    1. Drag-and-drop your SWF created in InDesign into Acrobat 9 Pro or Pro Extended.
    2. When the INSERT FLASH dialogue box appears, check SHOW ADVANCED OPTIONS. Click the RESOURCES tab. Click the ADD DIRECTORY button. Then, locate the asset folder (with flv/f4v video) associated with your SWF. Click OK.
    3. And bam!!...the SWF (video playback and animation) should appear and play as soon as the dialogue box closes.
    But remember...this is with InDesign CS5! How do I do this with FC? Why does everything work BUT the video playback when I follow these same steps after publishing from FC? WHAT AM I MISSING OR DOING WRONG?!!! I know I can do a lot more with FC and I want to see the same awesomeness of FC interactivity in my PDF as I see in my browser!!! If InDesign can do it, I know there's a way FC can!!!! Now....a little help please!
    Thanks,
    Big Waddy

    Hi,
    Interesting application for the Fc output.  I tried this out and it seems to work fine.  Here are the steps I went through.
    Created the fxp file and output the result
    Created the pdf
    From inside Acrobat Pro, I selected the Multimedia > Flash Tool and then chose the area in the document where I wanted to place the Fc output
    I chose the Main.swf for placement
    Acrobat Pro places the file
    I saved the pdf and then opened the file in the browser
    A play button appears and works when pressed
    Not sure what would happen when placed on a server.  Expect that you would need to keep all the files in the correct path/relationship to each other.
    Hope this helps.
    Tanya

  • OSMF swf with embedded video play

    Hello,
    I tried to play swf(which embedds video) as SWFElement, but strange
    thing happened - sound is playing but no video. Does it have something with codec support?
    Or should I try MediaFactory?
    Thank you in advance,
    Kioshin10

    Hi Silviu,
    Thank you very much. I succeeded in playing it
    http://osmf.org/dev/1.5gm/setup.html
    "Preview and update" mode, but it doesn't work in "Construct Debug URL" mode.
    In "Construct Debug URL" mode it behaves much the same like in my custom OSM player,
    where I'm trying to play it with:
                serialElement.addChild(new SWFElement(new URLResource(MY_URL)));
    I can hear sound, but no video. I'm getting a lot Security Sandbox errors, which is quite starnge since audio plays...
    *** Security Sandbox Violation ***
    SecurityDomain 'http://cdn454.telemetryverification.net/tv2n/content/rb/gaviscon_hotdog_uk_linear/r0001/ga viscon_hotdog_uk_linear_450x360.swf' tried to access incompatible context 'http://is1.j.tv2n.net/tv2n/instream/tv2n_instream_as2.swf?startLoadingTime=pse113003187733 59&flashVer=pse1WINx2010x2c1x2c102x2c64&version=pse1INSTREAMx2dLOADERx2dAS2x2dr0001&tv2nis id=pse1130031877335963611&tv2nreferrer=pse1httpx3ax2fx2fcachex2etheatre247x2ecomx2fstreams x2fflashx2fadx2fukx2fswfx2fukx5fGavisconProjectAustinx2eswf&tv2nheight=pse1250&tv2nwidth=p se1300&tv2nspaceguid=pse1BcC4HYZYNJO8x2d33x3aandx7933&cb=13003187733903961'
    <...>
    *** Security Sandbox Violation ***
    Connection to  halted - not permitted from http://is1.j.tv2n.net/tv2n/presenter/deploys/instream_as2_live/r0019/tv2npresenter.swf?btf =0&heatmap=0%2E1&cdns=http%3A%2F%2Fff1%2Etelemetryverification%2Enet%2C0%2E7%2Chttp%3A%2F% 2Fcdn454%2Etelemetryverification%2Enet%2C0%2E3&allowimpactevent=1&hold=2&ad=%2Fcontent%2Fr b%2Fgaviscon%5Fhotdog%5***%5Flinear%2Fr0001%2Fgaviscon%5Fhotdog%5***%5Flinear%5F450x360%2E swf&cid=BfgiSEqRRgPY&bid=B%28VRXUI0CpHg&adid=BfgiSEqRRgPY&itm=3&sid=2865653081484045918&sh owcontrols=0&startLoadTime=1300318773359&tv2nisid=130031877335963611&doc=http%3A%2F%2Fcach e%2Etheatre247%2Ecom%2Fstreams%2Fflash%2Fad%2***%2Fswf%2***%5FGavisconProjectAustin%2Eswf& instreamOriginatorLanguage=AS2&instreamOriginatorVersion=r0028&instreamOriginator=INSTREAM %2DPOWERTRAIN%2DCAROUSEL&noidle=1&asinterface=1&manuallystartpresenter=1&spaceheight=250&s pacewidth=300&spaceguid=BcC4HYZYNJO8%2D33%3Aandy33
    -- Remote SWFs may not access local files.
    *** Security Sandbox Violation ***
    Regards,
    Kioshin10

  • Pause and play timeline with embedded video

    I have created a banner that is currently being used at  www.bandg.co.uk
    I have been asked if it is possible to add a video to this banner.
    However, the problem I have is with the banner having mlutiple slides.
    What I am looking for is a way of having the timeline pause when the video is clicked on, then for the timeline to continue when the video is paused (basically making the video a start and stop command button).
    Thanks for your help.

    Can anyone help with this??:
    I have created a Keynote presentation for a trade show consisting of slides and some slides with embedded video. How can I set this to play without cutting the video short or stopping at the end of the video?

  • PDF documents with embedded video ?

    Is it possible to use the iPad to read PDF (or any other e-document format) with embedded videos ?
    I'm asking because I know someone who wants to publish interactive educational texts in an e-book format.
    Thanks,
    -Sven

    Leslie,
    No, nothing yet.
    I'm wondering if a browser based solution might be easier but I'm not sure if you can load html files onto an iPad for off-line reading ?
    -Sven

  • How do I create/host interactive articles with embedded video for use in browsers?

    I'm seeking a little guidance -
    How do I create/host interactive articles with embedded video for use in browsers?
    The aim is to bring together video, design, images and writing in one place. A little like Born Presents, but very accessible and user friendly.
    I'm happy using InDesign but want to create interactive articles / magazines that have embeded video files as required. I've been looking at .SWF files but I've come unstuck.
    I want people to view the articles via a blog, ideally with them opening in a lightbox style viewer. It's not intended for tablet viewing and people should be able to view and interact with the files with little effort on their part.
    I think I know how to create these files within InDesign, but I'm not so hot on web design and I'm not sure how to host these online. Does this start coming into the realms of Flash?
    If anyone could point in the right direction I'd really appreciate it - Thank you in advance.

    PDF is one thing. Folios for DPS is another. There is a little bit of
    overlap but not much.
    The interactivity in the folio overlays panel is for DPS only.

  • Help with embedding videos

    Hello,
    I please need help with embedding videos from youtube. I do this via the Web panel (not the video panel) and copied the embed code on Youtube and pasted it into my Indesign CS6 (autoplay activated). I did it according to that helpful video: http://blogs.adobe.com/jlockman/2013/06/04/embedding-youtube-videos-into-your-dps-project/
    However, when testing this on my iPad, only a white box appears and I cannot press a play button.

    Are you sure, that you changed code from youtube?
    Code from youtube is:
    src="//www.youtube.com/embed/KulFWmvbEu4
    but you need to change it to
    src="https://www.youtube.com/embed/KulFWmvbEu4
    For us, best result is to embed video via:
    menu Object > Include HTML (don't know exact english name of menu), paste iframe code with correct http link and then it works.

  • Embedding SWF symbol with embedded video

    AFAIK from Google search result, there is no official support
    on embedding flv/mov into flex yet, so I take an alternative route,
    which is not success yet.
    I have built a swf with Flash 8 as the library of assets.
    Inside the library, there are 12 videos set to be controlled by the
    timeline, each is placed into a MovieClip with identifier set as
    "videoSymbol1"..."videoSymbol12" respectively.
    Then I use a class to collect all these embedded MovieClips.
    However, if I try to create a few objects of different
    classes within the same screen update interval, mostly all the
    objects becomes the last called class on display, or the Video
    inside the movie become damanged. However, if the object belongs to
    the class "symbolCls_1", it will just be fine.
    By running code in the Action Code section inside the code
    attached, only c1 displays the correct video, while all c2 to c12
    display either messed-up video or the video of symbolCls_12.
    However, if I create objects of one same classes, it is just
    fine.
    Other than loading external flv, see if there is any other
    solutions on this. Thanks in advance.

    My ultimate goal is to embed all the assets and program into
    one swf for deployment as I don't feel comfortable exposing the
    assets. And, since these assets are created and destroy very
    frequently, I'm wondering the performance issue if I use SWFLoader
    to load it just when I need to put the video on stage.
    What about loading the external swf's as a template, and do a
    byte-clone on creating the video instance?

  • Problems with embedded video

    Thanks Dave
    Re the no controls in SWF problem, I did try adding the SWF resources. Camtasia places all the products of production in a folder, I loaded the main swf as the media and went Add Resources and added everything else, but still no controls appear when it runs. Camtasia has  Preview option available at the production stage and I ran this and it showed controls.
    Re the clip extending beyond window problem, Is there some way of posting a picture of the troublesome window? I tried a few tests. Firstly I embedded the clip with floating window and the default window size (320 * 240). It ran fine (although the clip was way too small) with the clip centred in the window, black bars on the right and left between the clip edge and the window boundary, with clip extending to the top and bottom of window. Next I doubled the window size, everything OK again but clip too small. I trebled the window size, still OK. When I set the window at four times default size (1280*960) the problem occurred. It looks exactly like the clip is extending beyond the right hand border of the window. You can see the windows’ X (close window) button on its to right corner, but it’s about an inch (to the left) in from the clips top right corner. It looks  like there may be some maximum window size.
    Thanks again.
    I am very new to embedded video so forgive my ignorance here. I am creating clips with Camtasia and embedding them in a pdf with Acrobat pro X. I have tried SWF and MP4.  The clips are large so I have set them to run in a floating window. There are two issues:
    Although I have set the Width and Height slightly larger than the clip, I get a black band up the right hand side and the clip appears to extend beyond the Right hand side.
    No matter what settings I use, when I embed a SWF I get no controllers when the clip runs.

    Thanks Dave
    Re the no controls in SWF problem, I did try adding the SWF resources. Camtasia places all the products of production in a folder, I loaded the main swf as the media and went Add Resources and added everything else, but still no controls appear when it runs. Camtasia has  Preview option available at the production stage and I ran this and it showed controls.
    Re the clip extending beyond window problem I think I have worked out whats happening. The clip was definitely extending beyond the right hand edge of the Window. You can see the windows’ X (close window) button on its to right corner, but it’s about an inch in from the clips top right corner.  However I experimented with various window sizes, smaller sizes worked fined but big windows created the problem. Then I noticed that when I moved the window, it is not fully floating on the desktop,as is the case with an avi loaded from a hyperlink, but floats in the pdf document. As I stretched the pdf's right hand edge (made the pdf window bigger) the extent to which the clip extended beyond the clip window decreased until it disappeared. I can understand that if the pdf window is too small you won't be able to see all the clip window, but something still seems a bit wrong here to me. If you have the pdf window maximised the clip appears centred in the clip window. If you drag the clip window to the right the window and clip remain together as they disappear beyond the pdf window. This is the behaviour I would expect to see in a smaller pdf window, it seems wrong that as you shrink the pdf window that the clip window shrinks in a manner which is out of sync with the shrinking of the clip itself, which is what happens. I can send a picture or avi if you like.
    Thanks
    Murray

  • Embedded videos in Interactive PDF play sluggish

    I have created an Interactive PDF using Indesign CS6. It is a 43 page pdf with a video embedded on 5 of those pages. When the final PDF is played on a PC, the videos seems to play sluggishly after watching a previous video. It seems there is some sort of background process going on once the videos play that hampers the playback of the next video. Has anyone else had this issue?
    Thanks,
    MD

    Thanks for your reply Dave.
    The .mp4 videos are imported into InDesign and are controlled using one of the Skin options from the Media tab which allow the user to Play/Stop/Seek/Mute/Vol.
    The video sizes are 677k, 2.7mb, 3.9mb, 13.2mb, and 13.4mb.
    Also, when I'm playing a video with audio, if I decide to go to the next page before stopping the video, the audio still plays in the background even though I'm on a different page. It doesn't look like there are too many options to choose from on the Media tab in InDesign so I'm wondering if there is something I'm missing to have more control over the video.
    Thanks,
    Michael

  • No sound with Flash 9 with embedded video?

    this is very strange. i cannot get any sound w/ Flash Player
    9 in Internet Explorer (IE) with playing embedded video. problem
    occurs with many websites with embedded youtube or other flash
    videos. when those sites are loaded, the sound bar was set to zero,
    but there is no sound even if i drag it to a higher level. yet,
    when the same video is played from youtube directly, it works
    perfectly.
    when i uninstall Flash 8 or 9 and reinstall an older version
    such as Flash 7, the sound plays perfectly without problem in all
    website wth the sound bar set to the correct level.
    i am running win xp professional sp2. latest updates/patches
    installed. ie 6.
    i have tried the following:
    1. the k-lite codec trick - does not work.
    2. scanned for virus/spyware - none found.
    3. uninstall all Flash w/ adobe uninstaller and reinstall the
    latest build - does not work.
    4. clean out all registry entries related to flash and
    reinstall - does not work
    5. deleted quicktime - does not work
    can someone please help me?

    plz help

  • Html export with embedded video won't play on ipad

    Keynote 6.0 for Mac - when you export a keynote as html, if there is embedded video, the video will not play on an ios device.

    HI and welcome to Apple Discussions..
    If you didn't repair permissions after updating Safari, try that.
    Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done.
    Also, go to ~/Library/Caches/com.apple.Safari. Move the cache.db file from the com.apple.Safari folder to the Trash.
    Restart your Mac.
    Carolyn

  • Problems with embedded Video in Safari

    I have an issue when I try to open an embedded video within either safari.
    I can not open anything, and if the embedded video is Quicktime based, I just get the large 'Q' (Quicktime) sitting in the middle and no video.
    Can anyone help or tell me how I fix my Plugins within the browser please?
    Many Thanks
    Gary

    How to view/hear pretty much everything:
    Assuming you already run OS 10.4.9 or above and have Quicktime 7.2, and are using Safari 2 or 3, download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
    RealPlayer from http://uk.real.com/player/
    Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
    Perian from http://perian.org/
    Adobe FlashPlayer from http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
    In Quicktime Preferences, under advanced, UNcheck Enable Flash, and under Mime settings/Miscellananeous only check Quicktime HTML (QHTM).
    In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them).
    The world should now be your oyster!
    You should also have the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.

  • Embedded Video in Interactive PDF from Indesign (click to activate! grr!)

    Hi guys
    I am trying to put together an interactive PDF newsletter which has a video and a small slide show in it.
    I am pretty new to this interactive element of indesign.
    The video seems to have embedded fine (it is a FLV file), but when I view the PDF and hover over it I get a click to activate message.  While this is useful in telling the user to click on it, I would much rather it was nicely greyed out with the small play triangle in the middle and worked when the user clicked on that.
    I guess my issue is a presentational one mainly.  Does this make any sense to anyone?!
    Thanks

    The way the PDF plays in Acrobat or Reader (this is what you're using, right?) is nothing InDesign has any control over.
    So this really should be posted in the Acrobat forums. However, I don't believe there is any way you can modify this message, I'm afraid.

  • Issue viewing multiple embedded videos in single pdf

    Hello,
    I am having trouble viewing pdfs with more that three videos embedded.  For some reason only the first three videos play correctly.  All successive videos play a copy of one of the first 3 videos.
    If I change the order in which I view the videos I can see all of them however after the third I have to reopen the pdf.  This is very annoying for presentations.
    Any help would be greatly appreciated.
    Brett

    You might as well ask this in the Acrobat forums. InDesign has absolutely nothing to do with the play of multimedia in Reader or Acrobat. It only is the agent for embedding the video.
    However, if you set too high a resolution, bit rate, etc. when you created a video that would play a part.
    The Rich Media & 3D Acrobat forum is probably the best place to ask:
    Rich Media & 3D

Maybe you are looking for

  • ORA-06502/ORA-06512 at execution owa_util.mime_header

    Hi, APEX gurus! I try to write a procedure to display bfile contention /images/ into APEX page. I have a table : -TEMP_FLAGS (ID NUMBER(3) NOT NULL, NAME BFILE) - procedure display_country_flags_bfile display_country_flags_bfile (p_id NUMBER) is CURS

  • Dispatching events...

    Hi, I am working on a project for a system that will not have a mouse. Ideally I would like the screen to function almost like a video game would -- even though it is not a game. By this I mean that all keystrokes are handled at the window level and

  • Sort album by artist or album by artist/year & compliations behavior

    I am running iTunes 10.4.1.10 on Windows 7 (64-bit) I was wondering about the behavior of sort album by artist or album by artist/year. Instead of sorting solely by artist or artist/year, it seems to take into account album artist. Is this correct? P

  • My Itunes Won't Open, Already Updated It

    Ok, I updated my I-Tunes because but it still won't open. I don't really know what else to try. It was working fine twenty four hours ago. Any ideas?

  • How to find active implementation of badi/

    I have made badi which have two implementation when i access badi , how do i know that which badi implementation will get called....? how to find that ,plz let me know.. Saurin Shah