Swf won't play live

My shockwave files play fine in dreamweaver when I test them in the browsers but once I uploaded them they are not showing up I have no idea what I am doing wrong. My site just went live and looks horrible without the swf files it is: www.dmaexpressions.com
PLEASE HELP! Thank you in advance.

Fix all these errors
http://validator.w3.org/check?uri=http%3A%2F%2Fwww.dmaexpressions.com%2Findex.html&charset =%28detect+automatically%29&doctype=Inline&group=0
Entirely Flash site will not rank on Google
SWF playing OK on Firefox & IE6

Similar Messages

.swf won't play - blank screen

Hello,
I had my flash designer take a 16MB .mpg file and convert it
to a 2MB .swf
file.
I created a "blank" .hmtl page and dropped in the .swf -
which shows up as
the white box on this page:
http://emerge-solutions.com/pland
(this link will forward you to the page.)
After I got a blank screen, I uploaded the .flv (2MB) and the
.fla (14MB)
files to the server as well (same folder as the .html file)
but that didn't
help - same blank screen.
Can anyone help me understand why this .swf won't play?
Thank you in advance!

It plays fine for me.
Tested in Chrome, IE7, and FF3

Captivate 4 published SWFs won't play suddenly

Hello, I have been happily making Captivate 4 training, using a template. The published SWry mF movies have been playing just fine... on my PC and several others.
But today went to show off my work to the boss... who HAS successfully played previous Captivates I've made, and they won't play.
Double-clicking the HTM, or trying to open the SWF from the browser just shows a blank white screen that does nothing. What would cause a published SWF, etc., to suddenly not play on selected machines... the owner doesn't remember chanigng anything...
And, what would be my trouble-shooting sequence to try and fix this problem?
Thank you very much

Hi there
Same dog, different leg action. In other words, what you linked to is a red herring.
What I mean by that is the article you linked to is referring to an inability to preview from Captivate 3. You are talking about Captivate 4 and the issue doesn't seem to manifest until after you publish, right?
Sure, Flash Player 10 may appear to be the common link at the moment, but we don't know for sure. With Captivate 3, the issue was only with preview. The output worked just fine. So the issue there is with an internal mechanism in Captivate as you work to create your content. What you are seeing now is certainly related to the internals of Captivate, but 4 is a new beast. It would seem that 4 has maybe introduced something causing this for you.
There may have been a few other posts related to this phenomenon. But they are very few and far between. Given the widespread use of the Flash Player, if it were solely an issue with the Player, I might expect we would have seen loads of reports. But we haven't.
I'll be very interested to see what you discover. Out of curiousity, I'm guessing you have attempted different combinations of settings? AS2 VS AS3, externalizing items, etc.?
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Updated SWF won't play in browser anymore

I recently made a word change, that's all, to my fla file and exported the updated swf file. It plays in preview just fine, as well as when typing in the direct url - www.bicesandiego.com/about.swf but won't play on its own after I uploaded to the server.
I am not a programmer and received these files from the client, but I have made changes to this very file before and it worked fine. Now, it will not show when I go to the about page. Any thoughts?

If the main file loads the about file, it may have a mask that needs to be extended. But since you say you only changed a word, as opposed to adding a number of them, I don't see what that would have done to change anything. So you must have changed something else in the process of whatever you were doing.

My Flash SWF file inside of my Flash Catalyst SWF won't play when previewed in Dreamweaver?

However, when I preview the flash catalyst swf file, the flash swf thats inside, plays just fine. any suggestions or solutions?

Does the one swf load the other swf? If so, is the one swf in the same folder as the html file that embeds it?

Swf won't play after uploading - white box

I've posted a couple of previous times and gotten nothing but
dead air, so I'm still trying to find a way to get flash movies to
just play on a web site. Is it that hard? I hate flash. Why doesn't
it just work?
I'm trying to put a video gallery up and currently have eight
.swf video clips that all begin downloading simultaneously when the
page is opened, hogging bandwidth that should be reserved for
whatever one video the user chooses. I can't find a way to keep the
clips from downloading until the user clicks the play button. And I
can't put a buffer delay in. Everything I can find on a buffer in
Flash says to change the BufferTimer in the components inspector.
But I HAVE NO BUFFERTIMER IN THE COMPONENTS INSPECTOR!! I've got
Align, AutoPlay, CuePoints, etc., but no BufferTimer! I swear I
must have a faulty version of Flash CS3.
So I'm trying to get around it by using a gallery of images
that link to individual pages with one .swf file. It all tests fine
on my local machine, but once it's uploaded, the gallery images
pull up pages with a big fat white box where the .swf should be.
What gives?
And while I'm ranting about the difficulties of Flash, I'll
rave about the ease of use of Dreamweaver. Why can't Fl be more
like Dw? ie, coding not required. I've been trying to wrestle this
Flash gallery into reality for more than a week and I'm on the
verge of reverting back to embedded Quicktime files.
BTW, does anyone know of a Flash forum people actually? I
haven't gotten a response at Creative Cow or here.
Sorry for the rant; I'm at my wit's end.

I am having the very same problem. When I post the swf file
and call it up, all I see is a white box with my play button and
stop button at the bottom. Both of these buttons work and it looks
fine once you hit the play button. But I want the swf to come up to
the first frame which should be a picture of a person -- not the
white box!
Did you ever find out how to fix this problem? I'd be ever so
grateful to get help on this one.
Thanks!

.swf won't play from webserver

Someone hijacked my last post, so here it is again.
http://www.milkmoonkids.com
There is a brown square that has a .swf loaded into it. It
plays locally, but not when I upload it to my webserver. Any idea
what is going on? I appreciate any advice.
Thanks,
Rich

Of course without seeing and testing the page, it's impossible to tell for sure whats wrong. Can you post a link to the actual page.
That being said, my first guess is that it's being published with something like this in the <object> code:
swfversion 11.0.0.0
... meaning that some version of Flash player 11 is required to play the .swf. For viewers with that version installed it works, for those without, it doesn't.This has been a real common problem when "Publish" sticks that version 11 requirement in the code.
So open the HTML page. find that part of the <object> code and edit the code to read swfversion 10 instead.
Use DreamWeaver or NotePad or whatever to edit... but without seeing the page, that's my best guess.
Best wishes,
Adninjastrator

SWF Won't PLAY!!!!

I'm fed up at this point. I have inserted a SWF that I created using e-Learning Brothers Flash interaction. The SWF plays fine outside of Captivate, but when I insert it into a slide, it does not play. However, if I go past the slide and then click the rewind, the interaction plays as expected. What am I doing wrong?

Your object tag (which I.E uses) is for embedding Director
content, not
Flash:
<object
classid="clsid:166B1BCA-3F9C-11CF-8075-444553540000"
codebase="
http://download.macromedia.com/pub/shockwave/cabs/director/sw.cab#
version=8,5,0,0" width="200" height="100">
Remove '_spamkiller_' to mail

Quicktime won't play live webcast....error msg about plug in

Movie trlrs, advertisements, even archived webcasts can be viewed, but when I try to view a live webcast all I rcvd is the QT player loading the broadcast then stops. Clicking on the Q an error msg says plugin was found but an error has in the plugin has occurred. Help please!

What do I do?
Frankly, if you have deleted the original movie clips from your camera/camcorder and iPhoto, then it sounds as if you are up the proverbial creek without a paddle and there is nothing further that you can do.
Some facts:
For some reason, the movieclips are awful small (13-30 KB).
640 x 480
Codecs: H.264, AAC
While these facts are of little value without file duration information, as you yourself have already noted, the file sizes quoted are extremely small. A typical VGA H.264/AAC file of reasonable quality would normally have a combined total data rate in the 700 to 1,700 Kbps range depending on specific settings, profile, and level of the encoding software and could be even higher or lower depending on the quality levels required. Therefore, it is reasonable to assume that files in the 13 to 30 KB range only contain 104 to 240 Kbs and either have durations measured in fractions of seconds or do not actually contain enough data to be played. (E.g., the video data may be missing or the file is corrupted.) Thus, it is most likely that something was wrong with the workflow used to "export" your files to the external drive and when you ignored the fact that the files were not playing correctly, you closed the door on anything that you could do when you deleted the source files. (I.e., the normal workflow here is to copy the entire iPhoto library to the external drive, switch libraries, confirm the new library is working properly and only then delete the boot drive copy of the iPhoto library.)
OBS: When I try to convert the files into something else (AVI, MP4 whatever) either it comes with an error, nothing happens or the converted file wont open. This happens with various convert-programs.
If the data in the files is missing, then there is nothing to be converted by any application.

.swf won't play when published, but will in DW

I had posted this a few days ago, any help would be greatful, thanks so much.
first off, I have looked just about everywhere else to find this problem and no other solutions have worked yet.
here's the problem
I have 4 pages
3 are made from templates and one isn't
on the template ones, I have a .swf and when I publish it, it plays.
on the non-template homepage, I have a .swf file and when it is published, it doesn't load at all.
I have tried many things.
- build a new .swf and place it in there
- rebuild the homepage
- make the homepage into a template and then put the flash in
- and probably some other things
the file name is correct, the source name is correct ( /folder_name/file_name.fla)
it is correctly in dreamweaver and when I preview everything works.
any help would be greatly appreciated...I really don't want to start over from the beginning just to see if it works.
http://gpretak.web.officelive.com
thanks so much,
Greg

Hi
All your file references are to your local hard drive, change these to reflect your site structure.
<link href="file:///C|/Documents and Settings/Pretak/Desktop/ron art/site_layout.css" rel="stylesheet" type="text/css">
<link href="file:///C|/Documents and Settings/Pretak/Desktop/ron art/site_layout_mainpage.css" rel="stylesheet" type="text/css">
<script src="file:///C|/Documents and Settings/Pretak/Desktop/ron art/Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
PZ
www.pziecina.com

SWF Won't Play Locally or In Browser

I put an .swf file on the home page of my site. When I try to play it locally (preview in Safari, Firefox, or Chrome) I am in given this message.
When I try to view it online on any of 3 previous browsers I simply get a blank screen. On IE it attempts to download a later version of Flash but nothing happens.
I'm guessing something is wrong with the .swf they are referencing but is was provided to me by Flash along with the actual .swf I exported. I imagine it will actually be necessary for the viewer of my site who doesn't have Flash. Any thoughts?

This appears to be a Dreamweaver problem. I never, ever, use Dreamweaver, and so I'm not the best person to parse out a problem. I tried the same thing that you did with an .swf of my own and I got the same error message.
It seems that the problem is with the default html that Dreamweaver writes when you embed a Flash file. There is a line:
<param name="swfversion" value="17.0.0.0" />
The number "17" is the problem. You need to change that to the number of the Flash player that you are designing for in Flash. If you've left Flash's Publish settings at their defaults, then you are designing for Flash Player 11. So you need to change that number 17 to 11 in the html.
To find the Flash Player value that Flash is using, go to the File menu and select Publish Settings. A new window will open. In the upper left is an option labeled: Target. This is the player version that Flash is using.

Swf won't play in captivate

Hello all,
I am trying to import a swf file I made with Crystal
Xcelsius. When i open the swf in any program (flash player, flash
8, ppt, etc) it works fine.
When i import it into captivate 2 I can see it properly in
the placeholder but when I preview or publish it doesn't work. I
have tried turning the compression on/off and all flash 6-8.
nothing works.
I have uploaded a tiny swf copy to see if anyone can help me.
It can be found here.
http://www.mediafire.com/?cmdowz4zone
any help would be appreciated.
Thanks,
Mike.

Mike Bubyn -
quote:
Larry, could you elaborate a little more on the AS issue. I
think you right and this is my problems lie (these ones any way).
Where can I access the AS to play around with it? (PS, I've tried
it in C1,C2, C3(beta))
Understand that to export Captivate 2 project files
(*.CP) to Flash, you must have Flash 8 loaded on your machine. That
said, in the same sense that you can choose to publish a Flash
project in a variety of specific versions (Flash ver 6, ver 7,
etc), you can also choose to publish it to conform to a specific
version of Action Script. For instance, in Flash 8 the default AS
is 2.0, but Captivate version 1.1 only supports AS 1, so you can go
to the "File > Publish settings ..." and on the Flash Tab,
select AS 1.
Hope this helps Mike ~
Later
EDIT: I reread my reply above and realized I hadn't really
answered your actual question, to wit, "
where can I access the AS ...". The answer is, export the
Captivate project to Flash, or (same thing a different way ...)
open Flash 8 and create a "New (Flash) Document", then use File
> Import > ... to Stage (or Library). This will open the
Captivate project in the Flash 8 environment. Then to set a
different AS, use the Publish options I mentioned earlier.
**TO ALL: Some Flash geeks treat Captivate as a "add-on" to
Flash, and recommend doing things in Flash that only lead to
problems for the un-Flash person who reads their comments. Be
careful!!! Opening your Captivate project in Flash, or attempting
to edit it in Flash can lead to clinical depression and
tremendously high psychiatric consultation costs UNLESS you are a
Flash geekster. Thanks for listening...

Swf won't play in browser

I have a problem with my swf file playing in the browsers. It works fine when I play it outside the browsers, but as soon as I load it to the site...it doesn't play. Please help.
www.thelusciousstore.com

The best guess I can hazard at the moment is that you are missing some other files (possibly swf's or image files) that the index.swf file is trying to load.
If you do have other files that it loads and you have placed them where you believe they need to go, can you explain that arrangement folder-wise?

Flash SWF won't play in captovate

Hi all,
I've created a simple flash file in Flash CS3 and published
the SWF and HTML. The SWF and HTML both play fine.
Now I want to insert this into a Captivate file. I have tried
two methods:
Insert Animation into a blank slide
Insert an Animation slide
Both appear to work file to the extent that I can see the
animation in the CP file. However, if I do a preview or publish of
the cp file, the animation isn't playing. What have I missed? Both
the original flash file and the CP file are set to 30fps.
Thanks for any advice.
Cheers
Mike

Hi Mike
What exactly does your Flash file do? I've seen reports that
some Flash files don't much like being inside of Captivate and
refuse to work properly. But of those, some were referring to
outside resources and others had some "interesting" interactive
effects going on.
Cheers... Rick

MP3 Player .swf Won't Play in Dreamweaver

I've made a Flash mp3 player that plays just fine when opened alone. But when I put it into Dreamweaver, only the images appear, but neither the script appears nor the music plays?
I've moved all associated files into the same folder in Dreamweaver, including the xml file, etc. Any idea on what I can do to make this player work?
Thanks!!!

The best guess I can hazard at the moment is that you are missing some other files (possibly swf's or image files) that the index.swf file is trying to load.
If you do have other files that it loads and you have placed them where you believe they need to go, can you explain that arrangement folder-wise?

Swf won't play live

Similar Messages

Maybe you are looking for