SWG and MSI Geforcefx 5900 Ultra

Everytime I log onto the game i get to the loading galaxy screen and crash back to desktop. I tried messing around with refresh rates and got it to work once but then it stopped again. Im giving up plz help me out!

GreatMilenko911,
There is a problem with the SWG Galaxy Loader, it is posted in the SWG Tech Support Forum.
Just to be sure, what are the specs on your hardware, OS and power supply?
Take Care,
Richard
a.k.a. Marauders
Human Commando
Tatooine
Chilastra Galaxy

Similar Messages

MSI GeForceFX 5900 Ultra 256mb N-box prob...

I recently acquired a new VGA, it’s a MSI NBOX nVidia GeForce FX5900 Ultra 256MB DDR2 8x AGP video card and I’m having some problems with it. Before this card I had a GeForce 3 Ti 200. I know the basics about motherboards but I don’t know them inside and out. Basically I know the slots and such, but I don’t really know what board I own. I believe it is a M810LR motherboard and I’m running an amd athlon 1.2 Ghz processor on it with 512 RAM with I believe 310 watt power supply.
Anyway that is my system I’m running on so onto the problem. I installed the card into the AGP slot, and it fit nicely. I powered on the PC and it worked, I saw all proper boot up screens, I got to windows ME and of course my desktop pixel quality and color was dumb down because I assume the question of new hardware. I put in the driver CD and installed the driver that came with the VGA no problems with the installation, then of course it asked to restart and I allowed it to. I saw all the correct boot up screens and when I got past the windows ME screen, my monitor went blank when it should have showed my desktop. The monitor was acting like it was not receiving any signal; I checked the connection and it was good. The monitor was acting like it wasn’t receiving anything so I restarted, and again the same problem.
I forced the system to start up in safe mode and it worked, but of course you cant get to a CD drive in safe mode and I want it to run outside of safe mode so I tried one more time in normal mode and the screen went blank again. It was working before with the regular nVidia driver before I installed the MSI driver so I figured I would try that, so I took out the GeForce FX5900 ultra and put my old GeForce 3 Ti 200 back in my PC so I could see what I was doing. Worked fine, so I reinstalled the nVidia driver turned off the PC and put the GeForce FX back in the PC, turned it on and saw all the proper boot up screens, got past the windows ME screen, got to my desktop, and 30 seconds later it freezes, I try it 4 more times and every time it ends up with 30-60 seconds of working fine then the freeze.
I heard great things about MSI products and I would just like mine to work properly.

Ive been dreading upgrading to win XP for a while now, to afraid that I will loose some games or info (like GTA 2).. but im ready and going to upgrade it in 4-5 days. Oh and dont worry if it dosent work, you'll hear from me
-Jim

Problems MSI GeForceFX 5950 Ultra

PC specifications:
Satellite PSU 500W (422) this one is really cheap...
PC ATX CASE with 3 exaust fans (1 pci / 1 lateral / 1 back)
MOBO ABIT NF7-S
Atlhon XP Barton 2.5 ghz (thermaltake vulano 9)
2x 512mb ram (1024) samsung PC3200 in dual channel mode.
HD Maxtor ATA133 80GB 7200rpm
LG CDRW
Mouse MS blue optical USB
PS2 PC clone gamepad
Keyboard and flopydisk
Problem - Some freaking FPS slowdown on any game with any video quality settings (battlefield, farcry, doom3, Wining Eleven 7, Need for Speed Underground, Unreal 2004, Jedi Academy and others).
What I already have checked - I just got my new video card, msi geforcefx 5950 ultra, and i got some minor stability problems. First of all I would like to say that I'm no newbie and I already checked:
1. I got all lastest bios and drivers: from my MOBO chipset (nforce2) and video card (from the MSI site, not from the nvidia site).
2. I think it couldn't be any compability problems with my MOBO chipset (it is nvidia too) and video card.
3. Any thermal problems (I'm very paranoic about that), got 3 fan\exaust on the pc case, and i only use thermaltake coolers/exaust.
4. My ram memory clock it is set to 333mhz just like my fsb for more stability.
5. The video card IRQ it is fine.
6. Bios configuration. I've test my AGP settings with and without AGP Fastwrites and PCI enchant (other bios options u guys have told me to leave as default like agp voltage and clock settings).
7. My PSU is 500w (422) and the I didn't connect anything on the power line that goes to the card.
8. I used driver cleaner 3.2 to clean my last msi fx 5200 drivers.
so here we go...
Question one - I've read all the posts just like mine, and seems that my problem it is with the PC PSU, but my PSU it is 500W, it was pretty cheap but it is 500W and u guys and the video card manual have told me that the minimum required it is 350w, well the specs of the PSU it is +3.3v 28A, +5V 50A (230W), +12V 18A (216W). I saw in some post that my card would need a 24A on the 12V line, and a 32A would be the real deal for overclocking, is that true? Will I have to buy another one???
Question two - By the way I used to have a msi geforcefx 5200 tdr-128, and when I changed the Video cards I just unistaled the video card drivers, is it enought? Or there is some freaking windows registration of my 5200 driver corrupting my 5950 performance. Will I have to Format my PC???
Question tree - Why when I try to an output video resolution below 640x480 to ANY TV (already tested on 5 TV) with S-video or RCA cables, the video files (divx/xvid...) get all overlapped???
Question fuor - If I change my drivers from de MSI nVidia to the original nvidia, will I get more stability???
So can u guys help me... thanks

1.) You should be ok with 18 amps on the 12v rail, but that is bare minimum!
If you have poor airflow in your case, the power supply's efficiency will drop considerably due to excess heat. The voltages/amps can drop below acceptable levels and cause instability.
2.) It is possible that leftover registry entries and bad keys are crapping up your registry. If it's been a while since you've reformatted and you've installed/uninstalled lots of software since then, it might be something to consider.
However, I reccomend that you dump MSI drivers for the time being, and try the latest Forceware, go here for the latest nVidia Drivers you can also visit the archive if you'd like an earlier version here http://ftp://download1.nvidia.com/Windows/
Consider this procedure and use at your own risk.
Make sure to have the latest drivers downloaded.
I.) Disable System Restore and then procede to Control Panel and remove the VGA drivers. DO NOT REBOOT
II.)Run driver cleaner (I click the clean button at least twice) NOW REBOOT
III.) Ignore the hardware wizard and go directly to where you have the latest drivers and run the setup.
You may want to consider fresh chipset drivers.
3.) Not a clue
4.) Possible, but the overall condition of your OS, the process in wich you install drivers, and proper cooling, can have either an isolated or accumulative effect on overall stability of your system.
And Just to let you know, MSI employees don't visit this sight, a simple bump would eventually get someones attention (that's willing and able to answer your questions)
Suggestions on posting and getting better answers

Msi geforceFX 5900 problem

Hi i have an msi geforceFX 5900 in an asus a7n8x board which was working fine until i installed and uninstalled some of the msi utilities (the 3d one i think). now in the display properties (win xp) the msi clock says invalid pNvuclockInit in a messagebox and the clock/memory settings are worng or ?
I tried reinstalling the nvidia 44.03 driver but is still the same.

lol installed msi driver and fixed it

Will a MSI NBOX 5900 Ultra fit in the new mega 180?

has anyone tried to stuff a msi gffx 5900 ultra nbox version into a mega 180? does it fit? i am considering purchase but the i can smell the irony coming when i think about trying to fit my monster msi video card into that tiny msi box.
Zwit

HI
yes ive put a msi 5900 xt and the fan is also 26 dba
all this works fine
ms 180 deluxe
3000 xp
lg 4082b
1 gig ddr 333
msi 5900xt
250 gig fdb hdd
120 wd hdd
thx

GeForceFX 5900 Ultra

Any ideas on when MSI will be realeasing the GeForceFX 5900 Ultra? This card sounds like it's going to majorly kick some butt.

PDiddy,
Here is a little something to get you in the mood:
Read all about it here:
MSI FX5900 ULTRA, FX5900-TD128, FX5900 VALUE SERIES
Take Care,
Richard

MSI FX 5900 ultra or PowerColor 9800 Pro

Hi
I have the following system but I am stuck with the Graphic.
Intel Pentium 4 'Northwood' 3.0CGHz (800FSB)
MSI 875P Neo-FIS2R
Corsair 1GB DDR XMS3700 TwinX (2x512MB) Platinum CAS3
LiteON LTN-525(S) 52x CD-ROM
Sony CRX220A 52x24x52x CDRW IDE
Pioneer DVD-120 Tray Load
Seagate Barracuda Serial ATA V 120GB
Thermaltake Xaser III V2000A Aluminium Super Tower
Antec TrueBlue 480W PSU
Creative Audigy 2
WIN XP PRO
My ? is which graphic card shall i buy MSI 5900 ultra or PowerColor 9800 Pro with 256 MB???
Thanks. ?(

ATI is supposed to have better picture quality and better AA quality, but most reviews admit it's a pretty close call.

MSI FX 5900 Ultra...

hi,
i bought this one a few days ago and was
just wondering why this card have no MSI TWIN FLOW
cooling system (it only have the nvidia referenz cooling).
does the 5900 ultra have no twin flow?
or should i have to change it?
p.s. sry for my bad english.
greetz

ATI is supposed to have better picture quality and better AA quality, but most reviews admit it's a pretty close call.

MSI NBox 5900 Ultra wont work at 8x AGP

I recently bought a MSI 5900 Ultra 256 in the NBox package. I installed it and loaded the latest drivers and began playing DAOC. It was great for half an hour then it locked up. I also had an issue where my refresh rates were really bad and it was drawing like one frame every 10 seconds.
I rebooted the pc and turned off 8x agp. Botted it back up and played for the rest of the evening.
I just put in a new 500 watt PS with a 32A 12 v rating, so I would hope the PS isnt at fault. I also had recently cleaned all my nvidia drivers off the machine as I had installed an ATI 9600xt.
Please help.
I already spent a week working on an XFX 5900 ultra that I ended up sending back, I dont want do that again. Also, I have noticed a number of other folks here who have had the same issue.

I have the latest bios and drivers on my pc. I am not too sure what the grease has to do with it not working in 8x mode. I am not real sure what the 3.3 and 5v Amps are actually. The image on the website is very blurry. I looked up a review and found this information:
3.3v 28 A
5v 30 A
3.3v / 5.0v Combined Load - 200W
3.3v / 5.0v / 12.0v Combined Load - 480W
The review was found here:
http://www.systemcooling.com/modules.php?name=News&file=article&sid=1371
I am going to try a full whip and reload of my machine. If this doesn't work I guess I will return the card and go ATI from here on out.
Could this have something to do with the fact that the motherboard is an nvidia chipset? Do MSI mother boards have issues running nvidia FX cards?

MSI GeforceFX 5600 Ultra Question

I am trying to figure out how i can make my TV and my monitor both display my screen, i have composite cables, and all the adapters needed, and it works fine when installed alone. I had my tower hooked to my tv by just the composite cables, displayed fine. I did the same on my computer's monitor, without the TV out connector in, and then i installed them both, and when i had the monitor plugged into it's correct port and the Composite out thing connected to where it should be, the TV became my monitor. I then used the adapter to connect to the 2nd slot, and my monitor is the default monitor, but my tv will not diaplay anything. any help would be greatly appreciated. Thanks.

Try tweaking the display properties using nView utility.

When the GeforceFx 5900 Ultra will be available??

does anyone know???
any answer will help, bye

not to long now ,saw the first review of it by chance yesterday
http://firingsquad.gamers.com/hardware/msi_geforce_fx5900-td128_review/

FX5900 Ultra and MSI Media Center Problems

Hi,
I've just got an MSI GeForce 5900 Ultra VTD256 card which came with MSI Media Center Deluxe II. However, when I try to install it, it starts the install and then gives the error "This is not a qualified MSI system".
Can you offer any help?
Thanks,
Karen
My system is:
Pentium 4 2.4Ghz
1Gb DDR RAM
Gigabyte GA-8PE667 Ultra
MSI GeForce 5900 Ultra
WD 160Gb RAID
Windows XP SP1

Quote
Originally posted by KarenH
Hi,
Thanks very much for the welcome to the forum!
I will try using \"O\" rather than \"0\" and see if that helps. Fingers crossed...
I didn\'t think that I needed an MSI motherboard to install Media Center - just the MSI video card? What I do wonder as well is that, since all of the first FX5900 Ultra cards are actually manufactured by Nvidia for companies such as MSI, is this why the software doesn\'t recognise the card as an \"MSI\" one? If so, I guess I\'m sunk...
Thanks,
Karen
I wouldn't know on that as I have a MSI board and vid card.I do have a media center from nVidia.If you update the drivers from nVidia, you should get theirs.Unless I am thinking of a different media center.
EDIT I was thinking of a different media center,my apologies.MSI's looks neat, I want one as well.

MSI K7N2-IL 2M/B and MSI MS-StarForce GeForce FX 5900 Ultra

Hi
I wonder if you could help me.
I am curious, the below is the spec of my machine.
AMD Athlon XP 3000 + 333 FSB CPU
MSI K7N2-IL 2M/B
256 GEFORCE FX 5900 ULTRA GRAPHICS
though the graphics card is reported as MSI MS-StarForce GeForce FX 5900 Ultra [Nividia GeForce 5900 Ultra] in Windows control panel.
I am needing to learn more about exactly what is what in this PC.
I have installed MSI Live monitor and have upgraded to NVIDIA nForce System Drivers though my graphic driver is still reported as 4.4.0.3 or 43.51 [another question why are there two versions given to graphic drivers?]
As Live monitor doesn't report any further updates possible when there are newer Nvidia drivers from the Nvidia website - can I install these ?
Also I am looking for a utility to monitor, change fan speed and temperature, is the Nvidia system utility ok to use? It says that it's only compatible with
nForce3 Pro
nForce3
nForce2
I'm not sure if I only have Nforce ?
I would really appreciate any help you may give - I know that the above probably sounds as if I'm as thick as 2 short planks.
Thanks in advance
~ The Doctor.

nVidia Drivers
you can get all your drivers there
both board drivers and vga
you can use speedfan for temp
http://www.almico.com/speedfan.php
boards hardware does not support changing fan speeds though

MSI FX5900 Ultra 256 MB and MSI 648 MAX

I have just installed my new FX5900 Ultra graphics card and when ever the card runs any 3D application for more than a couple of minutes, my PC will instantly shut down. The only way I can get it back up, is to remove my power cable from the PSU and wait about 20 seconds and then the PC will boot again.
I have checked the temperature of the card before and after the shutdown; and the latest Nvidia reference drivers show a GPU core temperature of 37 C. In addition, if I put my original GeForce 3 back into my computer, I experience no problems.
Looking on the internet, I have come across other people who have had a similar problem and this was resolved by changing the AGP slot to run at 4x rather than 8x. I have gone through the 648 Max BIOS and am unable to find anywhere where I can step down to 4x AGP.
Any Help Will Be Greatly Received.
Regards,
Macross

Thanks for your help guys. Whilst I have not been able to pick up my new powersupply, I have removed the Q-Tec 400W and put my old 300W PSU back, and guess what?? My PC has not shutdown since.
This power supply lark is totally new to me, and it does seem that a good quality 300W PSU can be better than a average 400W. I have never looked at the 3.3, +5 and +12 before, just the total wattage. Well, you do live and learn. Though it would have been nice if MSI put information like this in the manual of the card, or the WEB FAQ's.
I shall pick up my new 520W PSU on Saturday. Then I can put this new 5900 Ultra through its paces!!
Thanks
Macross.

45.23's Resolved SBA Issue on MSI 5900 Ultra

Couldn't enable SBA on MSI 5900 Ultra with 45.20 drivers. Fast Writes was ok. 45.23's resolved issue allows me to select, but have to reset after each reboot.

The motherboard chipset drivers (excluding those for the onboard LAN and audio) were installed before the nVidia drivers.
I re-installed the operating system (item 3 in my first post).
P.S.
Just used Driver Cleaner and tried again but still no joy.

SWG and MSI Geforcefx 5900 Ultra

Similar Messages

Maybe you are looking for