SWIFTMX message mapping in Financial Message Designer

Hi,
Is it possible to create a mapping between an external message and an internal message in SWIFTMX format like we do in SWIFT MT format? If so can anyone tell me how it can be done.
Thanks in advance!
Deepak

With little knowledge in this field, I think Oracle Payments Adapter may help you in implementing the same.
http://www.oracle.com/us/technologies/soa/service-bus-fsi-ds-066433.pdf
Regards,
Anuj

Similar Messages

Get the mapping values from one message mapping into another message mappin

Hi All,
I created two graphical message mappings. In first message mapping i created one user defined function and set one global container parameter and I need to use this parameter in my second message mapping user defined function. But the global container parameters can be used in different user defined functions in same message mapping. So is there any way to use the values which are set in one message mapping into another message mapping. If yes, please help me how to get?

Hi Koteswara rao,
As you said global container parameters from first message mapping are not accessible from second message mapping program.
i haven't faced situation like this.but, if you have some unmapped field in target message in first message mapping,you can put global variables data in that unmapped field.
anyway the output of first message mapping would be input for 2nd messages mapping,so you can access global data(unmapped field filled with global data in 1st MM) from 2nd mapping program..
Cheers,
Jag

XML message mapping considering idoc message variant

Dear Experts,
I am very new to PI. I am working on a scenario where I need to map VGON_OUT xml message from SNC system to ORDRSP.ORDERS05 inbound idoc of ECC 6.0 system.
The issue is :
In the inbound partner profile in ECC there are two ordersp message types. one with message variant SMI and another without any message variant.
Both of them are using different process codes for processing.
So my question is how to map the VGON_out xml message in PI?
Please note: the key difference is the idoc message variant.
There is no way to merge both of these message types as their function is serving two different purposes.
I have attached the xml file and the screenshot of the partner profile here.
Any suggestion or reference link or document would be deeply appreciated.
Thanks in advance.
Praty

Hi Pratyusa,
Did you try with different partner profiles for each ORDRSP?
Regards,
Krupa

Runtime Execption Message Mapping

Hi,
I have created a scenario, receiving a sequential text file. The receiving container (CT1)is a process container type:abstract interface. CT1 is specified as source message for the following transformation process. Target message is a CT2 specified as abstract interface and process container. The transformation process creates the above mentioned error. The messages mapping test in the design repository is successful.
Any ideas why this error occurs?
Cheers, Jo

Thanks for that hint. I still have problems to configure the adapter as required for the interface. The interface has an XML structure like :
<?xml version="1.0" encoding="UTF-8"?>
<ns:BPNO xmlns:ns="http://pcs.acn.com/basicdata">
<BPNO>12345</BPNO>
</ns:BPNO>
and the adapter either needs to have the document name or the adapter deletes the value of the fields like this:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns:BPNO xmlns:ns="http://pcs.acn.com/basicdata">
<BPNO />
</ns:BPNO>
Any ideas how to specify the adapter?
Any help is appriciated!

Accessing container variables from ccBPM in Message Mapping?

Hello Friends,
I have created a ccBPM and require to send response messages to the sending system at different points as the message proceeds from one state to another. I do not want to create multiple message mapping stating different status in every message mapping. The message mapping remains the same only the status is changing. So I am thinking if I can access container elements in ccBPM at message mapping then I should be able to use only one message mapping. Is it possible at all?
Let me know if you have other solutions. Let me know if I am not clear?
Thanks & Regards,
Anand Patil

Hi Abhishek,
Your suggestion to use Parameterized Mapping did solve my issue. I was looking something like this. Thanks.
Now I have only one Message Mapping and it is used in multiple places. Thanks a lot
Best regards,
Anand Patil

Filtering of records in Message Mapping

I am facing problem during filtering record in message mapping. My message comes from R3 and should be sent to one business service in entirety and should also be sent to another business service in part. To resolve this I created a message map for selecting record based on some conditions but this creates empty XML nodes wherever condition is not satisfied. Everything works fine but the scenario fails at the end while trying to convert XML to text using file adapter. The error is Conversion configuration error: Unknown structure '' found in document', probably configuration error in file adapter (XML parser error)

Hi Rajesh,
This scenario you are trying can be done using CONDITIONAL RECEIVER DETERMINATION and RB SPLIT, where you can basically have one sender and two receivers.
To do this without using a BPM.
1. Create your mapping program that will map the information from the source file
into the destination idoc. This has to be a 1:N split. Just make sure that the destination message type and message interface are are of occurrence N.
2. Also, you will have 2 destination interfaces and 2 interface mapping, one for the IDOC and one for the mail.
Now, there are a few essential steps in your configuration,
1. In the receiver determination, specify the 2 receiver systems, one for your IDOC and the other for your MAIL.
2. Now, you will have a condition window. Just type the condition on the basis of which the receiver has to be determined for the mail and the idoc business system. Just remember that the condition can be specified only for the source message.
3. In the Interface Determination, you have an option called RB CLASSIC and RB SPLIT. To do a 1:N split, you will have to do a RB_SPLIT.
And since you wanted to covert the XML format to text format you require content conversion at the receiver adapter end, for that please go through these links below. It clearly explains your requirement.
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/frameset.htm
I hope I have answered your query.
Regards,
Abhy
note: do reward points for the helpful answers.

Regarding Message Mapping in JDBC Scenario

Hello Experts,
I got struct up in message mapping. In message mapping we can able to see different types of Functions. So I need some clarifications on it. Functions are available like...
Conversions
Boolean
Node Functions
Constants
Date
Text
Static
Arithmetic
So please explain in simple for each functions.
Points will be rewarded.
Thank you

Hi
*Boolean*:-
And -- checks for 2condition, return a true value if both condition are satisfied
Or --checks for 2condition, return a true value if one condition is true.
Not - checks if the condition is not equal to.
Equals - Check whether 2 Boolean values are equal
NotEquals
If u2013 Returns second value if the first argument is true. otherwise returns third argument
If WithoutElse u2013 Returns value of second argument, if first argument is true.
Node Functions:-
createIf - Produces empty value if argument is true; Resultlist.SUPPRESS otherwise
removeContexts u2013 Produces plain stream of values with No context changes
replaceValue u2013 replaces value of source field to value specified in Function Properties.
Exists u2013 Returns true, if Node exists otherwise false
SplitByValue u2013 inserts context changes after event specified
collapseContexts u2013 Produces one empty string value out of each arguments context. All arguments are in one context
useOneAsMany u2013 Use First Argument as IS on same level as third argument. second argument defines when next value of first argument is used
sort u2013 sorts values in each context
sortByKey u2013 Sorts values in second queue by keys from first queue
mapwithDefault u2013 Inserts default values specified in the function properties into empty contexts
formatByExample u2013 Takes values from the first queue and inserts them in the structure of second queue.
Constants:-
Constant u2013 Generates constant value
CopyValue u2013 Takes specified value in argument stream and copies it an infinite number of times
Sender u2013 Sender System
Receiver u2013 Receiver System
Date:-
CurrentDate u2013 Return current date in specified format
DateTrans u2013 Transforms date from input format to output format
Dateafter u2013 Returns True if first date is after second otherwise false
DAteBefore - Returns True if first date is before second otherwise false
CompareDates u2013 Compares two dates
Text:-
Substring u2013 Returns substring depending upon the given parameters
Concat u2013 concatenates 2 strings inserting delimiter string parameter between them
Equals u2013 Check whether Strings are equal
indexOf2 u2013 returns the index where the second string is found for the first time in the first string
indexOf3 u2013 As with indexOf with 2 parameters, But starting search at the specified position
lastindexOf2 u2013 Returns the index where the second string is found for the last time in the first string
lastIndexOf3 u2013 As with lastIndexOf with 2 parameters starting search at the specified position
compare u2013 compares 2 strings lexicographically
replaceString u2013 Replaces each occurrence of pattern(2nd argument ) of source string(1st arg). By third string
length u2013 returns length of string
endsWith u2013 Tests whether string ends with specified suffix
startsWith2 u2013 Tests whether string starts with specified prefix
startsWith3 u2013 Tests whether string starts with specified prefix beginning at specified location
toUpperCase u2013 Converts all characters in string to upper case
trim u2013 Removes white space from both ends of string
toLowerCase u2013 Converts all characters in String to Lower case
Statistic:-
sum u2013 calculates sum of all numbers in each context
average u2013 calculates the average of all numbers in each context
count u2013 Counts number of values in each context
Index u2013 For each incoming value, this Function returns the index number of the incoming value in the context, String from the initial index and increasing by the increment defined in the parameters.
Arithmetic:-
Add u2013 add two values
Subtract u2013 subtracts second value from the first value
equalsA u2013 Returns true; If float numbers represented by argument strings are equal otherwise returns false
abs u2013 returns Absolute value of argument
sqrt u2013 Returns square root of the number
sqr u2013 Returns square of the number
sign u2013 Returns -1 if number is negative, +1 if positive, 0 if 0
neg u2013 Multiplies number to -1
1/x u2013 calculates 1/x
Power u2013 Returns value of the first argument to the power of the second argument
Less u2013 Returns true if the first number is less than the second number otherwise false
Greater - Returns true if the first number is greater than the second number otherwise false
Multiply u2013 Multiplies 2 values
Divide u2013 Divides first value by the second value
Max u2013 Returns maximum of 2 numbers
Min u2013 Returns Minimum of the 2 numbers
Ceil u2013 Returns the smallest (closest to the negative infinity) initial value that is not less than the argument and it is equal to the mathematical integer.
Floor - Returns the largest (closest to the negative infinity) initial value that is not Greater than the argument and it is equal to the mathematical integer.
Round u2013 Returns closest initial value to the argument
Counter u2013 Counts number of invocations. Initial value and increment defined by Parameters.
FormatNum u2013 Formats Number with given pattern.
Conversions:-
FixValues u2013 Creates a Local Table to perform a value Mapping
ValueMapping u2013 Define jump to Value Mapping table of Integration Directory.
Message Mapping(Node Function) Part-1
Message Mapping Simplified - Part I
Sravaya Talanki- Message Mapping(Node Function) Part-2
/people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii
Standard Functions
http://help.sap.com/saphelp_nw04/helpdata/en/43/c4cdfc334824478090739c04c4a249/frameset.htm
Advanced mapping function(mapwithdefault,formatbyexample,sort,sortbykey)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9202d890-0201-0010-1588-adb5e89a6638
Hope this is useful
Saiyog
Edited by: Saiyog Gonsalves on Jul 11, 2008 1:14 PM

PI 7.1 Operation mapping - Multiple message mapping - one to many issue

Dear Experts,
I am facing this issue in PI 7.1 and I beleive i did similar one in PI 7.0 successfully.
I have an operation mapping with two message mappings.
The occurence of source message of operation mapping is 1
The occurence of target message of operation mapping is 0..unbounded
Corresponding i configured two message mappings
For message mapping-1
Source message occurence = 1 and Target message occurence = 1
For message mapping-2
Source message occurence = 1 and Target message occurence = 0...unbounded
When i test message mappings individually they are working good. But when i test it in operation mapping, the operation mapping is not working..as it is not able to convert single occurence output of message mapping -1 to the second message mapping-2.
Any suggestions?
Thanks.

The message that i get when testing in operation mapping:
Runtime Exception when executing application mapping program com/sap/xi/tf/_MM_MessageMapping_1_; Details: com.sap.aii.mappingtool.tf7.IllegalInstanceException; Cannot create target element /ns0:MT_MessageMapping_1_TargetMessageType/RECORDSET. Values missing in queue context. Target XSD requires a value for this element, but the target-field mapping does not create one. Check whether the XML instance is valid for the source XSD, and whether the target-field mapping fulfils the requirement of the target XSD
My question is, has somebody mapped similar scenario in your environment? If yes, can you please provide details.
Operation mapping : 1 to 0..unbounded
Message Mapping1: 1 to 1
Message Mapping2: 1 to 0...unbounded

CcBPM Process Number in the Message mapping

Hi,
I have a requirement to map the ccBPM's process number in which the Mapping error has occured to be mapped to a specific field in the target. I wanted to know how could I pass the BPM's process number to the message mapping ( this message mapping(Service mapping) is a part of the same BPM). If we could get the MESSAGE_ID of the message in the message mapping, we should also be getting the BPM Process number.
In other words, when an alert is triggered in BPM, we get the BPM process number in its subject, i need that BPM process number in to the message mapping where that message has to be stored in a table in ECC.
I have searched in help and SDN to check if some system properties can help, but i couldnt. Any help/inputs from you is highly appreciated.
Regards,
Kalpana.

Hi Manuel,
it is very easy to to get the <b>Message ID</b>, which is unique and useful for selecting a message in the monitoring
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/b3/9a2aeb24dc4ab6b1855c99157529e4/content.htm">Special Access to Mapping Runtime Constants</a>
You send a mail from Java Mapping or, what would be the standard, (as additional) message from BPM or just as normal Message Receiver or only in Error case as Alert receiver.
Regards,
Udo

Is there pre-configured message mapping for SRM Content?

Hi,
My requirement is to do a message mapping between the SRM Message "Purchase Order Request" and the R/3 Idoc Orders01. Is there a preconfigured message mapping in SRM content or will I have to do it?
I see the generated proxy class from the outbound message interfacePurchaseOrderRequest_Out which will carry the message to XI and my requirement is to map it to the Interface ORDRSP.Orders01 Please let me know if there is a pre-configured message mapping for this ? or is the message mapping between the message "Purchase Order Request" and the R/3 IDOC ORDERS01 to be done by the developer himself?

HI,
There are mappings available in the predelivered SRM content from SAP.
Did you import the SRM content into the repository? If so , you can find this.
www.service.sap.com/ibc -> Integrated Business Content for mySAP SRM->
Hope this helps,
Rgds,
Moorthy
Message was edited by:
Krishna Moorthy P

XI Configuration Design questions with multi-mapping message mapping object

Hello,
I'm having trouble designing a particular scenario for multi-mapping. Currently i'm working with a Vendor create and change. BPM is not being used.
This is what i need:
I need a CREMDM04 to turn into one or multiple ADRMAS/CREMAS IDocs and potentially a CLFMAS IDoc based on the values in the inbound CREMDM04 IDoc.
This is what i currently have:
A CREMDM04 inbound idoc is multi-mapped to a CREMDM03 (1...9999), another CREMDM03 (0...9999), and a CLFMAS01 (0...9999). At a minimum only the first CREMDM03 IDoc will be created and at a maximum all three will be created. The parameters on creating the second CREMDM03 IDoc and the CLFMAS01 IDoc are based on the values in the inbound CREMDM04 IDoc, whereas the first CREMDM03 IDoc will always be created and the values will just be converted/mapped from the inbound CREMDM04 IDoc. This multi-mapping is currently set-up via a graphical message map and works successfully in the test-tab of the mapping object. It has a main message and has sub-messages which are the IDocs. Im mapping the CREMDM04 to a CREMDM03 to then map it through an ABAP-Class and then to an XSL where the CREMDM03 inbound structure is expected to split into ADRMAS and CREMAS Outbound IDocs for Vendor Create/Change in the remote R/3 systems.
After the graphical map we have a necessary ABAP Class call that calls a BAPI to the remote system. This ABAP Class must come after the graphical map since the parameter for the BAPI is based on a converted value from the graphical multi-map.
After the ABAP Class call there is finally an XSL message split the CREMDM IDoc into an ADRMAS and CREMAS IDoc. There need to be two interface mappings (one per ADRMAS and CREMAS) since the ABAP classes and XSLs are specific to the ADRMAS and CREMAS.
The CLFMAS IDoc can go directly to the remote system, but since its within this one multi-map, Im not sure if is possible? Im not sure if it will fail once it tries entering the XSL mapping (this is the standard CREMDM message split offered from SAP).
There are three interface mapping scenarios I can think of, but cannot get to work:
CREMDM04 to ADRMAS02
CREMDM04 to CREMAS03
CREMDM04 to CLFMAS01
Currently I have the Interface Mapping structured as follows: (I cannot get this to activate as it appears it does not work)
Multi-Mapping ==> ABAP Class Call ==> Standard XSL Message Split
How should i design the interface mapping objects and the configuration objects for this scenario?
Any help is appreciated and I definitely will reward points (no need to include it in your response).

Hi,
I suggest you may use multiple steps interface mapping. It's composited with 3 message mappings as step by step.
Mapping 1: One to one mapping. For the output schema, use a composition schema which includes those 3 IDOCs you want.
Mappign 2: ABAP Mapping. I am not sure the ABAP class you mentioned is an ABAP mapping or not. If it does, That's ok. If not,
call that ABAP class in your ABAP mapping and do corresponding change for your message. Return back the same structure as output.
Mapping 3: One to multiple mapping to split the message.
So basically as interface mapping, it's one to multiple mapping. And internally, you have 3 steps to realize the mapping.
And as my experience, for both one to multiple message mapping & multiple steps interface mapping, it works well in my project. And
in ID, you have to configure it via "advance" function in receiver determination or interface determination.
Let me know if any confusion.
Thanks
Nick

How to enable message mapping tools in design integration buldier?

Hi,
The message mapping tools like 'Map selected fields and substructures if names are identical', 'Clear mapping', 'Data flow editor', 'Text Preview', 'Dependencies', etc are not enabled in our PI. The version of PI is PI_BASIS 2005_1_700 and the java version installed on PI server is 1.4.2. Is it something to do with compatibility or options to be enabled in some settings? Please help.
Regards,
Priyanka S

Hi Priyanka,
Uninstall Java 1.4.2 and try to reinstall again it should work.
Regards,
Naveen

Message Mapping Design Question

I have to parse from a source field (x) and map to this structure:
<Line>
<Number\>
<Descr\>
<Code\>
</Line>
The source field is a string that contains newline characters (just a blob of text). Example:
ABC\nLine 1,widget, 123A\nXYZ\nLine 2,gadget,123B
I need to get at the line number, description, and code mapping values by parsing at newlines and then parse into the "Line" records. I want my result to look like this:
<Line>
<Number>1</Number>
<Descr>widget</Descr>
<Code>123A</Code>
</Line>
<Line>
<Number>2</Number>
<Descr>gadget</Descr>
<Code>123B</Code>
</Line>
Is there a way to chain message mapping functions and/or UDFs and do something like this? In addition, I don't see how I can specify multiple target fields in one mapping. Any suggestions would be appreciated. Thanks!

Raj,
Unfortunately, the source structure is not well structured. It contains lines of data, of which some begin with "Line", and then a line number and other fields separated by commas. It also contains unused lines.
Production example of source data (with breaks at each newline character):
APPROVED
Tracking Reference: 20070629063604.1
Process Date: 06-29-2007 07:38:59
Listed below are the following items listed for review:
Contract: ABC Delivery Order Number: HTCH
Items reviewed:
Line 1, 10 EA, 000000000099784711, S01-004, 20070629063604.1_1
Line 2, 10 EA, 000000000088078625, 03356.63.04, 20070629063604.1_2
..where "1" maps to <Number>, "S01-004" maps to <Descr> and "20070629063604.1_1" maps to <Code>.

Problem in message Mapping SAP PI 7.1

Hi Experts,
I have a problem in my Message Mapping,
Design: [Design|http://www.life-4-music.de/prob.jpg]
Messagemapping: [MappingTest|http://www.life-4-music.de/probII.jpg]
The Problem is, that ElementC from SourceMessage occours "0 to n" times in Element A, but I need to check every ElementC in ElementA to TargetElementA with a IF Statement.
I tried a lot of things, like change the CONTEXT of the ELEMENT or use SPLIT BY VALUE but without success.
Rgds,
Steffen

Hello, thanks a lot for the fast awnser. I tried this allready to change the Context of the Elements "system" in this Mapping: Changed Context
For Example in one field I check for Entry "ERP" in Source Field "system" , if "ERP" is in the first ELEMENT then it will be mapped correctly: Example ERP works
But If "ERP" is in an element below, then it doesn´t work, so it seems to be, that he only map the first occurrence of the Elements. : Example SCADA don´t work
Here is the View of the QUEUE from the don´t working Example: Show QUEUE of not working Example
maybe u have a tip for me again , because I´m allready desperate
Thanks a lot.
Rgds,
Steffen

Message mapping in PI 7

Dear Experts,
In XI 3.0, we have created some interfaces that now have to be migrated to PI 7. I know XI but I have no experience with PI 7. Now I have some problems during this migration:
1) From the IR, I exported a TPZ file from the software component we created, but how can I import this in PI? I used "import design objects" but then I get an error when I try to edit the object: "Original language Dutch for current object collides with permitted display or editing language EN"...
Then I can only display the object, not edit or even copy it...
2) in PI, how can I create a message mapping between 2 messagetypes? Basic question but I just can not find it.
Hope you can help me out. Thanks in advance,
William.

>
> In XI 3.0, we have created some interfaces that now have to be migrated to PI 7. I know XI but I have no experience with PI 7. Now I have some problems during this migration:
>
> 1) From the IR, I exported a TPZ file from the software component we created, but how can I import this in PI? I used "import design objects" but then I get an error when I try to edit the object: "Original language Dutch for current object collides with permitted display or editing language EN"...
> Then I can only display the object, not edit or even copy it...
>
The interfaces in XI 3.0 used default language Dutch, but in PI7.1 you have selected it as EN, this may be cause error.
> 2) in PI, how can I create a message mapping between 2 messagetypes? Basic question but I just can not find it.
>
it is simple, right click on name space-->select new-->then select Mapping Objects--> select message mapping new,then add your two message types
before that you have to create data type and message type.
Regards,
Raj.

SWIFTMX message mapping in Financial Message Designer

Similar Messages

Maybe you are looking for