SWIM Jobs show failed but all images are in flash

I performed a software distribution on two different 3750 switch stacks using LMS 4.2.3 over a WAN link.
The Job Report shows this:
Copying c3750-ipbaselmk9-tar.122-55.SE4.tar from Software Repository to tftp-specific directory.
Copied successfully to C:/CSCOpx/tftpboot/rep_sw_3381422663941666305
Loading image file to flash device : rep_sw_3381422663941666305 --> flash1:c3750-ipbaselmk9-tar.122-55.SE4.tar using TFTP
Error loading image to Flash. See C:\CSCOpx\files\rme\jobs\swim\5373\3750Stack_telnet.log for the output from the device on which the image transfer failed.
Image Copy Operation Failed
Device is unlocked.
Device Upgrade Result : Failed
However, when I look at the flash on both stacks, the IOS image with the correct filesize, folders, etc. all looks right. The show boot shows it will boot to the correct image. The telnet.log file shows all the files being copied and just ends after the last file (the .bin image).
Does anyone know why this might report as failed even though the files are in flash?
I have not yet reloaded either switch as they are in production.
Thanks.

OK I reloaded one of the stacks and it came up fine.
Could this error be due to the fact that the upgrade was done over a WAN link and I did not put exec-timeout 0 0 on the line vty?

Similar Messages

Imported from cf but all images are mixed up

I have downloaded LR for a 30 day trial. I have succesfully imported images from
compact flash memory card.
BUT The images have not downloaded in order of the time taken. I therefore have a jumble of different photo shoots.
What do I need to do to avoid this happening again ?
How can I quickly sort these into the relevant folders so I can find them again eg: Wedding one, two, three
Thank U - Hoping someone can advise x

Try changing the Sort order from Added Order to Captured Time when in the Library module, either using the View / Sort menu item up top, or using the Toolbar along the bottom of the Grid view that you may need to make visible using the T key.
As far as sorting things quickly into relevant folders, what folder or folders on your hard-drive are the photos in, now, and do the folders already exist you want to move the photos to or will you be creating them?
The way I move photos from one folder to a set of folders I create, is to select the photos I want to move in the Grid view, then go over to the folder listing at the left and right-click on the folder than is above where I want to create a new folder, then choose Create Folder Inside "xxxxxxxx", type in a name and also make sure Include Selected Photos is enabled, and then click Ok.
If the destination folder already exists in the folder list at the left, then just right-click on that folder in the folder view at the left and choose the Move option.

App Store shows 9 updates but all Apps are up to date I have tried re downloading all the updates. All Apps show the correct version number post update.

App Store shows that I have 9 updates but all Apps are up to date I have tried re downloading all the updates. All Apps show the correct version number post update.

I have the same issue with one App in the App Store. The app is installed and current. But the App Store says I have an update. I tried restarting. No help.

Yesterday i bought ipad4 i transfered photos from pc to ipad that it opened in ipad when i click slideshow everything went black. whenever i m opening the application(photos) full screen looking black but all photos are occuping memory.

yesterday i bought ipad4 i transfered photos from pc to ipad that it opened in ipad when i click slideshow everything went black. whenever i m opening the application(photos) full screen looking black but all photos are occuping memory.i can see the pictures in settings>brightness>wallpapers but i couldnt able to see in photos application in ipad4

I have several thousand photos in several folders. I have noticed that whenever I want to change the folder used as the side show source, it takes the Screen Saver Preference pane a very long time to respond. It is as if it is scanning all the photos in the currently assigned folder in order to display them in the preview window provided, and it gets so dogged down doing that it can't respond to my clicks on the Choose Folder option.
Assuming you don't want to redistribute your photos into a greater number of folders or subfolders so there would be fewer in each folder to process, you could try a workaround. Try moving your currently-assigned folder to your desktop temporarily, before opening the Screen Saver preference pane. If the preference pane can't find the old folder, it may immediately ask you to choose a new one. You could hopefully then do so, close the preference pane, and then put back the old folder.
It's my understanding that there will be no future updates to Tiger, only security fixes.

I have pages setup for english but all templets are in spanish

Hello everyone
After trying to reset keyboard preferances and services I am not getting any solution.
I have pages setup for english but all templets are in spanish.
can anyone help to fix this problem?
Thanks
dsd

You mean this?
Sociis mauris in integer, a dolor netus non dui aliquet, sagittis felis sodales, dolor sociis mauris, vel eu libero cras. Interdum at. Eget habitasse elementum est, ipsum purus pede porttitor class, ut adipiscing, aliquet sed auctor, imperdiet arcu per diam dapibus libero duis. Enim eros in vel, volutpat nec pellentesque leo, temporibus scelerisque nec. Ac dolor ac adipiscing amet bibendum nullam, massa lacus molestie ut libero nec, diam et, pharetra sodales eget, feugiat ullamcorper id tempor eget id vitae. Mauris pretium eget aliquet, lectus tincidunt. Porttitor mollis imperdiet libero senectus pulvinar. Etiam molestie mauris ligula eget laoreet, vehicula eleifend. Repellat orci eget erat et, sem ***, ultricies sollicitudin amet eleifend dolor nullam erat, malesuada est leo ac. Varius natoque turpis elementum est.
A: It's Latin, not 'Spanish.'
B: What problem?
Click on this Placeholder text to select it (All of it will be selected on a single click).
Type.
On the first kaystroke, all of the placeholder text is deleted and the first typed character appears.
Carry on.
Images in the templates are media placeholders. Replace them with your images in a similar manner.
For more on placeholder text, see page 75 of the Pages '09 User Guide; for more on media placeholders, see page 137.
The guide may be downloaded via the Help menu in Pages '09.
Regards,
Barry

I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Tha

I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Thanks

What is the problem specifiaclly?
If the images are intended for web use I would recommend converting them to sRGB which could be done with Edit > Convert to Profile or with File > Save for Web, but as including a Save step in Actions and applying them as Batch can sometimes cause problems I would go with regular converting.
You could also try Image Processor Pro.
Scripts Page

When I open PS from LR to edit an image, the thumbnail appears in the side bar but the image area is white, PS CC 2014!

Hi,
I've just started a subscription for the Photographers package, when I open PS from LR to edit an image, the thumbnail appears in the side bar but the image area is white, I'm sure this is a stupid newbie mistake but I can't for the life of me see what I've done wrong.

copernicus1952 wrote:
the thumbnail appears in the side bar but the image area is white
Are you referring the the multiple thumbnails in ACR side bar? I don't use LR but I do use Photoshop and as far as I know Photoshop has no sidebar with image thumbnails.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

HT4527 Shared, transfered, backed up, synced, but all apps are gone...?

Hi,
We have 1 iPad, 1 iPhone, and 3 iPods that need to be moved from old-pc to new-pc.. So I:
- read forums, faqs, etc.
- authorize new-pc
- set up sharing and copy everything from old-pc to new-pc
- transrfer purchases from iPad to new-pc
- do a back up of iPad to new-pc
- upgraded iPad on new-pc
- sync iPad to new-pc
Then, much to my dismay, I see that no apps are present. Music and movies are there, so are some personal settings, but no AppStore apps. "A-ha!", I thinks to myself..."I'll restore from backup!" After which iPad has reverted it's sync to old-pc.
So I curse for a bit and re-sync iPad to new-pc. But all apps are still gone, and the only way to get them back on iPad is to download them from iStore (or whatever the h*** it's called) but all personal app-info is gone.
Please help. How do I transfer iThing ownership from old-pc to new-pc without losing half of everything?
Thanks, oh so very much.
Splats.

How to Restore from a Backup > http://support.apple.com/kb/ht1766
What gets Backed Up
iTunes http://support.apple.com/kb/ht4946
iCloud http://support.apple.com/kb/PH2584
KacieKitKat wrote:
It also did not fix my WiFi issue.
Have you tried this...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.

HT3702 I am being charge for itunes but all apps are free?

I am being charge for itunes but all apps are free? It is possible to get money back?

If you are referring to the temporary store holding charge as described on the page that you posting, which is 'charged' each time that you change the card details on your account, then it should disappear off the card within a few days or so - though it varies by bank, and with it now being the weekend it might an extra day or two. If they haven't disappeared within a week of them being made then you could contact iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
Also some apps may be free to download but they then allow you to make in-app purchases to unlock extra features within them - you can turn off in-app purchases via Settings > General > Restrictions on your phone.

E mail attachments that are deleted show up in all images or all documents; how can I prevent this form happening?

e mail attachments that are deleted seem to still show up in the all images or all documents files; how do I keep this from happening? If an attachment is deleted I don't want to continue to keep a copy anywhere. Thanks.

I know this is almost a year later but I have been searching for a solution to the same problem you had. How did you fix this issue? I can see that something pops up on this site right before a transition. Why does that happen and not show in the preview and how do you fix it? Any help is appreciated!

Coreapplication shows as down in OEM, but all components are up

Hi,.
Just upgraded from 11.1.1.5 to 11.1.1.6.2. All went fine and everything running. Also upgraded WLS from 10.3.5 to 10.3.6
Yet the core application shows as down in OEM although system status reads All components are available
weird .....
diagnostic logs show failed to get status for java components so looks like the console isnt communicating with opmn correctly? Not sure. Everything is running out of the same box except the database.
admin server log presents:
Failed to get status of all of OPMN components for one or more Oracle Instances of BI instance: coreapplication
Any bright ideas please ping them this way!
THanks
Edited by: 869150 on 23-Jul-2012 06:20

SR 3-5707809851 : Managed components missing from diagnostics after 11.1.1.5 to 11.1.1.6 in-place upgrade ==> Bug 14111737; fixed in 11.1.1.7.0.

I have updated my website, and uploaded via FTP, but some images are missing. I have deleted them in i

I have published a website with iWeb on MobileMe quite successfully. I purchased a second domain name, and republished the same site on GoDaddy before trying to point my MobileMe website name to the GoDaddy server. I was unable to upload several pictures to the second site, and posted my dilemma here. It was suggested that I try using Cyberduck to publish via FTP, which I did. I was still missing the same images. The error message says that there was a communications error with the FTP server and to try again later. I have been able to upload several more new images to the second domain name just by using iWeb's publish feature.
I want to point my MobileMe website name, www.melissaveres.com to GoDaddy, which is now hosting www.mveres-engraver.com but it will only show the site as it is currently published, with several missing pictures. I have tried to delete the photos in iWeb, bring them back in, and republish but with the same results. I have contacted GoDaddy support, who can only tell me there is no file information for those open (missing) pictures, they have heard of this happening before, but had no information on how or if it was resolved. Anyone know how to get these pictures up before I move from MobileMe?
Melissa

Bring up the Activity window (Command+Option+A) for you site and check to see what files are missing and where they belong. The URL for the missing files will tell you what folder they should be in.
Then publish you website to a folder on your hard drive and open it locally with your browser. Check to verify all images and present and the site works as you want. Then you can upload the missing files or folder containing the missing files or the eintire site folder to your GoDaddy account with Cyberduck.
OT

Print Jobs Show Complete But Do Not Print

Working with someone that has a MacBook Pro (10.4.11). Were connected to a networked HP-4250 LaserJet. Everyone else can print, when he shows his jobs have completed, but they do not actually print.
I've tried all the variants of Bonjour, IPP, HP JetDirect (deleting each time with multiple restarts), but we still can't get any print outs.
I can also ping the printer and actually log into the setup pages of the printer in Safari.
Recent changes that I'm guessing have something to do with it is that he recently removed HP Director (for All-In-Ones), but I still found some fragments files and folders that I deleted.
He also installed the new scan software for his new Brother's printer. Similar to the HP AIO software. But before I remove that software I'd like to make sure there isn't some other known issue going on. I'm pretty sure I've actually seen this before, but no clue on what the fix was.

Are the others on the network all PCs? Is it possible that the printer's "personality" is set to PCL? That would mean PCs could print, but not Macs (with the preinstalled postscript driver). Fix - set to Auto.
Also try Reset Printing System, then Add the printer again.

PDF File in iBooks but all images blank?

Hi - I have imported a PDF file into iBooks (it is a tearsheet from a publisher of some of my photography that is published). I really need to see the images in this PDF, not just the text. I am hoping to use the iPad to show my portfolio - and this tearsheet is an important piece of this.
Any idea why the PDF would show only text, and not the images? Is there a standard format that is missing here - or some incompatibility? When I view the PDF on my mac, it works fine. on the iPad, none of the images are shown.
Any help would be greatly appreciated!
-Josh
http://JoshTrefethen.com
http://facebook.com/JoshTrefethenPhotography

I have had mixed success. In some of my PDFs the images show, in others there are missing. Most have been down loaded from the Web, so there is no information on how they were made. One that was generated by printing a powerpoint to PDF looks great. All of the PDFs that were processed by Acrobat to Reduce the File Size were NOT readable for versions 6 or higher. Only the version "5 and up" had visible images. Other Acrobat operations, such as remove hidden objects, did not mess up the images.
There appears to be a formatting disagreement between Apple and Acrobat for versions 6 and higher.
good luck

Error message when uploading book for printing. All images are jpg and rgb. Could they be too large to upload? What size is required and how do I reduce size in Aperture?

I receive an error message when I upload my book for printing. Not sure what the problem is. All my images are jpg and rgb. Could they be too large as it takes about 15minutes to upload to Apple. How do I reduce the size of the image in Aperture?

Hi Leonie,
Thanks for your reply.
Error message below. The preview is fine . I can discount the first 2messages as its a new computer so plenty of disk space and upload doesn't seem to be interrupted. I have uploaded to iphoto before. have tried to upload 3times with the same error message. I had to photo my slides with a Kaiser Baas photo maker , which apparently doesn't scan but takes photos in megapixels of the slides. I am wondering now if the format is incompatible though they are jpg files or the colour type wrong. The image files are around 1-3 mb each and 72 ppi. I think I will now scan them properly with a scanner to 300dpi anyway to improve quality.
Apple talks about image files not being too big for uploading but gives no sizing of what too big is?
Error message
1. Upload Error. Loss of connection or file corruption during order upload may cause an incomplete order. Resubmitting your order usually resolves this issue.
2. Low Disk Space. If your computer is running on low disk space, your files may be assembled incorrectly. Create more space by deleting unused files.
3. Unreadable PDF file or image files. Files are sometimes assembled incorrectly due to CMYK or Grayscale color space. Use the RGB color space for best results.

SWIM Jobs show failed but all images are in flash

Similar Messages

Maybe you are looking for