Swing app turn to gray after long-time no focus
This has been a headache for me for long time ---
If a Swing application has been idle (minimized or hidden by another application on the screen) for like 20 minutes, then when I maximize or bring the application to the front, the application is unpainted (all in light gray) for a while, then become all clear and re-usable. The less the minimized time, the less the recovering time. It even happens with the well-written JBuilder.
This is really a bad sign for Java application to compete with other Windows native applications. Swing applications I talk about here contains complicated graphical components, like JTable, JEditorPane, JList, custom renderers etc, but not images.
Is there a way to bring application back to work right away?
Thanks a lot!
Hallo Thomas,
we have a similar problem. Reducing the degree of parallel processes helped.
It seems as if the system cannot cope with the amount of 3 parallel processes at some times.
I currently have no better solution. Maybe configuration of maximum number of processes in the system can help.
Currently I have the same problem, but it did to work that way.
DTP hangs in a yellow state during load into DSO with yellow message like "Message missing: End transformation".
I reactivated the DSO, transformation etc. but still no success.
Regards
Thomas
Similar Messages
-
after long time i open my iapd,but i canot open,ipad is desactivate,now i can open
I am trying to help you but I want to be sure I understand what is going on. I think that you can't "open" the iPad because you have to enter the PIN for your sim card according to this taken from the web site that I referred you to. If you cannot remember your PIN you will have to contact your carrier for a replacement SIM card.
COPIED FROM THE WEB SITE....
Summary
You can lock your SIM card so that it can’t be used without a Personal Identification Number (PIN). You must enter the PIN each time you turn iPhone or iPad Wi-Fi + 3G off and turn it back on again.
Products Affected
iPhone, iPad, iPhone Activation in iTunes
Note: This information applies only to devices that use a SIM card.
You can enable, disable, or change your SIM PIN in the following locations:
iPhone: Settings > Phone > SIM PIN
iPad Wi-Fi + 3G: Settings > Cellular Data > SIM PIN
Note: Some carriers provide SIM cards with a default SIM PIN already enabled. Contact your carrier to find out what your default SIM PIN code is.
Personal Unlocking Key (PUK)
If you enter the PIN incorrectly three times, you may need to enter a Personal Unlocking Key (PUK) to enable your SIM card again. Refer to the SIM card documentation or contact your carrier.
Note: Entering an incorrect PUK code too many times will result in the SIM becoming permanently locked. If this occurs, you will need to contact your carrier for a replacement SIM card. -
I just bought the Ipad and even the apps that I have deleted long time ago keep showing in purchased list even though most of them are free.Its realy annoying to not be able to delete them .Is there a way to delete them or is Apple workign on fixing this problem?
If you want to delete an app forever.
1st delete the app on your iPad and on any other iOS devices.
2nd delete the app from iTunes on your PC. -
File upload abort after long time
Hi,
I am trying to upload big files to individual table with BLOB column. During upload process after long time approx. 2h I get the following error message:
[#|2012-08-01T19:03:01.667+0200|WARNING|sun-appserver2.1|java.lang.Class|_ThreadID=27;_ThreadName=httpSSLWorkerThread-8082-2;_Reques
tID=4cec5fc8-b9e1-4017-a859-8759ec1f5d37;|oracle.jdbc.driver.OracleBlobOutputStream.flushBuffer(OracleBlobOutputStream.java:236)
java.io.IOException: ORA-01013: user requested cancel of current operation
at oracle.jdbc.driver.OracleBlobOutputStream.flushBuffer(OracleBlobOutputStream.java:236)
at oracle.jdbc.driver.OracleBlobOutputStream.write(OracleBlobOutputStream.java:151)
at java.nio.channels.Channels$WritableByteChannelImpl.write(Channels.java:296)
at oracle.dbtools.apex.utilities.StreamCopy.drain(StreamCopy.java:43)
at oracle.dbtools.apex.utilities.StreamCopy.drain(StreamCopy.java:30)
at oracle.dbtools.apex.hooks.fileUpload.ApexFileLoader.getBlob(ApexFileLoader.java:207)
at oracle.dbtools.apex.hooks.fileUpload.ApexFileLoader.processApexFileUtil(ApexFileLoader.java:167)
at oracle.dbtools.apex.hooks.fileUpload.ApexFileLoader.processFile(ApexFileLoader.java:55)
at oracle.dbtools.apex.hooks.ProcessorRegistry.fileUploadPreProcess(ProcessorRegistry.java:94)
at oracle.dbtools.apex.FileUpload.loadFiles(FileUpload.java:52)
at oracle.dbtools.apex.ModApex.doPost(ModApex.java:121)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:754)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
at oracle.dbtools.rt.web.HttpEndpointBase.defaultServlet(HttpEndpointBase.java:133)
at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:90)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:427)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:315)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:287)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:218)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:94)
at com.sun.enterprise.web.PESessionLockingStandardPipeline.invoke(PESessionLockingStandardPipeline.java:98)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:222)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:587)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1093)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:166)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:587)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1093)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:291)
at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:666)
at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:597)
at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTask.java:872)
at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultReadTask.java:341)
at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:263)
at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:214)
at com.sun.enterprise.web.portunif.PortUnificationPipeline$PUTask.doTask(PortUnificationPipeline.java:382)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:264)
at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
Caused by: java.sql.SQLTimeoutException: ORA-01013: user requested cancel of current operation
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:440)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:389)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:382)
at oracle.jdbc.driver.T4C8TTILob.processError(T4C8TTILob.java:789)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:445)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:191)
at oracle.jdbc.driver.T4C8TTILob.write(T4C8TTILob.java:178)
at oracle.jdbc.driver.T4CConnection.putBytes(T4CConnection.java:2412)
at oracle.sql.BLOB.setBytes(BLOB.java:881)
at oracle.jdbc.driver.OracleBlobOutputStream.flushBuffer(OracleBlobOutputStream.java:228)
... 43 more
|#]
[#|2012-08-01T19:03:01.743+0200|WARNING|sun-appserver2.1|javax.enterprise.system.stream.err|_ThreadID=27;_ThreadName=httpSSLWorkerTh
read-8082-2;_RequestID=4cec5fc8-b9e1-4017-a859-8759ec1f5d37;|
init: # headers=47
declare nm owa.vc_arr := ?;
vl owa.vc_arr := ?;
begin
owa.init_cgi_env( ?, nm, vl );
htp.init; htp.HTBUF_LEN := 63;
? := sys_context('USERENV','SID');
end;
INIT FAILED:The connection is closed: The connection is closed|#]
[#|2012-08-01T19:03:01.743+0200|WARNING|sun-appserver2.1|javax.enterprise.system.stream.err|_ThreadID=27;_ThreadName=httpSSLWorkerTh
read-8082-2;_RequestID=4cec5fc8-b9e1-4017-a859-8759ec1f5d37;|
nm(1) := 'accept';
vl(1) := 'text/html, application/xhtml+xml, */*';
nm(2) := 'referer';
vl(2) := 'http://degtlun1118.server.arvato-systems.de:8082/apex/f?p=108:19:151527714221001::NO';
nm(3) := 'accept-language';
vl(3) := 'de-DE';
nm(4) := 'user-agent';
vl(4) := 'Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)';
nm(5) := 'content-type';
vl(5) := 'multipart/form-data; boundary=---------------------------7dc10a1f5001c';
nm(6) := 'accept-encoding';
vl(6) := 'gzip, deflate';
nm(7) := 'host';
vl(7) := 'degtlun1118.server.arvato-systems.de:8082';
nm(8) := 'content-length';
vl(8) := '1002208860';
nm(9) := 'connection';
vl(9) := 'Keep-Alive';
nm(10) := 'cache-control';
vl(10) := 'no-cache';
nm(11) := 'cookie';
vl(11) := 'WWV_CUSTOM-F_3062908104789135_108=0B847723FCDB7B7246A26318ACA79A41; LOGIN_USERNAME_COOKIE=scaub01; ORA_WWV_REMEMBER_UN=SC
AUB01:rzsam_irlacc; ORA_WWV_USER_63105666364946=4D6F39F871BFB3EBFBA81249BBC0BF0B';
nm(12) := 'APEX_LISTENER_VERSION';
vl(12) := '1.1.3.243.11.40';
nm(13) := 'DAD_NAME';
vl(13) := '';
nm(14) := 'DOC_ACCESS_PATH';
vl(14) := '';
nm(15) := 'DOCUMENT_TABLE';
vl(15) := '';
nm(16) := 'GATEWAY_IVERSION';
vl(16) := '3';
nm(17) := 'GATEWAY_INTERFACE';
vl(17) := 'CGI/1.1';
nm(18) := 'HTTP_ACCEPT';
vl(18) := 'text/html, application/xhtml+xml, */*';
nm(19) := 'HTTP_ACCEPT_ENCODING';
vl(19) := 'gzip, deflate';
nm(20) := 'HTTP_ACCEPT_LANGUAGE';
vl(20) := 'de-DE';
nm(21) := 'HTTP_ACCEPT_CHARSET';
vl(21) := 'null';
nm(22) := 'HTTP_COOKIE';
vl(22) := 'WWV_CUSTOM-F_3062908104789135_108=0B847723FCDB7B7246A26318ACA79A41; LOGIN_USERNAME_COOKIE=scaub01; ORA_WWV_REMEMBER_UN=SC
AUB01:rzsam_irlacc; ORA_WWV_USER_63105666364946=4D6F39F871BFB3EBFBA81249BBC0BF0B';
nm(23) := 'HTTP_IF_MODIFIED_SINCE';
vl(23) := 'null';
nm(24) := 'HTTP_IF_NONE_MATCH';
vl(24) := 'null';
nm(25) := 'HTTP_HOST';
vl(25) := 'degtlun1118.server.arvato-systems.de:8082';
nm(26) := 'HTTP_ORACLE_ECID';
vl(26) := '';
nm(27) := 'HTTP_PORT';
vl(27) := '8082';
nm(28) := 'HTTP_REFERER';
vl(28) := 'http://degtlun1118.server.arvato-systems.de:8082/apex/f?p=108:19:151527714221001::NO';
nm(29) := 'HTTP_USER_AGENT';
vl(29) := 'Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)';
nm(30) := 'PATH_ALIAS';
vl(30) := ' ';
nm(31) := 'PATH_INFO';
vl(31) := '/wwv_flow.accept';
nm(32) := 'PLSQL_GATEWAY';
vl(32) := 'WebDb';
nm(33) := 'QUERY_STRING';
vl(33) := 'null';
nm(34) := 'REMOTE_ADDR';
vl(34) := '162.49.176.225';
nm(35) := 'REMOTE_USER';
vl(35) := 'APEX_PUBLIC_USER';
nm(36) := 'REQUEST_CHARSET';
vl(36) := 'AL32UTF8';
nm(37) := 'REQUEST_IANA_CHARSET';
vl(37) := 'UTF-8';
nm(38) := 'REQUEST_METHOD';
vl(38) := 'POST';
nm(39) := 'REQUEST_PROTOCOL';
vl(39) := 'http';
nm(40) := 'REQUEST_SCHEME';
vl(40) := 'http';
nm(41) := 'SCRIPT_NAME';
vl(41) := '/apex';
nm(42) := 'SCRIPT_PREFIX';
vl(42) := '';
nm(43) := 'SERVER_NAME';
vl(43) := 'degtlun1118.server.arvato-systems.de';
nm(44) := 'SERVER_PORT';
vl(44) := '8082';
nm(45) := 'SERVER_PROTOCOL';
vl(45) := 'HTTP/1.1';
nm(46) := 'SERVER_SOFTWARE';
vl(46) := 'Mod-Apex';
nm(47) := 'WEB_AUTHENT_PREFIX';
vl(47) := ' ';
|#]
[#|2012-08-01T19:03:01.744+0200|WARNING|sun-appserver2.1|javax.enterprise.system.stream.err|_ThreadID=27;_ThreadName=httpSSLWorkerTh
read-8082-2;_RequestID=4cec5fc8-b9e1-4017-a859-8759ec1f5d37;|
The connection is closed: The connection is closed|#]
[#|2012-08-01T19:03:01.744+0200|WARNING|sun-appserver2.1|javax.enterprise.system.stream.err|_ThreadID=27;_ThreadName=httpSSLWorkerTh
read-8082-2;_RequestID=4cec5fc8-b9e1-4017-a859-8759ec1f5d37;|
The connection is closed: The connection is closed|#]
I am using Glassfish Server v2.1.1 with APEX Listener v1.1.3.243.11.40
The Timeout parameters for JDBC settings in APEX Listener are default. Thus I would expect to abort earlier to be an issue of JDBC Connection?
Anybody an idea?
Thanks!Appears to be a question for the {forum:id=858} forum.
-
APEX File upload abort after long time
Hi,
I am trying to upload big files to individual table with BLOB column. During upload process after long time approx. 2h I get the following error message:
[#|2012-08-01T19:03:01.667+0200|WARNING|sun-appserver2.1|java.lang.Class|_ThreadID=27;_ThreadName=httpSSLWorkerThread-8082-2;_Reques
tID=4cec5fc8-b9e1-4017-a859-8759ec1f5d37;|oracle.jdbc.driver.OracleBlobOutputStream.flushBuffer(OracleBlobOutputStream.java:236)
java.io.IOException: ORA-01013: user requested cancel of current operation
at oracle.jdbc.driver.OracleBlobOutputStream.flushBuffer(OracleBlobOutputStream.java:236)
at oracle.jdbc.driver.OracleBlobOutputStream.write(OracleBlobOutputStream.java:151)
at java.nio.channels.Channels$WritableByteChannelImpl.write(Channels.java:296)
at oracle.dbtools.apex.utilities.StreamCopy.drain(StreamCopy.java:43)
at oracle.dbtools.apex.utilities.StreamCopy.drain(StreamCopy.java:30)
at oracle.dbtools.apex.hooks.fileUpload.ApexFileLoader.getBlob(ApexFileLoader.java:207)
at oracle.dbtools.apex.hooks.fileUpload.ApexFileLoader.processApexFileUtil(ApexFileLoader.java:167)
at oracle.dbtools.apex.hooks.fileUpload.ApexFileLoader.processFile(ApexFileLoader.java:55)
at oracle.dbtools.apex.hooks.ProcessorRegistry.fileUploadPreProcess(ProcessorRegistry.java:94)
at oracle.dbtools.apex.FileUpload.loadFiles(FileUpload.java:52)
at oracle.dbtools.apex.ModApex.doPost(ModApex.java:121)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:754)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
at oracle.dbtools.rt.web.HttpEndpointBase.defaultServlet(HttpEndpointBase.java:133)
at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:90)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:427)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:315)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:287)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:218)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:94)
at com.sun.enterprise.web.PESessionLockingStandardPipeline.invoke(PESessionLockingStandardPipeline.java:98)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:222)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:587)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1093)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:166)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:587)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1093)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:291)
at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:666)
at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:597)
at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTask.java:872)
at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultReadTask.java:341)
at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:263)
at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.doTask(DefaultReadTask.java:214)
at com.sun.enterprise.web.portunif.PortUnificationPipeline$PUTask.doTask(PortUnificationPipeline.java:382)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:264)
at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
Caused by: java.sql.SQLTimeoutException: ORA-01013: user requested cancel of current operation
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:440)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:389)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:382)
at oracle.jdbc.driver.T4C8TTILob.processError(T4C8TTILob.java:789)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:445)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:191)
at oracle.jdbc.driver.T4C8TTILob.write(T4C8TTILob.java:178)
at oracle.jdbc.driver.T4CConnection.putBytes(T4CConnection.java:2412)
at oracle.sql.BLOB.setBytes(BLOB.java:881)
at oracle.jdbc.driver.OracleBlobOutputStream.flushBuffer(OracleBlobOutputStream.java:228)
... 43 more
2012-08-01T19:03:01.743+0200 WARNING sun-appserver2.1 javax.enterprise.system.stream.err ThreadID=27;ThreadName=httpSSLWorkerTh
read-8082-2;_RequestID=4cec5fc8-b9e1-4017-a859-8759ec1f5d37;
init: # headers=47
declare nm owa.vc_arr := ?;
vl owa.vc_arr := ?;
begin
owa.init_cgi_env( ?, nm, vl );
htp.init; htp.HTBUF_LEN := 63;
? := sys_context('USERENV','SID');
end;
INIT FAILED:The connection is closed: The connection is closed|#]
[#|2012-08-01T19:03:01.743+0200|WARNING|sun-appserver2.1|javax.enterprise.system.stream.err|_ThreadID=27;_ThreadName=httpSSLWorkerTh
read-8082-2;_RequestID=4cec5fc8-b9e1-4017-a859-8759ec1f5d37;|
nm(1) := 'accept';
vl(1) := 'text/html, application/xhtml+xml, */*';
nm(2) := 'referer';
vl(2) := 'http://degtlun1118.server.arvato-systems.de:8082/apex/f?p=108:19:151527714221001::NO';
nm(3) := 'accept-language';
vl(3) := 'de-DE';
nm(4) := 'user-agent';
vl(4) := 'Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)';
nm(5) := 'content-type';
vl(5) := 'multipart/form-data; boundary=---------------------------7dc10a1f5001c';
nm(6) := 'accept-encoding';
vl(6) := 'gzip, deflate';
nm(7) := 'host';
vl(7) := 'degtlun1118.server.arvato-systems.de:8082';
nm(8) := 'content-length';
vl(8) := '1002208860';
nm(9) := 'connection';
vl(9) := 'Keep-Alive';
nm(10) := 'cache-control';
vl(10) := 'no-cache';
nm(11) := 'cookie';
vl(11) := 'WWV_CUSTOM-F_3062908104789135_108=0B847723FCDB7B7246A26318ACA79A41; LOGIN_USERNAME_COOKIE=scaub01; ORA_WWV_REMEMBER_UN=SC
AUB01:rzsam_irlacc; ORA_WWV_USER_63105666364946=4D6F39F871BFB3EBFBA81249BBC0BF0B';
nm(12) := 'APEX_LISTENER_VERSION';
vl(12) := '1.1.3.243.11.40';
nm(13) := 'DAD_NAME';
vl(13) := '';
nm(14) := 'DOC_ACCESS_PATH';
vl(14) := '';
nm(15) := 'DOCUMENT_TABLE';
vl(15) := '';
nm(16) := 'GATEWAY_IVERSION';
vl(16) := '3';
nm(17) := 'GATEWAY_INTERFACE';
vl(17) := 'CGI/1.1';
nm(18) := 'HTTP_ACCEPT';
vl(18) := 'text/html, application/xhtml+xml, */*';
nm(19) := 'HTTP_ACCEPT_ENCODING';
vl(19) := 'gzip, deflate';
nm(20) := 'HTTP_ACCEPT_LANGUAGE';
vl(20) := 'de-DE';
nm(21) := 'HTTP_ACCEPT_CHARSET';
vl(21) := 'null';
nm(22) := 'HTTP_COOKIE';
vl(22) := 'WWV_CUSTOM-F_3062908104789135_108=0B847723FCDB7B7246A26318ACA79A41; LOGIN_USERNAME_COOKIE=scaub01; ORA_WWV_REMEMBER_UN=SC
AUB01:rzsam_irlacc; ORA_WWV_USER_63105666364946=4D6F39F871BFB3EBFBA81249BBC0BF0B';
nm(23) := 'HTTP_IF_MODIFIED_SINCE';
vl(23) := 'null';
nm(24) := 'HTTP_IF_NONE_MATCH';
vl(24) := 'null';
nm(25) := 'HTTP_HOST';
vl(25) := 'degtlun1118.server.arvato-systems.de:8082';
nm(26) := 'HTTP_ORACLE_ECID';
vl(26) := '';
nm(27) := 'HTTP_PORT';
vl(27) := '8082';
nm(28) := 'HTTP_REFERER';
vl(28) := 'http://degtlun1118.server.arvato-systems.de:8082/apex/f?p=108:19:151527714221001::NO';
nm(29) := 'HTTP_USER_AGENT';
vl(29) := 'Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)';
nm(30) := 'PATH_ALIAS';
vl(30) := ' ';
nm(31) := 'PATH_INFO';
vl(31) := '/wwv_flow.accept';
nm(32) := 'PLSQL_GATEWAY';
vl(32) := 'WebDb';
nm(33) := 'QUERY_STRING';
vl(33) := 'null';
nm(34) := 'REMOTE_ADDR';
vl(34) := '162.49.176.225';
nm(35) := 'REMOTE_USER';
vl(35) := 'APEX_PUBLIC_USER';
nm(36) := 'REQUEST_CHARSET';
vl(36) := 'AL32UTF8';
nm(37) := 'REQUEST_IANA_CHARSET';
vl(37) := 'UTF-8';
nm(38) := 'REQUEST_METHOD';
vl(38) := 'POST';
nm(39) := 'REQUEST_PROTOCOL';
vl(39) := 'http';
nm(40) := 'REQUEST_SCHEME';
vl(40) := 'http';
nm(41) := 'SCRIPT_NAME';
vl(41) := '/apex';
nm(42) := 'SCRIPT_PREFIX';
vl(42) := '';
nm(43) := 'SERVER_NAME';
vl(43) := 'degtlun1118.server.arvato-systems.de';
nm(44) := 'SERVER_PORT';
vl(44) := '8082';
nm(45) := 'SERVER_PROTOCOL';
vl(45) := 'HTTP/1.1';
nm(46) := 'SERVER_SOFTWARE';
vl(46) := 'Mod-Apex';
nm(47) := 'WEB_AUTHENT_PREFIX';
vl(47) := ' ';
2012-08-01T19:03:01.744+0200 WARNING sun-appserver2.1 javax.enterprise.system.stream.err ThreadID=27;ThreadName=httpSSLWorkerTh
read-8082-2;_RequestID=4cec5fc8-b9e1-4017-a859-8759ec1f5d37;
The connection is closed: The connection is closed|#]
[#|2012-08-01T19:03:01.744+0200|WARNING|sun-appserver2.1|javax.enterprise.system.stream.err|_ThreadID=27;_ThreadName=httpSSLWorkerTh
read-8082-2;_RequestID=4cec5fc8-b9e1-4017-a859-8759ec1f5d37;|
The connection is closed: The connection is closed|#]
I am using Glassfish Server v2.1.1 with APEX Listener v1.1.3.243.11.40
The Timeout parameters for JDBC settings in APEX Listener are default. Thus I would expect to abort earlier to be an issue of JDBC Connection?
Anybody an idea?
Thanks!Appears to be a question for the {forum:id=858} forum.
-
my iphone 4 is not turning on even after long pressing home and sleep/awake button together (about 10-60 sec).
Crap. That's what I was afraid of...Well, since I'm away from home and not near my pc, it sounds like I'm out of luck. The problem is that I need my phone to be at least functional for making and receiving calls. There's an apple store nearby. Perhaps I can go there and have them restore it and at least I'll be able to make and receive calls until I get home and restore from my backup. Does that sound feasible, or am I missing something?
P.s. I tried to click "correct answer" and accidentally hit "helpful". Sorry about that... -
any info would be appreciated, i have tried different things to see if it is a setting that i don't have right, but i just cant get the camera to focus when i want to take a pic. it takes is a long time to focus and it is very frustrating. Babies don't wait for your camera to focus...................lolol.
It definitely shouldn't be that slow, are you using the stock camera? what mode are you using it in? what other settings do you have setup? try downloading another camera like "a better camera" or any other free one and see if it behaves the same. If it does that tells me that either the lens is really dirty or the hardware may have an issue. Make sure the lens is clean then try either a restart or power down and battery pull and see if that solves anything.
-
MX850 won't print after long time idle
After a long time out of action my MX850 won't print at all - I have tried deep cleaning, aligning head and cleaning rollers but still not working...I have a feeling it is the print head and I am expecting to replace all the cartridges but just don't want to have to do it if it may be something else instead as they are pretty expensive...please help.
Hello LARMC, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing idle issues. I would like to help.
I would recommend performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also suggest downloading and running the HP Print and Scan Doctor.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green. -
Imac wont boot after long time without restart
Hi
I've got a two month old new Imac 21,5" with fusion drive 1TB, i had it just before mavericks was launched..
i update to mavericks. All was fine, But i allmost never shut down, or restart the imac.
After some time, I did for a reason i dont remember, had to restart the imac. while booting, it was stuck on the grey screen.. i wasn't able to get it started up, not in safe mode, not after disk repair.. i think i might have tried all the little tricks to get it running again...
luckily i did have a time machine back up...
after installing this back up, everything was fine again..
until 2 weeks later, for some reason i had to reboot again.. and again, it was stuck.. only thing to get the imac working again.. reinstall from time machine back up
after this , it tried rebooting everyday, and the imac kept working..
after a few days, i forgot to reboot for a few days.. and what did you think.. the imac is stuk again.. so while reinstalling the time machine back up. I am writing this. anyone else having this rather strange problem.. if i restart the imac now and then i keeps working.. if i dont after a few days, and i do reboot the imac.. is wont boot anymore..
Any suggestions are welcome
greetingsThe long tone is an indication that a firmware update is installing. Do you get a progress bar at the bottom of you screen after letting the power button go?
Have you reset the PRAM? (cmdalt+PR when you restart the machine)
Also repair permissions when the machine is up and running. -
I have hp3210xi and it just stared to turn itself off after some time, did I do somthing to
hay body, I have hp3210xi all in one and it ws just fine and I had to install the printer on a computer and after I did this the printer just stared to turn itself off after it has ben on for awhile. my system is both win 7 and xp. thanks
vhg.i already rebooted it but it still wont turn back on, it shows me the apple logo, then it fades and it gets bright again intermitently...
-
Error in ODBC after long time connection (MS.SQL Server 2000)
i' using windows XP
and create MS.SQL Server connection through SYSTEM DSN of ODBC DATA SOURCE ADMINISTRATOR in WinXP Control Panel
using jdbc.odbc connection to make connection to database.
it's working, but after many request of data transaction with database.
my program closed it self.
an a error file appear in the path of program.
i don't remember all what the error file contain exactly - it's about ODBC connection ( i already remove the error file long day a go, if i got it again i will post it here)
is java cannot connect database with ODBC properly?
thanks.this is the error:
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x7c901010, pid=2528, tid=3508
# Java VM: Java HotSpot(TM) Client VM (1.4.2_15-b02 mixed mode)
# Problematic frame:
# C [ntdll.dll+0x1010]
--------------- T H R E A D ---------------
Current thread (0x02e64358): JavaThread "ServerBeritaThread" [_thread_in_native, id=3508]
siginfo: ExceptionCode=0xc0000005, reading address 0x00000018
Registers:
EAX=0x00000004, EBX=0x0355f9b4, ECX=0x7ffaf000, EDX=0x00000004
ESP=0x0355f950, EBP=0x0355f968, ESI=0x00000000, EDI=0x039414e8
EIP=0x7c901010, EFLAGS=0x00010297
Top of Stack: (sp=0x0355f950)
0x0355f950: 74355a16 00000004 0394150c 7432139f
0x0355f960: 0394150c 00000000 0355f980 7432a244
0x0355f970: 0394150c 74350000 02e643f4 02e64358
0x0355f980: 0355f994 7432a653 02fbde98 02e643f4
0x0355f990: 143aff08 0355f9ac 03711157 039414e8
0x0355f9a0: 0355f9b4 02e64358 143aff50 0355f9e4
0x0355f9b0: 00a881a6 00000000 0355fa00 039414e8
0x0355f9c0: 00000000 0355f9f4 0355f9c8 00000000
Instructions: (pc=0x7c901010)
0x7c901000: 90 90 90 90 90 64 8b 0d 18 00 00 00 8b 54 24 04
0x7c901010: 83 7a 14 00 75 4f f0 ff 42 04 75 19 8b 41 24 89
Stack: [0x03520000,0x03560000), sp=0x0355f950, free space=254k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [ntdll.dll+0x1010]
C [ODBC32.dll+0xa244]
C [ODBC32.dll+0xa653]
C [JdbcOdbc.dll+0x1157]
j sun.jdbc.odbc.JdbcOdbc.allocConnect(J[B)J+0
j sun.jdbc.odbc.JdbcOdbc.SQLAllocConnect(J)J+30
j sun.jdbc.odbc.JdbcOdbcDriver.allocConnection(J)J+6
j sun.jdbc.odbc.JdbcOdbcConnection.initialize(Ljava/lang/String;Ljava/util/Properties;I)V+37
j sun.jdbc.odbc.JdbcOdbcDriver.connect(Ljava/lang/String;Ljava/util/Properties;)Ljava/sql/Connection;+129
j java.sql.DriverManager.getConnection(Ljava/lang/String;Ljava/util/Properties;Ljava/lang/ClassLoader;)Ljava/sql/Connection;+154
j java.sql.DriverManager.getConnection(Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)Ljava/sql/Connection;+41
j Prosesor.processInput(Ljava/lang/String;)Ljava/lang/String;+51
j ServerBeritaThread.run()V+35
v ~StubRoutines::call_stub
V [jvm.dll+0x752e6]
V [jvm.dll+0xaf627]
V [jvm.dll+0x751f3]
V [jvm.dll+0x74eef]
V [jvm.dll+0x74f28]
V [jvm.dll+0x8ce4f]
V [jvm.dll+0xd3b07]
V [jvm.dll+0xd3ad5]
C [MSVCRT.dll+0x2a3b0]
C [kernel32.dll+0xb50b]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j sun.jdbc.odbc.JdbcOdbc.allocConnect(J[B)J+0
j sun.jdbc.odbc.JdbcOdbc.SQLAllocConnect(J)J+30
j sun.jdbc.odbc.JdbcOdbcDriver.allocConnection(J)J+6
j sun.jdbc.odbc.JdbcOdbcConnection.initialize(Ljava/lang/String;Ljava/util/Properties;I)V+37
j sun.jdbc.odbc.JdbcOdbcDriver.connect(Ljava/lang/String;Ljava/util/Properties;)Ljava/sql/Connection;+129
j java.sql.DriverManager.getConnection(Ljava/lang/String;Ljava/util/Properties;Ljava/lang/ClassLoader;)Ljava/sql/Connection;+154
j java.sql.DriverManager.getConnection(Ljava/lang/String;Ljava/lang/String;Ljava/lang/String;)Ljava/sql/Connection;+41
j Prosesor.processInput(Ljava/lang/String;)Ljava/lang/String;+51
j ServerBeritaThread.run()V+35
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
=>0x02e64358 JavaThread "ServerBeritaThread" [_thread_in_native, id=3508]
0x02facf38 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=1048]
0x02fadc20 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=2028]
0x02e61db0 JavaThread "AWT-Windows" daemon [_thread_in_native, id=728]
0x02e20e48 JavaThread "AWT-Shutdown" [_thread_blocked, id=4056]
0x009d03c0 JavaThread "CompilerThread0" daemon [_thread_blocked, id=1568]
0x009cf630 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=1572]
0x009ccba0 JavaThread "Finalizer" daemon [_thread_blocked, id=2580]
0x009cb818 JavaThread "Reference Handler" daemon [_thread_blocked, id=980]
0x00035aa8 JavaThread "main" [_thread_in_native, id=1684]
Other Threads:
0x00a0b6c0 VMThread [id=1256]
0x00a0cab8 WatcherThread [id=2276]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation total 576K, used 43K [0x10010000, 0x100b0000, 0x104f0000)
eden space 512K, 1% used [0x10010000, 0x10012448, 0x10090000)
from space 64K, 53% used [0x10090000, 0x10098930, 0x100a0000)
to space 64K, 0% used [0x100a0000, 0x100a0000, 0x100b0000)
tenured generation total 1408K, used 665K [0x104f0000, 0x10650000, 0x14010000)
the space 1408K, 47% used [0x104f0000, 0x105967e8, 0x10596800, 0x10650000)
compacting perm gen total 4096K, used 4065K [0x14010000, 0x14410000, 0x18010000)
the space 4096K, 99% used [0x14010000, 0x14408580, 0x14408600, 0x14410000)
Dynamic libraries:
0x00400000 - 0x0040b000 C:\java\bin\java.exe
0x7c900000 - 0x7c9b0000 C:\WINDOWS\system32\ntdll.dll
0x7c800000 - 0x7c8f4000 C:\WINDOWS\system32\kernel32.dll
0x77dd0000 - 0x77e6b000 C:\WINDOWS\system32\ADVAPI32.dll
0x77e70000 - 0x77f01000 C:\WINDOWS\system32\RPCRT4.dll
0x77c10000 - 0x77c68000 C:\WINDOWS\system32\MSVCRT.dll
0x08000000 - 0x08144000 C:\java\jre\bin\client\jvm.dll
0x77d40000 - 0x77dd0000 C:\WINDOWS\system32\USER32.dll
0x77f10000 - 0x77f56000 C:\WINDOWS\system32\GDI32.dll
0x76b40000 - 0x76b6d000 C:\WINDOWS\system32\WINMM.dll
0x10000000 - 0x10007000 C:\java\jre\bin\hpi.dll
0x76bf0000 - 0x76bfb000 C:\WINDOWS\system32\PSAPI.DLL
0x00390000 - 0x0039e000 C:\java\jre\bin\verify.dll
0x003b0000 - 0x003c9000 C:\java\jre\bin\java.dll
0x003d0000 - 0x003de000 C:\java\jre\bin\zip.dll
0x02e70000 - 0x02f84000 C:\java\jre\bin\awt.dll
0x73000000 - 0x73026000 C:\WINDOWS\system32\WINSPOOL.DRV
0x76390000 - 0x763ad000 C:\WINDOWS\system32\IMM32.dll
0x774e0000 - 0x7761c000 C:\WINDOWS\system32\ole32.dll
0x5ad70000 - 0x5ada8000 C:\WINDOWS\system32\uxtheme.dll
0x033e0000 - 0x03432000 C:\java\jre\bin\fontmanager.dll
0x73760000 - 0x737a9000 C:\WINDOWS\system32\ddraw.dll
0x73bc0000 - 0x73bc6000 C:\WINDOWS\system32\DCIMAN32.dll
0x73940000 - 0x73a10000 C:\WINDOWS\system32\D3DIM700.DLL
0x74720000 - 0x7476b000 C:\WINDOWS\system32\MSCTF.dll
0x035e0000 - 0x035ef000 C:\java\jre\bin\net.dll
0x71ab0000 - 0x71ac7000 C:\WINDOWS\system32\WS2_32.dll
0x71aa0000 - 0x71aa8000 C:\WINDOWS\system32\WS2HELP.dll
0x605d0000 - 0x605d9000 C:\WINDOWS\system32\mslbui.dll
0x77120000 - 0x771ac000 C:\WINDOWS\system32\OLEAUT32.DLL
0x20b00000 - 0x20b4b000 C:\WINDOWS\system32\imon.dll
0x71ad0000 - 0x71ad9000 C:\WINDOWS\system32\WSOCK32.dll
0x71a50000 - 0x71a8f000 C:\WINDOWS\system32\mswsock.dll
0x662b0000 - 0x66308000 C:\WINDOWS\system32\hnetcfg.dll
0x71a90000 - 0x71a98000 C:\WINDOWS\System32\wshtcpip.dll
0x03710000 - 0x0371c000 C:\java\jre\bin\JdbcOdbc.dll
0x74320000 - 0x7435d000 C:\WINDOWS\system32\ODBC32.dll
0x5d090000 - 0x5d127000 C:\WINDOWS\system32\COMCTL32.dll
0x7c9c0000 - 0x7d1d4000 C:\WINDOWS\system32\SHELL32.dll
0x77f60000 - 0x77fd6000 C:\WINDOWS\system32\SHLWAPI.dll
0x763b0000 - 0x763f9000 C:\WINDOWS\system32\comdlg32.dll
0x773d0000 - 0x774d2000 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2180_x-ww_a84f1ff9\comctl32.dll
0x20000000 - 0x20017000 C:\WINDOWS\system32\odbcint.dll
0x77c00000 - 0x77c08000 C:\WINDOWS\system32\VERSION.dll
0x77fe0000 - 0x77ff1000 C:\WINDOWS\system32\Secur32.dll
0x5fe80000 - 0x5fe9b000 C:\WINDOWS\system32\odbccp32.dll
0x77c70000 - 0x77c93000 C:\WINDOWS\system32\msv1_0.dll
0x76d60000 - 0x76d79000 C:\WINDOWS\system32\iphlpapi.dll
VM Arguments:
java_command: ServerBerita
Launcher Type: SUN_STANDARD
Environment Variables:
CLASSPATH=.;C:\PROGRA~1\JMF\lib\sound.jar;C:\PROGRA~1\JMF\lib\jmf.jar;C:\PROGRA~1\JMF\lib;.;.;d:\PROGRA~1\JMF21~1.1E\lib\sound.jar;d:\PROGRA~1\JMF21~1.1E\lib\jmf.jar;d:\PROGRA~1\JMF21~1.1E\lib;
PATH=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;c:\java\bin;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft Visual Studio\Common\Tools\WinNT;C:\Program Files\Microsoft Visual Studio\Common\MSDev98\Bin;C:\Program Files\Microsoft Visual Studio\Common\Tools;C:\Program Files\Microsoft Visual Studio\VC98\bin;c:\apache\mysql\bin;;C:\PROGRA~1\COMMON~1\MUVEET~1\030625
USERNAME=acer
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 2, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows XP Build 2600 Service Pack 2
CPU:total 2 family 6, cmov, cx8, fxsr, mmx, sse, sse2
Memory: 4k page, physical 1038440k(478648k free), swap 1712796k(1228644k free)
vm_info: Java HotSpot(TM) Client VM (1.4.2_15-b02) for windows-x86, built on May 22 2007 17:01:47 by "java_re" with MS VC++ 6.0 -
Pb to Stop my application after long time of use!
Hello,
I use LABVIEW 5.01 and I have a problem with the application I made.
This application use a lot of sub VI (Logical I/O, RS232, sequential...).
When this application is running during many hours (More than 1 Day),
it's very long to quit the appication. A white screen appears and the CPU
time
is used at 100% during 2 or 3 minutes.
This problem does not appear if the application is run during a short time.
Did somebody already have this problem?
How to resolve it?
D.BOISSETCraig Graham wrote in message
news:8d4es9$cr6$[email protected]..
>
> > Another possibility is that there are lots of open I/O sessions that are
> not
> > being closed. Again, on exit, LV will release them back to the OS.
These
> > are a bit harder to find/detect, but they can either be closed when you
> are
> > finished with them, or you can open them outside the loop so that fewer
of
> > them are allocated.
>
> Another possibility, if it's Win95/98, is that the memory pool is becoming
> fragmented by frequent allocation/deallocation of large arrays, causing a
> gradual degradation in machine performance over time. If you use large
> arrays in there, it may be better to allocate them beforehand and use
> "replace
array element" rather than allocating on the fly by using "build
> array" or having arrays built at the output of a loop.
>
In system.ini or autoexec.bat you set the the disk cache size to maximum
value. If you dont do this win95 will increase the disk cache size below the
RAM amount.... I had similar problems when trying to collect 200 ksamples/S
on P133 notebook for 20 sec, then it took ten minutes before writing to disk
stopped. You can check the mem useage by runing sysmon.exe.
Anders Björk
Analytical Chemistry
Royal Inst. of Technology
Stockholm
Sweden -
[Solved]Can't load mysql after long time of idle
Phpmyadmin:
#2002 Cannot log in to the MySQL server
/etc/rc.d/mysqld restart
:: Stopping MySQL Server [FAIL]
:: Starting MySQL Server [FAIL]
Did everything in archwiki.
Webmin used to write:
SQL select * from tables_priv order by table_name failed : Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
Where can i find log file? There in no one in /var/log/
cat /var/lib/mysql/myhost.err
110306 18:53:22 mysqld_safe mysqld from pid file /var/lib/mysql/myhost.pid ended
110306 18:53:25 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql
/usr/bin/mysqld: Table 'mysql.plugin' doesn't exist
110306 18:53:25 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it.
110306 18:53:25 InnoDB: The InnoDB memory heap is disabled
110306 18:53:25 InnoDB: Mutexes and rw_locks use GCC atomic builtins
110306 18:53:25 InnoDB: Compressed tables use zlib 1.2.5
110306 18:53:25 InnoDB: Initializing buffer pool, size = 128.0M
110306 18:53:25 InnoDB: Completed initialization of buffer pool
110306 18:53:25 InnoDB: highest supported file format is Barracuda.
110306 18:53:25 InnoDB: Waiting for the background threads to start
110306 18:53:26 InnoDB: 1.1.5 started; log sequence number 1589359
110306 18:53:26 [ERROR] Fatal error: Can't open and lock privilege tables: Table 'mysql.host' doesn't exist
110306 18:53:26 mysqld_safe mysqld from pid file /var/lib/mysql/myhost.pid ended
110306 18:54:26 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql
110306 18:54:26 InnoDB: The InnoDB memory heap is disabled
110306 18:54:26 InnoDB: Mutexes and rw_locks use GCC atomic builtins
110306 18:54:26 InnoDB: Compressed tables use zlib 1.2.5
110306 18:54:26 InnoDB: Initializing buffer pool, size = 128.0M
110306 18:54:26 InnoDB: Completed initialization of buffer pool
110306 18:54:26 InnoDB: highest supported file format is Barracuda.
110306 18:54:26 InnoDB: Waiting for the background threads to start
110306 18:54:27 InnoDB: 1.1.5 started; log sequence number 1589359
110306 18:54:27 [Note] Recovering after a crash using mysql-bin
110306 18:54:27 [Note] Starting crash recovery...
110306 18:54:27 [Note] Crash recovery finished.
110306 18:54:27 [Warning] Can't open and lock time zone table: Table 'mysql.time_zone_leap_second' doesn't exist trying to live without them
110306 18:54:27 [ERROR] Can't open and lock privilege tables: Table 'mysql.servers' doesn't exist
110306 18:54:27 [ERROR] Native table 'performance_schema'.'events_waits_current' has the wrong structure
110306 18:54:27 [ERROR] Native table 'performance_schema'.'events_waits_history' has the wrong structure
110306 18:54:27 [ERROR] Native table 'performance_schema'.'events_waits_history_long' has the wrong structure
110306 18:54:27 [ERROR] Native table 'performance_schema'.'setup_consumers' has the wrong structure
110306 18:54:27 [ERROR] Native table 'performance_schema'.'setup_instruments' has the wrong structure
110306 18:54:27 [ERROR] Native table 'performance_schema'.'setup_timers' has the wrong structure
110306 18:54:27 [ERROR] Native table 'performance_schema'.'performance_timers' has the wrong structure
110306 18:54:27 [ERROR] Native table 'performance_schema'.'threads' has the wrong structure
110306 18:54:27 [ERROR] Native table 'performance_schema'.'events_waits_summary_by_thread_by_event_name' has the wrong structure
110306 18:54:27 [ERROR] Native table 'performance_schema'.'events_waits_summary_by_instance' has the wrong structure
110306 18:54:27 [ERROR] Native table 'performance_schema'.'events_waits_summary_global_by_event_name' has the wrong structure
110306 18:54:27 [ERROR] Native table 'performance_schema'.'file_summary_by_event_name' has the wrong structure
110306 18:54:27 [ERROR] Native table 'performance_schema'.'file_summary_by_instance' has the wrong structure
110306 18:54:27 [ERROR] Native table 'performance_schema'.'mutex_instances' has the wrong structure
110306 18:54:27 [ERROR] Native table 'performance_schema'.'rwlock_instances' has the wrong structure
110306 18:54:27 [ERROR] Native table 'performance_schema'.'cond_instances' has the wrong structure
110306 18:54:27 [ERROR] Native table 'performance_schema'.'file_instances' has the wrong structure
110306 18:54:27 [Note] /usr/bin/mysqld: ready for connections.
Version: '5.5.9-log' socket: '/var/run/mysqld/mysqld.sock' port: 0 Source distribution
110306 19:11:24 [Note] /usr/bin/mysqld: Normal shutdown
110306 19:11:26 [Warning] /usr/bin/mysqld: Forcing close of thread 1 user: 'root'
110306 19:11:26 InnoDB: Starting shutdown...
110306 19:11:26 InnoDB: Shutdown completed; log sequence number 1589359
110306 19:11:26 [Note] /usr/bin/mysqld: Shutdown complete
mysql_upgrade
Looking for 'mysql' as: mysql
Looking for 'mysqlcheck' as: mysqlcheck
Running 'mysqlcheck' with connection arguments: '--port=3306' '--socket=/var/run/mysqld/mysqld.sock' '--port=3306' '--socket=/var/run/mysqld/mysqld.sock'
mysqlcheck: Got error: 2002: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) when trying to connect
FATAL ERROR: Upgrade failed
What can I do now, huh?
Thanks in advance!
P.S. How can I delete (not drop) all datebase in /var/lib/mysql ?
Last edited by SkyTod (2011-03-11 09:32:16)cat /var/lib/mysql/myhost.err
110307 19:12:05 mysqld_safe mysqld from pid file /var/lib/mysql/myhost.pid ended
110308 08:55:24 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql
110308 8:55:25 InnoDB: The InnoDB memory heap is disabled
110308 8:55:25 InnoDB: Mutexes and rw_locks use GCC atomic builtins
110308 8:55:25 InnoDB: Compressed tables use zlib 1.2.5
110308 8:55:25 InnoDB: Initializing buffer pool, size = 128.0M
110308 8:55:25 InnoDB: Completed initialization of buffer pool
InnoDB: The first specified data file ./ibdata1 did not exist:
InnoDB: a new database to be created!
110308 8:55:25 InnoDB: Setting file ./ibdata1 size to 10 MB
InnoDB: Database physically writes the file full: wait...
110308 8:55:26 InnoDB: Log file ./ib_logfile0 did not exist: new to be created
InnoDB: Setting log file ./ib_logfile0 size to 5 MB
InnoDB: Database physically writes the file full: wait...
110308 8:55:27 InnoDB: Log file ./ib_logfile1 did not exist: new to be created
InnoDB: Setting log file ./ib_logfile1 size to 5 MB
InnoDB: Database physically writes the file full: wait...
InnoDB: Doublewrite buffer not found: creating new
InnoDB: Doublewrite buffer created
InnoDB: 127 rollback segment(s) active.
InnoDB: Creating foreign key constraint system tables
InnoDB: Foreign key constraint system tables created
110308 8:55:29 InnoDB: Waiting for the background threads to start
110308 8:55:30 InnoDB: 1.1.5 started; log sequence number 0
110308 8:55:32 [Note] Event Scheduler: Loaded 0 events
110308 8:55:32 [Note] /usr/bin/mysqld: ready for connections.
Version: '5.5.9-log' socket: '/var/run/mysqld/mysqld.sock' port: 0 Source distribution
110308 23:46:42 [Note] /usr/bin/mysqld: Normal shutdown
110308 23:46:42 [Note] Event Scheduler: Purging the queue. 0 events
110308 23:46:42 InnoDB: Starting shutdown...
110308 23:46:43 InnoDB: Shutdown completed; log sequence number 1595675
110308 23:46:43 [Note] /usr/bin/mysqld: Shutdown complete
110308 23:46:43 mysqld_safe mysqld from pid file /var/lib/mysql/myhost.pid ended
110309 09:52:34 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql
110309 9:52:35 InnoDB: The InnoDB memory heap is disabled
110309 9:52:35 InnoDB: Mutexes and rw_locks use GCC atomic builtins
110309 9:52:35 InnoDB: Compressed tables use zlib 1.2.5
110309 9:52:35 InnoDB: Initializing buffer pool, size = 128.0M
110309 9:52:35 InnoDB: Completed initialization of buffer pool
110309 9:52:35 InnoDB: highest supported file format is Barracuda.
110309 9:52:36 InnoDB: Waiting for the background threads to start
110309 9:52:37 InnoDB: 1.1.5 started; log sequence number 1595675
110309 9:52:37 [Note] Event Scheduler: Loaded 0 events
110309 9:52:37 [Note] /usr/bin/mysqld: ready for connections.
Version: '5.5.9-log' socket: '/var/run/mysqld/mysqld.sock' port: 0 Source distribution
ls /var/lib/mysql
ibdata1 ib_logfile1 myhost.pid mysql-bin.000001 mysql-bin.000003 mysql-bin.index test
ib_logfile0 myhost.err mysql mysql-bin.000002 mysql-bin.000004 performance_schema -
IPod recognized as 2TB-Volume after long time
Suddenly my iPod G4 20GB showed no more songs and was no longer recognized by my iBook. I found it this morning with my settings all confused (standard settings) and no songs at all.
iPod updater won't restore or update the iPod, although it recognized the iPod after a few minutes. I started the Disk Manager which shows my iPod as 2TB Volume only after 20min. I've tried to erase, but it will show unknown error ("-20"). In diagnostic mode everything seems to be normal, except that the HDD-scan had not finished after 2 hours so I restarted the iPod.
How can I get my iPod back to life? It work fine only yesterday. Can anybody help?!Welcome to Apple Discussions!
Can you restore your iPod with the iPud Updater?
Restore the iPod
Does the iPod show Do Not Disconnect?
btabz -
How do I restore this app ?
Are you sure you are selecting the correct app in the App Store? Some apps have two different versions for the phone and the iPad and if you are looking at an iPhone version of the game, then it would show up as having a cost associated with it since it would be a separate app.
Maybe you are looking for
-
How to show the Library folder in an external hard drive
Hi there, I am trying to restore the Skype Chat History to my new computer. My old hard drive crashed and had to be replaced. Unfortunately my back-up Time Machine file was corrupted due to fact that this is a VERY EASY thing to happen and hence I
-
Can anyone tell me how can I watch any video on Firefox without Adobe Flash Plugin?
OK I don't know but the latest version of flash player really frustrated me. I don't like Chrome been my entire life Firefox user, but I will have to switch over since I can't stand adobe flash plugin. I uninstalled it and after reboot Firefox automa
-
Problem in IP10 with the date of the task list
Hello all!!!!! I have a problem when I'm duplicating a task list. I can duplicate the task list correctly, then i assign it to a generated maintance plan ( I'm only changing the plnal field because i'm changing the center of the task list). Then I go
-
Understanding the technical term
hi i queried the dba_mviews and under the staleness attribute i have got unusable and stale. can anyone help me in understanding wat the stale and unusable mean??
-
Setting Crystal report description.
When adding a Crystal report to CMC, there is an check box "Use description from report " to display the report description. Once I select this and add a report to CMC, is there away to remove this and add my own description?