Swipe down/up for notification and controle center stop working

Hi guys,
I got today my new IPhone 6+ running iOS 8.0.2 and after a while the swipe up gesture for the control center and also the swipe down gesture for the notification center stops working on the home screen and in apps.
On the lockscreen the gestures still working.
It happend now 3 Times today but I can´t see any System behind this.
And it happens also that the System freezes some times for a few seconds, I saw it happen In safari and mail app.
Hope these are only bugs in iOS which will be solved soon.

Hello Eric Grylls,
Thanks for contributing to the Apple Support Communities.
If you're not able to access Notification Center or Control Center (other than using Assistive Touch) on your iPhone 5s since the latest update, I recommend following these troubleshooting steps mentioned in this article:
iOS: Not responding or does not turn on - Apple Support
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
All the best,
Jeremy

Similar Messages

  • Why did the Notification Center and Control Center stop working?

    After updating ios 8, Notification and Control Centers stop working from time to time. I can't swipe up or down. I have to use the Assistive Touch to bring them on screen. Restarting the iPhone make them usable again. But afyet a while, it happened again.
    Now, iOS 8.1.2. Last update, the Centers used to appear again. But 8.1.2, they just stopped working.
    How how can I fix it?

    Hello Eric Grylls,
    Thanks for contributing to the Apple Support Communities.
    If you're not able to access Notification Center or Control Center (other than using Assistive Touch) on your iPhone 5s since the latest update, I recommend following these troubleshooting steps mentioned in this article:
    iOS: Not responding or does not turn on - Apple Support
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    All the best,
    Jeremy

  • Notification and Control Center does not show

    Hi,
    Sometimes (I don't know exactly under which circumstances) on my iPhone 4 (iOS 7.0.2), Notification and Control Center won't appear with swipe gestrue.
    In this situation, When iPhone is locked and a notification (like message or phone call) arrives, the screen ALWAYS shows that notification and the screen is always on, until I arraive and lock it manually !! The second one is a serious problem beacuse after some hours the battery drops dramatically.
    ONLY a reboot solves this probelm.
    Is there any solution to this topic rather than reboot?

    Same problem! I have a 4 though so maybe that's the problem? What iphone do you have?

  • After updating to iOS 8 notification and control center won't open when unlocked

    Ever since I updated my iPhone 5s to iOS 8, the notification and control center will not open while my phone is unlocked. I checked to see if I had it disabled in settings and it turns out I did not. I switched the Access Within Apps as well as the Access While Locked on and off anyway but still nothing. I can only pull the notification and control center open while my phone is locked... it is extremely annoying. I know I'm not the only one though because my friend who updated to iOS 8 on his 5c was having the exact same problems. Some help would be much appreciated. Thank you!

    So yesterday vibration suddenly started working again, after nearly two weeks with the problem above. I have no idea why, I didn't change any settings and the only app that was updated yesterday was Facebook messenger...

  • Catalyst control center stopped working

    HP Pavilion HPE h8-1287c
    Video card Radeon HD 7450
    Windows 7 64-bit
    Error message "Catalyst Control Center stopped working......."
    Two monitors connected, HPw2408h and TV. HP monitor is connected using DVI and the TV using HDMI.
    The issue is that when the pc starts things run fine. WhenI want to have the sound to the TV I switch the Sound Playback to AMD HDMI Output and the TV now has the sound. After a while I will get an error message "Catalyst Control Center stopped working.......". When Sound Playback is opened the AMD HDMI Output is no longer working and has a red arrow pointing down and it indicates the AMD HDMI Output is "not plugged in".
    I have download the latest drivers and still have the same results.
    What is needed to correct the issue? 

    Hello insco6750,
    When you updated the drivers did you install over top of existing software or uninstall beforehand?
    First we should try ripping everything ATI off of the system, including software, drivers and CCC. You should be able to uninstall everything through Add/remove programs.
    After you remove everything reboot and let windows reinstall it's own drivers and software. You don't need CCC to do dual monitors so we can do testing without it.
    Once you let windows install see if your HDMI output no longer works when you switch to the TV.
    Post back your results after completing this.
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

  • My iPhone 4 fell down on my bed and not starting (stopped working)

    My iPhone 4 fell down on my bed and not starting (stopped working)

    Thank you RAZMEE209, i tried in the same way but could not worked out, than i put on Charging. Automatically asekd me to connect to iTunes and than restored all new software. thnx again

  • Swipe for Notification Center and Control Center not working after using Window Zoom

    I'm using iOS 8.0.2 on an iPhone 6 and have noticed that after using the Window Zoom (Accessibility feature 3-finger double-tap), I cannot swipe down for Notification Center nor swipe up for Control Center when unlocked (i.e. in Home screen or within an app screen). However, when the iPhone is locked, the swipe down for Notification Center and swipe up for Control Center is okay. It just doesn't work when unlocked. And the only way to rectify the problem is to reboot the phone.
    Has anyone else experienced this?

    I have figured out the solution to all of our problems!!! We can keep the zoom function ON!!!! Yay!
    Step one. Turn back on the beloved zoom function.
    step two. Tap screen with 3 fingers.
    step three. Select window zoom. (If already selected move on to step Quatro)
    step qautro. Select Resize lens.
    and for the moment you've all be waiting for... Drum roll..
    the grand finale step. IS...
    shrink the window to the smallest size.
    AFter you have done these 5 steps, you can thoroughly enjoy having all three functions at once. If you switch back to Full Screen Zoom (if that be your preference) the notification and control centers will remain functional! Bon apetit!
    i have been successful enlarging the window while keeping the centers functioning by making sure the window is in the shape of a square.
    -ChrisCasti

  • Notification center and control center only work from lock screen on my iPhone 6

    When I try to swipe down to get notification center or up to get control center from any screen but my lock screen, I can't.  Is there a setting or something that I need to change?

    That is correct. Are you starting from off the screen area itself? You cannot start from on the screen. You need to be just off of the screen to begin. See if that helps. If not, then do a reset on the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. Check operation after that.

  • Voicemail notifications and visual voicemail stopped working

    On September 17th (a few days ago) my phone stopped giving me voicemail notifications and visual voicemail. I have tried restarting my phone, resetting, resetting "all settings" and even calling 611 (I was put on hold for 15 minutes and just gave up thats AT&T service for you).
    The all other notifications like recent calls and mail work just fine. I can retrieve my messages by calling my own phone number. How do I get my voicemail notifications and visual voicemail to work again?
    Thank you for your help.

    I found a solution. http://discussions.apple.com/message.jspa?messageID=10213066#10213066
    "Keveon - to fix your visual voicemail after doing tthe 3.1 update. go to Settings > General > Profile > then remove the BENM.at Call your phone, leave a voicemail and it will work!!!!!! Hope this helps"

  • Notification and Control centers not working

    Hello. I have a problem with Control Center and Notification Center in iOS 7 with my new iPad mini. For some reason, they do not show up when I swipe to call them. I have checked in the settings and they are enabled, so I really don't know what's wrong. Any help would be appreciated.
    Thanks,
    George

    Try reset iPad and try again.
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Catalyst Control Center stopped working properly after widows update

    When I let Windows Update install the newest catalyst control center driver I could not open catalyst control center so I tried to do a system restore but it failed because It said my anti virus was preventing this with the error code 0x80070005.I first tried to disable the anti virus shields and restore didnt work. Then I uninstalled the anti virus and went to safe mode but it gave my the same error. Now Catalyst Control Center opens but the only feature available is HydraVision. I still cannot change the picture and graphics settings because they are not there to select in CCC. 

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that your Catalyst Control Center (CCC) program on your desktop computer has stopped working correctly after downloading Windows update drivers for it, and I would be happy to assist you in this matter! To correct this issue, I recommend returning your system back to a previous restore point to before the Windows updates were installed. This can be done by following this resource on Using Microsoft System Restore (Windows 7).  Once the restore point has been enabled, you can update your CCC and graphics drivers by following this document on Using HP Support Assistant (Windows 7).  Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards

  • I've been using InDesign for class.  Now it "stops working" when I try to apply text and closes out

    I've been using InDesign for class.  Now I'm trying to do a newsletter for assignment and it keeps "stop working" and closes out the program.

    What Operating System? Is ID patched to version 8.0.2 (the patch was released last week). Do you have a Font Manager?
    Have you tried replacing your preferences? See Replace Your Preferences

  • HT204291 I cannot find the AirPlay icon for the life of me. I have iOS 7.0.2 on my iPad Mini. Connected to my WiFi network just fine. I swipe up to get to the control center badges and all I see is the AirDrop icon. Trying to disable mirroring on ipad for

    I cannot find the AirPlay icon for the life of me. I have iOS 7.0.2 on my iPad Mini. Connected to my WiFi network just fine. I swipe up to get to the control center badges and all I see is the AirDrop icon. Trying to disable mirroring on ipad for Netflix streaming and don't know what to do. Any luck out there?

    If you last used an Apple TV to mirror your device and have updated to the newest Apple TV software, go into settings and turn airplay back on. The icon should then appear on your iPad mini when you swipe up allowing you to disable it for Netflix. After updating my Apple TV software for some reason it turned airplay off.
    Bob G

  • Couldnt slide down/up for notification centre and control centre.

    Since i update to iOS8 for iphone 5.
    Having problem to slide down/up notification centre and control centre.
    too much choices of access in Assistive touch. Choice of notification/control centre is pointless, since ios7 we can slide it down/up.
    why Apple dont have any twitter account for people to share. Seems like theres no PIC to incharge about customers problem.
    Im quite regret upgrading to iOS8.

    I have figured out the solution to all of our problems!!! We can keep the zoom function ON!!!! Yay!
    Step one. Turn back on the beloved zoom function.
    step two. Tap screen with 3 fingers.
    step three. Select window zoom. (If already selected move on to step Quatro)
    step qautro. Select Resize lens.
    and for the moment you've all be waiting for... Drum roll..
    the grand finale step. IS...
    shrink the window to the smallest size.
    AFter you have done these 5 steps, you can thoroughly enjoy having all three functions at once. If you switch back to Full Screen Zoom (if that be your preference) the notification and control centers will remain functional! Bon apetit!
    i have been successful enlarging the window while keeping the centers functioning by making sure the window is in the shape of a square.
    -ChrisCasti

  • HT5858 My notification center and control center are stuck

    My notification center and control center are stuck grey and black even if i change the wallpaper. I restarted my iPod but its still stuck how do i fix this!!

    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.      
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       

Maybe you are looking for

  • Mapping issue with Qualifier table

    Hi, 1. I have an issue after mapping all 3  non-qual flds of a qualifier table in main table getting the compound fld enabled but selecting it , not mapping automatically to the appropiate compound field in the destination side, but giving an error m

  • Fillable forms blank in attachment

    Hi, I have created a fillable PDF form but when I send it as an attachment and open it on my iPhone I cant see the content that I entered into the text boxes. Any ideas?

  • Problem with custom page layout

    Hi, I had created a page layout and deployed it. And created a layout for it in the Portal content. When i am trying to create page i can't able to see my page layout. Here i can only see the default layouts. What should be done to make my page layou

  • Can't Use Safari Any Longer.  Too Unstable......

    I've tried everything.  I've deleted, reloaded, gotten rid of preferences, deleted all extensions, stopped using Flash and all the other suggested "fixes" all to no avail.  Safari continues to to extremely unstable and usually, right in the middle of

  • Help using command promt

    I can run the command promt from the RUN command. I type in javac and it says its reconized. I set the path and classpath. I don't know if its right. I am using XP. When I go to open the javac window from my program files, it comes up and displays a