Swipe left and right with magic mouse doesn't work in safari

Hey there,
I accidently deleted something in the navigation bar in safari.
Now when i swipe left and right with my magic mouse, it doesn't go to the previous pages anymore. But the wierd thing is it still works with my magic trackpad.
And even wierder the swipe left and right of my magic mouse still works in other programs.
So can anyone help me with this?
Thanks in advance!

Check Gestures in System Preferences > Trackpad
It's working here on Safari 7  /  v10.9 Mavericks

Similar Messages

  • Left and right button of mouse doesn't work?Please help

    Seems like I use the keyboard in place of the mouse. The pointer of the mouse is working but the left and right button.

    Check Gestures in System Preferences > Trackpad
    It's working here on Safari 7  /  v10.9 Mavericks

  • Scrolling and rightclicking with magic mouse doesnt  work anymore

    Suddenly scrolling and rightclicking with magic mouse doesnt work any more. Left clicking and cursor moving works normal. I have checked the system preferences for the mouse and find nothing strange or unchecked. Any ideas?

    Also tried the universal access thing. Doesnt work.

  • Can articles swipe left and right?

    Is it possible to have articles swipe left and right instead of just up and down? From what I can see at the moment you swipe up and down in an article (multiple pages of course) and swipe left and right to change articles. I am trying to publish a gardening magazine and it has many 2 page images. When swiping and down they flow poorly.

    Set them to horizontal swipe only in the article properties.
    Bob

  • Magic Charger for the Magic Mouse doesn´t work

    Hi,
    I´ve recently did my first purchase on the apple store,
    I´ve bought the magic charger from mobee for the Magic Mouse,
    which has been working all good with the normal batteries,
    but since I´ve install the new magic charger batteries I just can´t make
    work the magic mouse, I´ve plug the magic charge into a usb from the iMac 24"
    I´ve wait almost a day so tha the Magic Mouse charge the batteries than
    when I switch on the Magic Mouse doesn´t work, the green light from Magic Mouse stands off,
    so obviously the bluetooth from iMac 24" doesn´t recognize Magic Mouse,
    ¿Any suggestion?
    Thank you very much in advance.

    Hi Allan Jones,
    I don´t know under with authority you´ve answered this thread,
    but and don´t get me wrong, your message was completely worthless.
    Since I did a purchase on the apple store, the apple store should answer
    for every inconvenient with the product than I did purchase, and as Apple
    is a big multinational who cares for his customers, they did so Apple store sended
    special transport to my home to get the malfunctional Magic Charger and than
    they send me a new one which seems would work fine.
    Thank you very much in advance.

  • My apple magic mouse doesn't work in windows 7 after installing maverick os x

    My apple magic mouse doesn't work in windows 7 after installing the maverick operating system on my mackbook pro.  How do I fix this problem?

    Hi bsruff,
    If you are having issues with your Magic Mouse in Windows 7 via Boot Camp after upgrading to Mavericks, you may find the following article helpful:
    Apple Support: Resolving issues with Windows when using Apple Magic Mouse or Apple Wireless Keyboard
    http://support.apple.com/kb/TS3092
    Regards,
    - Brenden

  • Body damage and left and right keys of keyboard is not working

    Body damage and left and right keys of keyboard is not working...from where it fix it is possible to change the body and keyboard how much it cost?

    Hello @harmankakkar ,
    Welcome to the HP Forums!
    I understand your notebook has taken on some damage to the chassis and keyboard.
    You can find a full list of parts for the product, and the steps to replace them yourself in the Maintenance and Service guide available in the User Guide section on your products support page here: HP - Drivers & Downloads.
    You will need your exact product or model number to access this information. For information on finding your product and model numbers click here: How Do I Find My Model Number or Product Number?
    Using the part numbers will allow you to search both the HP Part Store and third party vendors (like eBay and Amazon) for the cheapest parts. 
    You may also want to consider contacting HP Phone Support as they can give you an exact quote on costs for repair to your notebook. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.
    Hopefully this information helps!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • HT201322 It doesn't provide me with the option to hide when I swipe left and right nothing changes or happens

    When I try to hide something from my App Store purchased list i found out form this to swipe left or right and it should provide me with the option to hide the item but it doesn't and it's annoying me seriously. I deleted the application for a **** good reason someone please help me or tell me what to do

    It doesn't appear to work on iOS 6 (and neither does unhiding, though you can still view and download them) - whether that is permanent or only temporary I don't know. You should still be able to hide things via your computer's iTunes.

  • The three finger swipe left and right does not seem to work

    Hi
    I have been trying to do the left and right three finger swipe that allows you to move between applications to no avail.  It just keeps switching between dashboard and one app even if I have 5 apps open at the same time. Snow Leopard has this feature where all the apps opened are shown when you do the swipe and you can choose the one you want.  I think this is better but it doesn't work.
    Any help will be appreciated.
    Antonio

    Such spaces actually use very little extra memory relative to the apps you have open to occupy those spaces. I would go out on a limb and say it doesn't matter whether you have one space for every application or all on the same desktop.
    The limitation will come from the applications and the data you are crunching on them.
    (But that's just a personal view, haven't run into any limits on my ow 4GB Macbook Pro so far)

  • Magic Charger  Mobee for Magic Mouse doesn't work with Mac OS X lion Mountain

    The Magic Charger  Mobee for Magic Mouse  Apple
    with Mac OS X lion Mountain
    makes connections overflows and stops the system work.
    What could I do, other that disconnect Magic Charger?

    When you say you cannot add the printer, with the Add Printer pane open, is the 6250 visible in the Default Add Printer view? If no then it could be the USB cable at fault and I suggest you try another cable.
    If the printer is visible but the Mac fails to locate a driver when you select it then you may have to trash the contents of the BJPrinters folder (HD > Library > Printers > Canon) and then run the iX6250 driver installer again.

  • Magic mouse doesn't work with new batteries

    my magic mouse green led light won't turn on after putting in new batteries. I've changed the batteries a few times with no problems, but now it won't work. Can my mouse be defective/broken only after a few months??

    I have exactly the same issue.  Whenever I replace the batteries in my magic mouse I have a few days of constant disconnections.  At first it's very annoying and the mouse disconnects every 3 minutes or so.  It reconnects automatically in about 15 seconds but it's a huge pain.  After a couple of days the connection seems to smooth out and become very stable. My guess is that it is something to do with the actual BlueTooth radio and that the signal strength might actually be too high at first.  One note is that I have a magic mouse that I use with an iMac and that never seems to have the trouble, but the mouse that I've used with my laptops has always had this problem even with a couple of different laptops.  It might be the mouse, but it also could be that when I'm using my laptops the mouse is only a few inches from the computer, but on the desktop the mouse is probably 2 feet from the computer. 
    Seems like it's a radio issue to me.

  • I got Mavericks and now clicking my mouse doesn't work in many apple programs, is there anything I can do to fix this, and is Apple working on a fix for it?

    Clicking buttons doesn't work in calendar, preview, or updates, and it also doesn't work in fullscreen videos viewed on youtube.  Right click seems to work like a left click, but not for everything.  Clicking the mouse works in other programs.

    1. Reset PRAM.  http://support.apple.com/kb/PH4405
    2. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".

  • Magic Mouse doesn't work as it should

    Hello everybody,
    after reading tons of docs and forums without finding a solution I tell my problem to you:
    some days ago I got myself a Magic Mouse. Aiming to use it with my Macbook Air running Lion (all updates installed) I paired it but I only got a very basic menu. No scrolling options, the only things I can adjust is the double click and the pointers speed. The sexiest mouse in the unverse behaves like something I bought at the radio shack for 2,50 €. Then I paired this mouse with my Mac mini (Snow Leo, all updates) and everything worked well. Going back to my MB Air I recognized that the mouse had been renamed by my Mini, but nothing else happened. I just can't get it running the way it should. I read some tons of docs and did the following:
    - removed the batteries
    - did a pvram reset
    - removed the non-apple kernel extensions
    - erased com.apple.bluetooth.plist and lockfile
    - installed the MacOSComboUpdate several times
    - checked my MBA for apps like USB overdrive and uninstalled anything
    Nothing helped.
    Before I go berserk, has anybody any suggestion how to proceed now?
    Thanks in advance

    Hello X423424X,
    thanks for your hints. Unpairing the mouse from the MM at least gave it back its old name. I did the smc reset - at least I pressed the right keys, but there was no feedback about it - but the result is still the same. Uninstalling Onyx, Deeper, Fink and CoolTerm was useless too. I installed MagicPrefs today and it recognized the mouse as a magic mouse, I can configure it there, but the functionality still isn't there . All I get is this:
    I think I'll continue uninstalling. Maybe I find out that keynote smashes my system.

  • How can I cut and past on imac without a left and right click on mouse?

    Trouble cut and pasting on an imac since mouse has no right and left clicks...how can I highlight something and cut and paste somewhere else?

    Holding the Mouse button down and dragging across text should highlight it, and Command-C Command-V should allow you to copy/paste.

  • Cant swipe left or right with my iPhone 5s?

    Just was using my iphone like a hour ago , was checking out a app. I put it down , and start watching Man Of Steel. My screen is unresponsive it is only working when I swipe up or , down now. Like I can swipe up control center , also I can't press anything. I can't turn it off because I can't slide right lol. I can't do apple support because I don't know the serial code and can't click on my email *** is going on.

    GUYS I FIXED IT IF ANYONE ELSE HAVE THIS PROBLEM HOLD THE HOME BUTTON AND POWER TO RESTART THE PHONE!

Maybe you are looking for

  • Is there any hope for Mac users with AMD D700 graphic cards trying to run Adobe Premiere 2014 CC?

    Who wants to watch a grown man cry?  I spent a small fortune on a shiny new mac with 64GB Ram and to quote Larry Jordan, "I could rocket to the moon with the power of this computer."  I am running OSX (10.9.5) and have a 12 gig per channel ethernet M

  • Customized formatting in XML publisher

    HI, I just want to know if customized formatting is possible in designing the templates in BI publisher. e.g if i want the report to be displayed with some different formatting features in html and different in EXL grid line off in html and with grid

  • Problems Viewing and Printing PDFs Created from FrameMaker

    I got no responses to this issue in the Acrobat forums (I posted 6 days ago), so since at least some of the PDFs were created through FrameMaker, I am posting here to see if anyone in this forum has seen the problem. At our company, we regularly crea

  • Transporting KM documents and TREX indexes

    Hi, We are planning to transport KM contents with folder permissions and their asscoiated TREX indexes to a new set of EP-KMC and TREX system. Can KM migration tool be used for transporting contents from one server to another with permissions.. Or sh

  • Can't activate i message

    I can't activate i message on new ipad 2. keeps asking for my id and password and when I submit it goes right back to asking the same thing. What gives?