Swipe to close program groups iOS5 does not work!

I try to swipe my finger to close open program groups, but it does not work in iOS5.
I constantly find myself swiping to close the groups bechause it`s the simplest way to do it, but after upgrading to iOS5 i have to press the home button to close it.
Is this a bug? Hopefully, bechause using the home button is not as easy as swiping my finger!

Well it's hard to know what the OP is referring to no matter how hard you read the question. What are "program groups"?
As for folders, you close as you always have - touch the folder itself, touch anywhere on the home screen (which still works fine for me), or just press the home button.

Similar Messages

HT1222 I just installed this update and now I cannot access "Mail" at all. I tried reinstalling the program, but that does not work, either. Help!!!!!!

I just installed this update and now I cannot access "Mail" at all. I tried reinstalling the program, but that does not work, either. Help!

Paldeng, thanks for the suggestion. I've done all that. I can connect to the server, but apparently they are not recognizing my ID and password. I can use the server program if I don't go through Mail (using the same ID and password). My mother in another state with another provider has had the same email issue, as also my husband on his laptop who uses the same internet connection I do. His worked fine until we had it repaired at the Apple store and all the original programs reloaded (with the required updates, I assume). We can receive email in Mail, we just cannot send.
I contacted my service provider, and we went over my connections. They said it was not their problem and connected me with Apple, resulting in a charge to me because my warranty is long expired. Apple swears it is not their problem, it is the provider, so here I sit. My son was able to fix my Mom's Mail (she's 97) and got my husband's working also, until mine went out, by tweaking connection descriptions and ports remotely. The thing is, we had not messed with any of those settings, so what changed? I just did not want to bother my son again, as he has many other demands on his time.
Since this fiasco with the Mail v4.6 update, I'm wondering if something else was updated that works well with Lion and Mountain Lion, but does not work well with Snow Leopard and Leopard. I think the problem I had with the Mail update was that my Mail program had been renamed to Mail (original), and therefore was not being recognized by the update. Perhaps they had another tweak in there somewhere that is affecting outgoing mail connections?

Photoshop CS4 Extended ...Program's 'Help' does not work

I have PS CS4 Extended ... the Help command does not work ... I get a message saying "there was an error launching th eAdobe Help application. You may need to reinstall the application and Help component.
IK have un-installed the program completely and then reinstalled it. Still, the Help does not work, although the rest of the program seems to perform ok.
I'm rather at my wits end.
Has anyone any suggestions.
Thansk.

This won't fix your problem, but it might help as a workaround...
This is the page that normally opens when you click Help - Photoshop Help... in Photoshop CS4:
http://help.adobe.com/en_US/Photoshop/11.0/index.html
-Noel

Currency conversion with Group consolidation does not work

Currency Conversion WITHOUT group consolidation works (script logic reads CURRENCY = %GROUPS_SET%) which puts out values in USD. The values were translated correctly as per the exchange rates.
Now, since we need consolidation, I ran currency consolidation WITH group consolidation (I changed the script logic to read GROUP = %GROUPS_SET%). FXtrans package runs successfully with 0 records (0 submitted, 0 success, 0 fail).
I also referred NOTE 1519146.
Please advice.
Thanks,
Tagz

Hi,
You can try to use %GROUPS_DIM% or the dimension name directly in the dynamic script as suggested.
And also try after modifying your currency conversion script as GROUPS = %GROUPS_SET%. If this does not work please try
by hardcoding GROUPS=Value in the script and let us know how it works.
Hope this helps.
Regards,
Shoba

Can not type in the body of email program & reply button does not work.

I installed 10.4 (Family Pack) on my G4 400 and after a few days the email program does not work as it originally did. The reply button no longer works. (It did for a few days.) Additionally on a new mail or mail forward. I can not type in the body of the email after the first word. It just beebs at me. (It did work as normal for a few days.) I can still receive and can send mail. I have also installed this Family pack on my iMac flat panel G4 and have no mail problems. That mac is about 200 mile from this location. Before I installed 10.4 I was using 10.3.9 and mail was ok. I use high speed internet with the iMac and use dialup with the G4.

I've lost track of what computer you have where, and I don't understand why you keep installing buggy OS X 10.4.0 on systems that worked fine under OS X 10.3.9, without being able to update to install system updates afterwards.
That said, you may want to look at this web site for general Mac OS X troubleshooting tips:
http://www.thexlab.com/faqs/faqs.html
In particular, since I know of other people with the same problem as you that fixed it deleting caches, you may want lo look these two pages:
Resolving Disk, Permission, and Cache Corruption
Side effects of System cache cleaning
In addition to some utilities mentioned there for cache cleaning, you may also consider OnyX, if for no other reason, because it's free:
http://www.titanium.free.fr/
Although utilities such as OnyX allow you to clean many caches with just a click of the mouse, I'd recommend to be as selective as possible and clean them up one at a time, to try to identify which exactly is causing your problems, if any. This information, in turn, could be useful for other users. I'm pretty sure some Mail problems are related to cache issues, but I don't yet know which cache exactly is the culprit here (since it was not the Mail cache, I would say that the fonts cache should be next in the list).

Filter base on Person or Group column does not work correctly in sharepoint 2013

I have a list that contain "Person or Group"column that set "Allow Multiple Selections" to yes.
In sharepoint 2010 I create view and filter it base on this person or group column equal to [Me]. And it's work correctly.
Now in sharepoint 2013 when I filter view, base on this person or group column equal to [Me], it does not show me any items, although list has data that person or group column set to me.
What's wrong?
Thanks.

If you want to filter the list view when current user is in the group, then I recommend to use theMembership comparator in the
query and add it to the view page in SharePoint Designer:
<Where><Or><Membership Type="CurrentUserGroups"><FieldRef Name="AssignedTo"/></Membership><Eq><FieldRef Name="AssignedTo"/><Value Type="Integer"><UserID Type="Integer"/></Value></Eq></Or></Where>
More reference:
http://decodesharepoint.blogspot.com/2010/01/filter-list-views-by-user-groups.html

Don't have proper privilege to change the date and time. Group Policy does not work

Hello All,
I have configure group policy to change date and time only administrator. The problem is Windows XP machine cannot view the calendar but windows 7 can. So i need to view the calender for windows XP machine.
Error: you do not have proper privilege to change the date and time.
Please suggest.
Thanks

Hi Parvez,
Before going further:
I applied a VM Windows XP pro. When I logged in as a local admin, I can view the calendar from the right corner of desktop or from control
panel. However, when I logged in as a normal user account, I received the same message as yours.
For now:
I know this is not what you want. However, for normal users to view calendar, we can consider to give
Change System Time permissions to these users.
In addition, regarding this topic, the following article and thread can be referred to for more information.
You cannot set the date, time, or time zone on your computer
http://support.microsoft.com/kb/300022/en-us
Check windows calendar in XP pro without admin rights
http://community.spiceworks.com/topic/100116-check-windows-calendar-in-xp-pro-without-admin-rights
Please Note: Since the second website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards,
Frank Shen

Deployment of software through Group policy does not work

Hi all,
I am trying to deploy a program through Group policy, specifically winrar, any client computer is able to install the program. Please find below the events from the workstation:
Log Name: Application
Source: Microsoft-Windows-WMI
Date: 4/27/2014 10:06:01 PM
Event ID: 10
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: IRCLIENT0001.corp.healthcareinnovation.com
Description:
Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because
of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.
Log Name: System
Source: Microsoft-Windows-GroupPolicy
Date: 4/27/2014 10:04:49 PM
Event ID: 1085
Task Category: None
Level: Warning
Keywords:
User: SYSTEM
Computer: IRCLIENT0001.corp.healthcareinnovation.com
Description:
Windows failed to apply the Software Installation settings. Software Installation settings might have its own log file. Please click on the "More information" link.
Log Name: System
Source: Application Management Group Policy
Date: 4/27/2014 10:04:49 PM
Event ID: 108
Task Category: None
Level: Error
Keywords: Classic
User: SYSTEM
Computer: IRCLIENT0001.corp.healthcareinnovation.com
Description:
Failed to apply changes to software installation settings. Software changes could not be applied. A previous log entry with details should exist. The error was : %%1612
Log Name: System
Source: Application Management Group Policy
Date: 4/27/2014 10:04:48 PM
Event ID: 102
Task Category: None
Level: Error
Keywords: Classic
User: SYSTEM
Computer: IRCLIENT0001.corp.healthcareinnovation.com
Description:
The install of application WinRAR from policy Basic Computers GPO failed. The error was : %%1612
I am using windows server 2008 R2 and all my clients are running Windows 7 Enterprise and they are working over a domain, note that I am using VMware.
Below there are a list of the troubleshooting steps that have been already applied:
*Disable the the firewall both in the server and in the clients
*Grant read access to the folder where the the program is shared for installation, it was added the authenticated users and domain computers.
*Group policy modifications:
-> User Account Control
Policy Setting Winning GPO
- User Account Control: Behavior of the elevation prompt for administrators in Admin Approval Mode Elevate without prompting Basic Computers GPO
- User Account Control: Detect application installations and prompt for elevation Disabled Basic Computers GPO
- User Account Control: Only elevate UIAccess applications that are installed in secure locations Disabled Basic Computers GPO
- User Account Control: Run all administrators in Admin Approval Mode Disabled Basic Computers GPO
--> System/Group Policy
Policy Setting Winning GPO
- Startup policy processing wait time Enabled Basic Computers GPO
Amount of time to wait (in seconds): 120
--> System/Logon
Policy Setting Winning GPO
- Always wait for the network at computer startup and logon Enabled Basic Computers GPO
Thank you very much for your time.

Hi Marco,
Based on your description, we can enable diagnostic logging of Group Policy Software Installation processing to troubleshoot the issue.
Regarding this point, the following article can be referred to for more information.
How to troubleshoot software installations by using Windows application management debug logging
http://support.microsoft.com/kb/249621
Once you get the log, you may upload it to OneDrive and provide us the download link.
In addition, the following article provides a step-to-step guidance for deploying software via group policy and can be referred to for double check.
How to use Group Policy to remotely install software in Windows Server 2008 and in Windows Server 2003
http://support.microsoft.com/kb/816102
Best regards,
Frank Shen

After update Mac OS 10.9.1 Trim Enabler does not work anymore!

After updating from Mac OS 10.9.0 to 10.9.1 the program Trim Enabler does not work anymore and my 4 SSDs from Samsung and Kingston are no longer supported.
What can I do?
Should I scrap my SSDs?
Why does Apple do such things?
Will Apple that I switch to Windows? There Trim works with all SSDs and BluRay will not boycott!

Apple does not support TRIM for SSDs that were not factory
installed and TRIM Enabler is a hack to get around this. Any
hack is always subject to being disabled, or worse, with any
system update whether it is OSX or Windows.

Updated version installed and enabled, still does not work.

I have installed the latest version of Adobe Flashplayer for internet explorer 11, does not work, tried unistalling using unistall tool then reinstalling, still does not work, disabled All security software and Firewall, tried reinstalling, still does not work, made sure scripting was allowed, reinstalled, still does not work, Tried installing active X version, still does not work. Manually went into program files, deleted Abobe Flash program, reinstalled still does not work. Used cleaning and registry repair tools, still does not work, unistalled then used cleaning registry tools, reinstalled, still does not work, tried older versions of Adobe Flashplayer, still does not work. Watched and followed Youtube video's on how to reair Adobe flash, still does not work. Tried disabling then unistalled and reinstalled, then enabled again, still does not work. Used the adobe Check from adobe website after uninstalling and reinstalling at least twenty times, still shows NOT Installed or enabled, downloaded again from adobe site, still not working, showing either not installed or enabled, check wether enabled or not, still enabled, went under Downloads on my computer, download is there, looked under programs, Adobe is in program menu on computer, still does not work. Any ideas? Anyone? I have tried everything, it just will not work no matter what I do.
Running Window's 7 - Memory, DDR-2 667MHZ (1GB) 2037 MB, CPU Speed 3.2 GHZ, Hard Drive 320GB / 250GB- (699GB), Bandwidth 239 kbps,
Internet Explorer 11, Charter High speed internet connection
Message was edited by: Tiggerdad

This is a known problem with Internet Explorer 11, which Microsoft has been aware of since October 18 when they released their latest "untested" browser. The pages can't recognize the browser, so they don't recognize any of the plugins, like Flash Player. So far, Microsoft has made NO indication that they have any plan to fix it soon.
Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using an different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

How do I close programs in IOS7. The old way with double tapping the button and getting the red X does not work. Even rebooting the phone does not work.

How do I close programs with IOS 7? The old way of closing programs by double tapping on the button, holding down an icon until it started shaking and a red X appears does not work. Every program I opened appears. Turning on and off the phone does nopt work.

I just found out. Above the icon is a copy of the open page of the program(s). You slide the pages up to close.

I purchased Label Printer Pro 7, but it does not work. It crashes. Please recommend an address/shipping label program that works with Avery labels. Thanks.

I purchased Label Printer Pro 7, but it does not work. It crashes. I press print, and the program closes. I press save, and the program closes. I press print and the program closes. I have had an email exchange with Pabel Printer Pro 7, but the best they could offer was to go to Utilities and click on fixed permssions. I have done that several times, and the program still doesn't work.
Can you please recommend an address.shipping label program that works with Avery labels that I can purchase, and that is also simple to use?
Thanks,
Paula

I purchased Label Printer Pro 7, but it does not work. It crashes. I press print, and the program closes. I press save, and the program closes. I press print and the program closes. I have had an email exchange with Pabel Printer Pro 7, but the best they could offer was to go to Utilities and click on fixed permssions. I have done that several times, and the program still doesn't work.
Can you please recommend an address.shipping label program that works with Avery labels that I can purchase, and that is also simple to use?
Thanks,
Paula

This program is well compiled but does not work.

I would like to know why this program does not work properly:
the idea is :
1. the user introduces a text as a string
2.the progam creates a file (with a FileOutputStream)
3. then this file is encripted according to DES (using JCE, cipheroutputStream)
4.the new filw is an encripte file, whose content is introduced in a string (with a FileInputStream)
(gives no probles of compilation!!)
(don know why it does not work)
here goes the code:
import java.awt.*;
import java.awt.event.*;
import java.applet.*;
import java.io.*;
import java.security.*;
import javax.crypto.*;
public class cuadro extends Applet{
     private TextArea area1 =new TextArea(5,50);
     private TextArea area2 =new TextArea(5,50);
     private Button encriptar=new Button("encriptar");
     private Button decriptar=new Button("decriptar");
     public cuadro(){
          layoutApplet();
          encriptar.addActionListener(new ButtonHandler());
          decriptar.addActionListener(new ButtonHandler());
          resize(400,400);
          private void layoutApplet(){
          Panel keyPanel = new Panel();
          keyPanel.add(encriptar);
          keyPanel.add(decriptar);
          Panel textPanel = new Panel();
          Panel texto1 = new Panel();
          Panel texto2 = new Panel();
          texto1.add(new Label("               plain text"));
          texto1.add(area1);
          texto2.add(new Label("               cipher text"));
          texto2.add(area2);
          textPanel.setLayout(new GridLayout(2,1));
          textPanel.add(texto1);
          textPanel.add(texto2);
          setLayout(new BorderLayout());
          add("North", keyPanel);
          add("Center", textPanel);
          public static String encriptar(String text1){
          //generar una clave
          SecretKey clave=null;
          String text2="";
          try{
          FileOutputStream fs =new FileOutputStream ("c:/javasoft/ti.txt");
          DataOutputStream es= new DataOutputStream(fs);
               for(int i=0;i<text1.length();++i){
                    int j=text1.charAt(i);
                    es.write(j);
               es.close();
          }catch(IOException e){
               System.out.println("no funciona escritura");
          }catch(SecurityException e){
               System.out.println("el fichero existe pero es un directorio");
          try{
               //existe archivo DESkey.ser?
               ObjectInputStream claveFich =new ObjectInputStream(new FileInputStream ("DESKey.ser"));
               clave = (SecretKey) claveFich.readObject();
               claveFich.close();
          }catch(FileNotFoundException e){
               System.out.println("creando DESkey.ser");
               //si no, generar generar y guardar clave nueva
          try{
               KeyGenerator claveGen = KeyGenerator.getInstance("DES");
               clave= claveGen.generateKey();
               ObjectOutputStream claveFich = new ObjectOutputStream(new FileOutputStream("DESKey.ser"));
               claveFich.writeObject(clave);
               claveFich.close();
          }catch(NoSuchAlgorithmException ex){
               System.out.println("DES key Generator no encontrado.");
               System.exit(0);
          }catch(IOException ex){
               System.out.println("error al salvar la clave");
               System.exit(0);
     }catch(Exception e){
          System.out.println("error leyendo clave");
          System.exit(0);
     //crear una cifra
     Cipher cifra = null;
     try{
          cifra= Cipher.getInstance("DES/ECB/PKCS5Padding");
          cifra.init(Cipher.ENCRYPT_MODE,clave);
     }catch(InvalidKeyException e){
          System.out.println("clave no valida");
          System.exit(0);
     }catch(Exception e){
          System.out.println("error creando cifra");
          System.exit(0);
     //leer y encriptar el archivo
     try{
          DataInputStream in = new DataInputStream(new FileInputStream("c:/javasoft/ti.txt"));
          CipherOutputStream out = new CipherOutputStream(new DataOutputStream(new FileOutputStream("c:/javasoft/t.txt")),cifra);
          int i;
          do{
               i=in.read();
               if(i!=-1) out.write(i);
          }while (i!=-1);
          in.close();
          out.close();
     }catch(IOException e){
          System.out.println("error en lectura y encriptacion");
          System.exit(0);
     try{
          FileInputStream fe=new FileInputStream("c:/javasoft/t.txt");
          DataInputStream le =new DataInputStream(fe);
               int i;
               char c;
               do{
                    i=le.read();
                    c= (char)i;
                    if(i!=-1){
                    text2 += text2.valueOf(c);
               }while(i!=-1);
                    le.close();
          /*}catch(FileNotFoundException e){
               System.out.println("fichero no encontrado");
               System.exit(0);
          }catch(ClassNotFoundException e){
               System.out.println("clase no encontrada");
               System.exit(0);
          */}catch(IOException e){
               System.out.println("error e/s");
               System.exit(0);
          return text2;
     class ButtonHandler implements ActionListener{
     public void actionPerformed(ActionEvent e){
          try{
          if (e.getActionCommand().equals(encriptar.getLabel()))
               //     area2.setText(t1)
               area2.setText(encriptar(area1.getText()));
               //area2.setText("escribe algo");
               else if (e.getActionCommand().equals(decriptar.getLabel()))
                    System.out.println("esto es decriptar");
                    //area2.setText("hola");
     }catch(Exception ex){
          System.out.println("error en motor de encriptacion");
               //else System.out.println("no coge el boton encriptado/decript");

If you don't require your code to run as an applet, you will probably get more mileage from refactoring it to run as an application.
As sudha_mp implied, an unsigned applet will fail on the line
FileInputStream fe=new FileInputStream("c:/javasoft/t.txt");
due to security restrictions. (Which, incidentally, are there for a very good reason)

When Firefox is open the zoom function (option/command/space bar) does not work in Adobe programs (InDesign, Photoshop, Illustrator)

Mac OS X 10.6.7
CS 5.5
When Firefox is open the zoom function (option/command/space bar) does not work in Adobe programs (InDesign, Photoshop, Illustrator). This happens only when Firefox is open and when I close it the zoom functions work fine again without having to restart the applications.
This is intermittent but happens quite frequently each day if Firefox is active.

MDN doesn't mention -chrome being used for ordinary web pages: https://developer.mozilla.org/docs/Mozilla/Command_Line_Options#Chrome
When I use
firefox.exe -chrome about:permissions
I get a usable window, but zoom doesn't work as you noted.
How about using an intermediate page and window.open() for the target page? You can (mostly) restrict the chrome of windows opened that way, but it will leave behind the intermediate window...
https://developer.mozilla.org/docs/Web/API/Window.open

Hello Since yesterday evening. My itunse program does not work my mobile. Note I update the program to ios7 Please help me Thank you

hi
Hello
Since yesterday evening. My itunse program does not work my mobile.
Note
I update the program to ios7
Please help me
Thank you

I found this strange glitch that wouldn't let me open my iTunes Store. I tried all the reset options and still iTunes would close a second after it opened. I fixed this. Instead of using the iTunes Store icon on your home page to open it. Go into music and click on store. It will say "Cannot Connect To Store". Just tap ok. Then tap on "featured" on the bottom of the screen. That will take you to the store front page. After that is loaded. Back out and the icon for iTunes Store on the home page should work just fine. Hope that helps.

Swipe to close program groups iOS5 does not work!

Similar Messages

Maybe you are looking for