Switch 1924 Does not go to POST

Does anybody know how to fix this, i get 1-3-6 ports on my switch AMBER, cisco(Trblsht) says replace firmware did this already... i am starting to think it might be my Mem anybody ever run into this problem??
1xNonfatal---Port loopback test.
3x Fatal---Content addressable memory test. Switch is not operational. Contact Cisco Systems.
6x Fatal---CAM SRAM test. Switch is not operational. Contact Cisco Systems.

Hi Friend,
I believe this is a hardware failure and you may need to contact Cisco TAC to get it replaced.
Have a look at different POST results
http://www.cisco.com/univercd/cc/td/doc/product/lan/28201900/1928v67x/19icg67x/19ictrbl.htm#xtocid209651
HTH
Ankur

Similar Messages

  • Keynote Crashing - with Lion.   Most often when I switch out of Keynote to another program - Keynote freezes - says Application Not Responding.  If I save the Keynote before switching, it does not crash - only when it says it is an "edited" file....help

    Keynote Crashing - with Lion.   Most often when I switch out of Keynote to another program - Keynote freezes - says Application Not Responding.  If I save the Keynote before switching, it does not crash - only when it says it is an "edited" file....help

    I posted this on another thread. See if this works:
    1) Uncheck "Backup previous version" in Keynote's Preferences.
    2) Make a duplicate copy of your file that has issues and save it.
    3) If you still get spinning wheels from switching between apps after editing or 10 seconds of inactivity, manually save with command+s. It may beach ball here but be patient and wait for it to finish! Try editing and resume doing work now.
    Command+s may be a bit slow but I think that might be normal since the files are so big.
    Good luck and let me know if this works.

  • LID switch broken - does not detect open lid

    I am posting this again, after getting no solutions a long time ago.
    I am using a Razer Blade 14" 2013 with linux-ck kernel (although I have tested in the main kernel and the issue remains).
    I like to be able to close the lid to suspend. But it is not working properly.
    Note: I am using
    cat /proc/acpi/button/lid/LID0/state
    to figure out the state of the lid.
    When I start the laptop, the lid is correctly reported as open. When I first close it, the laptop goes to sleep, and when I open it again, it wakes up.
    However, it is now reported as closed, although I just woke it up by opening the lid.
    If I close the lid, it also does not suspend (I have to manually suspend).
    I originally posted this in: https://bbs.archlinux.org/viewtopic.php?id=173280
    I tried searching for similar problems, and newer topics came up, but I'm not sure what to do related to those, since the problem does not seem to be exactly the same (as in, this does not work in any kernel I have experimented with, including linux-lts). For reference, these are the topics:
    https://bbs.archlinux.org/viewtopic.php?id=168361
    https://bbs.archlinux.org/viewtopic.php?id=179216
    Some extra details: I disabled suspend on lid switch, so I wouldn't have to rely on it, but the problem remains: even if the laptop does not suspend, the lid goes to the closed state, and stays in that state.
    For most cases, this is not a big issue, except if I plug in an external screen: then my laptop's main screen becomes unusable, since it's reported as having the lid closed.
    Any suggestions would be very welcome.
    Thank you,
    Rodrigo

    rgomes wrote:I apologize, I was under the impression that it was okay, as long as enough time had passed.
    For extra information: this problem happens in other distros, so it seems to be a kernel problem (not a hardware problem because it works on Windows).
    What steps should I take to diagnose this, or does anyone know who I should email about this?
    Yeah, I should have posed more, but I was in a hurry.  We would definitely prefer that posts intended to reanimate a thread contain new information.  Share what you have learned about the problem -- it demonstrates initiative by establishing that one is not just waiting around for an answer.  Things like where you have searched, additional observations, new revisions of programs, etc...    It just helps keep the signal to noise ratio of the forums up.

  • Since switched computers, does not recognize HVX100b camera

    With the new iMac, it will not recognize an HVX100b video camera in iMovie... since I switched from a Macbook...
    System profiler does not see it either... the firewire cable.

    Good Morning, All,
    No ideas on how to take care of this situation, then?  Guess a trip to the nearest Mac store will be scheduled, and see if they can help us figure out why these two things are happening with iPhoto.  If we get it fixed there, I'll post a note here, so other who might be experiencing the same problems can learn the fix.  Take care, and God Bless!
    Every Good Wish,
    Doc

  • When posting to a forum the new version of Firefox does not show the post. When I start up IE and go to the forum there is the post. However Firefox 4 will not show the post. How can I fix this issue?

    Recently I upgraded to Firefox 4. I frequent various forums where I post advise on various subjects. I am finding that version 4 is showing the threads in the forums, allowing me to log in and to post. However the posts as sent in are not coming up at all, even if I get out and return, the page is not "refreshed."

    this is a follow up from the profane post earlier....
    i have done this twice in two other posts..
    here is my problem.. i started off trying to update itunes, it failed twice and said i needed to install manually via tools.
    the only place to get to tools is the pop up box that appears when you click check for updates.. if there is an available update then the pop up shows up with the quick time and itunes files to download. so i finally figured that out. i clicked on tools and manual update, four files were saved to a file. Apple mobile device support, another one similar, itunes, and another one i cant remember. I only downloaded the itunes file seeing as though thats all i needed to accomplish in the first place.
    so then i restarted my computer bc you need to reboot and then reopen itunes for update to take effect. once i have itunes back open i plugged in my new 5s which i am trying to sync to my computer to get all my stuff back bc i lost my previous phone over the weekend.. once i plugged the phone in an error stating i needed to unistall the apple mobile device support and itunes and then reinstall. well i dont know where those files were originally stored on my computer AND since my itunes was updated, just not the other 3 associated files, when i click check for updates it says its up to date and then pop up containing the quick time and itunes does not pop up thus i cant get back to the tools tab to manually save the 4 files again.
    so i was just going to uninstall itunes all together and then i thought well what happens if it erases all my photos apps songs etc... which would defeat the whole purpose in the first place of me trying to sync my new phone to get all my stuff back.
    so i literally have no idea what to do at this point.. if you have read this you are probably just as confused as me...

  • Moving Average does not base on Posting Date??

    Hi All,
    I got the problem with moving average, seem that the Posting Date is ignored when posting Sales document or purchase document,and moving average does not calculated correctly.
    The system only calculated the moving average
    based on the input seq, and the posting
    date is ignored??
    does anyone know its normal? or any
    setting can change the behavior?
    or any system auto adj?
    thanks
    Chris

    Hi Chris,
    This is standard functionality of SAP Business One.
    Please consider that system works with Continuous Stock System option enabled. This causes, that each item receipt have direct impact on MAP.
    Of course you have possibility to turn this off (before first posting), however then you will not have postings to the stock account, but to the revenues and expenses. In this case also MAP is not handled by the system.
    regards,
    Maciek

  • Reverse proxy plugin does not like the POST method

    My second tier is not functionning properly when placed behind a S1WS6 with reverse proxy
    Client ====== SunOne web server with Passthrough ====== .NET app server & web services.
    The web server configuration (reverse proxy � libpassthrough.so) is configured and is working correctly when it comes to requesting normal pages, however a problem arises when the request is made either by:
    1- Invoking a web service on the .Net tier, or
    2- The .Net tier performs a server.transfer call within the same .net server (Page transfer)
    Keep in mind that the .Net tier works fine when not accessed through the reverse proxy.
    It seems that when a POST method is invoked, a Session Close is sent before data is sent back !!
    We tried to isolate the problem from different angles but came up short, the http server log shows that the request was made
    192.168.2.7 - - [14/Jul/2004:14:10:56 +0300] "POST /wavedms2.0/TestWebService/TestService.asmx HTTP/1.1" 100 0
    Although response 100 indicates that it is waiting for more, while the web service error shows the following:
    The underlying connection was closed: An unexpected error occurred on a receive.
    at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
    at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
    at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
    at TestWebService.oWebService.MyWebSvc.HelloWorld()
    at TestWebService.Form1.button1_Click(Object sender, EventArgs e)
    In general, any page that uses POST method faces the same problem.I appreciate any help you can provide us with a solution on this issue.

    The Application Server plugin, libpassthrough.so, was designed to connect Web Server to Application Server. Unfortunately, it does not work with IIS which sends unsolicited "HTTP/1.1 100 Continue" responses.

  • ORA-28367: wallet does not exist  Re-Post From SQL PL/SQL

    Hi all
    Please Help about this
    The Detail of Sqlnet.ora file
    and Wallet is under wallet Directory
    ENCRYPTION_WALLET_LOCATION = (SOURCE = (METHOD=FILE) (METHOD_DATA =
    (DIRECTORY = d:\oracle\product\10.2.0\admin\ORA10DB\wallet)))
    But i want to Alter Through SYS then Error Msg is Apr as
    ALTER SYSTEM SET ENCRYPTION WALLET OPEN AUTHENTICATED BY "a0000000"
    ERROR at line 1:
    ORA-28367: wallet does not exist

    ORA-28367:     wallet does not exist
    Cause:     The Oracle wallet has not been created or the wallet location parameters in sqlnet.ora specifies an invalid wallet path.
    Action:     Verify that the WALLET_LOCATION or the ENCRYPTION_WALLET_LOCATION parameter is correct and that a valid wallet exists in the path specified.
    ~ Madrid

  • AR Aging Report does not change with Posting, Due, and Document selections

    It appears to me that when you run the AR Aging report with the same date ranges in each of the date selection fields, Posting, Due and Doument, you do not get a different display of aging buckets.  Does this report always display data based on Due Date?

    Hi Bill,
    When you run the AR Aging report change "Age by" option and check aging buckets are changing or not it has to change.
    Thanks,
    Sachin

  • Profanity does not allow to post in forum

    I have been trying to post a message regarding my laptop but keep getting the red x stating about the wording.
    There are no swear words just details of my problems yet to get it posted i actually cut it down to the laptop series and the operating system

    Sorry MasterG There isn't much I can change without deleting important information. I have sent an email to' [email protected]' I don't know if this is the proper address for the Moderator. I have tried switching sentences around but with no joy.

  • Stock does not exist when posting goods receipt ?

    Hi,
    I've created a purchase order ( OK ) And then use MIFO for posting goods receipt to warehouse 001, the posting is OK , But then I check the Stock for this material , There is nothing found . Could you please help me ?
    2. In Invoice verification MIRO , I use to verify invoice from PO , but it require Tax code ( I've entered all available tax code but it require jurisdiction code ) . Here could you please help how to config tax code for Invoice verification ( Not jurisdiction code ).
    Thanks in advance

    I've found that these codes was inserted automatically into  FM
       CALL FUNCTION 'TRANSACTION_ABORT'
            EXPORTING
                 transaction_id = transaction_id
            EXCEPTIONS
                 OTHERS         = 1.
       CALL FUNCTION 'TRANSACTION_ABORT'
            EXPORTING
                 transaction_id = transaction_id
            EXCEPTIONS
                 OTHERS         = 1.
       CALL FUNCTION 'TRANSACTION_ABORT'
            EXPORTING
                 transaction_id = transaction_id
            EXCEPTIONS
                 OTHERS         = 1.
       CALL FUNCTION 'TRANSACTION_ABORT'
            EXPORTING
                 transaction_id = transaction_id
            EXCEPTIONS
                 OTHERS         = 1.
       CALL FUNCTION 'TRANSACTION_ABORT'
            EXPORTING
                 transaction_id = transaction_id
            EXCEPTIONS
                 OTHERS         = 1.
    CALL FUNCTION 'TRANSACTION_END'
         EXPORTING
              transaction_id = transaction_id
         EXCEPTIONS
              OTHERS         = 1.
    FUNCTION bapi_po_create.                                    "#EC ENHOK

  • System SAP does not allow to post a journal that is not balancing?

    According to the implementation of controllers SOX in the company, I need
    to verify if the SAP ERP system must like standard functionality not
    allow to record documents that are not balanced (debit = credit).
    I appreciate its collaboration and I am awaiting its commentaries

    Hi
    SAP Follows the document principle which means that unless the debit is equal to credit in a document you cant save the document.
    This is based on the double entry system of book keeping and in sync with the accounting principles accepted world over.
    I hope im clear
    Assign points if useful
    Regards
    Aravind

  • Firefox on this computer does not let me post to U of Phoenix student web site

    Firefox has been re installed twice in two days to try to make it work for my posts to student web site University of Phoenix. It works on my other computer.
    == URL of affected sites ==
    https://ecampus.phoenix.edu/portal/portal/public/login.aspx

    Did you make sure to check your firewall settings before going after the router?
    http://messenger-support.spaces.live.com/blog/cns!8B3F39C76A8B853F!1070.entry

  • Device on the switch port does not match the switch port on the device.

    I have a HP 2910al-48G switch with bunch of HP 6200 pro connected to it. The devices on the switch under the VLANs tab show up at the correct port (if they do which is question #2) except for one device. For some reason, a different device shows up on the switch. But if i go to the device page, it shows it is connected to the correct port on the device.
    e.g., On the switch, port 14 shows PC01 when in fact PC02 should be connected.
    If i go to PC02 page, then it correctly says it is connected to port 14.So how can i manually edit the device info on the VLAN page?
    This topic first appeared in the Spiceworks Community

    Settings | Date and Time  then select Automatic date & time, and Automatic time zone. In this way, the carrier time will populate the phone. If it's still going 1hour off, then I'd call VZW and inquire if they have a tower issue, specially if it happens in one particular place.

  • Window Switching Shortcut Does Not Work

    Ever since I switched to Snow Leopard, my precious cmd+` command no longer cycles through windows within applications. If I look at my keyboard shortcuts this should work in all application but it only works in Finder. Am I missing something? Thanks!

    Ok...
    Try troubleshooting the Safari .plist file.
    Quit Safari.
    Open a Finder window. Select your Home Folder in the Sidebar on the left. It has a small house icon. Then open the Library folder then the Preferences folder.
    Move the com.apple.Safari.plist file from the Preferences folder to the Desktop. Now launch Safari. Try the keyboard shortcut for the Downloads window. If it didn't help, just move that .plist file back to the Preferences folder.
    Also, go to your Safari menu bar click Safari/Reset Safari. Select the top 7 buttons, click Reset. Restart your Mac. That might help too.

Maybe you are looking for