Switch 2 was removed from stack unexpectedly and again joined stack
Hello,
we have 2 switches in stack, last night switch 2 was removed from stack and got rebooted and again it got back in stack.
Switch -2 entered into the provisioned mode for certain span of time. snap shot is attached .
Apr 9 02:36:25.266 IST: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 1 Switch 1 has changed to state DOWN
Apr 9 02:36:25.837 IST: %STACKMGR-4-SWITCH_REMOVED: Switch 2 has been REMOVED from the stack
Apr 9 02:36:27.850 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/1, changed state to down
Apr 9 02:36:27.850 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/3, changed state to down
Apr 9 02:36:27.850 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/4, changed state to down
Apr 9 02:36:27.850 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/5, changed state to down
Apr 9 02:36:28.857 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/1, changed state to down
Apr 9 02:36:28.857 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/3, changed state to down
Apr 9 02:36:28.857 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/4, changed state to down
Apr 9 02:36:28.857 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/5, changed state to down
Apr 9 02:48:37.111 IST: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 1 Switch 1 has changed to state UP
Apr 9 02:49:08.048 IST: %STACKMGR-4-SWITCH_ADDED: Switch 2 has been ADDED to the stack
Apr 9 02:49:20.170 IST: %STACKMGR-5-SWITCH_READY: Switch 2 is READY
Apr 9 02:49:20.170 IST: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 1 Switch 2 has changed to state DOWN
Apr 9 02:49:20.170 IST: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 2 Switch 2 has changed to state UP
*Mar 1 00:01:02.738: %STACKMGR-4-SWITCH_ADDED: Switch 1 has been ADDED to the stack (Switch-2)
*Mar 1 00:01:02.738: %STACKMGR-4-SWITCH_ADDED: Switch 2 has been ADDED to the stack (Switch-2)
*Mar 1 00:01:07.024: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan (Switch-2)
*Apr 9 02:49:18.979 IST: %SYS-6-CLOCKUPDATE: System clock has been updated from 21:19:18 UTC Wed Apr 8 2015 to 02:49:18 IST Thu Apr 9 2015, configured from console by console. (Cochin-GMSC-SWTCH-2)
*Apr 9 02:49:19.382 IST: %SYS-5-CONFIG_I: Configured from memory by console (Cochin-GMSC-SWTCH-2)
*Apr 9 02:49:19.482 IST: %STACKMGR-5-SWITCH_READY: Switch 1 is READY (Cochin-GMSC-SWTCH-2)
*Apr 9 02:49:19.818 IST: %STACKMGR-5-MASTER_READY: Master Switch 1 is READY (Cochin-GMSC-SWTCH-2)
*Apr 9 02:49:20.053 IST: %STACKMGR-5-SWITCH_READY: Switch 2 is READY (Cochin-GMSC-SWTCH-2)
*Apr 9 02:49:20.178 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback99, changed state to up (Cochin-GMSC-SWTCH-2)
*Apr 9 02:49:20.178 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback999, changed state to up (Cochin-GMSC-SWTCH-2)
*Apr 9 02:49:20.321 IST: %SYS-5-RESTART: System restarted -- (Cochin-GMSC-SWTCH-2)
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(44)SE2, RELEASE SOFTWARE (fc2) (Cochin-GMSC-SWTCH-2)
Copyright (c) 1986-2008 by Cisco Systems, Inc. (Cochin-GMSC-SWTCH-2)
Compiled Thu 01-May-08 15:00 by antonino (Cochin-GMSC-SWTCH-2)
Apr 9 02:49:24.222 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/1, changed state to up
Apr 9 02:49:24.264 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/3, changed state to up
Apr 9 02:49:24.281 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/4, changed state to up
Apr 9 02:49:24.314 IST: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/5, changed state to up
Apr 9 02:49:25.228 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/1, changed state to up
Apr 9 02:49:25.270 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/3, changed state to up
Apr 9 02:49:25.287 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/4, changed state to up
Apr 9 02:49:25.321 IST: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/5, changed state to up
Apr 9 02:49:39.959 IST: %PLATFORM-6-MODULE_INSERTED: TwinGig Converter module inserted in slot 1 in Switch 2 (Cochin-GMSC-SWTCH-2)
Apr 9 02:49:42.106 IST: %PLATFORM-6-MODULE_INSERTED: TwinGig Converter module inserted in slot 2 in Switch 2 (Cochin-GMSC-SWTCH-2)
Switch 02
Switch Uptime : 5 hours, 38 minutes
Base ethernet MAC Address : 00:23:04:19:9A:00
Motherboard assembly number : 73-10313-11
Motherboard serial number : FDO12320AH4
Model revision number : A0
Motherboard revision number : A0
Model number : WS-C3750E-24TD-SD
Daughterboard assembly number : 800-28590-01
Daughterboard serial number : FDO123305QU
System serial number : FDO1234V07K
Top assembly part number : 800-28443-01
Top assembly revision number : A0
Version ID : V01
CLEI Code Number : COMVC00ARA
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(44)SE2, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 01-May-08 15:00 by antonino
Image text-base: 0x00003000, data-base: 0x02000000
Please help to find reason behind this unexpected reboot.
Regards
Jatinder
what is use of session 2 command ,is this service impacting command
sh ver
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(44)SE2, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 01-May-08 15:00 by antonino
Image text-base: 0x00003000, data-base: 0x02000000
ROM: Bootstrap program is C3750E boot loader
BOOTLDR: C3750E Boot Loader (C3750E-HBOOT-M) Version 12.2(35r)SE1, RELEASE SOFTWARE (fc2)
******* uptime is 11 weeks, 2 days, 8 hours, 40 minutes
System returned to ROM by power-on
System restarted at 01:41:48 IST Wed Jan 21 2015
System image file is "flash:c3750e-universalk9-mz.122-44.SE2/c3750e-universalk9-mz.122-44.SE2.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
License Level: ipbase
License Type: Permanent
Next reload license Level: ipbase
cisco WS-C3750E-24TD (PowerPC405) processor (revision A0) with 0K/16376K bytes of memory.
Processor board ID FDO1234V07J
Last reset from power-on
3 Virtual Ethernet interfaces
1 FastEthernet interface
56 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:22:BE:95:35:80
Motherboard assembly number : 73-10313-11
Motherboard serial number : FDO12340H8F
Model revision number : A0
Motherboard revision number : A0
Model number : WS-C3750E-24TD-SD
Daughterboard assembly number : 800-28590-01
Daughterboard serial number : FDO123305LA
System serial number : FDO1234V07J
Top Assembly Part Number : 800-28443-01
Top Assembly Revision Number : A0
Version ID : V01
CLEI Code Number : COMVC00ARA
Hardware Board Revision Number : 0x01
Switch Ports Model SW Version SW Image
* 1 30 WS-C3750E-24TD 12.2(44)SE2 C3750E-UNIVERSALK9-M
2 30 WS-C3750E-24TD 12.2(44)SE2 C3750E-UNIVERSALK9-M
Switch 02
Switch Uptime : 1 day, 7 hours, 35 minutes
Base ethernet MAC Address : 00:23:04:19:9A:00
Motherboard assembly number : 73-10313-11
Motherboard serial number : FDO12320AH4
Model revision number : A0
Motherboard revision number : A0
Model number : WS-C3750E-24TD-SD
Daughterboard assembly number : 800-28590-01
Daughterboard serial number : FDO123305QU
System serial number : FDO1234V07K
Top assembly part number : 800-28443-01
Top assembly revision number : A0
Version ID : V01
CLEI Code Number : COMVC00ARA
License Level : ipbase
License Type : Permanent
Next reboot licensing Level : ipbase
Configuration register is 0xF
Similar Messages
-
Node removed from the cluster and cannot joined to clustr again
Hi
I have problem with 2 node cluster. we are running windows 2008 R2 enterprise edition. Suddenly one node had some issue with network connnectivity and it was removed from the cluster. on the console its shows node1 offline. connectivity between the
server public and private nic is fine.
Node 'node1' failed to form a cluster. This was because the witness was not accessible. Please ensure that the witness resource is online and available.
Cluster resource 'File Share Witness' in clustered service or application 'Cluster Group' failed.
'File Share Witness is accessible to both the nodes. from the cluster log i can see failed to attempt lock on the FSW.
I have restarted the failure node. still the problem exist.
Thanks in advance to throw some valuable answers to my issue.Are you using Volume Manager Disk Group. Please check the below link if you are using it.
http://www.symantec.com/business/support/index?page=content&id=TECH127796
Thanks,
Umesh.S.K -
The print driver for HP Laserjet 3380 was for print only, was removed and when I went to download from apple, it stated to contact manufacturer. I have old driver in Time Machine, how do I reinstall from Time Machine that driver that worked?
Hi,
Trible post. Please use:
http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/HP-solution-center/m-p/4790405
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
iMovie was removed from my macbook pro after I downloaded OS X Yosemite, I had it before and have used it, but now I can only get it through the app store. I can't pay for it so I would really appreciate the help.
Look in your applications folder for the installer - Install OS X Yosemite. Delete it. Then go back to the App Store purchases tab and see if you can download it. You might have to re-index Spotlight.
Spotlight – Re-index -
CCMS Alerts keep coming for the system which was removed from System Monito
Hello SOLMAN Experts,
Iu2019ve noticed quite strange behavior of my SOLMAN CCMS Alerts: CCMS Alerts keep coming for the system which was removed from the System Monitoring.
Have you ever experienced this?
Please advice
Thank you
123Hi 123,
Please ensure that autoreaction methods are deleted for those systems.
You can verify system to autoreaction method assigments via RZ21 --> Technical Infrastructure --> Configure Central system -->Assign Central Autoreaction
also check if that system is appearing as online as follows
RZ21-> Topology --> system overview --> Monitored and Remote SAP systems
if yes , make it offline to stop triggering alerts.
I hope this information will help you.
Thanks,
Rupali -
Is it possible to know when the sim card was removed from iPhone after been stolen?
My iphone got stolen and I could see that my ipad got trouble with itunes and icloud. Is it possible to know when the sim card was removed from iphone?
no,
-
My user was removed from the wheel group automatically.
On the second day after doing a system update (which installed Gnome 3) I noticed that my user was removed from the wheel group. Any idea what did it?
Hmmm.. actually the only thing I did was turn on auto-login as my non-root user in System settings->User Accounts after unlocking it (the prompt asks for root pass). I'm not sure if that was before or after this happened though.
I haven't changed any group related settings since almost a year ago. It seems a little odd that this happened. Not a big deal though, since I re-added my user to the wheel group, but I'd still like to know how and what changed it. -
Warning: The disabled test "SomeTest" was removed from the test run.
Hello,
When I mark test with Ignore attribute, mstest show the next message: Warning: The disabled test "SomeTest" was removed from the test run. And I don't want to see this warning.
The question is: Is there any option to hide this warning, turn it off.
Sincerely,
AlexHi Alex,
I think I could repro this issue. For the Ignore attribute, it would share us this warning message by design when we run it in MsTest.exe.
You could submit this feature request:
http://visualstudio.uservoice.com/forums/121579-visual-studio.
The Visual Studio product team is listening to user voice there. You can send your idea there and people can vote.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I used to be able to delete email on my PC and they would be removed from my Iphone and Ipad. Now I must delete them separately on all 3 devices. How can I fix this?
https://discussions.apple.com/message/17410477#17410477
-
My computer (Win 7) recognises my ipod but when Itunes is automatically started the ipod is removed from "my Computer" and is not recognised in itunes, my device manager states he device is being "uninstalled by window" error 21, what is happpening.
Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock -
I have MBP 13 late 2011:
Will it be able to support a 3tb hardisk?
Secondly, if i delete a song from itunes,is that song removed from the mac and is the space freed up?If not then what should I do to free up space when i delete songs from itunes?Your MBP will support a 3T HDD provided it is formatted correctly and has sufficient power. Most large HDDs require an outboard power source.
When you delete songs from iTunes you will get a message if you want to send it to trash. If you send it to trash, space will be freed up only when you empty trash. An individual song does not consume much space so if your HDD is becoming full, more drastic action s should be considered, such as moving an entire file to an external HDD.
Ciao. -
I have allowed my iTunes Match subscription to expire, because of a limited data plan so can't listen to music outside my house. My music files were removed from my computer and are inaccessible without renewing the subscription. How do I get them back?
Hi,
I presume you deleted the original files as match would not have done so. Do you have a back up. If so, restore your music from that. If not, your will have lost all your music as this needed to be on your hard drive when you unsubscribed.
Jim -
i made music purchases in indian store from 6months and now i see all my music purchases are removed from my purchases and i am not able to find them any more except few recent purchases.. i invested lot of money now i see all are lost.. what can i do?
Have you failed to maintain a backup copy of your content?
-
How would I find out why a particular app, In-A-Visit, was removed from app Store?
Ask the app developer. Maybe they will tell you why... Apple will not disclose the reason to you unless you are the developer. It's entirely possible that the developer removed it.
-
Revision: 4233
Author: [email protected]
Date: 2008-12-04 12:15:28 -0800 (Thu, 04 Dec 2008)
Log Message:
When an FxComponent is removed from the stage and then re-added, we no longer reload the associated Skin unless it is absolutely necessary.
Bug Notes: None
QE Notes: None
Doc Notes: None
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/baseClasses/FxComponent.asplease let me know the linksys device model number you are using ..
Maybe you are looking for
-
HT1551 holw do i get my phone to play on my apple tv?
How do I get my phone to play on Apple TV?
-
Scanned document printing too small
Hi, I'm using Mac OS X 10.4, Epson 1660 Photo Scanner and Epson TWAIN (via Photoshop). I'm scanning a document for print, yet no matter what dpi I choose, the document prints out very small on my Canon i850 inkjet printer. I've wasted about 10 pages
-
Speical GL Posting to one time A/R or A/P account
Hello, Does SAP allows special G/L posting to one time A/P or A/R account? While trying to post, it just gave an error saying not possible. Any pointers to this will be useful. Thanks Kishore
-
Prompting for expired passwords
The SQLDeveloper interface does not appear to prompt users to change their expired passwords. Our developers use SQL*plus for their initial login to change their expired passwords, yet does anyone know an easier way? __thanks
-
DivX player - QuickTime - no sound during playback
Trying to play avi files on this MacBook - downloaded QuickTime 7 and DivX player for Mac - both play the video wonderfully but with no sound - My computer is not muted - nor do I have the DivX player muted - playback is fine on the Windows side usin