Switch 2960 http

warm greeting, I require to administer or enable by HTTP switch 2960. Somebody could to send the steps to do this activity,
My email is [email protected]
thank you very much,
John Jairo Osorio

conf t
ip http server
end
wr

Similar Messages

Switch 2960-x

i want to know if this model (WS-C2960X-48TS-LL ) from switch 2960-X with lan lite support DHCP server ?

Hi!
I don't think L2 Access switch will be act as DHCP server, but you can check it here (based on IOS ver.)
http://tools.cisco.com/ITDIT/CFN/jsp/by-feature-technology.jsp
Feature info: search for: DHCP server / view image-detail.
P.S. strange it shows DHCP SERVER even with lanlite ios. probably Feature Navigator is not the best source
Have a nice day,
Dmitry

JSF / Switch between HTTP and HTTPS

Hello!
I want to switch between HTTP and HTTPS using JSF.
Under Apache Struts framework I can use struts extension "sslext.jar" to configure switching between http and https in one web application.
e.g. Login-jsp should be secured, all other jsp's should run unsecured.
Any ideas?
regards
Harald.

Thanks,
I made the necessary enhancement for the second phase, password confirmation required when return to SSL zone after leaving it after a succesful login.
I did the following:
1) create a class in the application scope and/or singleton class with the servlet paths that require SSL
2) create a plugin that reads ActionConfigs from the ModuleConfig
3) create a filter that sets a request scope flag that says that password must re-entered.
Code Extracts:
1) MainshopContainer application level parameter singleton class:
private static HashMap sslZoneMap = new HashMap(50); // key = servlet path of request, example /login.do
public boolean isInSSLZone(String servletPath)
return this.sslZoneMap.containsKey(servletPath);
public void addToSSLZone(String servletPath)
this.sslZoneMap.put(servletPath,null);
public int getNumberOfActionsInSSLZone()
return this.sslZoneMap.size();
2) Struts plugin
add a call to loadSSLZoneMap in plugin init method:
loadSSLZoneMap(config, mainshopContainer);
private void loadSSLZoneMap(ModuleConfig config, MainshopContainer mainshopContainer)
throws ServletException
try {
ActionConfig[] actionConfigs = config.findActionConfigs();
for (int i = 0; i < actionConfigs.length; i++)
if (actionConfigs.getParameter().indexOf("/jsp/account/") < 0) // /account/* = URL path for SSL zone
// not found = not ssl zone
System.out.println("loadSSLZoneMap, following actionConfigs excluded from SSL Zone: "+actionConfigs[i].getPath());
else
// found = ssl zone
String servletPath = actionConfigs[i].getPath()+".do";
mainshopContainer.addToSSLZone(servletPath);
System.out.println("loadSSLZoneMap, following servletPath added to SSL Zone: "+servletPath);
System.out.println("loadSSLZoneMap, number of actions in SSL Zone: "+mainshopContainer.getNumberOfActionsInSSLZone());
catch (Exception ex)
ex.printStackTrace();
throw new ServletException("Exception caught in loadSSLZoneMap: "+ex.toString()+" Initialization aborted.",ex);
3)
public void doFilter(ServletRequest request, ServletResponse response, FilterChain chain)
throws IOException, ServletException {
HttpServletRequest req = (HttpServletRequest) request;
HttpServletResponse res = (HttpServletResponse) response;
String servletPath = req.getServletPath();
boolean secure= this.mainshopContainer.isInSSLZone(servletPath);
The wole picture:
The filter adds a RequestDTO object that includes all request parameters, one of them is the secure flag.
I have a session scope class UserContainer that includes all the session parameters, one of them is the lastRequestDTO.(last made request)
At the end of all my jsp's I set the lastRequestDTO variable.
In that method I set the passwordConfirmationRequired flag if needed:
public void setLastRequestDTO(RequestDTO _lastRequestDTO)
if (this.lastRequestDTO != null && this.lastRequestDTO.isSecure() != _lastRequestDTO.isSecure())
this.setPasswordConfirmationRequired(true);
this.lastRequestDTO = _lastRequestDTO;
I read the passwordConfirmationRequired in all my jsp's in the SSL zone that allow editing or deleting and if that flag is true, a valid password must be re-entered in order to make the updates.
When the password is OK I reset the passwordConfirmationRequired to false.
I need some help for the first phase, that is SSL setup for all actions related to jsp's with url path /account/*
I tought I could define it in the web.xml:
<security-constraint>
<web-resource-collection>
<web-resource-name>All Account Related Pages</web-resource-name>
<url-pattern>/account/*</url-pattern>
</web-resource-collection>
<user-data-constraint>
<transport-guarantee>CONFIDENTIAL</transport-guarantee>
</user-data-constraint>
</security-constraint>
but that doesn't work and finnaly understood why:
Example: /WEB-INF/jsp/account/login.jsp corresponds to /login.do
The url pattern /account/* at the container level is never encountered.
Is it allowed to declare the following action path: /account/login instead of /login?
If yes I could add following prefix /account to all my action paths and forward paths and this could resolve my problem.
What's your opinion?
If no, would your library resolve this?
Will all the Struts/JSP/JSTL url generating tags pick-up the required protocol (http/https) according to your configuration file?
Regards
Fred

No switch to HTTPS occurred in Web Dynpro ABAP application

We are building a Web Dynpro ABAP application and when I logon I get:
No switch to HTTPS occurred, so it is not secure to send a password
I want to suppress this message but I can only find a parameter that works for BSP applications (You can suppress the message using the property BspDontShowHttpsWarning. Goto SICF and locate your service, open node and choose tab error pages. At redirect URL add '&bspdontshowhttpswarning=X').
However, for Web dynpro this parameter does not work. Does somebody know if there is a parameter available for web dynpro ABAP applications to suppress this message?
kind regards
Angelique Heutinck

Angeline
I asume that you are using a "Basic Authentication" method, if this is your case, you should configure the SICF service with the following parametters:
1) Go to SICF, /yourservice / double click
2) On the "Logon Data" tab, in the "Procedure" option choose "Alternative Logon Procedure".
3) On the same tab, at the "Logon procedure option", delete the SSO option, and change the Number of the another methods, raised the "Basic Authentication" to the first place.
4) Go to Error pages tab, flag "System logon", and after that click over Configuration, here check "Do no display warnings"
Hope this help you !

Switching from HTTP to HTTPS - adverse side effects???

Hi everybody,
what are the possible adverse side effects when changing from HTTP to HTTPS?
I could imagine that previously saved web bookmarks would not work, correct?
Links saved in roles will have to be adjusted in roles, correct?
Anything else?
Does anybody have knowledge/experience in this area and how do you recommend to proceed when switching a productive system from HTTP to HTTPS?
Martin

The web bookmarks stored on IE browser will still point to the HTTP service, not HTTPS, you will have to make the changes manually.
The URLS for BW Reports are generated dynamically, you should be able to maintain an entry in table HTTPURLLOC and get this switched to HTTPS. see OSS note 805344 for the same.
Thanks.

URL redirect - how to switch from https to http

Hi, all.
We have some requirement that the portal session be switched to https on some iviews while the rest of the contents are in http. I am thinking of using url redirect on the web dispatcher.
What I found is that the url redirect from http to https works great. Now if I want to switch back to http, the redirect doesn't work. Note that the http port is 80 and https port is 443 on the web dispatcher. To test, here is the parameter I did to switch from http to https. This works and transforms the url from http://ozonehomeep3.xxxxxxxxx/irj/portal/zsap_xxxxx to https://ozonehomeep3.xxxxxxxxx/irj/portal/zsap_xxxxxxxxxxxx
icm/HTTP/redirect_0 = PREFIX=/, FROM=/irj/portal/zsap_, FOR=ozonehomeep3, FROMPROT=http, PROT=https, HOST=ozonehomeep3.XXXXXX
If I flip it back the other way:
icm/HTTP/redirect_0 = PREFIX=/, FROM=/irj/portal/zsap_, FOR=ozonehomeep3, FROMPROT=https, PROT=http, HOST=ozonehomeep3.XXXXXX
When I connect using the url https://ozonehomeep3.xxxxxxxxx/irj/portal/zsap_xxxxxxxxxxxx, it ignores the parameter and the redirect to http did not happen.
What is wrong?
Thanks,
Jonathan.

Hello,
I've had a similar problem for one of my customers.
I've tried to do it on a root level, just Https://FQDN:port_https/ to http://FQDN:Port_http/
I've used this parameter to solve it:
icm/HTTP/redirect_0 = PREFIX=/, FOR=FQDN, FROMPROT=HTTPS, HOST=FQDN, PORT=80, PROT=http
maby you should try:
icm/HTTP/redirect_0 = PREFIX=/, FROM=/irj/portal/zsap_, FOR=FQDN, FROMPROT=HTTPS, HOST=FQDN, PORT=80, PROT=http, TO=/irj/portal/zsap_
You should also verify that the standard http port (80) are open in the firewall from the outside, just take a telnet session to FQDN and port 80
to quickly determined if the firewall policy are right.
Good luck!
Kind Regards
Håvard Fjukstad.

Switching between https and http requests

Hi,
Our application is built using ADF 10.1.3
This application need to be integrated with an in house built single sign on system. ( SSO system is built in C# and .NET)
This single sign on system only understand https request. Once user is validated against single sign on system, our application's authorization page is called in HTTPS mode. Once the user is authorized, he is forwarded to home page. While forwarding to home page, we want to convert the HTTPS request to HTTP.
Currently once the user is authenticated, all requests are happening in HTTPS mode.
We do not know how to make http request from existing https requested page.
Any help is appreciated.
Thanks
Ranajit

Hi,
the way to do this is by redirecting the call from a PhaseListener or command button. The solution Avrom refers to is a PhaseListener that uses XML configuration file to determine whether or not the page you are navigating to requires https or http. The code that handles the protocol switch is printed below
* Determines if the requested page requires SSL and if the current protocol
* meets this need. If not the protocol is switched between http and https
* @param viewId
* @param pageRequiresSSL
public void handleProtocolSwitch(String viewId, boolean pageRequiresSSL)
    ExternalContext exctx = FacesContext.getCurrentInstance().getExternalContext();
    boolean isSecureSSLChannel = ((HttpServletRequest)exctx.getRequest()).isSecure();
    // pages that require SSL and SSL is on, or pages that don't require
    // SSL but SSL is on and should be kept
    if (pageRequiresSSL && isSecureSSLChannel || !pageRequiresSSL && isSecureSSLChannel && isKeepSSLMode) {
    printDebugMessage("Page requires SSL = "+pageRequiresSSL+", channel is secure = "+isSecureSSLChannel+", is keep SSL = "+isKeepSSLMode);
    printDebugMessage("No protocol change required");
    // page requires SSL and SSL is not active. Switch to SSL.
    if (pageRequiresSSL && !isSecureSSLChannel) {
      printDebugMessage("Page requires SSL = "+pageRequiresSSL+", channel is secure = "+isSecureSSLChannel);
      printDebugMessage("Protocol change required to use https");
      switchToHttps(viewId);
    // switch to HTTP is page doesn't require SSL and channel isn't secure
    // and isKeepSSLMode is false
    if (!pageRequiresSSL && !isKeepSSLMode && isSecureSSLChannel) {
      printDebugMessage("Page requires SSL = "+pageRequiresSSL+", channel is secure = "+isSecureSSLChannel+", is keep SSL = "+isKeepSSLMode);
      printDebugMessage("Protocol change required to use http");
      switchToHttp(viewId);
    if (!pageRequiresSSL && !isSecureSSLChannel) {
      printDebugMessage("Page requires SSL = "+pageRequiresSSL+", channel is secure = "+isSecureSSLChannel);
      printDebugMessage("No protocol change required");
* Switches from https to http using a redirect call
* @param viewId
private void switchToHttp(String viewId) {
      FacesContext facesContext = FacesContext.getCurrentInstance();
      ExternalContext exctx = facesContext.getExternalContext();
      ViewHandler vh = facesContext.getApplication().getViewHandler();
      String pageURI = vh.getActionURL(FacesContext.getCurrentInstance(), viewId);
      //redirect to http URL
      String remoteHost = getHostNameFromRequest();
      printDebugMessage("Switch to http on host "+ remoteHost);
      try {
          String port = httpPort.equalsIgnoreCase("80") ? "" : ":" + httpPort;
          String url = "http://" + remoteHost + port + pageURI;
          printDebugMessage("Redirecting to http URL "+ url);
          //TODO check request Map
           this.printDebugMessage(" Content size of RequestMap before redirect "+exctx.getRequestMap().size());
          exctx.redirect(url);
      } catch (IOException e) {
          printDebugMessage("Redirect to http port failed "+ e.getMessage());
* switches to https using a redirect call
* @param viewId
private void switchToHttps(String viewId) {
      FacesContext facesContext = FacesContext.getCurrentInstance();
      ExternalContext exctx = facesContext.getExternalContext();
      ViewHandler vh = facesContext.getApplication().getViewHandler();
      String pageURI = vh.getActionURL(FacesContext.getCurrentInstance(), viewId);
      //redirect to https URL
      String remoteHost = getHostNameFromRequest();
      printDebugMessage("Switch to SLL/https on host "+ remoteHost);
      try {
          String port = httpsPort.equalsIgnoreCase("443") ? "" : ":" + httpsPort;
          String url = "https://" + remoteHost + port + pageURI;
          printDebugMessage("Redirecting to https URL "+ url);
          //TODO check request Map
          this.printDebugMessage(" Content of RequestMap before redirect "+exctx.getRequestMap().size());
          exctx.redirect(url);
      } catch (Exception e) {
          printDebugMessage("Redirect to http port failed "+ e.getMessage());
* @return the hostname of the page request
private String getHostNameFromRequest() {
      ExternalContext exctx = FacesContext.getCurrentInstance().getExternalContext();
      String requestUrlString = ((HttpServletRequest)exctx.getRequest()).getRequestURL().toString();
      URL requestUrl = null;
      try {
          requestUrl = new URL(requestUrlString);
      } catch (MalformedURLException e) {
          e.printStackTrace();
      String remoteHost = requestUrl.getHost();
      return remoteHost;
}If your container doesn't support session sharing between http and https then the session is renewed. In OC4J you will have to configure this.
Frank

Problem when switching from https to http on Safari

I am using a Safari browser and try to switch from https to http within the same web application.
The Safari browser is configured so that on Safari->Preferences->Security the check box "Ask before sending a non-secure form to a secure website" is checked.
When using the Safari browser in my web application and going from an https page to an http page, the browser shows an (expected) dialog box asking the user whether he wants to send a non secure form. Clicking Ok (twice) causes the following problematic dialog box to appear :
Safari can't open the specified address;
Safari can't open "(null)" because Mac OS X doesn't
recognise Internet addresses starting with "(null)"
How can I avoid this problem without having to uncheck the above mentioned check box in Safari->Preferences->security.

I have somehow a similar problem,too. My site is in https upon login which maintains some session data. One of the features of my site is the file upload (servlet) which does some batch processing. Since my https session terminates(timeout)upon uploading, I resorted to switching the link to an http session using
File Upload
When I do "session.getAttribute('data')" in my servlet after being called by the "upload.jsp", a NullPointerException is thrown at that particular line.
My question:
1. Upon uploading of file/data via https, is there a maximum bytes that it can only process? My file is just less than 1MB and it terminates the session. How do I go about it? Should I switch it then to an http?
2. If I switch from https to an http session, SSL session data can not be retrieved from an http session?
Thanks!

Issues switching to HTTPS

Hi all.
I followed Scott Spadafore's advice on forcing a specific page to HTTPS:
Re: HTTPS and LOGIN
I'm getting redirected to the right protocol, but the wrong port. The problem seems to be here:
htp.p('Location: http://'||
owa_util.get_cgi_env('HTTP_HOST')||
owa_util.get_cgi_env('SCRIPT_NAME') ||
owa_util.get_cgi_env('PATH_INFO')||'?'||
owa_util.get_cgi_env('QUERY_STRING'));
HTTP_HOST returns "host.mcg.edu:7779" in non-SSL mode, and "host.mcg.edu:4443" in SSL mode. HTTP_HOST contains the port of the protocol I'm switching from, so for example when switching to HTTP, I get:
http://host.mcg.edu:4443/pls/htmldb... <-- SSL port
If I use the SERVER_NAME CGI variable (host.mcg.edu) and then hardcode the http or https port number, it works. Not very portable, though, as our production environment uses default ports (80 and 443).
What am I doing wrong?
Thanks for your insight.
-John

John,
you could also use mod_rewrite to configure this stuff directly in your Apache (Oracle Http Server powered by Apache :).
http://blog.murf.org/?p=24
This way you would have the configuration in a single place.
~Dietmar.

AAA configuration on switches 2960

Hi
I have introduced the following configuration of AAA in the switches of series 2950 and works very well,
but when I do the same in switches 2960, the local password does not work and it is obligatory to introduce the switch in the ACS to have management of the switch.
Is needed some additional configuration of AAA in switches 2960?
Thanks.
tacacs-server host y.y.y.y
tacacs-server key xxxxx
aaa new-model
aaa authentication login acceso-consola group tacacs+ line
aaa authentication login acceso-telnet group tacacs+ line
aaa authentication enable default group tacacs+ enable
aaa authorization commands 1 default group tacacs+ if-authenticated
aaa authorization commands 15 default group tacacs+ if-authenticated
aaa accounting commands 1 default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
line con 0
exec-timeout 0 0
login authentication acceso-consola
line vty 0 4
login authentication acceso-telnet

Maria
Perhaps some clarification of your environment might help us. In particular it would help to understand how you produce the "without ACS" environment.
Clearly the switch is still configured for ACS. And clearly there is connectivity from the switch to the ACS. And the ACS is responding to the authentication request from the switch. I am not sure what the errno 254 represents or what on the ACS server causes it. Perhaps you can help us understand that?
I had a situation at one point that may have been similar to your situation. Our devices were sending requests to ACS. But ACS was not able to communicate with the external DB because one of the services on ACS was not running. ACS responded with an error indicating unable to process. But the IOS devices were not interpreting that as an error that should send them to the backup authentication method.
If you are stopping something on the ACS server then I would suggest that a better test would be to break IP connectivity between the switch and the ACS so that the switch receives no response to its request or to change the configured IP address for the server in the switc and point to some device not running ACS so that the switch receives a port unreachable response to its request. Those would give you a better test of without ACS.
HTH
Rick

Switch to HTTPS

Hello,
I am trying to submit a paragraph of code which has been working on other computers. On my system, I receive the error:
E_COSMOS_GENERIC: Could not get stream info for http://cosmos08.osdinfra.net:88/cosmos/bingads.business.fastjobs/shares/adCenter.BICore.SubjectArea/SubjectArea/resources/PROD/MonetizationFacts.view
[HttpStatusCode = Forbidden; ErrorCode = 0x80004005(The operation failed); Description = HTTP(http://cosmos08.osdinfra.net:88/cosmos/bingads.business.fastjobs/shares/adCenter.BICore.SubjectArea/SubjectArea/resources/PROD/MonetizationFacts.view?view=xml&property=info)
is not allowed. Please switch to HTTPS instead. For more detailed instruction, please check (https://microsoft.sharepoint.com/teams/Cosmos/Documents/SecurityAndCompliance/Security%20Updates%20to%20VcClient.docx).
Essentially it seems that Visual Studio is telling me that this location is not within communication, because I have to switch to HTTPS. However, because I don't explicitly reference this location in my code, I deduce that it is embedded somewhere in my
system. Does anybody know how to make the switch from HTTP to HTTPS within the Visual Studio system?
Thanks,
Rohit

Hi Rohit,
From your description, could you please tell me how you submit a paragraph of code which has been working on other computers and then get the error message?
If possible, I suggest you can provide me the detail steps or screen shot about how to submit a paragraph of code which has been working on other computers.
What application you are developing?
To further help you support this issue, please tell me more information about your issue.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to connected mgmt port on switch 2960 -XR

Hi guys,
I need of a technical support to resolve a issue with some Switch 2960-XR and its MGMT Port installed on our infrastructure.
I'd like to reach it via ssh connection to management them from a remote station (my PC), some guides found on Internet suggested me to use a extenal Hub/switch and a PC dedicated for that like this:
|SW1 mgmt port|------|H|
|SW2 mgmt port|------|U|-------- PC
|SW3 mgmt port|------|B|
I've also tried to patch the mgmt port on a port tagged with a management VLAN but it's not worked.
I ask you if there is a way to reach that SW using mngt port without use another external SW, thanks in advance for your support

Our network is hybrid, we have CIsco Sw and IBM Sw.
For the IBM solution the configuration of mgmt port is inband (data) and use an interface called IP2 where assigning an IP address we can manage via ssh the sw. In this case we've created a dedicated Vlan 15 and assigned as IP 10.10.10.15/24 to the interface IP2.
In Cisco Sw the only ways I know is either to create a dedicated Vlan with an IP or using Out of band, but in this case I've to use an external Sw.
Which is the best solution to have the management port on Cisco Sw without to use out of band?
thanks

Packets input or output in switch 2960

Hi all,
How to know have packets input or output of one port in switch 2960 Catalyst. Thanks you!

Thank for your answer.
I have some problems involved Cisco Catalyst 2960 Switch.
I am using a device which includes Marvell PHY chip 88E1111. The device can send and receive PTP packet to and from my PC.
Now, I want to connect the device and the PC to Cisco Catalyst 2960 Switch, which will help me trace all of packets in the network . The test scenario is below:
-          Switch: Cisco Catalyst 2960
-          Tracer: Wireshark software
-          PC: Windows 7-64 bit, plugging in Switch port 1 (interface 1)
-          Device: FPGA board, plugging in Switch port 2 (interface 2),
operating mode: 1000Mbps, Fullduplex, no auto-negotiation, no auto power efficient-ethernet.
-          Interface 2 of the Switch is static set by the device’s MAC
address , which ensures the Switch known the device’s MAC.
I suffered a problem. Although the RJ45 TX status led are on, there is not any packet sent to the Switch. I have no idea in this case.
Could you give me an advise please.

NAC is not managing new Cisco Switch 2960S

Hello,
we want to add a Cisco Switch 2960S to the devices, but CAM says he is unable to control that switch.
The switch type Cisco WS-C2960-8TC-L is already running on the CAM.
Is there a OID Update for the 2960S?
Our CAM version is 4.5.1.

Solution:
Use the update on CAM:
-> Device Management -> Clean Access -> Updates -> Update
to get new OIDs for the switches.
This solved the problem. The device was added afterwards successfully.

No switch to HTTPS occurred, so it is not secure to send a password

Hi,
I have created one SAP Transaction iview with Tcode HRESSIN_F16 which is accessed through ESS service in portal. This iview uses system with logon ticket say ESS. When we access this iview in our local LAN using HTTP URL it works fine.
But when we access it through HTTPS (https://www.mycompany.com) we get a logon popup saying No switch to HTTPS occurred, so it is not secure to send a password even though we have implemented SSO with logon tickets.
What are the possible causes?
Regards,
Bharat Mistry.

Hi Joerg,
Thanks for your quick reply.I will do as you suggest and then let you know whatever result
Ok I am explaning you in detail.
I have created one SAP Transaction iview with Tcode HRESSIN_F16 which is accessed through ESS service in portal. This iview uses system with logon ticket say ESS. When we access this iview in our local LAN using HTTP URL it works fine.We have Web dispatcher also.
In our case their is situation of (SSL termination without metadata exchange).Means upto Web dispatcher HTTPS then from it to WEB AS HTTP.
When we access it through HTTPS , we get a logon popup saying No switch to HTTPS occurred, so it is not secure to send a password even though we have implemented SSO with logon tickets.
But even after this warning if We provide username and password set on ECC6,it gives error either user name or password is incorrect.
And I am sure that username and password are same as ECC6.
There is also no problem of authorization,we had also tried with SAP_ALL.
Here it is web dispatcher profile parameter
SAPSYSTEM = 8
wdisp/shm_attach_mode = 6
rdisp/mshost = ....
ms/http_port = 8101
DIR_INSTANCE = /secudir
ssl/ssl_lib=/secudir/libsapcrypto.so
ssl/server_pse=/secudir/sec/.....pse
wdisp/auto_refresh = 120
wdisp/max_servers = 100
wdisp/server_info_location = /msgserver/text/logon
icm/server_port_0 = PROT=HTTPS,PORT=443
icm/server_port_1 = PROT=HTTP,PORT=0
icm/HTTP/admin_0 = PREFIX=/sap/wdisp/admin,DOCROOT=/webdisp/admin
wdisp/HTTPS/dest_logon_group = APPS
wdisp/ssl_encrypt = 0
wdisp/add_client_protocol_header = true
icm/HTTPS/verify_client = 0
icm/HTTP/redirect_0 = PREFIX=/, TO=/irj/index.html
#icm/HTTP/redirect_0 = PREFIX=/, TO=/APPS~irj
is/HTTP/show_detailed_errors = false
icm/HTTP/error_templ_path = /webdisp/error
icm/HTTP/file_access_0 = PREFIX=/images/,DOCROOT=/webdisp/images
Thanks & Regards,
Sunny
Edited by: Sunny Patel on Jan 21, 2008 2:07 PM

Switch 2960 http

Similar Messages

Maybe you are looking for