Switch Activity - Problem

Problem:
A workflow switch statement with two branches, Branch 1 is a Success Path and Branch 2 as a Failure Path.
In the Success Path we set an attribute orderState with a value 1 and in the Failure Path we set an attribute in a complex element orderContact.
Executing the above workflow such that it takes the Success path ALWAYS results in BPEL setting the orderState with value 1 that was specified in the Success path (which is correct) AND ALSO sets/initializes
the complex orderContact element with a NON NULL value ( which is not what it should do).
This is the output. I have highlighted the orderContact element that should not have
been as part of the output structure.
<output>
<part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="payload">
<BranchResponse xmlns="http://acm.org/samples">
<orderState xmlns="">1</orderState>
<orderContact xmlns="">
<homeNumber />
<workNumber />
<mobileNumber />
<emailDetails />
</orderContact> </BranchResponse>
</part>
</output>
I can provide you with two sample workflows that demonstrate this behavior with a switch statement setting the orderContact element in the Failure Path and another workflow that uses and empty activity in the Failure Path.
Appreciate any support from this end.
Regards
Nivedan

Hi,
Please post the HP product number for your PC. How to Find the HP Model Number and the HP Product Number or let HP automatically find your PC model number and HP network attached printers. This will allow others to review your issue, make suggestions and review your responses. This is usually the best way to get assistance.
Open up your PC and use a can of compressed air to clean out all of the dust from all of the fans including the graphics card if your have one and also the CPU heat sink.  Do you have a discrete graphics card in your PC?
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Similar Messages

  • What is diff b/w pick and switch activity in bpel?

    what is the difference between pick activity and switch activity in BPEL? example Please

    1)The switch activity is an IfElse with two different flows, based on a conditional expression, derived out of existing message(s) in your process.
    Eg. i) Whether the salary is greater than 10,000 or not.
    ii) Whether the age is greater than 60 or not.
    iii) whether the department is finance or not.
    2)The pick activity is an IfElse with two different flows, based on two different messages/signals, that you can expect to receive(when you are waiting for a message) from outside of your process.
    Eg. i) whether you received a reply message or a timeout signal.
    ii) whether you received a AddNewEmployee message or UpdateEmployee message.
    The (decision for which route to be taken for) pick activity is based on the MessageType, while the switch is based on the contents in a message. The pick activity implies that you are waiting for a message, this can occur, at the start of your process or in the mid of your process. However, switch activity doesnot wait for any message, hence can only occur in the mid of the process and can not be the start of a process.
    Mark the posting appropriately as "helpful" or "correct answer", if your issue is solved.

  • Can you help me with FontExplorer font activation problems?

    Anyone know how to solve a font activation problem I am having with FontExplorer 4.2? I am on a new mac with new fonts, I am using Maverick with Adobe CS6. With my new mac I bought the latest version of FontExporer Pro X 4.2. This program is having trouble with font activation in all my Adoble suite apps including Indesign. Here is what I am seeing:
    1. The font activates, but the Adobe app does not recognize that it is active. If I go back to Font Explorer and deactivate manually, then re-activate manually. The adobe app might then recognize it. Sometimes it still doesn't. But this does not stay permanently, as soon as I do a restart I have to go through this process again. I see this more often with the User system fonts, but a few times with my regular fonts.
    2. Other times, such as in Indesign, I go to open the file and the file stalls and doesn’t progress while it is trying to activate the fonts.
    3. Another time I have seen after an illustrator file is opened the fonts aren't recognized as being opened and the text goes blank on the page.
    4. In all adobe apps, if I go to use "replace font" on the missing fonts (even though they are turned on) the "replace font" menu only shows the basic system fonts, it won't show me the other fonts turned on.
    I have seen these issues with both formerly created files and fresh new files.
    I have tried the following based on feedback from Font Explorer staff:
    Refresh your Spotlight database
    1. Quit all applications other than FontExplorer X
    2. Choose Tools > Refresh Spotlight Database
    Clean your font caches
    1. Quit all applications other than FontExplorer X 2. Choose Tools > Clean Application Font Caches (check all available checkboxes)
    3. Choose Tools > Clean System Font Caches (requires restart)
    Still after trying this multiple times, the errors continue and even get more random.
    I have also tried this based on their feedback:
    go to FONTEXPLORER X PRO -> PREFERENCES -> ADVANCED and make sure that "Automatically deactivate fonts which have not been activated by the system" is NOT set to never.
    Then click on TOOLS and clean all font caches. Then reboot the system.
    The auto-activation is using a new Apple technology (called Core Text), which unfortunately does not work correctly with some of the Adobe and Quark applications when keeping the fonts permanently activated. We are currently working on an update, and the next version of FontExplorer X Pro will fix this issue.
    This has also not work. Can anyone help me?

    Here is the official work-around for this problem.
    1. Locate "FontExplorer X Pro.app" in Applications
    2. Right-click on "FontExplorer X Pro.app" and select "Show Package Contents"
    3. Navigate to /Contents/Helpers/
    4. Double-click "FontExplorerXLauncher-3.app" or right-click and "Open" to launch it manually. This is needed only once, afterwards the plugins will work normally.
    Please make sure you open the version with the "-3" suffix, the other one does not fix the problem.

  • DC Activation Problem in CBS

    Hello,
    I am facing DC Activation problems in CBS.
    - We have two DC utils and config. The config DC uses utils DC and everything is working fine locally
    - Today we are migrating these local projects in NWDI.
    - I created new DCs in NWDI and copied the SRC folder. Did all required steps for migration, built locally and it works fine.
    - I then checked in utils and activated the same in NWDI, its working fine.
    - I then defined the dependency from the active workspace and everything is still fine.
    - Now I checkin the src of config DC and build the same. Here the problem arises. The Build Fails
    - Checked SDN and can see lot of people facing this problem but there is no solution.
    Any pointers to solve this problem will be helpful
    Regards,
    Shubham
    Here is the problematic area in log:
         [wdgen] [Info]    Generating packages/com/arteriatech/ppc/uivisibilityws/model/Scrvar_Fstat.java
         [wdgen] WARNING: Metadata of component UIVisibilityComp is not valid! ComponentUsage "//WebDynpro/Component:com.arteriatech.ppc.uivisibility.comp.UIVisibilityComp/ComponentUsage:HandleExceptionCompInst", Role "UsedComponent": A minimum of 1 object(s) is required
         [wdgen] [Error]   com.arteriatech.ppc.uivisibility.comp.UIVisibilityComp --> Component UIVisibilityComp: Has invalid component usage 'HandleExceptionCompInst'
         [wdgen] [Error]   com.arteriatech.ppc.uivisibility.comp.UIVisibilityComp --> Component UIVisibilityComp [HandleExceptionCompInst]: Component usage has no used component
         [wdgen] [Error]   com.arteriatech.ppc.uivisibility.comp.UIVisibilityComp --> Component UIVisibilityComp [ValidationCompInst]: Component usage has no used component
         [wdgen] [Info]    Catching throwable null
         [wdgen] [Info]    com.sap.webdynpro.generation.ant.GenerationAntTaskError

    Problem Solved.
    I removed the utils DC from my client. Also deleted the folder from the workspace. After this I created the project from the Dev Config perspective again. I was surprised to see there is no component in my utils DC and thats why the problem was there.
    I again copied all the src folder in the workspace and refreshed the DC. Now it locked all the source in the activity. I checked it in and repeated the above excercise. This time all the source code was there.
    I deleted the dependency in the config dc and created again from active workspace(although now I realize it was not required) and checkedin and activated.
    Hurray!!! It got activated.
    Regards,
    Shubham

  • WHAT THE HELL IS GOING ON? Activation problem 194:100

    What the ihell is going on?
    I have been burdened with activation issues for weeks - see my previous thread. I have had no response here from Adobe about how to fix it. Please don't say this is a 'user to user' forum. It isn't a 'U2U' forum when Adobe state this is the first place we should look!
    Now, no CC program will run owing to something called 'Activation problem 194:100'.
    Yes, I have logged out. Yes, I have rebooted. Yes, I have deactivated 'more than 2 machines'. Why should I have to repeatedly click to 'deactivate 2 previous activations' when there has NEVER been more than one activation?
    Adobe not only make me look a laughing stock in the classroom but this constant issue that has been going on for weeks now subliminally tells students Adobe software is useless!
    When will I be able to use CC again? I am paying for it remember!!!!!!!!!!!!!!!!!!!!!!

    Hello Rajshree,
    Welcome to Adobe Forum.
    CC has only EVER been activated on ONE PC.
    If you look at http://forums.adobe.com/message/6198690#6198690 you'll see (like many other users) I have to constantly sign in and reactivate. It is probably this that is causing the multiple activations.
    However, to reiterate, CC is only running on ONE computer. It has not at any time been activated on more than the same PC. One activation - one PC.
    So, the suggestion of waiting a few hours (if the prog won't activate / run) is less than adequate. Like everyone else, I pay to have it running 24 hours a day - every day.

  • Flash MX Professional 2004 Activation Problems

    I am having trouble activating Flash MX Professional 2004. I have had the product for many years, but it is asking again to be reactivated, probably because I have moved the vmWare virtual machine on which it is installed to a new host computer.
    I have learned that the old Macromedia activation servers are no longer available, and have tried using the information provided by http://helpx.adobe.com/x-productkb/policy-pricing/macromedia-legacy-activation-error.html. But that only activates me to a non-professional version. I need to use features in the Professional version.
    Is there a serial number available for Flash MX Professional 2004?

    OK, I have got my problem sorted.
    After a second call to UK customer service, I was e-mailed a serial number that they said was for Flash MX 2004 Professional. However, it didn't work with my version! My version is 7.2, and the original serial number of my product starts PFD700. The serial number given by Adobe is PFD800-00466-08280-86965. Maybe the 800 means its for a later version, don't know, but my version does not accept this as a valid serial number.
    A third call to try to get a PFD700 serial number got me a brick wall again, they insisted that was the only serial number for MX 2004 Pro they had. At this point I followed sinious's suggestion and asked to talk to a supervisor. They were on the phone, and I was promised a call back. I'm still waiting.
    So I hunted a bit harder with Google and eventually found a site that gave me a serial number. The use of that unlocked the Professional features of my version, and I'm up and running again.
    Thanks for your contributions guys, you've both helped. I agree with sinious's critism of moccamaximum, and wouldn't normally go to sites of dubious provenance for help. But after being exhausted by my efforts to get help from Adobe - who to be fair nearly got there in the end - I went hunting and found something that solved my problem. After all, Adobe themselves are publishing activation-free serial numbers.
    I've given the serial number I got from Adobe, it may help others who experience activation problems in the future.
    But I'll follow sinious's advice and not give out the serial number or details of the website I got it from. It wasn't very hard to find.

  • Nokia lumiya 820 music activation problem

    I have music activation problem, how to solve them ? when I start nokia music then display massage Activation problem. This problem from begining from purchase the mobile, so once I had close the nokia account and then reopnen the same account. I have not install this account any other mobile. So please give me solution for this problem.

    DineshRamolia,
    Welcome to Nokia Discussions!
    Steps on how to activate Nokia Music for Windows Phone is located on this page at http://www.nokia.com/in-en/support/product/nokia-music/userguidance/?action=singleTopic&topic=GUID-D...
    If the problem still persists, I suggest you to contact Nokia Support in your country.

  • HT4623 i have sim activation problem in my i phone after updating

    i have sim activation problem in my i phone after updating

    If the phone was unlocked by anyone other than Apple or the carrier it was locked to (that is, unlocked by hacking) then it will become locked to the original carrier when you update it.

  • Switch statement problem

    I am doing a question in which I have to make a simple ATM program that can withraw and deposit money as many times as the user wants. To exit the program the user has to hit "x". I have to use a switch statement. Im getting incompatible type errors after compiling it. Can anyone help me? Sorry if the formattings not too good.
    //ATM.java
    //This program reads in a user's opening balance and performs a withdrawal or a deposit at the request of the user
    import java.text.*;
         public class ATM
         public static void main(String args[])
              int      balance;
              char      withdrawal, deposit, choice;
              //Ask for the opening balance
              System.out.print("Please enter your opening balance");
              balance=UserInput.getInt();
              //Find out what the user wants done
              System.out.print("What would you like to do? (Withdrawal, Depositor Exit(x))");
              choice=UserInput.getChar();
                                                                          switch(choice){     
    case "w":
                                                                          while(balance>0)
                                                                                              System.out.print("How much would you like to withdraw?");
                                                                                              withdrawal=UserInput.getChar();
                                                                                              balance=balance-withdrawal;
                                                                                              System.out.print("Your remaining balance is " + balance);
                                                                                              break;
    case "d":     
    while(balance>0)
                                                                                              System.out.print("How much do you wish to deposit?");
                                                                                              deposit=UserInput.getChar();
                                                                                              balance=balance+deposit;
                                                                                              System.out.print("Your new balance is " + balance);
                                                                                              break;
    case "x":          
                                                                System.out.print("Goodbye and thank you for using this program");
                                                                                              break;
    default:     
                                                                     System.out.print("We were not able to process your request, please try again");
                                                                                              break;
    }

    Type a reply to the topic using the form below. When finished, you can optionally preview your reply by clicking on the "Preview" button. Otherwise, click the "Post" button to submit your message immediately.
    Subject:
    Click for bold      Click for italics      Click for underline           Click for code tags      
      Formatting tips
    Message:
    Add topic to Watchlist:
    Original Message:
    Switch statement problem
    Xivilai Registered: Mar 3, 2007 9:52 AM      Mar 3, 2007 10:06 AM
    I am doing a question in which I have to make a simple ATM program that can withraw and deposit money as many times as the user wants. To exit the program the user has to hit "x". I have to use a switch statement. Im getting incompatible type errors after compiling it. Can anyone help me? Sorry if the formattings not too good.
    //ATM.java
    //This program reads in a user's opening balance and performs a withdrawal or a deposit at the request of the user
    import java.text.*;
    public class ATM
    public static void main(String args[])
    int balance;
    char withdrawal, deposit, choice;
    //Ask for the opening balance
    System.out.print("Please enter your opening balance");
    balance=UserInput.getInt();
    //Find out what the user wants done
    System.out.print("What would you like to do? (Withdrawal, Depositor Exit(x))");
    choice=UserInput.getChar();
    switch(choice){
    case 'w':
    while(balance>0)
    System.out.print("How much would you like to withdraw?");
    withdrawal=UserInput.getChar();
    balance=balance-withdrawal;
    System.out.print("Your remaining balance is " + balance);
    break;
    case 'd':
    while(balance>0)
    System.out.print("How much do you wish to deposit?");
    deposit=UserInput.getChar();
    balance=balance+deposit;
    System.out.print("Your new balance is " + balance);
    break;
    case 'x':
    System.out.print("Goodbye and thank you for using this program");
    break;
    default:
    System.out.print("We were not able to process your request, please try again");
    break;
    }

  • I am having activation problem please guide me

    i am having activation problem and the error is repeating again and again

    Read https://discussions.apple.com/thread/4868797?start=0&tstart=
    Has your phone been jailbroken?

  • Activation problems with ipad 2 wifi gsm

    i have been having activation problems with ipad 2 ever since it was launched in sptemeber 2013. its gets stuck on server busy try later or try using itunes. even with itunes it does not activate. went to a apple reseller. he tried updating it through some DFU mode but did not go through. now he says that the ipad will have to be sent to US for repairs. any help or advise from the users ? thanks

    I have the same problem.I hope somone comes up with a solution or it is fixed in the ios 7.1 update

  • Activation problems with iPhone 5

    Has anyone had activation problems with iPhone 5 today?? is there any kind of trouble with itunes and wireless activation??

    I have unlocked and used iphone 5's before. Never had this problem.
    When I put my tmobile SIM in it;ll say no service then go back to the actviation screen after saying "activation required"

  • Activation problem of Illustrator CS2

    Hi, i'm from IT of Brandt Italia S.p.A., we have 4 licence of Adobe Illustrator CS2 installed and actually utilized by users.
    1 pc was broken last week, the hard disk failed and i cannot recover any data.
    I'm installing another pc for the same user with the same programs that he was used on the previous pc, i'm using WinXP
    I'm trying to activate Illustrator CS2 by internet, but don't work.
    I have tryed to activate by phone, also don't work.
    i have see on you site that this version is nomore supported, also the activation is not possible.
    But different years ago i have buyed this version of software, is my rigtht to install and use it, i cannot spend money to buy a new version of the software because i cannot activate it legally.
    surfing to your site, i see this page: https://www.adobe.com/cfusion/entitlement/index.cfm?e=cs2_downloads&loc=it but i cannot download Illustrator CS2 version.
    How i can resolve the activation problem? i cannot install another version, i have 4 users that have to work to same files with the same software version, i have no money to spend to upgrade, i don't care if the software version is old, works well fo me, i don't need any new feature.
    thanks for your help
    Mario Ghidelli from italy

    thanks for reply, but in the page you link, i select Italian language version:
    https://www.adobe.com/cfusion/entitlement/index.cfm?e=cs2_downloads&lo c=it
    and i have an error "Error processing your request, We're sorry, we encountered an error processing your request"

  • New ios 7 activation probleme

    im having an activation probleme in the new update can anyone help?

    All I can say is buyer beware. Lkely you purchased a stolen iPod. The Activation Lock is doing its job.
    This:
    iCloud: Find My iPhone Activation Lock in iOS 7
    says
    How do I check for Activation Lock before purchasing a used device?
    When purchasing an iPhone, iPad, or iPod touch from someone other than Apple or an authorized Apple reseller, it is up to you to ensure that the device has been erased and is no longer linked to the previous owner’s account.
    Follow each of these steps to make sure that you can use the device you purchase:
    Turn the device on and slide to unlock.If the passcode lock screen or the home screen appears, the device has not been erased. Ask the seller to completely erase the device by going to Settings > General > Reset > Erase All Content and Settings. Do not take ownership of any used iPhone, iPad, or iPod touch until it has been erased.
    Begin the device setup process.After choosing a language, choosing a country, and connecting to a network, the device will begin activation. If you are asked for the previous owner’s Apple ID and password, the device is still linked to their account. Hand the device back to the seller and ask them to enter their password. If the previous owner is not present, they can remove the device from their account by signing in to icloud.com/find. Do not take ownership of any used iPhone, iPad, or iPod touch until it has been removed from the previous owner’s account.
    You will know that a device is ready for you to use when you are asked to “Set up your iPhone", “Set up your iPad", or “Set up your iPod” during the device setup process.

  • I think pesimo customer service three days, I'm looking for someone I can ayudr activation problem with my CC and can not find anyone who can help me.

    I think pesimo customer service three days, I'm looking for someone I can ayudr activation problem with my CC and can not find anyone who can help me.

    Online Chat Now button near the bottom for Activation and Deactivation problems may help
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

Maybe you are looking for