Switch audio tracks from left to right

Is it possible to take the left audio track and put in on the right track?
I have a clip that only has audio on the left track. I cannot recapture. So, I want to know if I duplicate the audio and then on the duplicate switch the left and right. I know that this is less than the ideal solution, but quality is not the most important thing at this point. Thanks before hand.

To the OP ... Individual mono tracks can be panned full right or full left - which controls which stereo speaker reproduces the material. If your audio is playing only out of the left speaker (-1), and you want it to play out of both, panning to center (0) will accomplish what you want.
Duplicating a mono track and panning one track full left and the other full right will do the same thing as one track panned center as both speakers are playing the exact same material. Creating two tracks of the same material panned left and right does not create stereo as there is no stereo separation.
Or did I misunderstand your question?
x

Similar Messages

  • Changing track from left to right speaker

    I recently acquired a Macbook with Garageband '09. I made a recording with two mics, one recording a guitar, and one recording a drum kit (They were both recorded at once on the same track). Since I had set the input to stereo, the guitar (mic 1) played through the left speaker, and the drums (mic 2) played through the right speaker. I would like to have mono sound, but I still want to use two mics to provide better clarity and prevent spill.
    Is there a way to keep the track I have (guitar=left/drums=right) and perhaps duplicate it and switch channels from left to right creating a mono sound? Basically one track would be guitar=left/drums=right and the other would be guitar=right/drums=left. Or is there perhaps a way to switch a stereo recording to mono once recorded?

    I would like to make a track mono, but do not see where in the "pane" I can do that. The only option I have found is to change the input from stereo to mono. Since I have audio that is already recorded, and is unfortunately only on the left track, is there a way to get the mix down to be mono so that I'm getting the audio in both speakers?

  • How to split audio tracks into left and right channels as we do in FCP or Avid needed for dubbing?

    We are recording in two languages, one in left and the other in right channel. However, in Adobe Premiere Pro we are not able to split the track when we take up for rought cut. Both the tracks are found mixed. Pl help. Since we need to maintian the split track to dubb into other languages.

    You need to do this before adding the footage to the sequence:
    Select the clip (or multiple clips) in the bin
    Menu > Clip > Modify > Audio Channels (Shift G)
    Change 'Number of Audio Tracks' to 2
    Change 'Channel Format' to Mono
    Dismiss the info message.
    When you place the clip in a sequence it will now drop L and R into separate tracks (assuming your sequence allows that audio model).

  • I am using pages designing a flow chart, question "I seem to have an issue with the arrows that you can add text to, it appears I can not move the point of the arrows up or down they only switch from left to right.

    I am using pages designing a flow chart, question "I seem to have an issue with the arrows that you can add text to, it appears I can not move the point of the arrows up or down they only switch from left to right.

    Last point...who archives? On my regular email page I now have the Archive icon to the left of my Delete icon which I would prefer was to the left, first in the line as this is the icon I use mostly. With Folders, my Sent and Trash lists, who needs to archive?
    I can help you only with the placement of the icon placement -- if you right-mouse click on the toolbar, then select Customize Toolbar, you can move an icon to where you want it to be.

  • HT1430 Having reset my iPad via the settings route, the apple logo appeared on screen and the bar below it filled from left to right, then stopped. I can do nothing more: it will switch off, but when switched on again only the apple logo and filled line a

    Having resent my iPad using the Settings route, the Apple logo appeared onscreen and a line below it filled from left to right. When full, the device did nothing. I was able to switch it off and back on, only to see the same Apple logo and filled line. Even pressing the ON botton for a few seconds did nothing. The device is now inert, and I cannot access it. Please help!!!

    Reset iPad and continue with Restore.
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Extracting audio tracks from a specialized CD

    I am quite new to the Adobe A/V applications having used Sony Sound Forge and Vegas for many years. I am now a monthly Creative Cloud subscriber and thought it might be a good idea to learn Audition, Premiere, etc. since I also use Photoshop, Dreamweaver, Lightroom, and Acrobat.
    My audio workflow is probably quite different than most in that I work part-time at a church and deal with a number of CDs that always contain split tracks (instruments left; voices right), and usually a demo track and a stereo instrument only track. The split track and stereo instrument versions of the song contain multiple tracks within them for practice purposes. When I use the "Extract audio from CD..." command I usually select all of the tracks but would like to have all of those tracks included in ONE .wav file with markers inserted at each track. Is that possible?
    The only way I have been able to reconstruct the multi-track single song files after extracking them in Audition is to open each track in Audition and then create a multitrack session and piece each song together on a single track line. This is time consuming, especially when some of the CDs have multiple songs and  may contain 70-90 individual tracks (divisions).
    Another thing I have not been able to figure out how to do is to take a split track that is contained within a stereo Audition track in a multitrack session and create two mono tracks - one containing the instruments, and one containing the voices. Our choir director will sometimes want to eliminate parts of the vocal tracks and use a soloist instead and having the two tracks as separate mono tracks makes that easier, although I know I can open the piece up in the waveform editor and have access to either the left or right track separately.
    I am also looking for a manual or online course for learning several of the Adobe products. Any suggestions?
    Your help is most appreciated!

    Thank you durin! Yes, File > Open Append is much faster. It requires, however, that I know which track numbers make up an entire song. Then the Edit > Extract Channels to Mono Files works great too. After working on the individual tracks I then Ctrl-clicked on each track and did Multitrack > Bounce To New Track > Selected Track to convert it back into a stereo track in the waveform editor. From there I can add it to a CD layout along with the other songs we are going to use on a Sunday.
    I’m still working on the editing of the sermons I record for the purpose of burning CDs and also putting on our website. There are a lot of pauses that I need to take out and I have used Audition to help automate that process. I haven’t quite gotten it adjusted correctly yet as it seems to be deleting too much. I am also looking for a way to do a global delete of certain sounds like the sound many speakers make just before starting a sentence by putting their tongue against the front of their lower teeth and making a “clicking” sound.
    I really like your “Skip Selection” option as I use a similar command in Sound Forge to check the area I am about to delete to check continuity before deleting the selection. In fact, I programed my mouse to do that with the push of one of its buttons. Will probably do that in Audition too.
    I’m beginning to like Audition more and more each time I use it. Can’t wait to learn Premiere and its related applications!

  • How to extract one of several audio tracks from a .vob file?

    Hi guys,
    hope you can help me, i'm looking for a solution for hours now but can't find one.
    I would like to know how to extract one audio track from a .vob file when there are different tracks/languages on the dvd? Media encoder does it very well, but i can't find the option for choosing the right audio track/language for extraction. Please help
    Kind regards
    Alex

    This is because the OMF specification requires mono audio files
    It really depends on what you are trying to do with the two tracks as to the best answer as far as 'grouping'
    You could select all the clips on both tracks and right mouse click and select 'group'
    You could send both tracks to a bus
    You could export the two tracks to a stereo file and bring that back into the session
    Lots more things I'm sure but a little more detail as to what you are trying to do would help

  • Is it possible to flip the multiple choice quiz "radio" button from left to right of the answers?

    Hello forum,
    I am using Captivate version 6.1.0.319 on a Windows 7 desktop PC and would like to know if it is possible to flip the multiple choice quiz "radio" button from left to right of the answers. I am working on a project that uses the "Require Right to Left composer" within the Global Preferences: General settings. The captions has been switched from left to right but the quiz answer radio buttons did not. Any help would be appreciated.
    Thanks, in advance. 

    Hello and welcome to the forum,
    I'm not aware of such a possibility. A workaround could be to create your own MCQ slides, using standard objects and widgets like the radiobuttons widget (there is an enhanced version created by Jim Leichliter) and advanced actions. These articles were written for previous versions, but can give you an idea about the work involved:
    http://blog.lilybiri.com/widgets-and-custom-questions-part-1
    http://blog.lilybiri.com/extended-widgets-for-custom-mcq-and-tf-questi
    Lilybiri

  • How do I seperate the audio track from the video and save it to a CD in Premiere Elements 13?

    How do I seperate the audio track from the video and save it to a CD in Premiere Elements 13?

    Binbashi
    You can separate the audio track from video and save it to a DVD disc within Premiere Elements but not a CD disc.
    To do save to the audio to DVD disc, you do not have to separate linked audio video, just use the export Publish+Share/Computer/Audio and set Presets to the wanted format (AAC, AIFF, MP3, or Windows Waveform (WAV).
    You will not see Audio in the choices since it is at the bottom of the list of choices under Publish+Share/Computer/. You will need to use the thin scroll bar to the right of the choices to scroll to it.
    If you need information on selective export of Timeline content when dealing with more than just this one file on the Timeline, please let us know. If you are trying to produce a CD for listening in car or CD player elsewhere, please let us know.
    Looking forward to learning of your results.
    Thank you.
    ATR

  • How can i move the tool bar from left to right

    Hi People
    I was wondering if anyone knows how to move the tool bar from left to right in Adobe Illustrator Draw mobile app.
    i'm left handed and i like the tool bar to be on the right.

    Maybe you can mark your answer as the answer? I'm creating a guide on switching from Ideas to Draw so I'll make sure to add this.

  • Workflow Suggestions for Getting Multiple Audio Tracks From Drum Machine

    My goal is to make separate audio tracks from the MIDI output coming out of a hardware Boss DR-880 drum machine. It has nice drum samples that I would like to use. So far, I know how to split the output by MIDI notes as to create multiple tracks. I end up with a about 10 tracks which are all MIDI of course. What I want to do is end up with all audio tracks. This way I can set the levels and EQ to taste for each part of the drum kit.
    What's the most straightforward way to achieve this goal? I tried bouncing in place but that only works for plugins -it's grayed-out for the post note split generated MID tracks. I also found a post on this forum with what I think is similar question but it's closed and the question was not clearly answered for a newbie like me.
    So far I can do this:
    1. Record the MIDI output from the drum machine to an External MIDI track.
    2. I then split the MIDI track by note to get multiple MIDI tracks.
    3. To get audio I play each track individually e.g., just the kick drum and record the audio coming
    out of the drum machine into an audio track.
    This is a huge pain since I have on average about 10 MIDI tracks! There has to be a better way, right?
    Thanks!

    hi there:
    ok now when u want to do such a thing which i totally understand what u are trying to do !so u have these options L
    1- u should have a mixer to feed it with all your outputs from outboard gears like drum machines ,samplers etc...coz what u like in your dr-880 is the character of its sound and trust me if i tell you even if u tried to sample it and put it into any sampler software ,it will have the same sound but not the same character ! so thats why we still have samplers and out board gears and they will be still manufactured coz of that reason ...so for example i use my akai s6000 sampler which it has 16 outputs direct to my mixer so i can do what ever i want midi wise and audio wise with out any pain ,coz even if i have the same samples into my whatever sampler software i will never have the color and the character of the sound coming out from my akai ...and i use a drum machine which it has 10 outs as well and all is playing in sync in real trime with my audio tracks inside my logic ...this is the best solution !but i think u dont have that solution but u have to think about it if u bring a good console..!
    2- you don't have to divide your midi from your machine you just do what ever its need to be done and when u finish record them one by one into your logic or 2 by 2 or what ever but in this case u cant control the midi of it anymore
    but you gonna pain to do that every time coz sometime u dont have much time to think about u have to record the sound before any mix down!but it will work for you
    3- make samples by your own of your drum machine and use esx24 to play them !but again you gonna lose the character of your sound but still having the same sounds u want ( if u know how do make a good samples).
    i hope this tips gonna be useful for you .
    cheers..!:)

  • I need to know how to delete downloaded videos and movies from iTunes when the instructions on the support page does not work.  I have swiped the selections from left to right on the phone and nothing happens.

    Hello.
    I need help deleting videos, tv shows, and movies downloaded from itunes.  I have followed the instructions to delete from the macbook, I selected the videos I wanted to delete and right clicked to delete.  Nothing happens.  When I double click on the video it still starts playing.  I also followed the instructions to delete the videos from the iphone by swiping from left to right with nothing happening.  I opened the videos on the ipad and there is no edit selection like in the instructions on the support page. Can you please tell me how to permanently remove this content so it doesn't try to copy from each device when I want to back up the Iphone and Ipad to my macbook.  Thank you.

    Hi Shawninglewood,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
    http://support.apple.com/kb/HT5772
    Cheers,
    - Judy

  • How to change the direction of movement in atable from left to right?

    As the title says i want to change the movement direction in the cells of a table in pages when i click tab key from "left to right" to "right to left", is that possible?

    It seams that we aren't using the same application.
    In mine, if the cell C3 is selected, pressing shift + tab select the cell B3 which is what you wanted in your original post (or I understood it wrongly).
    If what you want is the ability to insert a new row above the current one or at top of a table, you can't do that this way.
    Same response if you want to insert a new column to the left of the table.
    To do that, the soluce is to select the top row or the leftmost column.
    There is a funny bug in the menu items.
    If your table has a header row, entering the menu Format > Table, we get four items:
    Insert new header above
    Insert new header below
    if we are in the header row
    or
    Insert new row above
    Insert new row below
    Insert a column before
    Insert a column after
    These four menus items have shortcuts :
    option up arrow
    option down arrow
    option left arrow
    option right arrow
    If the table has no header, the menu items are :
    Insert new row above
    Insert new row below
    Insert a column before
    Insert a column after
    None of them display a shortcut *_but the shortcuts are active_*
    Yvan KOENIG (VALLAURIS, France) samedi 11 septembre 2010 23:52:27

  • My screen displays a shadow from left to right, being darker on the left and brighter on the right. Any advice about how to change this would be appreciated.

    My screen from the moment it starts any program appears to be shaded from left to right. The left hand side of the display appears to be darker than the right half of the screen. Can someone please advise what I can do to alter this. Have I pressed something I shouldn,t have? Or is there a problem with my display?
    Any help would be appreciated.
    Many thanks.

    Does not sound too healthy! You should take it to the Genius bar in the Apple store. May need the hardware looked at...
    It's most probably a backlight issue. Take some piccys of it while it isnt working now!!

  • HT1600 I have an Apple TV 2nd Gen, iPad 2 and can't get the icon to appear when i swipe from left to right. What am I missing? I am able to get the 'Home sharing' 'user and password on my Mac.

    I have an Apple TV 2nd Gen, iPad 2 and can't get the icon to appear when i swipe from left to right. What am I missing?
    I am able to get the 'Home sharing' 'user and password on my Mac.
    Also using IPad 2 I am able to get the ITunes to accept the user name and same password as the Mac.
    However, the only way I can see the 'Home sharing; icon is in Music on the Ipad. When I tap on the Icon it asks for a password.
    When I give the same password, it is rejected.
    Help!!!!
    Jaxxdiggs

    Personally I think the iOS devices are poor at reconnecting  - Airplay establishes that a link is available but when the iPhone/iPad has been away from the house and rejoins the network i think AppleTV already thinks it's connected with a different IP address and fails to recognise it has joined the network again with new credentials.
    Something along those lines anyway.
    I find that a combination of restarting AppleTV, router and iOS device tends to fix it, but not for everyone.
    AC

Maybe you are looking for