Switch b/w edge and GSM on Blackberry Curve 9380

Hey few days back I bought Blackberry Curve 9380. Basically I'm new to Blackberry Universe.
Generally when I'm at home, I prefer to use GSM only coz I have Wi-Fi. But when I swtich off data usage, connect to Wi-Fi, the Browser and other internet applications say that they are unable to internet. 
Also guide me how to switch b/w GSM & edge network...
Solved!
Go to Solution.

First Your need BIS - Blackberry Internet Serives subscription from Vodafone IN, this is the unique feature which seperates other mobile devices from Blackberry.
Browser, Facebook,twitter and all other apps require BIS subscription. Only appworld will work in Wi-Fi mode.
You can change the Browser settings to Hotspot to work in wifi, but i think in OS 7 it will detect automatically.
if you have BIS subscription 3G is free.

Similar Messages

  • My blackberry Curve 9380 won't switch on

    Hi, my blackberry curve 9380 won't switch on and i have had it on charge since last night.  The red light or green light isnt on and it doesnt want to switch on even after i take the battery, sim and SD card out? It is just under a year old.  Can anyone help because i need my phone to be on urgently!!!!

    Hi and Welcome to the Community!
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain connected to a known-good wall charger (not PC USB):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain a known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • BlackBerry Curve 9380 will not power ON and the red LED light is flashing

    I need you guy's help. I was charging my BlackBerry Curve 9380 this morning. When I was about to use it the found out that the screen will not light up but the red led indicator is blinking one long blink, one ong blink then a full stop. I have already tried removing the battery and sim card for sometime but to no avail. What should I do?!

    You need to consider updating/reinstalling device OS. Check the below knowledge base article -
    KB03621 How to clean reload BlackBerry Device software and applications using BlackBerry Desktop Software
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • My BlackBerry Curve 9380 is lost/stolen

    Please help me...
    How can I track my lost BlackBerry Curve 9380 by its pin? It has been stolen and I don't know what to do.
    Note:
    I don't have BlackBerry protect account and I think the thief through away my SIM card but am sure he must not be switched off the device.

    Hello,
    Please see this helpful thread:
    http://supportforums.blackberry.com/t5/Device-software-for-BlackBerry/Lost-or-Stolen-BlackBerry-What...
    It is a pity you did not activate the FREE BB Protect app...it can be quite useful in your situation. But, like insurance, the time to prepare for this situation is BEFORE the need arises.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My Blackberry Curve 9380's screen won't turn on!

    My Blackberry Curve 9380's display screen won't turn on!  The flashing red light still appears so I guess I am still able to receive texts.  I can also receive calls; my ring tone goes off but I cannot answer!  I have to unlock it and I can't do anything on a touch screen that's virtually useless now.  I've done so many battery pulls yet it doesn't work.
    I did drop it but it wasn't very hard.  My bb fell when it was in my rubber case and the fall was around knee length (I am very short only 5'0).  My friend said its possible that the backlight broke.  If it is true, how much does it cost to repair it?  My warranty expired a few weeks ago...
    My friend also said there could be something else wrong with it.  Like a downloaded an app that had a corrupt file (this has happened to me before and the phrase "Uncaught exception java.lang.error" kept popping up every time I did a battery pull) or a programming error. I tried Jl_Cmder and I've done reset to factory.  I've even tried to wipe everything completely.  "The device will reboot to a white screen with a '507' error" this didn't happen... It did reboot but nothing can be seen.  I regret it deeply ...
    I'm sorry this is so long but please can someone help me? ): 

    Ouch, that doesn't sound good. Even though it's out of warranty, you should check first with your mobile provider for a repair estimate. 
    Sorry!
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My blackberry curve 9380 becomes worst device of my life

    I have purchased blackberry curve 9380 around two month back. it worked good  2-3 weeks but thereafter phone start hanging then it took 5 minute to take single pick ,net speed goes down and battery backup almost nil. I contacted the laxmi nagar Delhi service center many time they updated the software but problem not resolved Customer representative said to me that phone is just for calling not for using application ,even I have just 3 to 5 application installed on it. 
    Now I would like to ask to blackberry team what is use of purchasing curve 9380 
    this phone not able to handle 3 application It becomes most worst phone of my life
    please provide some solution to my problem 

    Hi ritikapal
    Welcome to the Community
    Sorry to hear about your problem but As you also known that this is just a user support forum ,here user like you and us try to help each other as much possible.
    On your Home screen Go to Options > Device > Application Management > Move your Trackpad  left or right on the screen to CPU USAGE... check which application(s) is using the CPU resorces.
    Regarding your device problem if anybody told you that BlackBerry are meant  only for calling I think he has a little knowledge about BlackBerry.Your device can handle much more application but it depends on the way we use it.pressing the menu key for a few second  will pop up a screen which will show all running programs in the background ,generally five will always there ( Home, BBM, Message,Phone , Browser ) look if any other apps. are running.
            Always try to Close Applications Correctly - Avoid using the End key to close applications as this simply minimizes the application and leaves it running in the background. Instead, press the Menu key, select the Close or Exit option to exit the application.If programs run in the background it will also lead to Battery drainage and also device hangs .Please have a look at this Article  :
      KB14320 How to maximize battery life and free memory on the BlackBerry smartphone .
    Try following those steps mentioned at the KB to see if your problem resolves.
    If problem presists try it by youself :
    1.Locate your Carrier and Download the OS you desire from here and Install it in your PC or Laptop Carriers
    (make sure you are downloading for the same model as you have )
    2. Download and install the latest BlackBerry desktop software from here BlackBerry desktop software
        Then if it allow  perform your backup of your device.
    3.Search your C: drive for Vendor.xml and delete them, there may be one or two vendor.xml ( On your Pc change your folders option to show hidden files/folders ) :
        C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
        C:\Users\Windows UserName\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
      4. Use BBSAK from  http://bbsak.org/   and wipe the device then after you get the error 507 ( no OS ) then proceed to next step.
    5. Go to C:\Program Files\Common Files\Research In Motion\AppLoader. (For 64-bit Vista or Windows 7, the path       will be C: > Program Files x86 > Common Files > Research In Motion > AppLoader) double click Loader.exe. 
    6. Follow this KB on how to Restore backup http://www.blackberry.com/btsc/KB10339
    Please try and let us know.
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Problema blackberry curve 9380

    Hola a todos. 
    Se me bloqueó mi blackberry curve 9380 y mi problema es que conseguí el código para desbloquearlo pero no puedo ingresar  a la pantalla o menú de petición de código MEP2. Alguien me puede ayudar?

    Estimado Usuario, lamentablemente este foro es solo para el idioma Ingles, sin embargo lo podemos ayudar en el foro especializado en Español, esta es la dirección donde gustosamente lo podemos atender:
    http://foros.blackberry.com/t5/Foros-de-Soporte-General/ct-p/bscf_es
    Muchas gracias
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Blackberry curve 9380 keeps crashing

    hey,
    my Blackberry curve 9380 (whcih i've had for 3 weeks) keeps crashing all the time, the loading square thingie appears and then it's stuck. after a while it even gives an error message. i tried pushing buttons, but the only solution so far is taking out the battery and re-installing it. then restart the phone (which normally takes 4 seconds but when it has crashed it takes 5 minutes...) i've installed the latest blackberry software, so that can't be it... can anyone please tell me why my blackberry curve 9380 keeps freaking out like that?
    siincerely,
    Kjaaps

    the error message, i can't give any details, since i have given my cell back to the wtore as it still is in waranty and so they will search for the errors.
    as for the loading clock, sometimes it just appears and then all of a sudden my cell blocks...., don't think that it's normal that that thing appears and blocks even when you're not using internet, or clearing cache, history, cookies etc... now i know this sounds vague and all, but since i've only had this cellphone for 3 weeks, i hadn't figured everything out.

  • About Blackberry Curve 9380 Battery Warranty

    Hi,
    I have bought a BB Curve 9380 from Sharaf DG 4 U (Mirdiff Centre, UAE) dated 30-06-12. The phone is dead now as a result of a faulty Battery. I went to the Customer Service at Sharaf DG 4 U today and they are saying that there is no Blackberry warranty for Battery from the Manufacturer.
    Guys, kindly help me out in finding a solution for this. Is it true that the BB Customers are not eligible for 6 months Battery warranty??
    Looking forward to receive your opinions,
    Regards,
    Jaimon Joseph

    Hi jaimonjoseph
    Welcome to BlackBerry Support Community Forums
    Please go through this World wide  Battery Limited Warranty .Select your country and go through the documentation regarding Battery limited warranty.
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Blackberry Curve 9380 stuck on Platform screen

    Two days ago my Blackberry 9380 randomly turned itself off and went the Blackberry loading screen and kept loading only until three quaters of the way, then stopping. I took the battery out three times and each time it did that, then it loaded and went to the 'Blackberry Platform 9.32.0.51' screen and has been there since. When I click any of my apps it says 'Error starting net_rim_bb_file_explorer:' Could you help fix this problem? Thanks.

    Try starting the device in Safe Mode.
    Article ID: KB17877 How to start a BlackBerry smartphone in Safe Mode http://www.blackberry.com/btsc/KB17877
    If you're able to startup, go to Options > Device > Applications and delete the last few third party apps or themes you might have installed.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Blackberry curve 9380 Micro SD card

    Hi all,
    I have a micro SD card with my BB curve 9380 and I would like a card with a bigger memory.
    Can I get a Micro SDHC card for my phone?
    I am not sure what the diffrence is.
    Any help welcome!Thank you.
    Melanie
    Solved!
    Go to Solution.

    Thank you for your help.

  • Randomy  connection switches between 3G, EDGE, and home WiFi

    I'm working on a Calibre/Stanza connection between my iPhone and my laptop so I can read my .lit/.mobi/.txt/.pdf/.etc ebooks all on one device: the iPhone. It's a portability and convenience thing.
    However, the connection between the two devices and their respective apps will only work over WiFi.
    My iPhone will connect to the home WiFi, alongside the laptop, no problem, but then randomly switch to 3G when I load various apps. It actually matters with the Calibre/Stanza thing because both devices must be on the same WiFi.
    I turned off 3G. The phone now switches to EDGE whenever I load the Stanza app. There doesn't appear to be a way to turn off the EDGE option in the iPhone settings.
    How do I give my phone no place to go but the WiFi? How do I turn off the EDGE bit?
    Both Calibre(laptop) and Stanza(iPhone) seem to be in otherwise perfect working order.

    You cannot force the iPhone to use 3G. While you can force it to use EDGE by toggling off 3G, your iPhone will automatically drop down to EDGE when it cannot get a good 3G connection. If you want to use only WiFi, simply place it in AIrplane Mode. Note that while in Airplane Mode you cannot receive calls or text messages.
    -SM

  • Blackberry curve 9380 and Mac

    I do not succeed in synchronizing my new MacBook Air OS X 10.9.4 with planner and address data stored on BlackBerry 9380 Curve. If I use BlakBerry Desktop for Mac, the message is "Sync Services is not active on this device. Please activate it" . But it seems to be impossible for a Mac with OS X 10.9.4. On the other hand, if I try with BlackBerry Link, I get this reply "Your smartphone must be equipped with BlackBerryu 10 software".  Which is not the software running on 9380. As a result, I'm unable to utilize 9380.  How can I fix it? 

    I do not succeed in synchronizing my new MacBook Air OS X 10.9.4 with planner and address data stored on BlackBerry 9380 Curve. If I use BlakBerry Desktop for Mac, the message is "Sync Services is not active on this device. Please activate it" . But it seems to be impossible for a Mac with OS X 10.9.4. On the other hand, if I try with BlackBerry Link, I get this reply "Your smartphone must be equipped with BlackBerryu 10 software".  Which is not the software running on 9380. As a result, I'm unable to utilize 9380.  How can I fix it? 

  • Blackberry Curve 9380 Problem running V7.1.0.714

    Hi
    I upgrade my blackberry from version 7.1.0.234 to 7.1.0.714 and now I cannot set my mobile network to 2G network with the old version has an option only 2G. Is there a way to make it stayed on 2G Only?
    Also I had a problem with my internet browser on board, While open a page it stated that a unexpected error has occur do u wish to reload the page,with the upgrade version still the same problem what can I do to solve it?

    bilal7777 wrote: 
    I upgrade my blackberry from version 7.1.0.234 to 7.1.0.714 and now I cannot set my mobile network to 2G network with the old version has an option only 2G. Is there a way to make it stayed on 2G Only?
    Hi bilal7777
                             With those higher OS releases the option only "  2G " is not available ,your device will automatically catch the signal it recieves ,you can set it to " 2G & 3G " it will do the same as it was before.
    bilal7777 wrote:
    Also I had a problem with my internet browser on board, While open a page it stated that a unexpected error has occur do u wish to reload the page,with the upgrade version still the same problem what can I do to solve it?
    Are you getting this error regularly or on specific websites.Try clearing your device Browser data at a regular interval if you are a heavy user and also a battery pull restart occasionally. To clear browser data Open Browser > Press the Menu Key > Options > Scroll down to " Clear Browser Data " ( Mark all field ) then hit Clear Now .Then perform a battery pull restart like this device POWERED ON remove the Battery wait a min. then re-insert it back.
    Try it and see if problem resolves.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Data usage in BlackBerry Curve 9380

    I am on a 250Mb allowance contract but don't know how to check how much data I have used so far. I am on Orange and I spoke to an advisor who said its best to reset the counter every month but I cant seem to find the counter. Any help??

    Hello Weezy12, 
    Welcome to the forums. 
    You can see the life time data usage by doing the following. ***Note*** This number cannot be reset and you should any you should always rely on your wireless service provider for the most up to date and accurate information. 
    Go to Options - Device - Device and Status Information Once on this screen type buyr
    You will see a new field at the bottom that will show your total data usage since the device was purchased. You will need to note this number on the first day of your billing cycle every month to get an idea of how much data you are using. 
    Hope this helps. Have a good day. 
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Maybe you are looking for

  • MAP with Shipment Costs and Import Duties

    Our company orders raw material from foreign companies and we need to include the cost of shipping and import duties for the raw material in the moving average price of the raw material when entered into the system? Can this be automated? How can thi

  • ASM file layout report

    is there a way to report how ASM layedout is datafile on which disks? I understand that asm strips its datafiles and evenly distributes the file (1mb) to its disks. I would like to have a report on this distribution ratio. any help would be appreciat

  • Adobe Acrobat 8.1.2 Pro Print to PDF problem

    We are trying to us the print to PDF method of PDF creation. In the past you were able to select the PDF job options from under the apple print menu and in the PDF options section. When used under Illustrator or Indesign this would also allow you to

  • HT201210 The iphone could not be restored. An Unknown error (-1) occurred How do I fix this problem

    Have tried to sync the phone and update the software on my iphone3G. After clicking on the update button and the register button after that. I get the message "The iphone could not be restored. An Unknown error (-1) occurred" How do I fix this proble

  • Canon PIXMA MP600

    Hi! I apologize for my English. Windows 7 x64. When trying to scan the following error: The driver is the most recent. Tried to change USB 2.0 and USB 3.0. The error occurs while using the application MP Navigator 3.0, as well as run a scan directly