Switch between 2 numbers to make outward calls

I have 2 skype numbers - one for Ireland and one for UK, both linked to the same account and for business purposes. If i want to call Ireland i want to use the Irish number and to call the UK i want to use the UK number. Firstly, is there any difference in the charges or does it not matter which number is used. Secondly, for caller ID i want the UK customers to get the UK number etc. Therefore, how do i switch beween the numbers when making outward calls. Thanks

Hi, limbodan,
I still have not described how this works well; please forgive me.
Skype Numbers are for receiving incoming calls only.
People who wish to call you, who are not using Skype, will decide which number they want to use, if you have provided both numbers to them. You will receive their call on Skype, as if they were on Skype, too.
You can call out anywhere, using your credit (or a subscription) to pay for toll charges and connection fees.
Does this help clarify better?
Best regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Similar Messages

[Z87 MPOWER] Monitor doesn't detect Video. LED-POST switches between numbers

Hey folks!
I build my first PC yesterday and sadly I came over a seemingly unsolvable problem. I made a test-run with the Motherboard on the box, GPU, PGU, RAM, CPU+Cooler. I started it and everything worked fine, but the Monitor doesn't detect graphic input! It detects the cable I uses (HDMI and AVG) AND that I plugged it into a PC, but it just switches into sleeping mode as soon as I start the PC! (The Monitor works fine on my laptop).
Now I removed the GPU and used the onboard graphics with HDMI connection - the same problem! Now, I only have one 8GB-RAM stick, and I switched it between all 4 slots just to be sure - nothing. I double-checked the two PGU cables I have connected (8pin and 24pin ATX) - everything seems fine!
I just can't find the problem and its driving me insane! The only thing that says that something might be wrong is this little LED thing on the mb, it switches between 10 / 19 / 15(I think, its to fast to see!) / 55 endless! That's definitely not normal is it?
Is someone able to help me? I don't want anything more right now than getting this working.
SPECS:
CPU: Intel Core i5-4670K 3.4GHz Quad-Core Processor
Cooler: Cooler Master Hyper 212 EVO 82.9 CFM Sleeve Bearing CPU Cooler
Motherboard: MSI Z87 MPOWER ATX LGA1150 Motherboard
RAM: Kingston 8GB (1 x 8GB) DDR3-1600 Memory
Asus GeForce GTX 770 2GB Video Card
PGU: SeaSonic 520W 80+ Bronze Certified Semi-Modular ATX Power Supply
Also if nothing works, can someone tell me what part might be the fault, so I can switch it in?
THANK YOU!

You may be able to repair this.
Remove the cpu and inspect the socket with a bright light and magnifier.
Fine the culprit pin and straighten it if possible. If not just RMA the board.

Use of iPhone 5s keypad switching between numbers and alphabets

Hi! I am using iPhone 5s. Whenever I speak on Interactive Voice Reponse (IVR) system , I am having a difficulty
to press alphabets in the Phone Keypad. For e.g. If I have to check flight status, the call centre asks me
to enter flight number which is alpha-numeric, like 6E 286. In the phone keypad the alphabets are
visible just below the number key--like under number "2" , alphabets "A B C" are visible; but I don't know
how to enter alphabets in between the numbers using the number in the keypad.
Can anyone guide me please?
Thanks in advance
J.SRIDHARAN

A= 1 tap on the 2 key
B= 2 taps on the 2 key
C = 3 taps on the 3 key.
However, many IVR systes are smart enough to figure out what you mean even with one tap. It all depends.

I cannot make or receive calls suddenly. Ihave tried to power off and on and when I type in the numbers to make a call, nothing happens.

I cannot make or receive calls suddenly. The message bar shows 'searching' continuously without the WiFi symbol nor the LTE. Ihave tried to power on and off without success.
Any ideas?

Could be a power outage in your area.
YOu will need to contact your cell phone provider.

How to make my application programmatically switch between English and Russian

Greetings from Colorado...
My application needs to be switchable between English and Russian. Future languages to add are Spanish and Chinese. The user selects a language
from a control before starting the program and then the program changes the Captions, Boolean Texts, Graph Labels, and Enum Type Strings to the
chosen language. For Russian, this requires a different set of characters. I have made substantial progress by:
Control Panels>Region and Language>Keyboards and Languages>Change Keyboards added Russian>Keyboard>Russian on my development
computer.
In the LabVIEW.ini file, I added UseUnicode=TRUE (thanks to a suggestion found in this forum)
Made property nodes for controls and used properties such as Interpret As Unicode (True for Russian, False for English), Text, Font Name, Font Size, etc.
I have used fonts Arial and Arial CYR for Russian and MS Sans Serif for English
Set the keyboard for Russian and enter Cyrillic characters into text constants that are set for Arial or Arial CYR font. Sometimes one works and
sometimes the other works. As long as I set the font name in the property node the same way the text went into the text constant, it generally
works. I wish I could understand why one works sometimes and the other works other times!
I have had trouble with the Boolean Text going off-center when changing fonts and languages and it seems that by setting the Lock Text In Center
property to False and then True again, it seems to work. Often changing Boolean texts between short and long texts causes some of the long text
to be non-displayed; I have remedied this by explicitly setting the width of the Boolean text in a property node.
Often, the Russian text appears as gibberish with strange right-angle characters, :s, =s, and tiny numbers. I have been able to remedy this on my
development computer by ensuring that the text constant on the block diagram has the same size as the caption is supposed to have. This
is not necessary for normal programming in English, but it seems to help here. But it doesn't always solve the problem.
Sometimes the English text appears as Chinese gibberish in an Enum Type selection list or in a graph label. On my development computer,
it seems that making the text the last property to change helps here.
By changing the sequences of assignments to a single property node with a long list of properties, I have been able to make some of these
controls to switch between languages without gibberish showing up.
A few hours ago, I had the Russian strings in the Enum Type control working, except that when selecting from the available items, only the first
word of the Russian string was displayed. Two of the items start with the same word, so the user can't distinguish them.
At that time the English strings were appearing as Chinese gibberish while the list during the selection process displayed in English. As soon
as I changed the selection, future attempts to change the selection gave Chinese gibberish during the selection process, too. But this was only
a problem in the executable version; the source-code version worked fine.
In an attempt to get rid of the Chinese gibberish, I made new constants and retyped the items into them. This worked! But then, the Russian
stopped working and gave gibberish angles and tiny numbers, even though I didn't touch any of the code that sets the properties in Russian mode.
After trying a few sequences of setting the properties for the graph X label on page 2 of my tab control, this label started working correctly for both
languages. But the text of that label comes through on page 1 of the tab control, partly obscured by other controls on that page. After the
program runs a few more seconds, these shadows disappear.
Most times I restart LabVIEW, I get an error message saying there was a crash due to fontmgr.cpp, line 7494. But there actually wasn't a crash.
My computer has Windows 7 64-bit. Deployment Computer has Windows 7 32-bit. LabVIEW version is 8.5.
I have probably 50 or 100 more controls and indicators to change to language programmability and figuring out all this stuff for each one is
terribly time-consuming and there is no assurance that all of them will ever work.
At this point, I'm hoping that I am on an entirely wrong path and someone will send me a clue to get me on a path that is more predictable.
Thanks in advance to all who post ideas!
Cheers
Halden

Hi All,
I've made a lot of progress on this translation, but it's been really hard. There are lots of weird things going on that must be logical because they're in a computer, but I can't figure out what the logic is. When changing a font on a caption using the front panel, it sometimes changes the font on the caption and sometimes doesn't although the indicator always indicates the new font. Removing the first character of the unicode font string being sent to the caption seems to help...huh? Anyway, tabs still can't change language programmatically, and niether can ring controls (some kinds will take the new list of strings, but when selecting, they only display the first word of the string!). Boolean text can be reprogrammed, but only if the boolean text is set to be the same for both true and false states. When reprogramming captions on a non-displayed page of a multi-page tab-controlled user interface, the new text appears on the current page until I change pages back and forth. What a pain!
Sooo, NI....does LabVIEW 2011 have support for unicode fonts? Or, is there anything else in the new control style that will support programmatic language changing?
Halden

Switch phone numbers between 2 different sized SIM Cards?

I have an HTC One and my dad has an iPhone 5. I want to switch phones with him but the iPhone 5 has a nano sim and the HTC One has a micro sim. Is their a way i can just switch phone numbers on the sim card? for example I have my phone number on my can I transfer it to my dads? and vise versa.

Contact your carrier to have them give you appropriate sized sim cards with the correwct numbers and services.
Alternatively, you can cut the larger sim card down to the correct size, and place the smaller sim card in an adapter to make it larger.
Sim Card Adapters
But contacting your carrier would be the better option.

I have a iPhone 5 and I am not able to toggle between the show my caller Id option on and off. How can I do that ??? It always shows greyed out and also because of which I am not able to make outgoing calls. So please help

I have a iPhone 5 and I am not able to toggle between the show my caller Id option on and off. How can I do that ??? It always shows greyed out and also because of which I am not able to make outgoing calls. So please help

Not all carriers allow that to be set using preferences in the phone. Contact your carrier.

I'm using apple's bluetooth keyboard and I need an easy way to switch between the text and numbers fields instead of tapping on the screen

I'm using apple's bluetooth keyboard and I need an easy way to switch between the text and numbers fields instead of tapping on the screen

While not in edit mode:
- if start typing numbers, then it enters number mode.
- if start typing text, then it enters text mode.
Using the arrow keys exits edit mode. So this should work for you:
1 Type text into a cell, which enters text mode.
2 Press Return to move to the next cell.
3 Press right arrow key to exit edit mode.
4 Press left arrow key to get back to the cell.
5 Type a number, which enters number mode.
Another method that requires more planning ahead of time is to format the cells as text or number before starting the data entry. Then when you navigate to a cell while in edit mode, you will be in the appropriate mode (without having to exit edit mode).
This all works fine for me. Hopefullly it does for you also.

Duet makes noise after switching between finder audio and Logic

Hi
My Duet makes noise after switching between "finder audio" and "Logic", In other words i would play a mp3 in the finder and when returning to Logic all my audio sounds like the "lo-fi" RTAS free plug digidesign gives away now.
This is happening on a White *iMac 24"*
Model Name: iMac
Model Identifier: iMac6,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: IM61.0093.B07
SMC Version (system): 1.10f3
MacOsx 10,5,7

Does this happen every single time? The same thing happens to me every once in a while. I just close Logic and Maestro and unplug the Duet. Then, in this order, plug in the Duet, wait for it to click, load Maestro, load Logic. Works every time.
Edit: It does only seem to happen when I switch from Logic and the audio output from the Duet to internal and then come back quickly. I don't think it's an issue with the Duet hardware itself.
Message was edited by: AecDuck

My facetime starts connecting then fails to make the call ? ive tried the swtiching face time off switching macbook off then switching it back on the logging back in to facetime but still no joys. any help ?

my facetime starts connecting then fails to make the call ? ive tried the swtiching face time off switching macbook off then switching it back on the logging back in to facetime but still no joys. any help ?

my facetime starts connecting then fails to make the call ? ive tried the swtiching face time off switching macbook off then switching it back on the logging back in to facetime but still no joys. any help ?

Siri's voice just says everything that i touch. The voice says the numbers i touch but the numbers dont show up on the screen so i cant make phone calls! what is going on??

Siri's voice just says everything that i touch. The voice says the numbers i touch but the numbers dont show up on the screen so i cant make phone calls! what is going on??

It sounds as if you have Voiceover activated. You should be able to turn it off by triple tapping the Home button.

Can I switch phone numbers between two iPhones?

I have ordered a 3GS, replacing my wife's 2G model. She will now get my 3G model. Do we have to change phone numbers or is there a way to move my 3G number with the 3GS and vice versa. It would be much better if that was possible.

I also wish to switch phone numbers between phones. I just got off the phone with AT&T customer support. You can handle this over the phone. Need to have the two phones in hand at the time. I got through to customer support today with less than one minute on hold. I was quite surprised. AT&T must have really staffed up for the release.

If I'm connected to my home wifi , and I make a call does it still connect to my wifi ro does it switch to my provides wifi .

If I'm connected to my home wifi , and I make a call does it still connect to my wifi or does it switch to my provides wifi .
Thanks for helping

Your call will be made over your cell signal, not wifi, unless its facetime.

HT1473 I recently update my iphone and now is not allowing me to access my contacts, emails etc. When I try to switch it on it has an itunes symbol on the front with the usb plug and an arrow. What do I do to get my contacts etc back and make phone calls?

I recently update my iphone and now is not allowing me to access my contacts, emails etc. When I try to switch it on it has an itunes symbol on the front with the usb plug and an arrow. What do I do to get my contacts etc back and make phone calls?

To be more clear:
Was you phone hacked/jailbroken BEFORE you hooked it up?

When I switch between calls, how can I put some mu...

Hello.
When I switch between calls, how can I put some music to the person that is wainting.
I have a N70. And, frequently when I have a call somebody calls me. What I use to do is to put one of then in hold while I'm finishing one of the calls.
I would like to put music playing to the person that is wainting/ is holding the call.
Is it possible?
Marco

I don't think it's possible to keep sending audio while a call is on Hold.
So I don't think you can do that.
640K Should be enough for everybody
El_Loco Nokia Video Blog

Switch between 2 numbers to make outward calls

Similar Messages

Maybe you are looking for