Switch between % and px

It would be great to have a shortcut that would convert positioning of the object from % to px and vice versa. Ideally would be good to choose if you want the default value to be % or px when adding new objects.

There is a way in the properties inspector to quickly convert values. The suggestion about setting the defaults is a good one. You should file an idea for that. To convert existing value you need to mouse over the value and a white triangle will show up in the field. You can click on that and get a units menu to swtich the equivalent unit.

Similar Messages

7344 servo motion switching between open and closed loop operation

I have a custom end-of-line test system presently using a 4-axis 7344 servo controller to perform various functional tests on small, brushed DC motors. The system is programmed in C/C++ and uses flex motion functions to control the motor during testing. Motors are coupled to external encoder feedback and third party PWM drives running in closed-loop torque mode from an analog command signal. The system uses all four motion axis channels on the 7344 board to independently and asynchronously test up to four production motors at a time.
In closed-loop mode, the system runs without issue, satisfying the battery of testing protocols executed by this system. I now have a request to add additional test functionality to the system. This testing must be run in open loop mode. Specifically, I need to use my +/- 10v analog output command to my torque drive to send different DAC output levels to the connected motor.drive while monitoring response.
I do not believe the flex motion library or 7344 controller includes functions to easily switch between open and closed loop mode without sending a new drive configuration. I am also under the impression that I cannot reconfigure one (or more) servo controller axis channels without disabling the entire drive. As my system runs each axis channel in an asynchronous manner, any requirement to shutdown all drives each time I change modes is an unworkable solution.
I am open to all ideas that will allow asynchronous operation of my 4 motor testing stations. If the only solution is to add a second 7344 controller and mechanical relays to switch the drive and motor wiring between two separately configured servo channels, so be it. I just want to explore any available avenue before I place a price tag on this new system requirement.
Bob

Jochen,
Thank you for the quick response. The 7344 board does an excellent job running my manufacturing motor assemblies through a custom end-of-line tester in closed loop mode. A portion of the performance history and test result couples the motor through a mechanical load and external shaft. The shaft is in contact with a linear encoder that closes my servo loop.
My new manufacturing requirement is to also sample/document how the small DC motor behaves in open loop operation. Your solution is exactly what I need to perform the additional functional tests on the product I am manufacturing. I see no reason why this cannot work. I was originally concerned that I would need to reinitialize the 7344 board after changing axis configuration. Initialization is a global event and impacts all four channels on the 7344 board.
Using flex_config_axis() to change axis configuration on a single channel without disturbing other potentially running axis channels will solve my concern. It will be several weeks before I can return to the manufacturing facility where the 7344-based testing machine is located. I will update this thread once I verify a successful result.
Bob

Can I have two or more JVMs in one mashin and switch between them?

Hi all,
I want to have two JVMs in one mashin and switch between them via a httpListener. If I can, could you please guide me to do it?
Thanks in advance,
Orod Semsarzadeh

may be my question is not fully clear. I mean, I want to have an bottun in my JSP when I click on it, 1 thread will be created and work in another JVM.

Graphic distortion when switching between external and built-in display (rMBP)

Recently (within the past two weeks or so) I've noticed a strange issue when switching between my external display (Thunderbolt) and my built-in display on my 15" rMBP. The following issue seems to be specific to Photoshop CS6.
Typically, I'll have a PS document open on my external display and I'll wind up taking my to another location. If I close the PS document while on my built-in and then re-open it, I get all kinds of distortion and pixellation. Closing out PS and reopining, restarting, logging on/off; none of it seems to work. It seems like the issue is with the PSD itself, but it doesn't make any sense to me. Any ideas? Screenshot: http://i.imgur.com/iCipSc7.jpg

Do you have intel gpy as well as other graphic card? You may be viewing document on different gpu's. PS does not like multiple gpu's.

How to make my application programmatically switch between English and Russian

Greetings from Colorado...
My application needs to be switchable between English and Russian. Future languages to add are Spanish and Chinese. The user selects a language
from a control before starting the program and then the program changes the Captions, Boolean Texts, Graph Labels, and Enum Type Strings to the
chosen language. For Russian, this requires a different set of characters. I have made substantial progress by:
Control Panels>Region and Language>Keyboards and Languages>Change Keyboards added Russian>Keyboard>Russian on my development
computer.
In the LabVIEW.ini file, I added UseUnicode=TRUE (thanks to a suggestion found in this forum)
Made property nodes for controls and used properties such as Interpret As Unicode (True for Russian, False for English), Text, Font Name, Font Size, etc.
I have used fonts Arial and Arial CYR for Russian and MS Sans Serif for English
Set the keyboard for Russian and enter Cyrillic characters into text constants that are set for Arial or Arial CYR font. Sometimes one works and
sometimes the other works. As long as I set the font name in the property node the same way the text went into the text constant, it generally
works. I wish I could understand why one works sometimes and the other works other times!
I have had trouble with the Boolean Text going off-center when changing fonts and languages and it seems that by setting the Lock Text In Center
property to False and then True again, it seems to work. Often changing Boolean texts between short and long texts causes some of the long text
to be non-displayed; I have remedied this by explicitly setting the width of the Boolean text in a property node.
Often, the Russian text appears as gibberish with strange right-angle characters, :s, =s, and tiny numbers. I have been able to remedy this on my
development computer by ensuring that the text constant on the block diagram has the same size as the caption is supposed to have. This
is not necessary for normal programming in English, but it seems to help here. But it doesn't always solve the problem.
Sometimes the English text appears as Chinese gibberish in an Enum Type selection list or in a graph label. On my development computer,
it seems that making the text the last property to change helps here.
By changing the sequences of assignments to a single property node with a long list of properties, I have been able to make some of these
controls to switch between languages without gibberish showing up.
A few hours ago, I had the Russian strings in the Enum Type control working, except that when selecting from the available items, only the first
word of the Russian string was displayed. Two of the items start with the same word, so the user can't distinguish them.
At that time the English strings were appearing as Chinese gibberish while the list during the selection process displayed in English. As soon
as I changed the selection, future attempts to change the selection gave Chinese gibberish during the selection process, too. But this was only
a problem in the executable version; the source-code version worked fine.
In an attempt to get rid of the Chinese gibberish, I made new constants and retyped the items into them. This worked! But then, the Russian
stopped working and gave gibberish angles and tiny numbers, even though I didn't touch any of the code that sets the properties in Russian mode.
After trying a few sequences of setting the properties for the graph X label on page 2 of my tab control, this label started working correctly for both
languages. But the text of that label comes through on page 1 of the tab control, partly obscured by other controls on that page. After the
program runs a few more seconds, these shadows disappear.
Most times I restart LabVIEW, I get an error message saying there was a crash due to fontmgr.cpp, line 7494. But there actually wasn't a crash.
My computer has Windows 7 64-bit. Deployment Computer has Windows 7 32-bit. LabVIEW version is 8.5.
I have probably 50 or 100 more controls and indicators to change to language programmability and figuring out all this stuff for each one is
terribly time-consuming and there is no assurance that all of them will ever work.
At this point, I'm hoping that I am on an entirely wrong path and someone will send me a clue to get me on a path that is more predictable.
Thanks in advance to all who post ideas!
Cheers
Halden

Hi All,
I've made a lot of progress on this translation, but it's been really hard. There are lots of weird things going on that must be logical because they're in a computer, but I can't figure out what the logic is. When changing a font on a caption using the front panel, it sometimes changes the font on the caption and sometimes doesn't although the indicator always indicates the new font. Removing the first character of the unicode font string being sent to the caption seems to help...huh? Anyway, tabs still can't change language programmatically, and niether can ring controls (some kinds will take the new list of strings, but when selecting, they only display the first word of the string!). Boolean text can be reprogrammed, but only if the boolean text is set to be the same for both true and false states. When reprogramming captions on a non-displayed page of a multi-page tab-controlled user interface, the new text appears on the current page until I change pages back and forth. What a pain!
Sooo, NI....does LabVIEW 2011 have support for unicode fonts? Or, is there anything else in the new control style that will support programmatic language changing?
Halden

When frequently switching between mobile and desktop view

When I frequently switching between mobile and desktop view I have to open the layers every time since they get closed/collapsed. Adobe may need to fix it for the next version.

You can use CTRL+# to switch between Code and Design View.
By the way, this is the Dreamweaver Application Development forum which deals with questions about using server-side scripting languages like PHP or ColdFusion. General Dreamweaver questions should be posted in the regular Dreamweaver General Discussions forum.
And while I´m at it: please use descriptive headlines such as "how to switch between Code and Design View" for your posts -- mentioning your screen name "Goula129" is not helpful to other users.

How to quickly switch between straight and curly quotes?

I've recently moved from a Windows XP machine with MS Office to a Mac Pro with Pages.
For the kinds of documents I typically work on, sometimes I need to have straight quotes, and sometimes curly quotes. With MS Word, I was able to create a couple of macros that would switch these preferences for me. With these macros linked to an icon in the toolbar, switching between straight and curly quotes was as easy as clicking a button.
Now I'm looking for a way to do this -- or something like it -- with Pages.
I know how to switch back and forth using the preferences menu, of course, but I'm looking for something quicker and simpler, since I often have to make this change several times a day.
Can Automator do something like this? Or is there another way?
-- Eric

Turn off the auto correction and you can type Curly quotes with:
left single ‘ option ]
right single ’ option shift ]
left double “ option [
right double ” option shift [
If you want the French quotes « and » they are option and option shift |
Peter

We have two ipads in the house and sync on one computer. How do we switch between apple id s

We have two ipads in the house with separate apple IDs. How do we switch between these on the only laptop in the house

On your iPad go to Settings>iTunes & App Store
Tap on the Apple ID shown and select log out.
Regards,
Steve

Can i set up two emails accounts on the mail function tab and switch between them

I would like to be able to set up two email accounts on the mail tab on the Iphone 5 and switch between them, is this possible?

Yes it is possible to set up multiple accounts but you cannot switch between them in the mail app. What you can do in settings/mail etc is have one set as active an dthe other as inactive and you can change that from time to time if you want

HT201272 Can't download any apps. I have 2 itunes accounts, and happened to switch between them, now neither works.

I can't download apps from appstore. I have 2 itunes accounts and happened to have switched between them last night, now neither works. Someone broke into my original account and racked up charges, Apple closed it for me and suggested I open a new one,which I did, then they reinstated the original account. Some apps need to go to the second account to update since I had to resort to the new account while Apple took several months to figure out what happened, so I am stuck switching on occassion to update apps. When I went back to the primary account, I cannot download anything. I tried quitting both accounts, but nothing works. Help please!

Hello there, Gwald.
The following Knowledge Base article offers some great recommendations for troubleshooting your issue:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Specific to iPad are the following:
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

HT5392 How can I use an Action List to re-order my layers in iAd Producer? It looks like there's a tool for this, but I can't figure out how to use it. I want to use a button to switch between a text field and a drawing pad layer.

I am working on an iBooks Author Widget and want to allow the user to switch between drawing-pad functions and a text field on screen. I'd like to create an action that will automatically re-order the layers so that the text field is accessible when typing but covered when writing by hand. Then, I'd like the opposite to be available, so that the text field is accessible when typing, but the drawing pad is left alone.

Have you tried using the selections in the Encore menu viewer that show you selected and activated states?

Can't switch between fill and outline.

Here's the problem: I'm on an iMac, new, trying to use illustrator CS5. after using CS3 for a few years. In CS5, if I draw a shape, flat, in the illustration, then try to give it an outline, or change the outline, or do anything with the outline, I can't. If I click on the Shape tools in the toolbox and draw out an oval, for example, I can switch between outline and fill without any problems. Select shape, go to toolbox, select curved arrow for switching from one to the other. That's it. But if I draw a freehand shape, then try it, i can't do it. THIS IS A BIG CHANGE FROM PREVIOUS VERSIONS OF THE APP. GET IT? What is the problem? If it's something I have done, fine, tell me and I'll fix it. I tried calling Adobe support in Bangalore, and it took 30 minutes just to get the problem thoroughly appreciated by the techies. They just couldn't get the idea for half an hour! I had to go over it 4 or 5 times. And they couldn't come up with an answer. they were no help at all. I'm hoping the forum will yield better results. This is pathetic, guys. Your 90-day tech support is a worthless piece of crap, guys. The only tech support we have is this catch-as-catch-can forum. I've been using Illustrator since 1987, (illustrator 88) believe it or not, it's true. And I've always been able to get tech support to cure the ills. Not any more. Is that the way Adobe plans to offer tech support? if there were a way to contact Adobe Tech Support by going around Adobe Bangalore, i would use it. But, alas, I am stuck with this.

Dear Monika and Mylenium: I figured out part of the problem, but not the solution: The shape I had drawn -and coudn't switch between fil and stroke on-is one I had already done a gradient mesh on, too. I had later abandoned the gradient mesh by using the option key to delete mesh lines, but that didn't take the shape all the way back to its original flat state. So it wasn't a plain drawn shape any more. So how do I release the gradient mesh to get back to a flat shape? I'm also having trouble keeping the shapes in RGB or CMYK mode-they keep defaulting back to greyscale. Could that also be a symptom of using gradient mesh? Note: I'm using gradient mesh for the very first time now; I've never used it before. It seems to leave a lot of unexpected baggage behind. I would send a screen shot, but if I start up Grab or Voila, all the AI pallets go away, and that's half the information. So how do I control gradient mesh?

Why will Firefox allow me to have multiple tabs available, but not allow me to switch between tabs, and can only look at a new tab by closing the previous one?

Whenever I open a new tab, it appears on the tab bar where it should, but if I click on it nothing happens, the tab won't open, and I can't switch between multiple tabs. The only way to get to a new tab is to close the one I am currently on, and even then it will only open the next tab in order of precedence, so I can not even choose which tab is the next to view. This problem is making it impossible to use firefox as a research tool which requires fast switching back and forth between multiple tabbed pages simultaneously.

'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Is it possible to install Lion on the second hard disk on my Mini (2010) Snow Leopard Server, and switch between Lion and Snow Leopard? I like those voices Lion has in speech.

Is it possible to install Lion on the second hard disk on my Mini (2010) Snow Leopard Server, and switch between Lion and Snow Leopard? I like those voices Lion has in speech.

When baltwosaid NO emphatically, that was described as CORRECT ANSWER. Ditto in the caeses of the radically different answers from Camelotand Matt Clifton
Could it be that CORRECT ANSWER needs better defining by Apple?
That apart, yes, switching might involve rebooting. About the voices, well, I was the other day adding voice to a commentary in a video I was working on. There's only American English accent in SL — Lion I believe has British ones as well.
Why not, I wondered, try to install Lion purely for academic interest, maybe with an SD card (Sandisk Ultra II, 16GB) as Tom Nelson says is possible at http://macs.about.com/od/macoperatingsystems/ss/Perform-A-Clean-Install-Of-Os-X- Lion-On-Your-Mac.htm

Boot camp and switching between OS's

I haven't made a partition from Boot camp yet but am planning to for vista for certain apps which don't have a mac version. My question is that I was under the impression, from I think the WWDC Keynote, that the new boot camp would allow the user to switch between Windows and Mac OS X without restarting the computer, but through putting one side to sleep and then waking or booting up the other (it wouldn't allow them to run simultaneously but at least you wouldn't have to restart every time). As far as I can tell no one is able to do this yet. Are they still going to add this feature in to boot camp or Leopard? Or is it already there and I don't know where to look? Or am I just going bonkers and imagining things?

I'm well aware that boot camp won't run two OS's simultaniously. But I was under the impression from a Keynote before it was released that the new bootcamp would allow you to switch between the two OS's _without restarting_. There are differences between simultaneous usage and switching without restarting. And no VMWare and Parallels will not cut it for what I will be doing (boot camp is a far better choice for my use). Just to clarify I can live with restarting to get to one side or the other but I'm just asking if it were possible in boot camp to switch between without restarting yet, as I remember being mentioned before Leopard was released.

Switch between % and px

Similar Messages

Maybe you are looking for