Switch between headset jack and internal speakers?

How can I switch from "Rear Panel 3.5 mm Jack" to the internal speakers, "ATAPI Internal ATAPI Jack" without unplugging the 3.5mm headset?  Does anyone know? 
I have a Windtop 2400 and it has Realtek HD audio ACL888S.  I looked at the specs on Realtek's website and as far as I could see this is possible in the hardware, but can the software trigger this?

Great, you fixed it!
It looks like the msi gaming control center should be bundled with WMIHookBtnFn, but it's not. This "utility" by now it's almost useless, only the Wifi and camera switch worked.
A detailed explanation of what I did here if someone has the same issue:
-> I looked in msi support-downloads http://www.msi.com/support, selected my  and went to "Exclusive downloads"
-> http://event.msi.com/aio/sw/ In there I just downloaded the msi gaming control center
-> But! when I wanted to install it, he told me that it would update WMIHookBtnFn and when he tried he'd say it's already updated.
-> Solution: Uninstall WMIHookBtnFn and re-run the installation program. Then it says to install the gaming control center.
-> Reboot the computer
-> And that's it, it should work. You can change the display's configuration, "share internet connection", change microphone/speakers volume and switch wifi, camera and supercharger on off and.. switch between speakers and headphones! *yay!*
-> I tried installing the last version of WMIHookBtnFn again, and it says that it will upgrade the Gaming Control Center. And then tries to execute a "Gaming Control Center.msi" that should be found in the extraction folder of WMIHookBtnFn but it's not.
Thank you very much again, Mog!

Similar Messages

  • How do I play audio from my headphone jack and internal speakers?

    How do I play audio from my headphone jack and internal speakers at the same time ? I have a splitter for my audio jack so that when i connect up my second monitor I can have it so it also plays audio as well as anything else i have connected into the jack but how do i let the internal speakers emit sound at the same time?

    Hello,
    If you mean the internal speakers in your Mac, you can't play audio through them at the same time you have anything plugged into the headphone jack. When you plug something into the headphone jack, it disconnects the internal speakers.

  • Audio jack and internal speakers not working!

    So my internal speakers no onger work and when I put in my Apple iPhone earphones there is a high pitched sound and they become very hot to the touch. This happened when they were in my ear, not cool. I love my computer and I would hate to give it up for a German keyboard (I bought my computer in NYC and now I live in Switzerland) or not having it for an extended period of time. Comments? Suggestions? Help? Scheisse!

    hi neuroanatomist,
    thx for your suggestion
    I read about it, but it doesn't really work for me (or maybe I wasn't able to have it work)
    So there is no actual fix to this?

  • Duet makes noise after switching between finder audio and Logic

    Hi
    My Duet makes noise after switching between "finder audio" and "Logic", In other words i would play a mp3 in the finder and when returning to Logic all my audio sounds like the "lo-fi" RTAS free plug digidesign gives away now.
    This is happening on a White *iMac 24"*
    Model Name: iMac
    Model Identifier: iMac6,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.33 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 2 GB
    Bus Speed: 667 MHz
    Boot ROM Version: IM61.0093.B07
    SMC Version (system): 1.10f3
    MacOsx 10,5,7

    Does this happen every single time? The same thing happens to me every once in a while. I just close Logic and Maestro and unplug the Duet. Then, in this order, plug in the Duet, wait for it to click, load Maestro, load Logic. Works every time.
    Edit: It does only seem to happen when I switch from Logic and the audio output from the Duet to internal and then come back quickly. I don't think it's an issue with the Duet hardware itself.
    Message was edited by: AecDuck

  • My 3GS keeps switching between iPhone speaker and Dock connector and I don't know how to keep it on iPhone speaker

    My 3GS keeps switching between iPhone speaker and Dock connector and I don't know how to keep it on iPhone speaker so I can listen to my music and games.  Is it hardware or software problem?

    I was told by a friend that sometimes when you use a 3rd party charger that the connectors are not the same size and so it can affect the sensors in the phone and make it seem like it is in a docking station and so changes the output for dock speakers.  With that said, I didn't take my pohone in to be serviced at the appple store because it was a 3GS and over 2 years old and so not covered by any service plan.  Since then my phone is back to normal and I can use my headphones and listen with the speakers on the phone.  I stoped using the suspected cheap 3rd party charger and maybe that's what did it, but not sure if it was or wasn't the cause of my problem.  I'm glad that my phone is better I was kinda holding out for the Iphone 5 when i comes out later and hope my phone lasted until then.

  • I'm using apple's bluetooth keyboard and I need an easy way to switch between the text and numbers fields instead of tapping on the screen

    I'm using apple's bluetooth keyboard and I need an easy way to switch between the text and numbers fields instead of tapping on the screen

    While not in edit mode:
    - if start typing numbers, then it enters number mode.
    - if start typing text, then it enters text mode.
    Using the arrow keys exits edit mode. So this should work for you:
    1 Type text into a cell, which enters text mode.
    2 Press Return to move to the next cell.
    3 Press right arrow key to exit edit mode.
    4 Press left arrow key to get back to the cell.
    5 Type a number, which enters number mode.
    Another method that requires more planning ahead of time is to format the cells as text or number before starting the data entry. Then when you navigate to a cell while in edit mode, you will be in the appropriate mode (without having to exit edit mode).
    This all works fine for me. Hopefullly it does for you also.

  • Switching between page layout and word processing

    I can't seem to switch between page layout and word processing view.  I've read all the posts on this and still can't figure out why I can't just type a document into Pages.  The only option I have in page layout view is to type into text boxes, which is not what I want.  I just want to type a letter for crying out loud.
    Before I get all the rants about reading User Guides, etc.  *I have*.  I've also searched on here and in-app help and just don't understand the fuzzy/non-existant answers.  Obviously, I'm a newbie, so please don't jump all over me for this.  If it was Word - I could do this in NO time.  I just find it incredibly frustrating that inputting a normal document should be so difficult.
    Is "Pages" *not* a word processing program?  Is it just a cut and paste application?  Sorry for the tone - I mean no disrespect - it's just that I've been fooling around with this for DAYS and I just don't have time to spare anymore.  I really need to get this done.
    Can somebody give me a straightforward answer on how to just type a normal document into pages without using text boxes?
    Thanks and I apologize for not being mac-savvy.  It took some of us a lot longer to see the light =)

    Here is a script doing the conversion task for you.
    Open a Page Layout document
    run this script:
    --{code}
    set p2t to (path to temporary items from user domain) as text
    set path_2_doc to p2t & (do shell script "date +_%Y%m%d_%H%M%S.doc")
    tell application "Pages"
      save document 1 in path_2_doc
      open file path_2_doc
    end tell
    --{code}
    that's all folks.
    Yvan KOENIG (VALLAURIS, France) lundi 20 juin 2011 18:03:28
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • Delaying when switching between apple mail and safari

    just on mavericks.
    it more or less looks and feel ok but...
    when I switch between apple mail and safari, everything "freezes" for some seconds (up to 30).
    anyone similar experiences?
    what could be the cause of that?
    its really disturbing.

    I am a little puzzled by the libraries and switching between the libraries. My personal computer has the majority of the movies and content that would be transfered to the appletv. I chose to only select a minimal amount of content (of movies and tv shows, music via playlists) so there would be space left that would hold photos. Also, i just want to send over only what I want to view (manual synch) If I switch to my Kids library, it streams all the content well (movies & tv shows)(which is fine and streams well) If I switch back to my library, it shows every movie, every tv show, hundreds of music playlist that I did not choose to see. (stream mode) The only fix is to reboot the computer, and all is well. anyone experience this issue?

  • Difference between line type and internal table?

    Hi..
    I wanted to know, what is the difference between Line type and Internal Table?

    Hi,
        Before the 4.7 release in SAP if we want to define an internal table we have to write the defination using the occurs statement and we need to define all the fields using INCLUDE STRUCTURE or indidually all the fields ine by one.
    From 4.7 release of R/3 SAP introduced the Line type concept and it's part of the ABAP OOPS concept. for internal table defination we don't need to use the occur statements. Instead INCLUDE structure  we need to create a Line type for that structure in Se11 and then we can define the internal table like :
    DATA : ITAB TYPE TABLE OF <LINE_TYPE>.
    Only thing is this table will be  a table without header. So for internal table processing we need to define a work area structure of type line of line type  . EX:
    DATA: WA_ITAB TYPE LINE OF <LINE_TYPE>.
    Hope this helps.
    Thanks,
    Greetson

  • Iphone switching between pod cast and Ipod shuffle

    Hello, I have an IPhone 3 G and while I am running at my gym it keeps switching between my IPod and my podcast player. I have checked my internet connections and it is fine. I know I am not hitting the shuffle buttoon because I turn the sceen saver off, after I have selected the Pod Cast music that I like. Is it the head phones or the IPhone?

    One thing that might help out.
    The button on the headphones does not have the ability to shuffle media files.
    One click to pause or play. two clicks to advance to the next track.
    Here is a link to the iphone user guide that might help out.
    Check out page 63 for shuffle and repeat features.
    http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf
    Hope this helps.

  • CS6/CC - switching between source monitor and timeline disaster

    Now what is this?
    It all works fine until you try DV Output.
    In DV Output mode every time you switch between source monitor and the timeline it goes to some scary ritual:
    1. output disabled on external monitor
    2. some crazy flickering happens
    3. ok, now updated picture on external monitor finally appears
    Same happens when switching back to timeline.
    Also when scrubbing through timeline video and audio is late for a few centuries on DV device/external monitor/speaker.
    Why Adobe screwed firewire environment editing? I'm thinking about changing my job. Editing with Premiere is killing me lately. I'm thinking about starting to work with bees or strawberries, or something else less frustrating.
    And Premiere CS 5.5 was the best editing software ever released. It has no similar problems. Why CS6 and CC are retarded?

    I'm just asking for properly working feature which is alredy implemented and worked fine in earlier versions.
    Adobe, can this be fixed, please?

  • Switching between OS X and Win7 on MacBook Pro

    Is there an app or some process to easily switch between OS X and Win7 on my MacBook Pro? Thanks.

    If Windows is installed in BootCamp then reboot from one OS to the other.
    If it is install to be used by an emulator that start your Windows applications.
    Allan

  • Timeline window missing button to switch between frame mode and timeline mode

    I'm using Photoshop CS6 Extended.
    This is what my timeline looks like now.
    In tutorials they refer to a button that should be to the left of the drop menu that says "forever". The button is supposed to allow you to switch between frame mode and timeline mode.
    this is what the timeline window looks like in timeline mode and with the button that allows you to switch.
    I've already tried reinstalling and upgrading to CS6 extended, as some forums suggested.
    Please help. Animation is the core reason that I need photoshop and without this button I'm extremely limited. Thanks.

    OK. This should work. Copy and past the below script into Script Editor, save it as an AppleScript application to the Desktop. Double-click it and it should change to grayscale. Double-click it again and it'll toggle back.
    tell application "System Preferences" to activate
    delay 1
    tell application "System Events"
    tell process "System Preferences"
    click the menu item "Universal Access" of the menu "View" of menu bar 1
    click the radio button "Seeing" of the first tab group of window "Universal Access"
    click the checkbox "Use grayscale" of tab group 1 of window "Universal Access"
    end tell
    end tell
    tell application "System Preferences" to activate
    delay 1
    tell application "System Events"
    tell process "System Preferences"
    click the menu item "Universal Access" of the menu "View" of menu bar 1
    click the radio button "Seeing" of the first tab group of window "Universal Access"
    click the checkbox "Use grayscale" of tab group 1 of window "Universal Access"
    end tell
    end tell
    tell application "System Preferences" to quit

  • Should Iplace my ethernet switch between cable modem and airport extreme?

    I'm looking for the best placement of an ethernet switch in my home network.
    Should I place it "between" my cable modem and my AEBS or connect it to the output from my AEBS?
    The current placement is connected to one of the AEBS outputs.
    I'm attempting to set up an old AE (802.11 a/g from 2004) with a different network name than my home network, that I'm trying to set up for a college dorm network and each time I plug the AE to the switch to confirm its functionality, my network gets a little confused.
    Help appreciated.
    Regards,
    jim P.

    Should I place it "between" my cable modem and my AEBS or connect it to the output from my AEBS?
    This all depends on whether you have a simple modem.....or.....a modem/router or gateway combination device.
    If  you have a simple modem, you cannot place the switch between the modem and the AEBS. The reason for this is that the modem can only deliver one valid IP address and it will be a matter of chance as to which of the devices connected to the switch receives it. The other device connected to the switch will not be able to access the Internet.
    If you have a modem/router or gateway type of device, you can place the switch after the modem/router and before the AEBS if you wish, although there is really no advantage to doing so unless this makes things easier for you in terms of hook up.
    If none of this makes much sense at all to you, leave the switch in its current location connected to one of the LAN <-> ports on the AEBS since that setup will work correctly no matter what type of "modem" that you might have.

  • Audio port and internal speakers issue

    My audio port and internal speakers are not working when playing and/or streaming audio. I'm assuming it's a software issue considering it has happened straight after downloading OS X.
    Any, simplified and jargon-free advice, would be very appreciated. Need music for my hours of coursework/essay writing ahead of me.
    Many thanks for any help
    Andy

    It often is helpful to know what EXACT model MBP one is dealing with.
    What works or does not work under what conditions?  Internal speakers, earphones? 
    Have you opened System Preferences>Sound and checked the settings?
    Ciao.

Maybe you are looking for