Switch by push to switch till release
Hallo.
Ich have programmed a calibration of a ECU in LV8. To start the calibration i have implemented a switch. When i push the switch, the calibration starts. But after the calibration ist completed, the switchbutton is still in pushed state. It is necessary, that the button wouold be in unpushed state after the calibration is completed because i have to make new inputs before calibrating second time! When i change the manner of the button/switch into "switch as long as mouse click" i get a error when i load the Applikation to my real-time-system (VIs with boolean elements, can´t get loaded up). Is there another alternative to reset the switch after completing my calibration??
Thank you
You could set the switch to "switch when pressed", the reset it programmatically via a local variable at the desired moment..
LabVIEW Champion . Do more with less code and in less time .
Similar Messages
-
HT1386 My iPhone switched off and cannot switch it on
I just update the OS and my iPhone switched off and cannot switch it on
Hold the sleep/wake and home button together until you see the Apple logo and then release. The phone should reboot. This can take up to 30 seconds worth of holding.
-
Switching OFF the custom switch
Hi Experts,
I am planning to use switch mechanism to work on system enhancement. On this way, I have created a custom Switch and package, Using transaction code SFW1 I have activated same. If I want to deactivate the switch what is the procedure? Any Tcodes??
Can I switch ON/OFF custom switches? How about in case of standard switches?
Thanks in advance,
ChandDear Linda,
I recall switching off the buffer in one of my projects. We did not encounter any problems, since it was a rare activity. Therefore, I do not expect any performance issues on this matter. Anyway, I presume, one can always switch it back.
Regards,
Eli -
my facetime starts connecting then fails to make the call ? ive tried the swtiching face time off switching macbook off then switching it back on the logging back in to facetime but still no joys. any help ?
my facetime starts connecting then fails to make the call ? ive tried the swtiching face time off switching macbook off then switching it back on the logging back in to facetime but still no joys. any help ?
-
Is it possible to sort or filter the switch routes under the switching tab?
In Teststand 3.1, is it possible to filter the switch routes under the switching tab in Action Properties? Since I have a large amount of routes that have been created in Switch Executive, how can I filter out some of the routes from the "Routes to Connect" section?
The TestStand Switching does not provide any inherent filtering capabilities. You do have a couple of options, however.
(1) NI-Switch provides the ability to set up route connections in
different groups. The Switch Page in TestStand allows you to
select Routing groups as well as specific Routes. It may be
easier for you to organize your Connections as groups and choose
between different groups.
(2) The Property page also allows you to build route connection
string and use that string for your Switching actions. It
may be easier for you to build a Route string and easily change that
string rather than selecting your routes everytime from within the
TestStand window.
Good Luck!
Tyler T.
Applications Engineer
National Instruments -
the iphone has been acting weird. my iphone doesnt charge whenever it is switched On. When I switch OFF the phone, it charges for 2 mins then comes back On and stops charging. I dont know what the problem is. trust me, the problem isnt from d charger. PLS anyone with any solution
@wetdro
If your device has been jailbroken during the warranty, Apple will not service it.
Maybe you missed that in this article:
Inability to apply future software updates: Some unauthorized modifications have caused damage to iOS that is not repairable. This can result in the hacked iPhone, iPad, or iPod touch becoming permanently inoperable when a future Apple-supplied iOS update is installed.
Apple strongly cautions against installing any software that hacks iOS. It is also important to note that unauthorized modification of iOS is a violation of the iOS end-user software license agreement and because of this, Apple may deny service for an iPhone, iPad, or iPod touch that has installed any unauthorized software.
copied from Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issu… -
i have problem with my iphone 5 lock switch..as lock switch not working properly..and my iphone is not in warrenty.. so plz tell me what i do...
The iPhone 5 is less than a year old, so all of them should still be in warranty unless they have been jailbroken or physically damaged. If you have a hardware problem as you describe the only option is to get the phone replaced by Apple or repaired by a non-authorized shop. The Apple replacement will be free at any Apple store in the country where the phone was purchased. If Apple determines that the phone was physically damaged or jailbroken it will cost $229.
-
Hi,
I'm following this
guide I'm getting an error when running the below command:
Set-VMNetworkAdapterVlan -vmname PurpleVM1 -Isolated -PrimaryVlanId 2 –SecondaryVlanId 4
Generates the following error:
Set-VMNetworkAdapterVlan : The operation failed.
Failed while applying switch port settings 'Ethernet Switch Port VLAN Settings' on switch 'New Virtual Switch': One or
more arguments are invalid (0x80070057).
A parameter that is not valid was passed to the operation.
Does anyone know why this is happening?
taHi TomG101,
It seems that there is a configuration conflict on the virtual switch port .
Also I tested the command on my lab , it works .
For troubleshooting please create a new virtual switch then try to configure again .
Any further information please feel free to let us know .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Switches of and wont switch on
Switches off and wont switch on
Restore iPhone with iTunes on computer. If still problem after the Restore, the iPhone 5S has full Warranty, make Genius reservation or set up service and take or send to Apple for resolution.
-
atleast once in a week the slide to unlock will not work in my iphone 4 and this is happening from the day i have upgraded to ios7. to access my iphone i have to a switch off and then switch on. really frustrating never expected this from Apple.
Hello sivas_live
Try out the troubleshooting steps in the article to resolve issues with your touchscreen intermittent response.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Regards,
-Norm G -
what is an example of an external switch in the accessibility- switch control feature on an iPhone 5s
Perhaps this will help:
http://bdmtech.blogspot.com/2013/09/new-in-ios-7-detailed-look-at-switch.html -
I have an iphone 4 n it is getting switched off automatically n switches on automatically , also it increases d volume by itself. Its a 1year old phone n the version is 4.3.2(8H7). Also the volume sign does not go off from the screen. Can anyone help me find out if its a hardware problem???
Do you have a case on your iPhone? It could be pressing the buttons on the iPhone and causing it to restart or behave unusually.
This Apple doc will help you find out if there is a hardware or software problem -> iPhone: Hardware troubleshooting
You can always contact Apple and setup service through Express Lane. -
For whatever reason I can telnet from another switch to the SG300 switch but not directly to the switch. I also can't access the web interface or ping the switch. Any help would be appreciated. Here is the running config
config-file-header
WasteWaterSG30010MPP
v1.3.5.58 / R750_NIK_1_35_647_358
CLI v1.0
set system mode switch
file SSD indicator encrypted
ssd-control-start
ssd config
ssd file passphrase control unrestricted
no ssd file integrity control
ssd-control-end xxxxxxxxxxxxxxxxxxxxxxxx
vlan database
default-vlan vlan 2
exit
vlan database
vlan 2,75,200,999
exit
voice vlan id 200
voice vlan oui-table add ________
voice vlan oui-table add _phone_____________
voice vlan oui-table add ___________________
voice vlan oui-table add ______________
voice vlan oui-table add
voice vlan oui-table add ___________
voice vlan oui-table add ___
voice vlan oui-table add ______________
hostname WasteWaterSG30010MPP
line console
exec-timeout 0
exit
line telnet
password 382fda4a4a26e6637edac0eb8b8ba4581087d32d encrypted
exit
line console
password 382fda4a4a26e6637edac0eb8b8ba4581087d32d encrypted
exit
enable password level 15 encrypted 382fda4a4a26e6637edac0eb8b8ba4581087d32d
username admin password encrypted 382fda4a4a26e6637edac0eb8b8ba4581087d32d privi
lege 15
snmp-server location XXXXXXXX
snmp-server community String1 ro view Default
sntp server 172.16.2.1
ip telnet server
interface vlan 2
ip address 172.16.2.23 255.255.255.0
no ip address dhcp
interface gigabitethernet1
storm-control broadcast enable
storm-control broadcast level 10
storm-control include-multicast
port security max 10
port security mode max-addresses
port security discard trap 60
spanning-tree portfast
switchport mode access
switchport access vlan 999
macro description ip_phone_desktop
!next command is internal.
macro auto smartport dynamic_type unknown
interface gigabitethernet2
spanning-tree portfast
switchport mode access
switchport access vlan 999
interface gigabitethernet3
spanning-tree portfast
switchport mode access
switchport access vlan 999
interface gigabitethernet4
storm-control broadcast enable
storm-control broadcast level 10
storm-control include-multicast
port security max 10
port security mode max-addresses
port security discard trap 60
spanning-tree portfast
switchport mode access
switchport access vlan 999
macro description ip_phone_desktop
!next command is internal.
macro auto smartport dynamic_type unknown
interface gigabitethernet5
spanning-tree portfast
switchport mode access
switchport access vlan 999
interface gigabitethernet6
spanning-tree portfast
switchport mode access
interface gigabitethernet7
spanning-tree portfast
switchport mode access
switchport access vlan 999
interface gigabitethernet8
spanning-tree portfast
switchport mode access
switchport access vlan 999
interface gigabitethernet9
spanning-tree link-type point-to-point
switchport trunk allowed vlan add 75,200,999
switchport trunk native vlan 2
macro description switch
!next command is internal.
macro auto smartport dynamic_type switch
interface gigabitethernet10
spanning-tree link-type point-to-point
switchport trunk allowed vlan add 75,200,999
switchport trunk native vlan 2
macro description switch
!next command is internal.
macro auto smartport dynamic_type switch
exitA member of which VLAN ID is that device from which you trying to reach that switch?
Is that device directly connected to switch WasteWaterSG30010MPP? If yes, to which port?
If you are connecting from different VLAN than VLAN2, are you using routing between VLANs? Where is that routing device connected to?
> I also have another switch that connects to the network through this switch and am able to telnet to it.
that second switch member of same VLAN 2? Or management is part of different VLAN?
..too few information to be able to give you final answer. -
Revision: 17758
Revision: 17758
Author: [email protected]
Date: 2010-09-17 16:24:35 -0700 (Fri, 17 Sep 2010)
Log Message:
Fix FM-1048: SwitchingProxyElement switches early on first switch. The switch timer now starts upon load completion, not upon initialization.
Ticket Links:
http://bugs.adobe.com/jira/browse/FM-1048
Modified Paths:
osmf/trunk/apps/samples/framework/ExamplePlayer/org/osmf/examples/switchingproxy/Switchin gProxyElement.as -
All the client switches becoming STP ROOT switches
Hi All,
Here is my topology. I've two vlans (50,60). I was doing some lab so just build this topology and when i check the the spaning tree configuration on all the switches except the two transparent switches. All the client switches have become ROOT switches for VLAN50,60.
I've give the below commands on the VTP-Server, but still the problem is not clearing.
VTP-SERVER(config)#spanning-tree vlan 1 root primary
VTP-SERVER(config)#spanning-tree vlan 50 root primary
VTP-SERVER(config)#spanning-tree vlan 60 root primary
"show spanning-tree" outputs:
Output from VTP-Server:
Output from Client1:
Output from Client2:
Output from Client3:
Can someone please correct the issue?
Thanks in advance.
Regards,
ChanduPerfect - Rolf. Issue resolved.
I understood it. Since both the transparent switches are not having vlan50,60 they are not participating in the STP calculation for those two vlans.
Since those two switches are not participating in the STP calculation. For every switch it seems like it is the only switch in the topology, so STP made them ROOT switches, got it...
Really playing with devices like anything.... but however learning like this is very good...
Thanks a lot for your help again.
Regards,
Chandu
Maybe you are looking for
-
Best way to call EJB - Servlet or Tag Library
Hi, What is the best way to call an EJB from a JSP? We are using Weblogic 7.0(moving to 8.1 beta). WE have a form on a JSP that needs to get data from an EJB. Our flow goes from JSP --> Controller servlet or tag library -->EJB "Bean" Controller --->
-
Impossible to buy Photoshop Elements 10 online in Croatia
Adobe massively complains about piracy in Central European contries and yet when you try to buy software online they won't let you. I've been trying to buy PE for a few days now with no success. I'm very annoyed by this and it looks like my only solu
-
HT4221 Synched Photos from PC should be in File Name Order, not by last modified date
Since installing IOS 7 the sorting of my photos from my PC sent to my Iphone have become totally random. Apple claims the files are by Last Date Modified. I have a very detailed file naming system on my PC which makes Photo Retrieval by Date, Name, S
-
Hi we are using report to report interface to jump between two of our queries. In our first query based on po number it should jump to invoice report.( link is po number) ,it works fine when there is invoice for PO , but when there is no invoice for
-
i got a bill for pandora one i never order please refund my account $3.99 and cancel the subscription Thanks