Switch CC license on same PC without reinstall?

I have a question about switching from one licence to another on the same computer. Here's my situation: I have worked for a company for a while, and the company has one Mac workstation with the complete Adobe CC. I have just ordered a PC laptop workstation for my personal use, and I understand that the CC licence allows for running CC on two computers. So far, so good.. the company has no problem with me using the company's licence on my personal laptop. But if I later leave the company (or if the company decides to cancel the subsciption), and I decide to buy my own CC licence, do I have to uninstall everything on my laptop first, and then buy / download / install CC again? Or will it simply be possible for me to just switch the associated licence on the already installed CC?

It should be a matter of signing out from the original installation and signing in with your new ID/code.

Similar Messages

My phone has been losing calls and according to the apple store i need to reset it due to a software fault - i have done this and still have the same problems. how do i reset the phone without reinstalling the soft ware fault by way of icloud backup

my phone has been losing calls and according to the apple store i need to reset it due to a software fault - i have done this and still have the same problems. how do i reset the phone without reinstalling the soft ware fault by way of icloud backup

Well, it appears that your backup is corrupt, thus causing your issue. So, you'll have to restore as a new device, & not from backup. Follow this by syncing your content back to your phone:
http://support.apple.com/kb/ht1414
Do not restore from backup.

My comp with Windows7 doesn´t recognise iPhone 5c. I reinstalled USB drivers,iTunes,restarted both devices but without positive result. iPad is recognised on the same comp without problems. Could me somebody help?

My comp with Windows7 doesn´t recognise iPhone 5c. I reinstalled USB drivers,iTunes,restarted both devices but without positive result. iPad is recognised on the same comp without problems. Could me somebody help?

Hi there tsubert,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

I upgraded my iMac and need to switch license to new computer without access to old computer?

I recently upgraded my iMac and had Photoshop CS6 migrated to my new computer. I'm unable to use photoshop now since I wasn't able to uninstall the software on the old computer. How can I switch my license from one computer to the next without access to the old computer or the access code?

If you bought it from Adobe, your serial number should be under the Adobe ID you used to buy it. Even if you did not get it from Adobe, if it was registered with Adobe, the serial number would be under "My Products" including the serial number of the product you upgraded from.
You can download the CS6 installer from here: Download CS6 products

What's the easiest way to switch the license to a new computer for the same user?

What's the easiest way to switch the license to a new computer for the same user?

Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac does not matter... 2 on the same operating system, or 1 on each

How can I switch from Automatic to Manual update without losing songs?

I have on my ipod songs from another computer, however I'm afraid to plug it into my computer because my computer is set to automatic update for my ipod. Is there a way for me to switch my ipod to manual update without losing songs on my ipod when plugging it in? thanks.

Here is what you do:
Open iTunes.
Plug in your ipod.
hold control and shift at the same time. this stops your ipod from updating automatically. Hold this until your ipod is finished docking.
Then go to edit>preferences>ipod
then change the setting from update automatically to update manually.

The photo print quality from my Mac to my Epson Artisan 810 is poor. When I take the same photo files (JPEGs) to my PC to print to the same printer without even uploading them to the PC, they print brighter and crisper from my PC.

The photo print quality from my Mac to my Epson Artisan 810 is poor. I just purchased my iMac for my photography business in Jan. (this is my first Mac). When I first tried printing, I noticed the quality wasn't as good as I expected it to be. Then, I had to print 4-3.5x5s on a sheet, so I e-mailed the image to myself and opened it on my PC to print it (much easier to print that way on PC in Windows Photo Gallery - I think it's impossible to print that way in iPhoto). That's when I first noticed that when I take the same photo files (JPEGs) to my PC to print to the same printer without even uploading them to the PC, they print brighter and crisper from my PC.
I've already been on the phone and e-mail w/Applecare many times over this issue. We've tried creating a test user and printing from there, and we've tried reinstalling the OS. I've tried printing from iPhoto, ImageCapture, and Preview apps/utilities, all w/the same result - no comparison to the PC-printed versions (no enhancements have been performed on the PC).
I'm out of ideas, and so is Applecare. They say it's most likely a driver issue b/c the printer is outdated, and that the only solution is to buy a new printer. BUT it is a pain for me to purchase a new printer - it takes days of research due to the nature of my business and the fact that I need a printer that can print directly onto a disc. I love this printer and don't want to have to buy a new one if I don't have to.

englishfreak2004 wrote:
Yes. I've checked for updates, and the driver I installed is the same as the one on Epson's website. I also spoke with Epson Customer Service, which was a dead end. Apple says the problem is due to an Epson driver issue (blaming Epson), but Epson says that with the older printers, it's actually Apple who creates the driver, so the problem is actually with Apple. Typical he-said, she-said...
Maybe not. Probably worth checking here:
Epson drivers for Mavericks:
http://www.epson.com/cgi-bin/Store/support/SupportMavericks.jsp

Switch product license from PC to Mac? How-to or is it possible

I am finally switching from my old PC to a new MacBook pro! Only problem is my student-licensed Photoshop CS6 is for PC and not Mac! How can I switch the license to Mac or will I have to buy a whole new product? (I'd rather not buy a whole new product since that is expensive for small-student-budget me) I currently have the student/teacher edition Adobe Photoshop CS6 Extended. I bought this at the beginning of the last school year. Please let me know if it is possible to switch the licensing or if I need to buy a new product! (And if it is possible, then how?)
Thank you so much!!

SOLUTION TO PROBLEM:
(what I did)
1. [Read about it here: Order product | Platform, language swap]
To request a platform or language swap on the same (current) version of a product, do the following:
Register the product that you want to swap. See Adobe Product Registration page.
Note:If the product you want to swap is an upgrade, you need to register the previous versions too.
Sign in to the Support Portal using your Adobe ID (usually your email address):
North America: www.adobe.com/go/supportportal
UK: www.adobe.com/go/uk_supportportal
France: www.adobe.com/go/fr_supportportal
Germany: www.adobe.com/go/de_supportportal
Japan: www.adobe.com/go/jp_supportportal
Asia/Pacific: www.adobe.com/go/supportportal_ap
Under Get Support, click Orders & Returns.
From the Choose Issue Type menu, choose Product Exchange or Swap.
Click Proceed to Online Form.
In the Submit a Request page, follow the onscreen instructions.
Click Review Case & Submit.
You can expect a response within one to two business days. **I DIDN'T WANT TO WAIT FOR A RESPONSE SO I TOOK THE NEXT STEP: CALLING SALES [SEE BELOW]
2. After doing that ^ you can check on your order by calling Adobe Sales at 1-800-833-6687.
The sales person I talked to had a very heavy accent but was extremely helpful and after I gave him my email address for my adobe account he found my request, and finished it up for me. My sales rep canceled my serial number for my Photoshop CS6 and had his supervisor create a serial number for the same product but with Mac licensing. He then shipped to me (for free) a DVD disc set of the Mac licensed product, to arrive in 7-10 business days.
I DID NOT HAVE TO PAY ANYTHING FOR THIS.
I DID NOT HAVE TO SIGN ANYTHING AND FAX IT TO ANYONE.
The customer service rep then sent me a confirmation email with a link to download the new product, again with the new serial number, and instructions on how to install the new product.
The whole cross-grade ordeal took about 20 mins.
Overall, I am EXTREMELY satisfied with Adobe Customer Service for being able to do this for me! It was as easy a process as it could get.
*note: If you are trying to switch from a version of Adobe (any product, say Photoshop for example) that is no longer sold as the current version, you will have to pay to upgrade to the new version, but there will be no fee to cross-grade to a different platform.
Good luck to anyone else with this issue! Hope my instructions were clear!

Can I resize my bootcamp partition without reinstalling Windows?

Hi
I have recently installed an OEM version of the Windows 7 and I have allocated 50% space in the bootcamp? I want to resize the partition now, to allocate lesser space for Windows. How do I do it without reinstalling my Windows? I mean I can't re-install my Windows as the OEM version allows only 1 installation.

CampTune from Paragon http://www.paragon-software.com/home/camptune/ but it seems not yet Lion-enabled.
(The System requirements only mention up to Snow Leopard).
But since you are doing a reinstall of WIndows onto the same computer as the first time, you are entitled to use your OEM version for it.
Stefan

View data in client B from client A in the same SID without a valid logon?

Hi Folks
We are planning on upgrading our 4.6C system to ERP 6.0, and are initialy considering having two clients in the same sandbox SID. One would be for the developers to perform code remediation checks (client A), and one would contain a copy of production data for performing testing of functionality over live data (client B).
Would it be possible to view data in client B from client A in the same system without a valid logon to client B or RFC connection to client B from client A? For example via the use on an ABAP program to SQL the database?
I know one can use transactions like SM30/SM31 to view, compare, and adjust data between clients, but this requires an RFC connection and valid logon to the target client.
Regards
Kevin.

Hi Kevin.
>
Kevin McLatchie wrote:
> Would it be possible to view data in client B from client A in the same system without a valid logon to client B or RFC connection to client B from client A? For example via the use on an ABAP program to
Short answer: yes.
If someone has the right to write and execute ABAP reports on the system he is able to access the data of all clients. So I don't think that this setup is advisable. Don't mix development and production data in one system.
Best regards,
Jan

I want to open a folder in a separate window by clicking on it. For some reason when I click on a folder it just replaces the one I was just in. I want them both to be open at the same time without having to go through several steps.

I want to open a folder in a separate window by clicking on it. For some reason when I click on a folder it just replaces the one I was just in. I want them both to be open at the same time without having to go through several steps. Old apple operating systems made it easy to have several folders open at one time.

Eric, thanks that works but seems like an extra added step also to do it that way. I've got to move and organize a ton of files and I'm looking for a easy way to get this done. I could also open the folder into a separate tab and then drag the tab out so it becomes an open window but thats a lot of fussing around also with extra steps. Not sure why these newer operating system seems more confusing and less user friendly than what they used to. In the past I could just click on any folder and it would open in a separate window making it really easy to copy or move files from one place to the other just by simply dragging them from one window to the other. Seems like I'm going through several extra steps now to do a simple task.

How can i run 2 i tunes accounts on the same computer without songs duplicating?

my wife and I both have ipods, how do you run an account each on the same computer without files syncing on both ipods/ libraries?

Using More than One iDevice on the Same Computer
This applies mainly to couples who are adding another device and do not want their email, messages, etc. being duplicated on both devices. To begin read: How to use multiple iPhone, iPad, or iPod devices with one computer. You need to establish a separate Apple ID and password for whomever will use the new iDevice. See Apple - My Apple ID and Frequently asked questions about Apple ID. The easiest way is to do this on the computer using iTunes: iTunes- How to set up an Apple ID within iTunes.
On the computer create a new user account for the person with the new iDevice. This will be the user account that person will always use. He/She will no longer use the other user account. This way that person will have a separate iTunes Library
Start by transferring the new device(s) to a new account along with all your data. Save any photo stream photos that you want to keep to your camera roll (unless they are already in the camera roll) by opening your Photos app, tap on Albums icon at the bottom. Now, tap on My Photo Stream album; tap Select; tap on the photos you want to select;, tap the share icon (box with upward facing arrow) in the lower left corner; then tap Save to Camera Roll.
If you are syncing notes with iCloud that you want to keep then you need to open each of your notes and email them to yourself. Later you can copy and paste the text into new notes created in your new account.
Tap on Settings > iCloud > Delete Account (only deletes it from this device, not from iCloud; the person keeping the current account will not be affected,) provide the password to turn off Find My Phone and choose Keep on My iDevice when prompted. Sign in with a different Apple ID to create your new account. Choose Merge to upload your data.
Once you are on separate accounts, you can each go to icloud.com and delete the other person's data from your account.
Note: The essence of the above was created by user, randers4. I
have made substantial changes to improve readability and syntax.

More then one student license on same account

Hello. Can i have more then one student license on same account. The 60% of thingy. One for home, one for work and one for the notebook. They may run simultaneously because of the friends using the computer. All 3 computers will use same account name and password.

You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each.
If you install on a third computer, it will request you to de-activate on the other two computers. You can then reactivate one of the previous two computers, and use Creative Cloud apps on it.
If you regularly need to use the Creative Cloud on more than two computers then it would be best to purchase an additional subscription. This is the same licensing btw which we have for our prepetual product. An advantage though for Creative Cloud over the perpetual product is that you can install on Mac and Windows with the same subscription!
As it stands, the EULA states that you can install it on up to two computers at a time, however, you cannot use applications on those computers simultaneously. This is the case even when you are not using the same application
http://www.adobe.com/legal/licenses-terms.edu.html
Regards
Rajshree

Does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?

does anyone know how the cutout filter works and is there a way of achieving the same effect without using filters to get more control over final look?

Several ways to get similar results. Image > Adjustments > Posturize with low values similar to what you'd use n Cutout. This is the most flexible way I can think of as you keep the image in RGB mode with layers intact. A more radical approach would be to reduce bit depth using Indexed Colour. You'll need to experiment with settings, try changing Forced to Primaries, and Matte to Foreground Color. There's no going back from this route, although you can change the mode back to RGB to re-enable layers, adjustment layers etc.
A nice thing about the Filter gallery filters is that you can change the layer to a Smart object with all the control that gives you.
Now if only this forum could filter out bizarre content.

I have an iphone 4 how can I delete all my junk mail at the same time without having to selct each maessage

How do i delete or empty all the messages in my junk email at the same time without having to mark each message?

Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move this folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.
If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
/Users/YourUserName/Library/Mail/MessageRules.plist
/Users/YourUserName/Library/Mail/MessageRules.plist.backup
Note, in 10.5 & up /Users/YourUserName/Library/Caches/Mail/ may or may not exist.

Switch CC license on same PC without reinstall?

Similar Messages

Maybe you are looking for