Switch control deactivate on ios7

How to remove switch control function on my ipad

If you mean the side switch, I don't think it can be totally disabled...you can set it's function to either control screen rotation or sound mute/unmute:
Settings>General>Use Side Switch to: Lock Rotation or Mute

Similar Messages

IOS7 - Switch Control

Whilst experimenting with the new features on iOS7 I appear to have activated the switch control feature in such a way, that every time I touch the screen, I activate Siri. I Can't disable this because everytime I touch the screen, Siri appears......
Please help!

Just try a general reset then - hold the on/off/sleep button and the home button at the same time until the Apple logo appears. Then let it restart and see if that changes anything.

HT5886 Switch Control "freehand drawing"?

"Use any of several methods to perform actions such as selecting, tapping, dragging, typing, and even freehand drawing." How can switch controls be used for freehand drawing?

Hi Hermant0010
We have seen this behaviour too and we are trying to track down what causes it to occur. (I manage a number of idevices for use with persons with tetraplegia - hence my keen interest in switch control)
What switch devices are you using? I see you have two switches attached?
Also you are using an iphone with iOS7. We have upgraded to 8.
I am not sure how we get this case out of the iPod section - maybe start a new one in an iOS stream?
Andrew

IOS 7 - Switch Control

Whilst experimenting with the new features on iOS7 I appear to have activated the switch control feature in such a way, that every time I touch the screen, I activate Siri. I Can't disable this because everytime I touch the screen, Siri appears......
Please help!

How are you running iOS 7 on a 3GS? l337 h4x? please tell me

Switch control in accessbility is disabled

Hi, i have upgraded my iPhone 5 to ios7, but in settings>accessbility>Switchcontrol, i cant enable the feature switch control, but it is working in my friends iPhone, please help
Thank you.

Got it working, i have enabled assistive touch before, so i came to know that we can enable either one at a time.

Software for Power Switch Control and One Key Recovery for Windows 8?

Hi. I have recently upgraded to windows 8 with a clean install. I was wondering if there is software to get the power switch control software back so I can set it to auto, turbo or cool because without it I think using the switch is useless. I also would like to know if there is a way to get one key recovery back.

I can't use the One Key Recovery of my Y2P anymore, as I decreased the size of the C partition in favour of increasing D:\Data
OKR won't even start anymore...
Any chance to get OKR working again if I make these partitions the same sizes?
Who has the exact partition sizes in MB of the Y2P 20266 with Samsung PM851 256 GB SSD?
0 1 MB NO_NAME unallocated
1 1000 MB WINRE_DRV NTFS
2 260 MB SYSTEM_DRV FAT32 (EFI)
3 1000 MB LRS_ESP FAT32
4 128 MB NO_NAME Other
5 ? GB C:\Windows8 NTFS
6 ? GB D:\Data NTFS
7 14135 MB PBR_DRV NTFS Recovery
8 327 kB NO_NAME Unallocated
Data is backupped daily and I already have a full system backup together with a bootable USB stick that has been tested.
But I like to make sure I can reinstall Windows in the future..
Freedom of Speech has just left the building

How to change the width of a switch control?

If I set long on&off texts, they can't be fully displayed. How to change the width of this sap.m.switch control?
P.S., "width" attribute doesn't work here.

Hi Jocy,
A switch is just a simple boolean control : true/false, yes/no, on/off. Other possibilities are not possible.
If you to need to choose between, say, black/white, then a switch is *not* a good choice; nothing stops you from adding yellow/red/blue to the mix as well.
If you *do* have a strict boolean choice (again, only rue/false, yes/no, on/off) then I would suggest adding a descriptive label with the simple, short switch control.
Otherwise, I would strongly advice using a different type of control (RadioButtonGroup, DropdownBox)

How to connect switch controls to float PLC items ?

The AB PLC float items are 32 bits, but the LV boolean variables are 8 bits!
So how can I connect switch controls to these float items???
Thanks in advance

Check this
http://forums.lavag.org/Industrial-EtherNet-EtherNet-IP-t9041.html
Best regards
Siva
[email protected]

Lowlevel video output switch controls? Modulized, why?

Hi
Well, i use Arch on my laptop. And there is one thing, which makes me wanna jump on it. The Lowlevel video output switch controls kernel module. I need this activated in order to switch between the projector and my laptop, I have my finals soon so its important this works as it should.
Would it be possible to enable this module in later pacman-versions of the kernel? At the time beeing, I would have to recompile everything my self. Which I have yet to become successful at, something is always wrong. But I`ll summarize what I would like to do:
#Build a kernel with this option, choosing it from grub at boot-time. But still have the "pacman-version" in case i mess up somethings up.
NOTE I use luksEncrypted root, does this option do anything to the kernel? Since the installer asks if you need to boot from an encrypted volume. Just asking...
Anyway, can I just download the kernel source. Run make menuconfig, activate the Low level video output switch controls. Then -> make modules_install? And then copy the kernel-version over to boot, and use it? Or what else?
Thank you so much for helping, took me ages discovering this feature was disabled on purpose.

sveinemann wrote:Nice, any idea when it`ll be in core? I cant risk having an unstable kernel, this is my work laptop <3
Not before next weekend. My best guess is next Wednesday or later.

Switch control option itself is disabled such that I can't able to switch it on or off in my iphone 6 ??

Switch control option itself is disabled such that I can't able to switch it on or off in my iphone 6 plus ?

Your only bet would be checking with your carrier to see if they have a trade-in program. They will usually evaluate the phone for any damage and therefore an iPhone with a chip in the back most likely won't get much of a trade-in value.

Turned off auto-scanning, turned on Switch control. Why don't I have control on my screen?

I saw this video on Facebook about switch control about the head gestures etc. I thought I would give it a try. Turned off auto scanning (DOnt know what this is) as the video instructed, then turned on switch control. I set one of the switches to increase volume so I threw on some music to test it out. (didn't work). So I locked my phone. When I turned it on, I could not do anything on my phone (swipe to unlock, pause music, volume up/down nothing!) I tried the bail out feature, and nothing.
HELP??

Apple will only see your comments if you send them here:
Where to send product feedback to Apple:
http://www.apple.com/feedback/

What is the use of switch control ?

when i go to switch control and add a new switch as screen tap. then i enable the switch control. what is the use of that? every time i tap i get the app switcher(multi task) which is good but to go to a certain app i have to tap home button 3 times. i dont know if im wrong. but in switch control i can add gestures but cannot find a way to use it. (simply if i can add special gesture like a swipe with 3 fingures and if i can get multitasker or siri or any other program it will be very use ful isn't it?)

Read these:
http://support.apple.com/kb/HT5886
User guide:
iOS 7 Switch Control - Technical Solutions Australia
http://bdmtech.blogspot.com.au/2013/09/new-in-ios-7-detailed-look-at-switch.html

Has anyone used switch control and siri at the same time?

Has anyone used accessibility switch control and siri at the same time?

Using Xmarks and Sync simultaneously will create a mess.
You can create a new profile, import the bookmarks from your main profile, and set up Sync for the new profile.
The flip side is, bookmarks from your main profile would not get synced with your new profile.
Alternatively, Xmarks is also available for Android.
https://play.google.com/store/apps/details?id=com.xmarks.android&hl=en

HT6027 What the heck is switch control for and why would I use it?

This doesn't begin to explain what this function is or why I would want to use it. What would it do for me exactly? "Switch Control helps you navigate your Mac using switches to enter text, interact with various items on the screen, play games, and ..."

Switch Control is a feature that enables users with fine motor impairments to access their iPhone, iPod touch, or iPad through the use of one or more switches. Switch Control highlights items and item groups one by one on the device screen. To make a selection, the user activates a switch when the desired item or item group is highlighted.
iOS: Using Switch Control - Support - Apple

Ipad locked switch control "device not found"

I have an iPad that is locked. The message at the top says "switch control" and "device not found". Any idea how to access the ipad? It is not responding to the switch at all.

That sounds like there was an assistive device associated to the ipad at one time and is currently not connected.
Is there a small graybox with dark circle in it on the screen? If yes, Slect it, it will be the Assistive touch control.
again, this is a guess on my part.

Switch control deactivate on ios7

Similar Messages

Maybe you are looking for