Switch control in accessbility is disabled

Hi, i have upgraded my iPhone 5 to ios7, but in settings>accessbility>Switchcontrol, i cant enable the feature switch control, but it is working in my friends iPhone, please help
Thank you.

Got it working, i have enabled assistive touch before, so i came to know that we can enable either one at a time.

Similar Messages

  • Switch control option itself is disabled such that I can't able to switch it on or off in my iphone 6 ??

    Switch control option itself is disabled such that I can't able to switch it on or off in my iphone 6 plus ?

    Your only bet would be checking with your carrier to see if they have a trade-in program. They will usually evaluate the phone for any damage and therefore an iPhone with a chip in the back most likely won't get much of a trade-in value.

  • In my phone switch control button is shown disabled . i am not able to turn it off/on.

    its is shown disabled . what should i do to enable it to do on/off. i really want to use this feature.

    Check under Settings > General > Restrictions to see if it is restricted there.

  • Disabling Switch Control...

    Hello!
    wonder if there any methods of disabling Switch Control from iPad2?
    I got mine sorted out but i'm still looking from some people who knows best.
    we know that it was frozen and you can't do anything...
    thanks

    ArcCloud,
    Accessibility features can be enabled and disabled in Settings -> General -> Accessibility.
    iPad User Guide - Accessibility features
    http://help.apple.com/ipad/7/
    All my best,
    Allen

  • How to disable switch control when your Siri doesn't work.

    There's alot of people who managed to turn their switch control off by Siri or by triple click. How ever I disabled my Siri and was stuck at lock screen with no screen feedback. Went thru alot of online remedys and all didn't work. I'm sure there are a few who had this problem. So what I did was -
    i hold home and power button to off my i pad. Then turn it on again. (When it just loaded to main screen you will have a few sec before switch control works again. )So when you are in main screen , triple click  to get the accessibility box and off switch control. By tapping on the option. It worked for me. Hope it works for you. The Internet don't have much to help ref switch control which is irritating. Hope this post helps.

    I am so sorry for sending the same thread for so many times, there is a problem with my brower.

  • How cani disable switch control

    i enabled switch control on my ipad 2. i cant enter my passcode or slide to unlock. the ipad wont do anything. how do i disable or get to the settings with out deleting anything from my ipad. or can i control the settings from another computer

    Try triple clicking the home button.

  • I am trying to enable switch control on my iPad air but it is in disable state it's not allowing me to enable could you please provide me the solution

    I Want to setup switch control on my iPad i am trying the same but it is disabled please help me out how do I enable switch control.

    Try to narrow this down further, do you use restrictions at all? I don't think that there is anything in the restrictions setting that would disable Switch Control, but I don't use restrictions. From my limited experince with the restrictions settings, the only thing that I can think of that might be making the setting greyed out would be Settings>General>Restrictions>Allow Changes>Accounts. But I really don't think that has anything to do with this.
    SInce this is a brand new iPad, try basics. Reset the iPad first. If that doesn't work, reset all settings, you will not lose any data in eituer case, but if you reset all settings, you will have to re-enter all device settings again. Resetting all settings will also restart the iPad so don't be alarmed when that happens.
    First, try resetting the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If that didn't work, try this. Reset all settings. Settings>General>Reset>Reset all Settings.

  • Lowlevel video output switch controls? Modulized, why?

    Hi
    Well, i use Arch on my laptop. And there is one thing, which makes me wanna jump on it. The Lowlevel video output switch controls kernel module. I need this activated in order to switch between the projector and my laptop, I have my finals soon so its important this works as it should.
    Would it be possible to enable this module in later pacman-versions of the kernel? At the time beeing, I would have to recompile everything my self. Which I have yet to become successful at, something is always wrong. But I`ll summarize what I would like to do:
    #Build a kernel with this option, choosing it from grub at boot-time. But still have the "pacman-version" in case i mess up somethings up.
    NOTE I use luksEncrypted root, does this option do anything to the kernel? Since the installer asks if you need to boot from an encrypted volume. Just asking...
    Anyway, can I just download the kernel source. Run make menuconfig, activate the Low level video output switch controls. Then -> make modules_install? And then copy the kernel-version over to boot, and use it? Or what else?
    Thank you so much for helping, took me ages discovering this feature was disabled on purpose.

    sveinemann wrote:Nice, any idea when it`ll be in core? I cant risk having an unstable kernel, this is my work laptop <3
    Not before next weekend. My best guess is next Wednesday or later.

  • IOS 7 - Switch Control

    Whilst experimenting with the new features on iOS7 I appear to have activated the switch control feature in such a way, that every time I touch the screen, I activate Siri.  I Can't disable this because everytime I touch the screen, Siri appears......
    Please help!

    How are you running iOS 7 on a 3GS? l337 h4x? please tell me

  • IOS7 - Switch Control

    Whilst experimenting with the new features on iOS7 I appear to have activated the switch control feature in such a way, that every time I touch the screen, I activate Siri.  I Can't disable this because everytime I touch the screen, Siri appears......
    Please help!

    Just try a general reset then - hold the on/off/sleep button and the home button at the same time until the Apple logo appears.  Then let it restart and see if that changes anything.

  • Switch control deactivate on ios7

    How to remove switch control function on my ipad

    If you mean the side switch, I don't think it can be totally disabled...you can set it's function to either control screen rotation or sound mute/unmute:
    Settings>General>Use Side Switch to: Lock Rotation or Mute

  • Software for Power Switch Control and One Key Recovery for Windows 8?

    Hi. I have recently upgraded to windows 8 with a clean install. I was wondering if there is software to get the power switch control software back so I can set it to auto, turbo or cool because without it I think using the switch is useless. I also would like to know if there is a way to get one key recovery back.

    I can't use the One Key Recovery of my Y2P anymore, as I decreased the size of the C partition in favour of increasing D:\Data
    OKR won't even start anymore...
    Any chance to get OKR working again if I make these partitions the same sizes?
    Who has the exact partition sizes in MB of the Y2P 20266 with Samsung PM851 256 GB SSD?
    0 1 MB  NO_NAME unallocated
    1 1000 MB  WINRE_DRV NTFS  
    2 260 MB  SYSTEM_DRV  FAT32 (EFI)
    3 1000 MB  LRS_ESP FAT32
    4 128 MB  NO_NAME Other
    5 ? GB  C:\Windows8 NTFS
    6 ? GB  D:\Data NTFS
    7 14135 MB  PBR_DRV NTFS Recovery
    8 327 kB  NO_NAME Unallocated
    Data is backupped daily and I already have a full system backup together with a bootable USB stick that has been tested.
    But I like to make sure I can reinstall Windows in the future..
    Freedom of Speech has just left the building

  • How to change the width of a switch control?

    If I set long on&off texts, they can't be fully displayed. How to change the width of this sap.m.switch control?
    P.S., "width" attribute doesn't work here.

    Hi Jocy,
    A switch is just a simple boolean control : true/false, yes/no, on/off. Other possibilities are not possible.
    If you to need to choose between, say, black/white, then a switch is *not* a good choice; nothing stops you from adding yellow/red/blue to the mix as well.
    If you *do* have a strict boolean choice (again, only rue/false, yes/no, on/off) then I would suggest adding a descriptive label with the simple, short switch control.
    Otherwise, I would strongly advice using a different type of control (RadioButtonGroup, DropdownBox)

  • How to connect switch controls to float PLC items ?

    The AB PLC float items are 32 bits, but the LV boolean variables are 8 bits!
    So how can I connect switch controls to these float items???
    Thanks in advance

    Check this
    http://forums.lavag.org/Industrial-EtherNet-EtherNet-IP-t9041.html
    Best regards
    Siva
    [email protected]

  • In iOS 5 on the iphone 3gs, how does one disable voice control, not voice dailing.  I have never wanted or used voice control please help me disable it.

    In iOS 5 on the iphone 3gs, how does one disable voice control, not voice dailing.  I have never wanted or used voice control please help me disable it. 

    are you talking about voiceover where the phone is reading things out loud to you? you have to double tap things in voiceover in order to select them. you'll need to go to settings > general > accessibility > and turn off voiceover there

Maybe you are looking for