Switch Control With annoying useless cursor.

I was playing with Switch control on my iPod touch 5 and i added a screen switch and i got the sliding cursor but I deleted the screen swith and the cursor dosnt go away even though it does nothing how can I make it so I can turn Switch Control without the cursor?

Hi Tate S!
I would suggest that you try restarting your iPad to see if that resolves this issue. You can use the article below to guide you on this:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
You may also want to try a reset of the iPad if the issue is still present. Thanks for coming to the Apple Support Communities!
Regards,
Braden

Similar Messages

Using AbleNet intelliswitch with switch control?

I am attempting to interface AbleNet IntelliSwitch to Yosemite Accessibility Switch Control on MacBook Pro to use a button switch as a click and enter. I have that set in the Intellitools software, but Mac is not recognizing it at all points when tested by manually moving the mouse pointer and then clicking with the external switch.

The IntelliSwitch is so old - I don't think it will work with Switch Control. The only thing you might try is seeing if it will work without the driver installed. Intellitools is meant to be used with Discover Envoy and it just may be that if you try it without the software, it might work.
Don't get your hopes up though. If you'd like me to recommend some switches that I know work with Switch Control, let me know.

Software for Power Switch Control and One Key Recovery for Windows 8?

Hi. I have recently upgraded to windows 8 with a clean install. I was wondering if there is software to get the power switch control software back so I can set it to auto, turbo or cool because without it I think using the switch is useless. I also would like to know if there is a way to get one key recovery back.

I can't use the One Key Recovery of my Y2P anymore, as I decreased the size of the C partition in favour of increasing D:\Data
OKR won't even start anymore...
Any chance to get OKR working again if I make these partitions the same sizes?
Who has the exact partition sizes in MB of the Y2P 20266 with Samsung PM851 256 GB SSD?
0 1 MB NO_NAME unallocated
1 1000 MB WINRE_DRV NTFS
2 260 MB SYSTEM_DRV FAT32 (EFI)
3 1000 MB LRS_ESP FAT32
4 128 MB NO_NAME Other
5 ? GB C:\Windows8 NTFS
6 ? GB D:\Data NTFS
7 14135 MB PBR_DRV NTFS Recovery
8 327 kB NO_NAME Unallocated
Data is backupped daily and I already have a full system backup together with a bootable USB stick that has been tested.
But I like to make sure I can reinstall Windows in the future..
Freedom of Speech has just left the building

How to set the size of a control with the mouse ?

hi all,
i am writing a sort of ide (editor which creates applets very easy....) - for this purpose i need some hints from you guys:
of course i need to create some controls like buttons...
no prob - i am able to create buttons and place them at any place.
BUT WHAT ABOUT THE SIZE ?
ok, i have some ideas to realize this but what i want is a thick border arround the control with spots at each corner - when i place the cursor at one of these spots, my mouse cursor should change and it must be able to change the size of the control (while pressing and moving the mouse - you all know that from any ide).
so how to do that?
go on brains!!!
THANX,
andi

I thought about creating dynamically resizable components, but gave it up as the effort seems too much for the benefit. I did a search for info on it and found a lot of people who wanted to do it, but not any who had actually done it completely. Here's some of my thoughts on the subject. You are right on about creating 'sizing handles', it seems to me the way to do this is to create your own container for any component (extend JPanel?) which can switch between no border and your new sizing border at some event. You will need to respond to mouse clicks on this border and follow the 'drag' event to find out where it was dropped. The java drag/drop events probably won't be of any use to you because each component will need an event handler. You need to catch them all.
Finally, you need to figure out how to interact with some LayoutManager or write your own. Most LayoutManagers want to do their own resizing and you will have to deal with this. For example, GridBagLayout will not only resize all of the other components on the affected row and column, but unless you resize the other components, you won't be able to drag the top higher or the left lefter?

Switch control settings - prevented from using touch screen

I have turned on switch control and now managed to lock myself out of usdiong the screen all together.
Heres what i set: Settings > general > accessibility > switch control > switches > add new switch > full screen > scanner select item.
with switch control turned on i cannot use the screen at all.
i have tried asking sir to turn it off but he keeps saying "which setting" and triple clicking the home button brings up the switch contol header up but i am still unable to use the screen.
i have read that i can turn on voice control by asking siri, but that brings up a screen where i need to again use the screen.
occasionally i see a blue box travel oer the screen but i dont know how to use this or how to bring it up again.
has anybody got any ideas???

Found it.
For anyone who has this problem::
check this video http://youtu.be/2W3Z0kSiL7o
If you somehow turn on "Screen" select item, it renders any touch useless.
Here's what you can do, even if you have your phone password protected.
Use Siri to turn on Assistive Touch.
1. Hold down home button and ask siri: Turn on Assistive Touch
2. May have to send a second command: on.
Now your screen should be accessible.
[email protected]
posted by: ihshan

PC h8-1330a with NVIDIA GeForce GT 630 after windows log in black window with only mouse cursor

Hi
PC is an h8-1330a, and the video card is a NVIDIA GeForce GT 630 with driver version 9.18.13.270 dated 29/08/13. connected to a samsung TV via HDMI cable. It is running windows 8.1 OS.
I have installed 1 additiona TV tuner card but otherwise the system is standard HP configuration as it was shipped.
I suspect I have had an automatic windows update mess with the pc as I turned it on and after reaching the windows log in screen and logging in, pc appears to boot into windows and I only see a black screen with the mouse cursor. I can ctrl+alt+del and see task manager but no other windows will display. I tried to switch users and log in with a different account and get the same issue.
I am struggling to enter safe mode or any other mode on boot up to see if i can roll back the video driver.
i have tried hitting esc then f11 to do a restore to no avail.
I cannot seem to enter safe mode on boot up via shift+f11 or f11.
my Dad has the same PC and is not seeing this issue.
wondering if anyone has any suggestions of things I can try?
hoping to try a software fix before trying different video cards/monitors to isolate the issue.
cheers,
andrew
This question was solved.
View Solution.

Thanks,
Shift + Restart from the log in screen finally got me into safe mode where i was able to perform a system restore

How to change the width of a switch control?

If I set long on&off texts, they can't be fully displayed. How to change the width of this sap.m.switch control?
P.S., "width" attribute doesn't work here.

Hi Jocy,
A switch is just a simple boolean control : true/false, yes/no, on/off. Other possibilities are not possible.
If you to need to choose between, say, black/white, then a switch is *not* a good choice; nothing stops you from adding yellow/red/blue to the mix as well.
If you *do* have a strict boolean choice (again, only rue/false, yes/no, on/off) then I would suggest adding a descriptive label with the simple, short switch control.
Otherwise, I would strongly advice using a different type of control (RadioButtonGroup, DropdownBox)

How to remove a black border box that continously tabs to each field automatically till end of web page; restarts to top of page, cannot stop this box. Scroll bar cannot controlled with mouse, returns auto to top of scroll slide, never remaining at bottom

how to remove a black border box that continously tabs to each field automatically till end of web page; restarts to top of page, cannot stop this box. Scroll bar cannot be controlled with mouse, scroll bar returns automatically to the top of scroll slide every time I move the bar to the bottom of the scale. Also, there's a rectangular text box (with black background and white text) that is always on the desktop that emulates a typed text, HTML, or cmd function.

cjuan1morb4ulv wrote:
how to remove a black border box that continously tabs to each field automatically till end of web page; restarts to top of page, cannot stop this box. Scroll bar cannot be controlled with mouse, scroll bar returns automatically to the top of scroll slide every time I move the bar to the bottom of the scale. Also, there's a rectangular text box (with black background and white text) that is always on the desktop that emulates a typed text, HTML, or cmd function.
The first two problems (box cycling from element to element on page, scroll bar returning to top) can be caused by a stuck (or defective) Tab key on the keyboard. Such damage can be caused by a liquid spill; just one tiny droplet is enough to short a wafer switch under one key.
The last issue (black box, white text - sounds sorta like a debugger window) I haven't seen, but could be caused by something similar.
To check for that, try using a different keyboard. If you're using a wireless keyboard, turn it off and see if the oddities stop.

Lowlevel video output switch controls? Modulized, why?

Hi
Well, i use Arch on my laptop. And there is one thing, which makes me wanna jump on it. The Lowlevel video output switch controls kernel module. I need this activated in order to switch between the projector and my laptop, I have my finals soon so its important this works as it should.
Would it be possible to enable this module in later pacman-versions of the kernel? At the time beeing, I would have to recompile everything my self. Which I have yet to become successful at, something is always wrong. But I`ll summarize what I would like to do:
#Build a kernel with this option, choosing it from grub at boot-time. But still have the "pacman-version" in case i mess up somethings up.
NOTE I use luksEncrypted root, does this option do anything to the kernel? Since the installer asks if you need to boot from an encrypted volume. Just asking...
Anyway, can I just download the kernel source. Run make menuconfig, activate the Low level video output switch controls. Then -> make modules_install? And then copy the kernel-version over to boot, and use it? Or what else?
Thank you so much for helping, took me ages discovering this feature was disabled on purpose.

sveinemann wrote:Nice, any idea when it`ll be in core? I cant risk having an unstable kernel, this is my work laptop <3
Not before next weekend. My best guess is next Wednesday or later.

Inference control with oracle

Hi,
I need for my master thesis a possibility to realize inference control with oracle.
For example exist an instance R like
R   |   A    B    C
    |  a1   b1   c1
    |  a2   b1   c2
and a secrecy such *(exists X) R(a1, b1, X)*. With VPD under column hiding can defined this secrecy so that the data combination *(A:a1, B:b1)* be hidden from the instance:
R   |  A    B    C
    |            c1
    |  a2  b1   c2
The Problem is that a safe query like *(exists X)(exists Y) R(a1, X, Y)* was not answered, when the user makes a query
select A from R where A=a1;
Cause this query is a safe query with respect to the secrecy, the answer must not be hidden.
Safe means
*(exists X)(exists Y) R(a1, X, Y) NOT MODELS OF (exists X) R(a1, b1, X)*.
How can I avoid this.
I tried to avoid that whit using "query rewriting" and "materialized view", but that was not successfull, because oracle doesn't rewrite the simple (without Aggregates and Joins) queries.
It will be greate when someone has an idea!
Thanks

As curious as I always am, I was able to discover my XE database from the GC 10.1.0.4 last month. I did this because I asked myself the same question. When there is time, I normally will try everything that says "Not supported" or "Not compartible" to prove it right or wrong. So give it a go, but don't post errors from it here :-). I have not tried it for GC 10.2.0.2, but it worked on 10.1.0.4 (hopefully 10.1.0.3).
Remember, XE has all the features of EE, but a cutdown version. It has an Oracle Service and a Listener on a port, so the agent will pick them up. I have tried all possible things and tools (Forms, Reports, Designer Repository, Jdeveloper, SQL Developer, ODBC, JDBC etc) on XE to break it, but it works like EE. The only difference is when you hit the max allowed 4GB (excluding 1GB system) and I proved the limit right by kicking of a data load into a table using a cursor until it hit the maximum 4GB limit error.

Switch control option itself is disabled such that I can't able to switch it on or off in my iphone 6 ??

Switch control option itself is disabled such that I can't able to switch it on or off in my iphone 6 plus ?

Your only bet would be checking with your carrier to see if they have a trade-in program. They will usually evaluate the phone for any damage and therefore an iPhone with a chip in the back most likely won't get much of a trade-in value.

What is the use of switch control ?

when i go to switch control and add a new switch as screen tap. then i enable the switch control. what is the use of that? every time i tap i get the app switcher(multi task) which is good but to go to a certain app i have to tap home button 3 times. i dont know if im wrong. but in switch control i can add gestures but cannot find a way to use it. (simply if i can add special gesture like a swipe with 3 fingures and if i can get multitasker or siri or any other program it will be very use ful isn't it?)

Read these:
http://support.apple.com/kb/HT5886
User guide:
iOS 7 Switch Control - Technical Solutions Australia
http://bdmtech.blogspot.com.au/2013/09/new-in-ios-7-detailed-look-at-switch.html

Home Monitoring and Control with a third party also monitoring and controlling?

I was wondering if anyone has tried to install Home Monitoring and Control with a third party monitoring, and or controlling the same devices. I know many systems offer multiple control points such as auxilary control touch screens. Has anyone made this work? I have Z wave devices on my home security system (lighting), and would also like to monitor them via Verizon. Possibly also adding some energy monitoring and control, that is not available via my security company. My security monitoring company provide support through Alarm.com, but has limited energy monitoring to thermostat control and such.
The only interactive control with my security company is for alarm monitoring and control, with limited lighting control. All of my devices are GE in the wall mounted lighting controls, and I would prefer to pay Verizon the few extra dollars for the additional features VIA the web, rather than pay Verizon. There used to be an energy package, that included the main power panel load and I thing Thermostat, but I believe some of the bundles have been split up.
There are other options out there now, but I have neen exploring. My GE Switches are from the Lowes Iris system. Much less expensive, and can replace existing wall switches, not like the power cord switches. Plus the store is four miles from my house.

I started with Verizon home monitoring, but if you read through the threads the service is extremely unreliable, still to this day. I am stillusing it, although I am waiting for a refund on the services that I have used since it is so bad but I bought a MiCasaVerde Vera3 system. You pay appoximately $300 for the unit and there is no monthly charge and you get all the features plus pretty much unlimited types of z wave devices to use on it. I would seriously consider using that before Verizon.

Has anyone used switch control and siri at the same time?

Has anyone used accessibility switch control and siri at the same time?

Using Xmarks and Sync simultaneously will create a mess.
You can create a new profile, import the bookmarks from your main profile, and set up Sync for the new profile.
The flip side is, bookmarks from your main profile would not get synced with your new profile.
Alternatively, Xmarks is also available for Android.
https://play.google.com/store/apps/details?id=com.xmarks.android&hl=en

HT6027 What the heck is switch control for and why would I use it?

This doesn't begin to explain what this function is or why I would want to use it. What would it do for me exactly? "Switch Control helps you navigate your Mac using switches to enter text, interact with various items on the screen, play games, and ..."

Switch Control is a feature that enables users with fine motor impairments to access their iPhone, iPod touch, or iPad through the use of one or more switches. Switch Control highlights items and item groups one by one on the device screen. To make a selection, the user activates a switch when the desired item or item group is highlighted.
iOS: Using Switch Control - Support - Apple

Switch Control With annoying useless cursor.

Similar Messages

Maybe you are looking for