Switch executive stops working after labview 2009 installation

Hi, After I've installed labview 2009 my old switch executive virtual device routes stop working in such a way even if I try to set a route from switch executive test panel the attached error message pops up.
I am using:
Labview 9.0.1
TestStand 4.2.1
Switch Executive 4.6.2
Many Thanks in advance
Mehran Fard
Mehran Fard
Attachments:
niSE.png ‏11 KB

Hi Fardm,
I might try doing a repair on LabVIEW, TestStand and Switch as it sounds like a dll might have become corrupt.
Kind Regards,
Owen.S
Applications Engineer
National Instruments

Similar Messages

USB ports stop working after windows 7 installation via USB Boot camp

topend macbook pro retina 15 model purchased in Jan 2014 ,upto date.OS X 10.9.1
tried installing windows 7 ultimate through boot camp using USB. the installation is fine and smooth. windows 7 ultimate is properly installed but the point where you install the support software through USB all the USB ports die out just before logging in into windows. Also a red light on the headphone jack goes on. NO USB flash drive orUSB device is operational or in other words detected by the mac. Hence neither can I finish the support software installation which has all the necessary drivers nor connect to the internet . tried the SMC/NVRAM reset as instructed by the apple support but no change in the situation.
USB ports fully operational when boot in MAC os .
Another problem I face is when I try connect my iphone 4S to macbook pro via USB it keeps connecting and disconnecting and makes the charging sound repeatedly . The same iphone can connect to other laptops flawlessly.
please help .
Thanks

Since you just bought it, you may want to make a Genius Bar appointment and let them diagnose the issue. Use your warranty. Bring your phone and cable along too.

Coldfusion 64 bit windows installer stops working after recent microsoft update

Coldfusion 64 bit windows installation stops working after recent microsoft updates and how I worked around it.
My question is at the end.
Trying to deploy coldfusion 9 enterprise 64 bit trial version onto a Windows 2003 64 bit datacenter OS with all OS updates from MS (as of 4-7-2011).
Steps taken (remember, this is all 64 bit):
1. Installed the base OS which was slipstreamed with SP2.
2. Checked w/ microsoft and installed 63 OS updates.
3. Launch the CF9 trial exe.
4. As soon as the first screen finishes (the one that looks like it is extracting files) then the second screen pops up (the one that simply says CF Adobe Coldfusion 9) and the progress bar quickly moves 95% to the right and the install application quits. No error, no nothing. No log file either.
5. After a moment of incredulous silence (and retrying/rebooting, etc), I started to google it. I found nothing. However, I did find a post (thanks dspent!) that was helpful in that it told how he was able to get at a log file of sorts, by pre-extracting the coldfusion_9_WWE_win64.exe file and launching the adobe_cf.exe by hand. (Dspent's install snafu was different than mine, but his post was very valuable and got me started in the right direction.)
6. Got a copy of rarunzipper and extracted the coldfusion_9_WWE_win64.exe file.
7. From the windows directory created by step 6, I launched adobe_cf.exe.
8. Same thing (the install application quits. No error, no nothing. No log file either.).
9. I examine the hs_err_pidxxxx.log file (where the xxxx is a number).
10. I see inside that file an ominous message: "A fatal error has been detected by the Java Runtime" then "Problematic frame ntdll.dll" and then "The crash happened outside the Java Virtual Machine in native code".
11. OK, so now I am thinking ntdll.dll !! Native code !! It is like Java is telling me that for some reason it can't dance with the OS.
12. On a hunch, I decided to test a CF install again on a server with just the base install of W3K3 64 SP2 (ie: skipping step 2 above this time).
13. Bingo! That install works.
14. Therefore, one of the 63 patches I had downloaded from MS had triggered a problem with the CF installer.
15. Back on the first server (the one with the MS security patches installed and the one that CF won't install on). In the CF file adobe_cf.lax (one of the files extracted in step 6) there is a line that mentions where the install gets it's java. Find that file, and check java version installer is using. It is using 1.6.0_14-b08.
16. Off to the Java website, and there is a newer version of java (1.6.0_24-b07). Downloaded and installed it.
17. Modify a line in adobe_cf.lax :
   before
     lax.nl.current.vm=resource\\jre\\bin\\java.exe
   after
     lax.nl.current.vm=C:\\program files\\java\\jre6\\bin\\java.exe
(that assumes that you let step 16 install to the default location)
Save the file.
18. Run the install ... ** IT WORKS ** !
Obviously, the built in java provided with the CF installer is no longer compatible with some change introduced by some recent MS update on the W2K3 64b SP2 platform.
And now the interesting part. Although I forced the installer to used the new java, it did not incorporate it into the cf build (ie: in jvm.config, you still see c:/coldfusion9/runtime/jre AND the version of java.exe that is in that directory is the original version, not the newer version I forced the installer to use).
On the surface, CF seems to run OK, but I have not done any application testing yet.
And finally my
** QUESTION **
Would it be appropriate to simply point the java.home var to the new java directory? I see that the directory structures and files are not exactly the same (close though) so I certainly don't want to break things by doing this, but instinct tells me that if the installer broke using the older version, then something else is gonna break down the road if I don't use the new version. On the other hand, the differences in the directories and files is enough that it makes me very nervous, with my limitied java skill set, to make this decision.
Thanks in advance!!
Byron

Hi Byron,
Wow great post no doubt much of the information will be useful for those on Win03 SP2 +. Have to say not come across similar problem on Win08 r2 SP1 +.
So to your question. Adobe security bulletin (http://kb2.adobe.com/cps/894/cpsid_89440.html) recommends running CF8 and CF9 with JVM 1.6.0_24. The bulletin does not say how to do that. I take you installed JDK and not just JRE 1.6.0_24? Post install of JDK follow these steps:
Stop CF - SERVICES.msc stop "ColdFusion 9 Application Server".
Take a copy of CF\runtime\bin\jvm.config - so you got a backup.
Edit CF\runtime\bin\jvm.config find line "java.home=" and comment it out eg:
#java.home=C:/ColdFusion9/runtime/jre
Add new line like so and save jvm.config:
java.home=C:/Program Files/Java/jdk1.6.0_24/jre
Note there the slashes and the location of the JRE (runtime) - you need to point to the one in JDK because the other JRE in C:\Program Files\Java\jre6 will be missing a DLL.
Start CF via SERVICES.msc.
HTH, Carl.

Windows 7 professional backup and restore stop working after installation of acronis true image 2010

HI,
windows 7 professional backup and restore stop working after installation of acronis true image 2010. it generates a error code 0x81000019. please help.
thanks
Song

Sankalp,
I too have the error 0x81000033 when running the full system image backup. I could not assign a drive letter to my 100mb drive with the Disk Management. So, I went into the diskpart and ran the following commands:
diskpart
list disk
DISKPART> list par
Partition ### Type              Size     Offset
Partition 1    System             100 MB 1024 KB           ( 78.2 of 96.0MB free )
Partition 2    Reserved           128 MB   101 MB
Partition 3    Primary             73 GB   229 MB
Partition 4    Recovery           423 MB    74 GB
sel dis 0
list par
select partition 1
assign letter=q
fsutil usn queryjournal q:
fsutil usn deletejournal /D q:
After diskpart, I opened the "My Computer" and see that I have 78.2 of 96.0MB free. Despite that, I ran these commands on the new q: drive:
C:\Windows\System32>q:
Q:\>fsutil usn queryjournal q:
Error: The parameter is incorrect.
The FSUTIL utility requires a local NTFS volume.
Q:\>fsutil usn deletejournal /D q:
Error: The parameter is incorrect.
The FSUTIL utility requires a local NTFS volume.
Q:\>
Any help is appreciated.

PS 6 beta stopped working - after installing my old tablet

PS 6 beta stopped working - after installing my old tablet
Just to let U know, everywhere else (GIMP,Paint etc) there is no problem,
also tablet is fully working and operational,
drivers are up to date,
PS 6 beta brign an error 01 .
Also say about contating support ...
How can I constact support when I Dont have a license or serial number etc..
since it ask me about it while trying to reach support.... pointless! mad!
? What now? should I trash my favorite tablet and buy some junk just because of this BUG?
or will it be solved somehow?
I do believe that nobody will even care about one human and none of programmers will update
database of this program for older tablets,,, but JSUT TO LET U KNOW - its not working.
and free software as GIMP is working just perfectly, and adobe **** is not even opening a program..

oh well, as I mentioned my tablet is old, ( but i thought that new version of photoshop will contain also some parts from old ones for compability, as U said its not working like that o.o ) is is Pentagram Duo Pen (USB)
   I uninstalled tablet drivers and adobe software and reinstalled again without tablet, now it's working so it was a driver that messed up all..
Oh, the error code nr was : 1
i also was suprised but this is what I got from photoshop in error message the rest of it was about contacting adobe.com/support ..blahblahblah
I am still not fully understanding how its possible that so well paid software is not compatble with my super old tablet while even stupid paint is..
I am sure it is complicated, however as U see I am not able to anything else but operate with mouse.. or switch to linux and practice in gimp..
if U wonna to take a look at the file of that driver i will post it here :
(more files on http://download.pentagram.eu/en/drivers/graphic_tablets/duopen_usb/DuoPen_USB_Win2K_XP.zip)
Cheers..
; Installation inf for Pentagram USB Tablet
; (c) Copyright 2000 Pentagram Pte Ltd
[Version]
Signature="$CHICAGO$"
Class=Mouse
;Class=USB
;ClassGUID={36FC9E60-C465-11CF-8056-444553540000}
provider=%MSFT%
DriverVer=08/05/1999
[SourceDisksNames]
1="Pentagram USB Tablet Installation Disk",,,
[SourceDisksFiles]
MGUSBTAB.sys = 1
MGUSBTAB.inf = 1
wintab32.dll=1
wtmgl.exe=1
wtdata=1
mgltab.cpl=1
[Manufacturer]
%MfgName%=ModelSection
[ModelSection]
%USB\VID_081A&PID_1000.DeviceDesc%=MGUSBTAB.Dev, USB\VID_081A&PID_1000
;[PreCopySection]
;HKR,,NoSetupUI,,1
[DestinationDirs]
MGUSBTAB.Files.Ext = 12,
MGUSBTAB.Files.Inf = 17,
MGUSBTAB.Copy             = 11,
; DIRID_SYSTEM
[MGUSBTAB.Dev]
CopyFiles=MGUSBTAB.Files.Ext, MGUSBTAB.Files.Inf, MGUSBTAB.Copy
AddReg=MGUSBTAB.AddReg
[MGUSBTAB.Dev.NT]
CopyFiles=MGUSBTAB.Files.Ext, MGUSBTAB.Files.Inf, MGUSBTAB.Copy
AddReg=MGUSBTAB.AddReg
[MGUSBTAB.Dev.NT.Services]
Addservice = MGUSBTAB, 0x00000002, MGUSBTAB.AddService
[MGUSBTAB.AddService]
DisplayName    = %MGUSBTABLET.SvcDesc%
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 3                  ; SERVICE_DEMAND_START
ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
ServiceBinary = %10%\System32\Drivers\MGUSBTAB.sys
LoadOrderGroup = Base
[MGUSBTAB.AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,MGUSBTAB.sys
;HKLM,"System\Currentcontrolset\Services\mgusbtab\Parameters","MaximumTransferSize",0x1000 1,4096
;HKLM,"System\Currentcontrolset\Services\mgusbtab\Parameters","DebugLevel",0x10001,5
HKLM,%JX_REGISTRY_PATH%,"NumberOfButtons",0x00010003,3
HKLM,%JX_REGISTRY_PATH%,"SampleRate",0x00010003,100
HKLM,%JX_REGISTRY_PATH%,"x1",0x00010001,0
HKLM,%JX_REGISTRY_PATH%,"y1",0x00010001,0
HKLM,%JX_REGISTRY_PATH%,"x2",0x00010001,15240
HKLM,%JX_REGISTRY_PATH%,"y2",0x00010001,12700
HKLM,%JX_REGISTRY_PATH%,"tabletMode",0x00010001,0
HKLM,%JX_REGISTRY_PATH%,"xSens",0x00010001,32768
HKLM,%JX_REGISTRY_PATH%,"ySens",0x00010001,32768
HKLM,%JX_REGISTRY_PATH%,"clickThreshold",0x00010003,40
HKLM,%JX_REGISTRY_PATH%,"x1Phys",0x00010001,0
HKLM,%JX_REGISTRY_PATH%,"x2Phys",0x00010001,15240
HKLM,%JX_REGISTRY_PATH%,"y1Phys",0x00010001,0
HKLM,%JX_REGISTRY_PATH%,"y2Phys",0x00010001,12700
HKLM,%JX_REGISTRY_PATH%,"mappings",0x00000000,"01 02 04 00 00 00 00 00 "
HKLM,%JX_REGISTRY_PATH%,"parameter1",0x00000000,"µŇ¬šŤ–šŚß«žť“š‹Äß©šŤŚ–‘ßÎŃĎÉÄßąŤ’ž‹ĹßÉŇ ť†‹šßť–‘žŤ†"
HKLM,SOFTWARE\Microsoft\Windows\CurrentVersion\Run,"wtmgl",0,"wtmgl.exe"
;for GUID
;HKLM,%JX_REGISTRY_PATH%,FriendlyName,,"Pentagram Serial Tablet"
[MGUSBTAB.Files.Ext]
MGUSBTAB.sys
[MGUSBTAB.Files.Inf]
MGUSBTAB.Inf
[MGUSBTAB.Copy]
wintab32.dll
wtmgl.exe
wtdata
mgltab.cpl
[Strings]
MSFT="Microsoft"
MfgName="Pentagram"
USB\VID_081A&PID_1000.DeviceDesc="Pentagram USB Tablet"
MGUSBTABLET.SvcDesc="USB Tablet driver"
JX_REGISTRY_PATH="System\CurrentControlSet\Services\mgltab\Parameters"

Don't know what to do or who to ask??? GPS stopped working after 4.4.2 Kitkat update.

Don't know what to do or who to ask??? GPS stopped working after 4.4.2 Kitkat update.
I have been on the phone multiple times with Verizon, visited multiple stores and still getting different answers with every different person I talk to...
Since the 4.4.2 update, my phone and my wife's phone (14 or 15 month old SIII's) that worked perfect a couple weeks ago no longer know where they are 95% percent of the time... Location cannot be found and GPS satellites cannot be seen (sometimes after searching for 10 - 20 minutes they will lock on).
And it's not just Google maps, it is all apps that need location (ie. gps status and toolbox, weather channel, etc...)
Google maps has us in the right location 50% of the time but i think that has more to do with 4g and wifi (although i always know the weather and traffic conditions in the next town over now).
Navigation will set up fine in Google maps until you actual move the car. Then it updates location every couple minutes, but usually a couple streets over from where I actually am. Maybe 1 out of every four or five times I try it, it will start working about 15 minutes after I started it (then work flawlessly, so it can actually work sometimes). But if you end the process and start over to see if it really "works", back to square one with it not knowing its location all over again...
I obviously did all the normal trouble shooting fixes with the battery and sim card removals and even did a "recommended factory data reset" on my phone with no luck. After this didn't work I stopped by another verizon store yesterday that has "tech services" that I was told could run some sort of diagnostics on my phone. After I showed the tech all the screen shots i have taken of what was happening while driving, he said it is a software problem and a very common one at that.
I was told I should either buy new phones or switch to the edge program where i can get a new phones. These don't seem like very fair solutions to me considering before the 4.4.2 update our phones worked perfect and they are both in almost perfect condition after 14 or 15 months...
Will there be a fix to this??? Is it a Samsung problem??? Should I be contacting them???

If it is 3GS, you can update it to iOS 5 and it will work.

Adobe Acrobat 9.0 has stopped working (after Start Form Wizard)

Downloaded Trial for Adobe Acrobat 9.0
Tried reinstalling
Latest windows 7 patches
Adobe Acrobat 9.0 has stopped working
(after Start Form Wizard)
Windows can check online for a solution to the problem
details"
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Acrobat.exe
Application Version:    9.0.0.332
Application Timestamp:    4850eb76
Fault Module Name:    MakeAccessible.api
Fault Module Version:    9.0.0.332
Fault Module Timestamp:    4850e54e
Exception Code:    c0000005
Exception Offset:    000e1059
OS Version:    6.1.7600.2.0.0.256.1
Locale ID:    1033
Additional Information 1:    0a9e
Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
Additional Information 3:    0a9e
Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
===============================
===============================
SYSTEM INFORMATION
=========================
System Parameters
Available Physical Memory: 1429660 KB
Available Virtual Memory: 1912212 KB
BIOS Version: DELL   - 42302e31
Default Browser: C:\Program Files\Internet Explorer\iexplore.exe
    Version: 8.00.7600.16385 (win7_rtm.090713-1255)
    Creation Date: 2009/07/13
    Creation Time: 4:43:32 PM
Default Mail: Microsoft Office Outlook
    mapi32.dll
    Version: 1.0.2536.0 (win7_rtm.090713-1255)
Graphics Card: Intel(R) G33/G31 Express Chipset Family
    Version: 8.14.10.1930
    Check: Not Supported
Installed Acrobat: C:\Program Files\Adobe\Acrobat 9.0\Acrobat\Acrobat.exe
    Version: 9.0.0.2008061200
    Creation Date: 2008/06/12
    Creation Time: 2:25:18 AM
Installed Acrobat: C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe
    Version: 9.3.2.163
    Creation Date: 2010/04/03
    Creation Time: 10:57:52 PM
Locale: English (United States)
Monitor:
    Name: Intel(R) G33/G31 Express Chipset Family
    Resolution: 1024 x 768 x 75
    Bits per pixel: 32
OS Manufacturer: Microsoft Corporation
OS Name: Microsoft Windows Vista
OS Version: 6.1.7600
Page File Space: 4194303 KB
Processor: x86 Family 6 Model 23 Stepping 7 GenuineIntel ~2493 Mhz
System Name: DELLINSPIRON
Temporary Directory: C:\Users\alan\AppData\Local\Temp\
Time Zone: Pacific Standard Time
Total Physical Memory: 2097151 KB
Total Virtual Memory: 2097024 KB
User Name: alan
Windows Directory: C:\Windows
Installed Plugins
=================
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\Annots.api
    Version: 9.0.0.2008061200
    Creation Date: 2008/06/12
    Creation Time: 1:59:50 AM
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\EScript.api
    Version: 9.0.0.2008061200
    Creation Date: 2008/06/12
    Creation Time: 2:05:18 AM
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\PPKLite.api
    Version: 9.0.0.0
    Creation Date: 2008/06/12
    Creation Time: 2:08:24 AM
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\SendMail.api
    Version: 9.0.0.2008061200
    Creation Date: 2008/06/12
    Creation Time: 2:17:10 AM
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins\Updater.api
    Version: 9.0.0.2008061200
    Creation Date: 2008/06/12
    Creation Time: 2:00:30 AM

To go along with Michael's suggestion, something like AA9.2 is needed for X64 systems I think. Also, be careful. Acrobat is not licensed for use on a server. Using it as a user is fine, but not as a server application. Read the license carefully.

My iPad 1 has stopped working after trying to instal iOS 5. Can you help restore?

My iPad has stopped working after trying unsuccessfully to instal iOS5. All that's currently showing on the iPad screen is a white USB cable with a thick arrow pointing towards the iTunes logo (black double note within a white rimmed circle and a blue background).I cannot switch it off and have seemingly lost everything that was on it.
Please help!

That means you have to restore the device with iTunes now. So connect the iPad to your computer's iTunes and restore the iPad.
iTunes: Restoring iOS software

NVidia firewall stopped working after nForce drivers upgrade

Just for the record, my nVidia firewall stopped working after I "upgraded" from nForce 4.08 (came with the mobo cd) to 4.24 (latest drivers at the nVidia website).
...damn nVidia.
Anyone else have this problem?

Thanks for the reply. I tried -- to an extent -- what you suggested. Thinking nVidia was smart I went on to installing the 4.24 without removing previous drivers/components. Everything installed except for the network/firewall stuff. I clicked "yes, install nVidia network stuff" and a fatal error occured a few seconds into the installation. I then proceeded to uninstalling the network access manager, followed by a retry of the 4.24 installation: same problem.
However, I never uninstalled the nForce drivers themselves. I will redownload the 4.24 .exe, uninstall everything, and run the .exe. I'll then proceed to report my crappy results here, in this forum.

USB audio DAC stops working after suspend

I didn't update my mediacenter running arch for a few months so I figured i'd reinstall it because of the filesystem, /lib and grub changes. Now after reinstalling I'm running into the issue that my USB audio DAC stops working after a suspend.
After a suspend speaker-test gives me the following error:
[user@mediacenter ~]$ speaker-test -c 2
speaker-test 1.0.25
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
ALSA lib pcm_dmix.c:1068:(snd_pcm_dmix_open) unable to open slave
Playback open error: -77,File descriptor in bad state
I've tried replugging my DAC and restarting ALSA, without any success. I have to reboot to get sound again.
Output of /var/log/pm-suspend.log
za jul 21 19:20:24 CEST 2012: performing suspend
Initial commandline parameters:
za jul 21 19:22:06 CEST 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux mediacenter 3.4.6-1-ARCH #1 SMP PREEMPT Fri Jul 20 08:21:26 CEST 2012 x86_64 GNU/Linux
Module Size Used by
rfcomm 33627 0
bluetooth 190551 3 rfcomm
rfkill 15604 1 bluetooth
r8169 49386 0
acpi_cpufreq 5933 0
mperf 1267 1 acpi_cpufreq
snd_usb_audio 93519 2
snd_hwdep 6300 1 snd_usb_audio
snd_usbmidi_lib 18744 1 snd_usb_audio
snd_rawmidi 18479 1 snd_usbmidi_lib
snd_seq_device 5300 1 snd_rawmidi
snd_pcm 74958 2 snd_usb_audio
snd_page_alloc 7217 1 snd_pcm
snd_timer 18966 2 snd_pcm
mei 32152 0
snd 58997 9 snd_usb_audio,snd_hwdep,snd_timer,snd_pcm,snd_rawmidi,snd_usbmidi_lib,snd_seq_device
usb_storage 44760 0
uas 9285 0
i2c_i801 8180 0
microcode 12185 0
iTCO_wdt 12813 0
coretemp 5654 0
iTCO_vendor_support 1929 1 iTCO_wdt
crc32c_intel 1987 0
joydev 9991 0
soundcore 5410 1 snd
mii 4123 1 r8169
firewire_ohci 31677 0
firewire_core 51552 1 firewire_ohci
pcspkr 1899 0
serio_raw 4653 0
processor 26567 1 acpi_cpufreq
crc_itu_t 1363 1 firewire_core
evdev 9754 5
ext4 424175 3
crc16 1359 2 ext4,bluetooth
jbd2 73919 1 ext4
mbcache 5977 1 ext4
sr_mod 14823 0
sd_mod 29239 5
cdrom 35648 1 sr_mod
usbhid 36430 0
hid 85477 1 usbhid
ahci 20549 4
libahci 20023 1 ahci
uhci_hcd 23404 0
pata_jmicron 2480 0
pata_acpi 3408 0
ata_generic 3295 0
ehci_hcd 41026 0
libata 167611 5 ahci,pata_acpi,libahci,ata_generic,pata_jmicron
scsi_mod 132974 5 uas,usb_storage,libata,sd_mod,sr_mod
usbcore 147565 8 uas,uhci_hcd,snd_usb_audio,usb_storage,snd_usbmidi_lib,ehci_hcd,usbhid
usb_common 954 1 usbcore
i915 438144 4
video 11307 1 i915
button 4502 1 i915
i2c_algo_bit 5391 1 i915
intel_agp 10936 1 i915
intel_gtt 14047 3 i915,intel_agp
drm_kms_helper 33051 1 i915
drm 208958 5 i915,drm_kms_helper
i2c_core 20369 5 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit
total used free shared buffers cached
Mem: 3721220 336284 3384936 0 16624 156204
-/+ buffers/cache: 163456 3557764
Swap: 265068 0 265068
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /etc/pm/sleep.d/90alsa suspend suspend:
/etc/pm/sleep.d/90alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
za jul 21 19:22:07 CEST 2012: performing suspend
za jul 21 19:22:22 CEST 2012: Awake.
za jul 21 19:22:22 CEST 2012: Running hooks for resume
Running hook /usr/lib/pm-utils/sleep.d/99video resume suspend:
/usr/lib/pm-utils/sleep.d/99video resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend:
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led resume suspend:
/usr/lib/pm-utils/sleep.d/95led resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq resume suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock resume suspend:
/usr/lib/pm-utils/sleep.d/90clock resume suspend: success.
Running hook /etc/pm/sleep.d/90alsa resume suspend:
ALSA lib pcm_dmix.c:1068:(snd_pcm_dmix_open) unable to open slave
aplay: main:682: audio open error: File descriptor in bad state
/etc/pm/sleep.d/90alsa resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules resume suspend:
Reloaded unloaded modules.
/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth resume suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:
/usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:
/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
za jul 21 19:22:23 CEST 2012: Finished.
Output of aplay -l
[user@mediacenter ~]$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: DAC [USB Audio DAC], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
What I'm noticing is that after a suspend "Subdevices: 0/1" gets changed to "Subdevices: 1/1".
Any help is much appreciated!
Last edited by Quaith (2012-07-21 17:33:59)

Odysseus wrote:
Unless you can find a way to stop XBMC from using your DAC, I would try hunting down the update which broke it and file a bug report with the appropriate project. https://wiki.archlinux.org/index.php/Do … g_Packages.
I suspect it would be the kernel.
Yes I am suspecting the kernel as well. I'll try to change some options in XBMC to maybe get this working, and if not I'll see how far I can downgrade with the kernel. My last installation was a few months old so I hope it broke not that long ago.
Thanks for the help

VPN stopped working after OS X 10.9.4 update

Hi,
I had a VPN configured for work which has been working forever but stopped working after the 10.9.4 upgrade.
Very basic setup:
L2TP over IPSec
Server address filled out
Account name filled out
Authentication settings
User Authentication - password kept empty, so it prompts for password
Machine authentication through certificate - certificate selected
Advanced
IPv4 over PPP
IPv6 automatic
When connecting after the 10.9.4 update after I entered my password and hitting connect it always says: the L2TP server did not respond .... what changed?
Thanks,
Ruben

I have same problem with L2TP connection.
This is my results, what's the problem?
Start time: 16:39:21 07/22/14
Model Identifier: iMac14,1
System Version: OS X 10.9.4 (13E28)
Kernel Version: Darwin 13.3.0
Boot Mode: Normal
Time since boot: 25 minutes
FileVault: FileVault master keychain appears to be installed
Diagnostic reports
   2014-07-18 Pixelmator crash
   2014-07-18 iPhoto hang
Log
   Jul 21 20:24:52 WARNING: hibernate_page_list_setall skipped 2079840 xpmapped pages
   Jul 21 20:25:23 WARNING: hibernate_page_list_setall skipped 2135869 xpmapped pages
   Jul 21 21:37:20 WARNING: hibernate_page_list_setall skipped 2135869 xpmapped pages
   Jul 21 21:37:51 WARNING: hibernate_page_list_setall skipped 2195473 xpmapped pages
   Jul 21 21:44:00 WARNING: hibernate_page_list_setall skipped 2195473 xpmapped pages
   Jul 21 21:44:31 WARNING: hibernate_page_list_setall skipped 2255089 xpmapped pages
   Jul 21 22:46:37 WARNING: hibernate_page_list_setall skipped 2255089 xpmapped pages
   Jul 21 22:47:08 WARNING: hibernate_page_list_setall skipped 2314686 xpmapped pages
   Jul 21 22:55:04 msdosfs_fat_uninit_vol: error 6 from msdosfs_fat_cache_flush
   Jul 21 22:55:04 jnl: disk1s1: do_jnl_io: strategy err 0x6
   Jul 21 22:55:04 jnl: disk1s1: write_journal_header: error writing the journal header!
   Jul 21 22:55:04 jnl: disk1s1: close: journal 0xffffff801d15ec20, is invalid. aborting outstanding transactions
   Jul 21 22:55:14 jnl: disk1s1: replay_journal: from: 30769152 to: 31651328 (joffset 0x12ad000)
   Jul 21 22:55:15 jnl: disk1s1: journal replay done.
   Jul 21 22:55:57 WARNING: hibernate_page_list_setall skipped 2314686 xpmapped pages
   Jul 21 22:56:28 WARNING: hibernate_page_list_setall skipped 2374599 xpmapped pages
   Jul 21 23:12:03 wl0: Roamed or switched channel, reason #4, bssid f0
   Jul 21 23:13:06 WARNING: hibernate_page_list_setall skipped 2374599 xpmapped pages
   Jul 21 23:13:36 WARNING: hibernate_page_list_setall skipped 2434512 xpmapped pages
   Jul 22 10:42:53 wl0: Roamed or switched channel, reason #2, bssid f0
   Jul 22 10:43:40 CODE SIGNING: cs_invalid_page(0x124458000): p=10284[spindump] final status 0x0, allowing (remove VALID) page
   Jul 22 11:36:45 process FaceTime[10528] caught causing excessive wakeups. Observed wakeups rate (per sec): 151; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45035
   Jul 22 15:18:31 process FaceTime[179] caught causing excessive wakeups. Observed wakeups rate (per sec): 152; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45021
   Jul 22 15:45:12 wl0: Beacon Loss Event
   Jul 22 15:46:13 wl0: Roamed or switched channel, reason #4, bssid f0
Daemons
   com.oracle.java.JavaUpdateHelper
   com.google.keystone.daemon
   com.apple.aelwriter
   com.adobe.fpsaud
Agents
   com.apple.FolderActions.folders
   com.apple.PTPCamera.137664.UUID
   com.github.GitHub.Conduit
   de.novamedia.VodafoneDeviceObserver
   com.maintain.SystemEvents
   com.google.keystone.system.agent
   com.divx.update.agent
   com.divx.dms.agent
   com.vemedio.Snowtape.RadioAgent
   com.spotify.webhelper
   com.plexapp.mediaserver
   com.apple.Safari
   com.apple.FolderActions.enabled
launchd
   /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
   - com.adobe.AAM.Startup-1.0
   /Library/LaunchAgents/com.divx.dms.agent.plist
   - com.divx.dms.agent
   /Library/LaunchAgents/com.divx.update.agent.plist
   - com.divx.update.agent
   /Library/LaunchAgents/com.google.keystone.agent.plist
   - com.google.keystone.system.agent
   /Library/LaunchAgents/com.maintain.LogOut.plist
   - com.maintain.LogOut
   /Library/LaunchAgents/com.maintain.PurgeInactiveMemory.plist
   - com.maintain.PurgeInactiveMemory
   /Library/LaunchAgents/com.maintain.Restart.plist
   - com.maintain.Restart
   /Library/LaunchAgents/com.maintain.ShutDown.plist
   - com.maintain.ShutDown
   /Library/LaunchAgents/com.maintain.Sleep.plist
   - com.maintain.Sleep
   /Library/LaunchAgents/com.maintain.SystemEvents.plist
   - com.maintain.SystemEvents
   /Library/LaunchAgents/de.novamedia.VodafoneDeviceObserver.plist
   - de.novamedia.VodafoneDeviceObserver
   /Library/LaunchDaemons/com.adobe.fpsaud.plist
   - com.adobe.fpsaud
   /Library/LaunchDaemons/com.apple.aelwriter.plist
   - com.apple.aelwriter
   /Library/LaunchDaemons/com.apple.ppp.l2tp.plist
   - com.apple.ppp.l2tp
   /Library/LaunchDaemons/com.github.GitHub.GHInstallCLI.plist
   - com.github.GitHub.GHInstallCLI
   /Library/LaunchDaemons/com.google.keystone.daemon.plist
   - com.google.keystone.daemon
   /Library/LaunchDaemons/com.maintain.AutoLoginUserScreenLocked.plist
   - com.maintain.AutoLoginUserScreenLocked
   /Library/LaunchDaemons/com.maintain.CocktailScheduler.plist
   - com.maintain.cocktail.scheduler
   /Library/LaunchDaemons/com.maintain.HideSpotlightMenuBarIcon.plist
   - com.maintain.HideSpotlightMenuBarIcon
   /Library/LaunchDaemons/com.oracle.java.JavaUpdateHelper.plist
   - com.oracle.java.JavaUpdateHelper
   /Library/LaunchDaemons/com.skype.skypeinstaller.plist
   - com.skype.skypeinstaller
   /Library/LaunchDaemons/net.sourceforge.MonolingualHelper.plist
   - net.sourceforge.MonolingualHelper
   Library/LaunchAgents/com.apple.FolderActions.enabled.plist
   - com.apple.FolderActions.enabled
   Library/LaunchAgents/com.apple.FolderActions.folders.plist
   - com.apple.FolderActions.folders
   Library/LaunchAgents/com.apple.SafariBookmarksSyncer.plist
   - com.apple.Safari
   Library/LaunchAgents/com.plexapp.mediaserver.plist
   - com.plexapp.mediaserver
   Library/LaunchAgents/com.spotify.webhelper.plist
   - com.spotify.webhelper
   Library/LaunchAgents/com.vemedio.Snowtape.RadioAgent.plist
   - com.vemedio.Snowtape.RadioAgent
Startup items
   /Library/StartupItems/IPSecuritasDaemon/IPSecuritasDaemon
   /Library/StartupItems/IPSecuritasDaemon/IPSecuritasMenu.app/Contents/Info.plist
   /Library/StartupItems/IPSecuritasDaemon/IPSecuritasMenu.app/Contents/MacOS/IPSe curitasMenu
   /Library/StartupItems/IPSecuritasDaemon/phase1-down
   /Library/StartupItems/IPSecuritasDaemon/phase1-up
   /Library/StartupItems/IPSecuritasDaemon/racoon
   /Library/StartupItems/IPSecuritasDaemon/StartupParameters.plist
   /Library/StartupItems/MySQLCOM/MySQLCOM
   /Library/StartupItems/MySQLCOM/StartupParameters.plist
Bundles
   /System/Library/Extensions/cdc.kext
   - com.zte.driver.cdc_usb_bus
   /System/Library/Extensions/cdc_ecm_qmi.kext
   - com.zte.driver.cdc_ecm_qmi
   /System/Library/Extensions/CDSDAudioCaptureSupport.kext
   - com.deepseasoftware.driver.CDSDAudioCaptureSupport
   /System/Library/Extensions/EPSONUSBPrintClass.kext
   - com.epson.print.kext.USBPrintClass
   /System/Library/Extensions/HuaweiDataCardDriver.kext
   - com.huawei.driver.HuaweiDataCardDriver
   /System/Library/Extensions/IceraUSBMassStorageBypass.kext
   - com.novamedia.driver.IceraUSB_MSD_Bypass
   /System/Library/Extensions/LPAudioRedirector.kext
   - com.LivestreamProcaster.driver.LPAudioRedirector
   /System/Library/Extensions/NMHuaweiPhonesVTPCDC_106.kext
   - de.novamedia.oem.vodafone.vtp.huawei.cdc
   /System/Library/Extensions/NMLGEDriver_106.kext
   - de.novamedia.driver.NMLGEDriver
   /System/Library/Extensions/NMSamsungDriver_106.kext
   - de.novamedia.driver.NMSamsung
   /System/Library/Extensions/NMSmartplugSCSIDevice_106.kext
   - de.novamedia.driver.NMSmartplugSCSIDevice
   /System/Library/Extensions/NovatelWireless3G.kext
   - com.novatelwireless.driver.3G
   /System/Library/Extensions/NovatelWirelessFilter.kext
   - com.novatelwireless.driver.DisableAutoInstall
   /System/Library/Extensions/NovatelWirelessUSBCDCECMControl.kext
   - com.NovatelWireless.driver.NovatelWirelessUSBCDCECMControl
   /System/Library/Extensions/NovatelWirelessUSBCDCECMData.kext
   - com.NovatelWireless.driver.NovatelWirelessUSBCDCECMData
   /System/Library/Extensions/Option72.kext
   - com.option.driver.Option72
   /System/Library/Extensions/OptionHS.kext
   - com.option.driver.OptionHS
   /System/Library/Extensions/OptionMSD.kext
   - com.option.driver.OptionMSD
   /System/Library/Extensions/OptionQC.kext
   - com.option.driver.OptionQC
   /System/Library/Extensions/Soundflower.kext
   - com.Cycling74.driver.Soundflower
   /System/Library/Extensions/USBExpressCardCantWake_Huawei.kext
   - com.apple.dts.driver.USBExpressCardCantWake
   /System/Library/Extensions/Vodafone.kext
   - com.vodafone.driver
   /System/Library/Extensions/ZTEUSBCDCACMData.kext
   - com.ZTE.driver.ZTEUSBCDCACMData
   /System/Library/Extensions/ZTEUSBMassStorageFilter.kext
   - com.ZTE.driver.ZTEUSBMassStorageFilter
   /Library/Audio/Plug-Ins/Components/A52Codec.component
   - com.shepmater.A52Codec
   /Library/Audio/Plug-Ins/Components/Flip4Mac WMA Import.component
   - net.telestream.wmv.import
   /Library/Internet Plug-Ins/DivX Web Player.plugin
   - com.divx.DivXWebPlayer
   /Library/Internet Plug-Ins/Flash Player.plugin
   - N/A
   /Library/Internet Plug-Ins/googletalkbrowserplugin.plugin
   - com.google.googletalkbrowserplugin
   /Library/Internet Plug-Ins/JavaAppletPlugin.plugin
   - com.oracle.java.JavaAppletPlugin
   /Library/Internet Plug-Ins/o1dbrowserplugin.plugin
   - com.google.o1dbrowserplugin
   /Library/Internet Plug-Ins/OVSHelper.plugin
   - com.divx.OVSHelper
   /Library/Internet Plug-Ins/Silverlight.plugin
   - com.microsoft.SilverlightPlugin
   /Library/PreferencePanes/ADOView.prefPane
   - com.mds.prefPane.ADOView
   /Library/PreferencePanes/AirServer.prefPane
   - com.pratikkumar.airserver-prefs
   /Library/PreferencePanes/Flash Player.prefPane
   - com.adobe.flashplayerpreferences
   /Library/PreferencePanes/Flip4Mac WMV.prefPane
   - net.telestream.wmv.prefpane
   /Library/PreferencePanes/Growl.prefPane
   - com.growl.prefpanel
   /Library/PreferencePanes/MySQL.prefPane
   - com.mysql.prefpane
   /Library/PreferencePanes/Perian.prefPane
   - org.perian.PerianPane
   /Library/QuickTime/AC3MovieImport.component
   - com.cod3r.ac3movieimport
   /Library/QuickTime/DesktopVideoOut.component
   - com.apple.DesktopVideoOut
   /Library/QuickTime/DivX Decoder.component
   - com.DivXInc.DivXDecoder
   /Library/QuickTime/DivX Decoder.component/Contents/Resources
   - com.DivXInc.DivXDecoder
   /Library/QuickTime/DivX Encoder.component
   - com.DivXInc.DivXCodec
   /Library/QuickTime/FCP Uncompressed 422.component
   - N/A
   /Library/QuickTime/Flip4Mac WMV Advanced.component
   - net.telestream.wmv.advanced
   /Library/QuickTime/Flip4Mac WMV Export.component
   - net.telestream.wmv.export
   /Library/QuickTime/Flip4Mac WMV Import.component
   - net.telestream.wmv.import
   /Library/QuickTime/LiveType.component
   - com.apple.LiveType.component
   /Library/QuickTime/Perian.component
   - org.perian.Perian
   /Library/QuickTime/XiphQT.component
   - org.xiph.xiph-qt.xiphqt
   /Library/Widgets/CI Filter Browser.wdgt
   - com.apple.CIFilterBrowser
   Library/Address Book Plug-Ins/SkypeABDialer.bundle
   - com.skype.skypeabdialer
   Library/Address Book Plug-Ins/SkypeABSMS.bundle
   - com.skype.skypeabsms
   Library/Caches/com.apple.Safari/Extensions/Evernote Web Clipper-2.safariextension
   - com.evernote.safari.clipper
   Library/Caches/com.apple.Safari/Extensions/Searchme.safariextension
   - com.spigot.safari.searchme
   Library/InputManagers/Smart Crash Reports/Smart Crash Reports.bundle
   - com.unsanity.smartcrashreports
   Library/InputManagers/Smart Crash Reports/Smart Crash Reports.bundle/Contents/Resources
   - com.unsanity.smartcrashreports
   Library/iTunes/iTunes Plug-ins/CoverVersion.bundle
   - de.imagomat.coverversion
   Library/iTunes/iTunes Plug-ins/MiniLyrics for iTunes.bundle
   - com.crintsoft.minilyrics.itunes
   Library/Widgets/Delicious.wdgt
   - org.wave2.widget.delicious
   Library/Widgets/Earth.wdgt
   - com.stefan.widget.Earth
   Library/Widgets/gRead.wdgt
   - com.phantomgorilla.widget.gRead
   Library/Widgets/IPSecuritas.wdgt
   - com.lobotomo.widget.ipsecuritas
   Library/Widgets/iStat nano.wdgt
   - com.iSlayer.iStatnanoV2.widget
   Library/Widgets/Twidget.wdgt
   - ca.aquabox.widget.twidget
   Library/Widgets/VPN Tracker 5 Widget.wdgt
   - N/A
dylibs
   /usr/lib/libgutenprint.2.0.3.dylib
   /usr/lib/libopengpulib.1.0.0.dylib
   /usr/lib/openlibraries-0.3.0/openassetlib/lib/libopenassetlib_al.0.dylib
   /usr/lib/openlibraries-0.3.0/openassetlib/lib/libopenassetlib_py.0.dylib
   /usr/lib/openlibraries-0.3.0/openassetlib/plugins/libopenassetlib_filesystem_pl ugin.0.dylib
   /usr/lib/openlibraries-0.3.0/openassetlib/plugins/libopenassetlib_sqlite3_plugi n.0.dylib
   /usr/lib/openlibraries-0.3.0/openeffectslib/lib/libopeneffectslib_fx.0.dylib
   /usr/lib/openlibraries-0.3.0/openeffectslib/plugins/libopeneffectslib_colour_ef fect.0.dylib
   /usr/lib/openlibraries-0.3.0/openeffectslib/plugins/libopeneffectslib_gpu_kerne l.0.dylib
   /usr/lib/openlibraries-0.3.0/openeffectslib/plugins/libopeneffectslib_openimage lib_source.0.dylib
   /usr/lib/openlibraries-0.3.0/openeffectslib/plugins/libopeneffectslib_openmedia lib_source.0.dylib
   /usr/lib/openlibraries-0.3.0/openimagelib/lib/libopenimagelib_il.0.dylib
   /usr/lib/openlibraries-0.3.0/openimagelib/lib/libopenimagelib_py.0.dylib
   /usr/lib/openlibraries-0.3.0/openimagelib/plugins/libopenimagelib_3D_lightmap.0 .dylib
   /usr/lib/openlibraries-0.3.0/openimagelib/plugins/libopenimagelib_dds.0.dylib
   /usr/lib/openlibraries-0.3.0/openimagelib/plugins/libopenimagelib_exr.0.dylib
   /usr/lib/openlibraries-0.3.0/openimagelib/plugins/libopenimagelib_hdr.0.dylib
   /usr/lib/openlibraries-0.3.0/openimagelib/plugins/libopenimagelib_quicktime.0.d ylib
   /usr/lib/openlibraries-0.3.0/openimagelib/plugins/libopenimagelib_sgi.0.dylib
   /usr/lib/openlibraries-0.3.0/openimagelib/plugins/libopenimagelib_tga.0.dylib
   /usr/lib/openlibraries-0.3.0/openmedialib/lib/libopenmedialib_ml.0.dylib
   /usr/lib/openlibraries-0.3.0/openmedialib/plugins/libopenmedialib_avformat.0.dy lib
   /usr/lib/openlibraries-0.3.0/openmedialib/plugins/libopenmedialib_glew.0.dylib
   /usr/lib/openlibraries-0.3.0/openmedialib/plugins/libopenmedialib_mlt.0.dylib
   /usr/lib/openlibraries-0.3.0/openmedialib/plugins/libopenmedialib_oil.0.dylib
   /usr/lib/openlibraries-0.3.0/openmedialib/plugins/libopenmedialib_openal.0.dyli b
   /usr/lib/openlibraries-0.3.0/openmedialib/plugins/libopenmedialib_template.0.dy lib
   /usr/lib/openlibraries-0.3.0/openobjectlib/lib/libopenobjectlib_sg.0.dylib
   /usr/lib/openlibraries-0.3.0/openobjectlib/plugins/libopenobjectlib_3ds.0.dylib
   /usr/lib/openlibraries-0.3.0/openobjectlib/plugins/libopenobjectlib_dae.0.dylib
   /usr/lib/openlibraries-0.3.0/openobjectlib/plugins/libopenobjectlib_obj.0.dylib
   /usr/lib/openlibraries-0.3.0/openobjectlib/plugins/libopenobjectlib_tsto.0.dyli b
   /usr/lib/openlibraries-0.3.0/openobjectlib/plugins/libopenobjectlib_x3d.0.dylib
   /usr/lib/openlibraries-0.3.0/openobjectlib/plugins/libopenobjectlib_x3dbz.0.dyl ib
   /usr/lib/openlibraries-0.3.0/openobjectlib/plugins/libopenobjectlib_x3dz.0.dyli b
   /usr/lib/openlibraries-0.3.0/openpluginlib/lib/libopenpluginlib_pl.0.dylib
   /usr/lib/openlibraries-0.3.0/openpluginlib/lib/libopenpluginlib_py.0.dylib
Apps
   /Applications/Google Drive.app
   /Applications/Dropbox.app
Contents of /etc/hosts
   127.0.0.1 localhost
   255.255.255.255 broadcasthost
   ::1             localhost
   fe80::1%lo0 localhost
Contents of /System/Library/LaunchDaemons/com.apple.rpmuxd.plist (Apple binary property list)
   bplist00”      \MachServices_ ProgramArgumentsULabel— _ com.apple.rpmuxd ° _ /usr/libexec/rpmuxd   /58KLN
Font issues: 46
Bad plists
   Library/Preferences/com.AppersEurope.Writhen.plist
   Library/Preferences/com.artificialsolutions.SpaceShip.plist
   Library/Preferences/com.Tallbest.Syllabub.plist
DNS: 8.8.8.8 (static)
User crontab
   # iBackup start
   # min hour mday month wday command
   # iBackup end
Hidden apps
   .apportable/toolchain/macosx/android-sdk/tools/lib/monitor-x86_64/eclipse.app
   .apportable/toolchain/macosx/android-sdk/tools/lib/monitor-x86_64/monitor.app
   .apportable/toolchain/macosx/Profiler/Profiler.app
Restricted files: 10766
Safari extensions
   Evernote Web Clipper
   Searchme
High file counts
   Library/Keychains: 72
Elapsed time (s): 433

Web Queries stop Working after KB2925418

Hi
I am having an issue where a specific web query (to our CRM) we use stops working after the installation of KB2925418.
Our System Info:
Windows 2012 R2
Office 2013
CRM 2011 Update 17
I have done the following (each step is a follow on from the previous, reboot after each step) - no other settings have changed
1) Install Windows 2012 R2 (no updates) and Office 2013 Std (no updates) -
Works
2) Update Office 2013 fully (via Windows Update) - Works
3) Update all Windows updates (via windows Updates) - Doesn't work
4) Uninstall KB2925418 - Works
5) Update to KB2919355 - Doesn't Work
6) Windows Update all remaining - Doesn't Work
Now I assume KB2919355 includes the fixes in KB2925418, which is why it doesn't work.
If I edit the Query via the Connection Properties (on Data Menu) I can view the data, It just does not appear in excel
Anyone had a similar issue ?
Any Idea on a possible fix ? (I have tried a number of IE settings etc, allowed crossing zones etc)
Any help appreciated
Thanks

Hi,
Do the issue only occur the Excel 2013 web query connects the CRM? Have you tried to use the web query connect the other public website (Such as Microsoft website)
The update patch is related to the IE cumulative security, if the issue only occur with accessing CRM, I suppose that there are some compatibility issue between the patch and CRM.
If the issue is occurred with all the web query, I recommend we uninstall the patch and wait for fix.
I'll monitor the issue to check if other customer has the same issue in the forum.
Thanks for your understanding.
George Zhao
TechNet Community Support

Touch screen L2105 always stops working after a few minutes

I have windows 8.1 and the touch screen always stops working after a few minutes- ie. the touch operation via USB, the screen itself is OK.Have tried windows switching power saving off, but no help
charsepp

Hello charsepp,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that the touchscreen stops working after a short period on your HP L2105 Monitor. The first thing you are going to need to do is determine if this is a monitor or PC issue. To do this you should try connecting the monitor to another computer and see if the issue persists.
If the issue does not persist it is the computer, and if your computer is also HP I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running? Is the Windows Version on My Computer 32-bit or 64-bit?
If the issue persists when you try the monitor on another computer then the issue appears to be a physical issue and I think it would be best if you contacted HP technical support for repair options.
US support link to contact options for HP products purchased in the US.
Outside of US support link to contact options for HP products purchased outside the US.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Flash player stops working after a few days.

I'm recently having issues with flash player on IE and Firefox each time a new version is released. This time the flash player stops working after a few days without any reasons. I have asked two other questions and I have tried the solutions but this time they are not working:
http://forums.adobe.com/message/4617987#4617987
http://forums.adobe.com/message/4548211#4548211
Could anyone tell me what the reason is?
I also need links providing Flash player for IE and Firefox which are always updated. I need to first download the installer then install it offline not install it directly from adobe website.
Please help me solve this once forever!
Message was edited by: sia1989

I'd suggest trying a clean install: How do I do a clean install of Flash Player?
For offline installers, please see this help document: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header

My flash player stops working after a reboot.

My flash player stops working after a reboot. i have flash 12.0.044 installed on a dell laptop with windows 7. The flash works fine until the next day when I restart my computer. If I go to control panel / programs and features I notice that the program is still there but the icon has turned blank. If I re-install it works fine until the next reboot. I have asked the IT services company we work with and they have completely ‘rebuild’ my computer. (Installed new windows etc etc) and still the problem won’t go away. I am at a loss. Who can help? Thank you so much in advance. Duncan

I'd suggest trying a clean install: How do I do a clean install of Flash Player?
For offline installers, please see this help document: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header

Switch executive stops working after labview 2009 installation

Similar Messages

Maybe you are looking for