Switch in table T77S0 called "CCURE PC_UI"

There is an entry in table T77S0 called "CCURE PC_UI", which is the PC UI Main switch.
We currently do NOT have this switch turned "on" (so, the value in the table is blank and not "X"). However, we are now 2 years after go-live, and realize that this switch should have been turned on, because we are using both PA30 and ESS to maintain certain master data, such as bank details (IT0009). Without the switch on, the column called "grouping value" in PA0009 is blank for any records added by PA30 - this causes a hard error in ESS. Anyone familiar with this switch knows that if we turn it on, then the grouping value will get populated correctly and ESS will work.
Has anyone ever set this switch to "X" after go-live? What were the consequences?

Hello
The only things to do concern the note 783499:
- set the switch CCURE/PC_UI in the table T77S0 to 'X'
- correct the feature IVWID
- execute the report RPUFACEVIEKN
- execute the report RPUFIXDS
The report RPUFACEVIEKN will only align the field VIEKN according to
the feature IVWID. This won't trigger any retroactivity and this is
only a technical change.
For records created before the indicator was set, the repairing
report RPUFIXDS (the third one) has to be executed.
Thanks and Kind Regards
Ramana

Similar Messages

Concept of Infotype Framework and CCURE:PC_UI switch

Hello,
I'm not using concurrent employment, management of global employee and payroll for global employees. We are using HCM Processes and Forms, and wonder if I should turn on the switch (in T77S0) CCURE:PC_UI. When I turned on or off, I noticed it still executes the new BADI implementation (eg BADI HRPAD00INFTYBL). Similarly, when I set the Permissibility to "Permitted in all circumstances" in the "Assign Check Class and Define Permissibility", the PA30 transaction still accesses the old exits /BADI (e.g. HRPAD00INFTY) along with the new BADI (eg BADI HRPAD00INFTYBL) regardless of the value of CCURE:PC_UI.
1. I find the observation strange. Can someone advice on the significance of this switch, and explain my observation above ?
2. Do I also need to run the reports RPUFACECPRFN, RPUFACEVIEKN and RPUFIXDS as stated in SAP Note 783499 ?
Thank you.
Regards
Kir Chern

Hi,
We faced some issue what u r facing .
Please following step I will definitely resolve your issue.
For this we need to run the Report RPUFIXDS,
Go to T-Code se38, then give "RPUFIXDS" and then execute .
Then in the selection screen give the perner no.
And info type 0009.
Click up on check box "Workflow Active , Distribution (ALE) Active , Dialog Run .
1st click upon Test Run and then Run.
It will show the inconsistency and then again execute , after this come back to selection give same things but now donu2019t click up on TEST Run and then Execute .
it will show the inconsistency and then execute.
This will surely solve you problem

Authorization for LDB PNPCE &PNPPS and table T77S0

Hi folks ,
Im working on a very interesting requirement , I have developed an Ad hoc query , which is reading IT0019 ( Monitoring dates infotype ) with field called task type . I take a test login and give task type which is equal = w . When I was running that query in test login to see security is in place or not . I found that whenever theres two recs in IT0019 with task type W 9 which test login has authorization and W2 ( which test login doesnt have authorization ) its not pulling up any record . its giving no data . to make sure I again went in to Infotype IT0019 and delete the task type (W2 : the one which test login doesnt have authorization ) . then I run the query . it pull up one record . So my question is how can I handle this situation in Adhoc query . I mean logically speaking it should pull up at least one record for which it has authorization . I am using LDB PNPCE .
Moreover , I debug the query and I came to know its reading the the table T77S0 using class : CL_HR_T77S0.
I read the about table (T77S0) , another question if I set another entry in the table with PNPPS and AUTSW. Will it works . Can I control it?
http://help.sap.com/saphelp_erp2005/helpdata/en/84/49ba3b3bf00152e10000000a114084/content.htm
Thanks,
SK

Hello Amit,
you have to run the "copy" action ,while changing OM objects. then only it will effect in IT 0001
if you will click on change then it will not update in PA.
so click on Copy then do the changes and save it. it will update IT 0001.
We had the same issue. if you get any solution then let me know.
OR
Will you try running RHINTE30 Report
do batch input session and run it via SM35
Thanks and Regards
Jaydeep Jadhav

Switch: Condition table B499 cannot be used

Hello,
When trying to create a Access sequence using the condition table 499, (Movement Type) the following error message is occuring:
"Switch: Condition table B499 cannot be used".
When we check the switch(DIMP_GENERAL_APP) relevant for this, the status is "OFF"
Our question is By activating the switch are there any implications?
Kishore

hi, whould you please give some more detail instruction? thanks.

Updating custom table using call transaction

How to update a custom table using Call Transaction method. How can we use Table control (Module Pool) for this purpose).

Vignesh,
Create a table maintenance transaction for ur custom tables. Check this link for ref...
http://allaboutsap.blogspot.com/2007/04/table-maintenance-in-sap-step-by-step.html
And create a BDC recording and code a program accordingly...
regards,
karthik

HT201412 My 3 week old iPhone 4S switched off during a call and won't switch back on. Any suggestions??

My 3 week old iPhone 4S switched off during a call and won't switch back on. Any suggestions??

Sounds like a dead battery. Try plugging it into a charger.

My Iphone 4 will switch on but will not respond as screen frozen (can't slide to switch on or answer calls) I have tried holding for 15 secs to reboot but same problem???

My iphone 4 will switch on and charge, but a lot of the time the screen is frozen (can't slide to switch on or answer calls) I have tried holding for 15secs to reboot but it doesn't clear the problem????

When you say "holding" is it both the sleep switch and the home button until the Apple Logo comes up? If it isn't then I would recomend doing that. If not, turn the phone off and then (while holding the home button) plug it in to iTunes, this will send the phone into recovery mode and will need to be restored from there. Note* this process does have the possibility of losing data if it is not backed up on the computer!!!

Why does an incoming call on my iPhone 5 try to switch to a FaceTime call?

When someone calls my iPhone 5, the call tries to switch to a FaceTime call. This was happening prior to the iOS 7 updates as well. It only happens when someone calls me, not when I place a call. Has anyone else had this happen? I also have had this happen without a case, with an otter box, and with the life proof case.

I have re-posed this question where I had originally posed it - in the FaceTime for Mac community. Here is the link to that discussion:
How do I get FaceTime for Mac to stop ringing after answering an incoming call on my iPhone?
For some reason the admins moved this original question to the Using iPhone community, when the problem almost certainly has nothing to do with iPhone.
Would you do me a favor and follow the link to the new discussion and hit the "I have this question too" below it? I'd really appreciate it. Anything to get this issue some exposure.

Iphone 3gs keeps switching off during phone call showing apple logo

My iphone 3gs keeps switching of during phone calls. The apple logo appears and I have to wait until it switches itself back on, this happens without my help, any ideas please

Try restoring the iPhone. If a normal restore doesn't work, try setting it up as a new device.

Roaming issue - Layer 2 switch CAM table updates

Hi,
We have a setup with 2 WLC2500 and 10 1041 LAP distributed on various sites (3 or 2 per site), using HREAP (local switching, central auth) and AP Groups, for grouping the APs on each site.
On one site everything works fine, roaming was correctly done, and client could communicate inmediatly after the roaming process, but on other site we found that if we roam between the 2 APs found out that even the client get conected to the AP it takes about 300 second (5 minutes) for the client to get traffic forwarding.
Here i´m attaching the debug session for client and l2roam:
*apfMsConnTask_2: Jun 13 11:27:59.198: 9c:02:98:8e:c6:5d Association received from mobile on AP 50:06:04:2a:4a:10
*apfMsConnTask_2: Jun 13 11:27:59.198: 9c:02:98:8e:c6:5d 192.33.1.251 RUN (20) Changing ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1626)
*apfMsConnTask_2: Jun 13 11:27:59.198: 9c:02:98:8e:c6:5d Applying site-specific IPv6 override for station 9c:02:98:8e:c6:5d - vapId 3, site 'PRUVIA', interface 'management'
*apfMsConnTask_2: Jun 13 11:27:59.198: 9c:02:98:8e:c6:5d Applying IPv6 Interface Policy for station 9c:02:98:8e:c6:5d - vlan 0, interface id 0, interface 'management'
*apfMsConnTask_2: Jun 13 11:27:59.198: 9c:02:98:8e:c6:5d Applying site-specific override for station 9c:02:98:8e:c6:5d - vapId 3, site 'PRUVIA', interface 'management'
*apfMsConnTask_2: Jun 13 11:27:59.198: 9c:02:98:8e:c6:5d 192.33.1.251 RUN (20) Changing ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1626)
*apfMsConnTask_2: Jun 13 11:27:59.198: 9c:02:98:8e:c6:5d STA - rates (8): 2 4 11 22 164 48 72 108 12 18 24 96 0 0 0 0
*apfMsConnTask_2: Jun 13 11:27:59.198: 9c:02:98:8e:c6:5d STA - rates (12): 2 4 11 22 164 48 72 108 12 18 24 96 0 0 0 0
*apfMsConnTask_2: Jun 13 11:27:59.198: 9c:02:98:8e:c6:5d Processing WPA IE type 221, length 22 for mobile 9c:02:98:8e:c6:5d
*apfMsConnTask_2: Jun 13 11:27:59.198: 9c:02:98:8e:c6:5d apfMsRunStateDec
*apfMsConnTask_2: Jun 13 11:27:59.198: 9c:02:98:8e:c6:5d apfMs1xStateDec
*apfMsConnTask_2: Jun 13 11:27:59.198: 9c:02:98:8e:c6:5d 192.33.1.251 RUN (20) Change state to START (0) last state RUN (20)
*apfMsConnTask_2: Jun 13 11:27:59.198: 9c:02:98:8e:c6:5d 192.33.1.251 START (0) Initializing policy
*apfMsConnTask_2: Jun 13 11:27:59.198: 9c:02:98:8e:c6:5d 192.33.1.251 START (0) Change state to AUTHCHECK (2) last state RUN (20)
*apfMsConnTask_2: Jun 13 11:27:59.198: 9c:02:98:8e:c6:5d 192.33.1.251 AUTHCHECK (2) Change state to 8021X_REQD (3) last state RUN (20)
*apfMsConnTask_2: Jun 13 11:27:59.198: 9c:02:98:8e:c6:5d 192.33.1.251 8021X_REQD (3) DHCP required on AP 50:06:04:2a:4a:10 vapId 3 apVapId 1for this client
*apfMsConnTask_2: Jun 13 11:27:59.198: 9c:02:98:8e:c6:5d Not Using WMM Compliance code qosCap 00
*apfMsConnTask_2: Jun 13 11:27:59.198: 9c:02:98:8e:c6:5d 192.33.1.251 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 50:06:04:2a:4a:10 vapId 3 apVapId 1
*apfMsConnTask_2: Jun 13 11:27:59.199: 9c:02:98:8e:c6:5d apfPemAddUser2 (apf_policy.c:223) Changing state for mobile 9c:02:98:8e:c6:5d on AP 50:06:04:2a:4a:10 from Associated to Associated
*apfMsConnTask_2: Jun 13 11:27:59.199: 9c:02:98:8e:c6:5d Scheduling deletion of Mobile Station: (callerId: 49) in 1800 seconds
*apfMsConnTask_2: Jun 13 11:27:59.199: 9c:02:98:8e:c6:5d Sending Assoc Response to station on BSSID 50:06:04:2a:4a:10 (status 0) ApVapId 1 Slot 0
*apfMsConnTask_2: Jun 13 11:27:59.199: 9c:02:98:8e:c6:5d apfProcessAssocReq (apf_80211.c:5237) Changing state for mobile 9c:02:98:8e:c6:5d on AP 50:06:04:2a:4a:10 from Associated to Associated
*dot1xMsgTask: Jun 13 11:27:59.247: 9c:02:98:8e:c6:5d Creating a PKC PMKID Cache entry for station 9c:02:98:8e:c6:5d (RSN 0)
*dot1xMsgTask: Jun 13 11:27:59.247: 9c:02:98:8e:c6:5d Initiating WPA PSK to mobile 9c:02:98:8e:c6:5d
*dot1xMsgTask: Jun 13 11:27:59.247: 9c:02:98:8e:c6:5d dot1x - moving mobile 9c:02:98:8e:c6:5d into Force Auth state
*dot1xMsgTask: Jun 13 11:27:59.247: 9c:02:98:8e:c6:5d Skipping EAP-Success to mobile 9c:02:98:8e:c6:5d
*dot1xMsgTask: Jun 13 11:27:59.247: 9c:02:98:8e:c6:5d Starting key exchange to mobile 9c:02:98:8e:c6:5d, data packets will be dropped
*dot1xMsgTask: Jun 13 11:27:59.247: 9c:02:98:8e:c6:5d Sending EAPOL-Key Message to mobile 9c:02:98:8e:c6:5d
   state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
*Dot1x_NW_MsgTask_5: Jun 13 11:27:59.316: 9c:02:98:8e:c6:5d Received EAPOL-Key from mobile 9c:02:98:8e:c6:5d
*Dot1x_NW_MsgTask_5: Jun 13 11:27:59.316: 9c:02:98:8e:c6:5d Received EAPOL-key in PTK_START state (message 2) from mobile 9c:02:98:8e:c6:5d
*Dot1x_NW_MsgTask_5: Jun 13 11:27:59.316: 9c:02:98:8e:c6:5d Stopping retransmission timer for mobile 9c:02:98:8e:c6:5d
*Dot1x_NW_MsgTask_5: Jun 13 11:27:59.317: 9c:02:98:8e:c6:5d Sending EAPOL-Key Message to mobile 9c:02:98:8e:c6:5d
   state PTKINITNEGOTIATING (message 3), replay counter 00.00.00.00.00.00.00.01
*Dot1x_NW_MsgTask_5: Jun 13 11:27:59.375: 9c:02:98:8e:c6:5d Received EAPOL-Key from mobile 9c:02:98:8e:c6:5d
*Dot1x_NW_MsgTask_5: Jun 13 11:27:59.375: 9c:02:98:8e:c6:5d Received EAPOL-key in PTKINITNEGOTIATING state (message 4) from mobile 9c:02:98:8e:c6:5d
*Dot1x_NW_MsgTask_5: Jun 13 11:27:59.375: 9c:02:98:8e:c6:5d apfMs1xStateInc
*Dot1x_NW_MsgTask_5: Jun 13 11:27:59.375: 9c:02:98:8e:c6:5d 192.33.1.251 8021X_REQD (3) Change state to L2AUTHCOMPLETE (4) last state RUN (20)
*Dot1x_NW_MsgTask_5: Jun 13 11:27:59.375: 9c:02:98:8e:c6:5d 192.33.1.251 L2AUTHCOMPLETE (4) DHCP required on AP 50:06:04:2a:4a:10 vapId 3 apVapId 1for this client
*Dot1x_NW_MsgTask_5: Jun 13 11:27:59.375: 9c:02:98:8e:c6:5d Not Using WMM Compliance code qosCap 00
*Dot1x_NW_MsgTask_5: Jun 13 11:27:59.375: 9c:02:98:8e:c6:5d 192.33.1.251 L2AUTHCOMPLETE (4) Plumbed mobile LWAPP rule on AP 50:06:04:2a:4a:10 vapId 3 apVapId 1
*Dot1x_NW_MsgTask_5: Jun 13 11:27:59.375: 9c:02:98:8e:c6:5d apfMsRunStateInc
*Dot1x_NW_MsgTask_5: Jun 13 11:27:59.375: 9c:02:98:8e:c6:5d 192.33.1.251 L2AUTHCOMPLETE (4) Change state to RUN (20) last state RUN (20)
*Dot1x_NW_MsgTask_5: Jun 13 11:27:59.375: 9c:02:98:8e:c6:5d Mobile 9c:02:98:8e:c6:5d associated
*Dot1x_NW_MsgTask_5: Jun 13 11:27:59.375: 9c:02:98:8e:c6:5d 192.33.1.251 RUN (20) Reached PLUMBFASTPATH: from line 4918
*Dot1x_NW_MsgTask_5: Jun 13 11:27:59.375: 9c:02:98:8e:c6:5d Stopping retransmission timer for mobile 9c:02:98:8e:c6:5d
*Dot1x_NW_MsgTask_5: Jun 13 11:27:59.375: 9c:02:98:8e:c6:5d Key exchange done, data packets from mobile 9c:02:98:8e:c6:5d should be forwarded shortly
*Dot1x_NW_MsgTask_5: Jun 13 11:27:59.375: 9c:02:98:8e:c6:5d Sending EAPOL-Key Message to mobile 9c:02:98:8e:c6:5d
   state PTKINITDONE (message 5 - group), replay counter 00.00.00.00.00.00.00.02
*ccxL2RoamTask: Jun 13 11:27:59.376: 9c:02:98:8e:c6:5d Mobile 9c:02:98:8e:c6:5d has unsupported CCX version 0 in [l2roamProcessClientAssociation]
*spamApTask1: Jun 13 11:27:59.418: 9c:02:98:8e:c6:5d Sent EAPOL-Key M5 for mobile 9c:02:98:8e:c6:5d
*Dot1x_NW_MsgTask_5: Jun 13 11:27:59.486: 9c:02:98:8e:c6:5d Received EAPOL-Key from mobile 9c:02:98:8e:c6:5d
*Dot1x_NW_MsgTask_5: Jun 13 11:27:59.486: 9c:02:98:8e:c6:5d Received EAPOL-key in REKEYNEGOTIATING state (message 6) from mobile 9c:02:98:8e:c6:5d
*Dot1x_NW_MsgTask_5: Jun 13 11:27:59.486: 9c:02:98:8e:c6:5d Stopping retransmission timer for mobile 9c:02:98:8e:c6:5d
*ccxL2RoamTask: Jun 13 11:28:16.823: Neighbor List for LRAD 50:06:04:2a:db:80, Slot 1 not found in [l2roamGetNeighborListForSlot].
*ccxL2RoamTask: Jun 13 11:28:16.823: 00000000: 00 36 33 81 84 a6 c8 ac d7 71 50 06 04 2a db 80 .63......qP..*..
*ccxL2RoamTask: Jun 13 11:28:16.823: 00000010: 28 11 50 06 04 2a db 80 0b 00 06 01 06 ab 11 11 (.P..*..........
*ccxL2RoamTask: Jun 13 11:28:16.823: 00000020: 03 b8 02 28 11 50 06 04 2a 4a 10 01 00 07 01 06 ...(.P..*J......
*ccxL2RoamTask: Jun 13 11:28:16.823: 00000030: ab 10 11 03 b8 02                                 ......
*ccxL2RoamTask: Jun 13 11:28:47.441: Neighbor List for LRAD 50:06:04:2a:e0:40, Slot 1 not found in [l2roamGetNeighborListForSlot].
*ccxL2RoamTask: Jun 13 11:28:47.442: 00000000: 00 49 33 81 00 23 14 84 0d 64 50 06 04 2a e0 40 .I3..#...dP..*.@
*ccxL2RoamTask: Jun 13 11:28:47.442: 00000010: 28 11 50 06 04 2a e0 40 0b 00 06 01 06 ab 11 11 (.P..*.@........
*ccxL2RoamTask: Jun 13 11:28:47.442: 00000020: 03 b8 02 28 11 50 06 04 2a de 70 01 00 07 01 06 ...(.P..*.p.....
*ccxL2RoamTask: Jun 13 11:28:47.442: 00000030: ab 10 11 03 b8 02 28 11 50 06 04 2a 47 20 06 00 ......(.P..*G...
*ccxL2RoamTask: Jun 13 11:28:47.442: 00000040: 07 01 06 ab 10 11 03 b8 02                       .........
*ccxL2RoamTask: Jun 13 11:29:27.832: Neighbor List for LRAD 50:06:04:2a:db:80, Slot 1 not found in [l2roamGetNeighborListForSlot].
*ccxL2RoamTask: Jun 13 11:29:27.832: 00000000: 00 36 33 81 84 a6 c8 ac d7 71 50 06 04 2a db 80 .63......qP..*..
*ccxL2RoamTask: Jun 13 11:29:27.832: 00000010: 28 11 50 06 04 2a db 80 0b 00 06 01 06 ab 11 11 (.P..*..........
*ccxL2RoamTask: Jun 13 11:29:27.832: 00000020: 03 b8 02 28 11 50 06 04 2a 4a 10 01 00 07 01 06 ...(.P..*J......
*ccxL2RoamTask: Jun 13 11:29:27.832: 00000030: ab 10 11 03 b8 02                                 ......
*apfMsConnTask_3: Jun 13 11:29:32.375: 9c:02:98:8e:c6:5d Reassociation received from mobile on AP 50:06:04:2a:db:80
*apfMsConnTask_3: Jun 13 11:29:32.375: 9c:02:98:8e:c6:5d 192.33.1.251 RUN (20) Changing ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1626)
*apfMsConnTask_3: Jun 13 11:29:32.375: 9c:02:98:8e:c6:5d Applying site-specific IPv6 override for station 9c:02:98:8e:c6:5d - vapId 3, site 'PRUVIA', interface 'management'
*apfMsConnTask_3: Jun 13 11:29:32.375: 9c:02:98:8e:c6:5d Applying IPv6 Interface Policy for station 9c:02:98:8e:c6:5d - vlan 0, interface id 0, interface 'management'
*apfMsConnTask_3: Jun 13 11:29:32.375: 9c:02:98:8e:c6:5d Applying site-specific override for station 9c:02:98:8e:c6:5d - vapId 3, site 'PRUVIA', interface 'management'
*apfMsConnTask_3: Jun 13 11:29:32.375: 9c:02:98:8e:c6:5d 192.33.1.251 RUN (20) Changing ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1626)
*apfMsConnTask_3: Jun 13 11:29:32.375: 9c:02:98:8e:c6:5d STA - rates (8): 2 4 11 22 164 48 72 108 12 18 24 96 0 0 0 0
*apfMsConnTask_3: Jun 13 11:29:32.375: 9c:02:98:8e:c6:5d STA - rates (12): 2 4 11 22 164 48 72 108 12 18 24 96 0 0 0 0
*apfMsConnTask_3: Jun 13 11:29:32.375: 9c:02:98:8e:c6:5d Processing WPA IE type 221, length 22 for mobile 9c:02:98:8e:c6:5d
*apfMsConnTask_3: Jun 13 11:29:32.375: 9c:02:98:8e:c6:5d 192.33.1.251 RUN (20) Deleted mobile LWAPP rule on AP [50:06:04:2a:4a:10]
*apfMsConnTask_3: Jun 13 11:29:32.375: 9c:02:98:8e:c6:5d Updated location for station old AP 50:06:04:2a:4a:10-0, new AP 50:06:04:2a:db:80-0
*apfMsConnTask_3: Jun 13 11:29:32.375: 9c:02:98:8e:c6:5d apfMsRunStateDec
*apfMsConnTask_3: Jun 13 11:29:32.375: 9c:02:98:8e:c6:5d apfMs1xStateDec
*apfMsConnTask_3: Jun 13 11:29:32.375: 9c:02:98:8e:c6:5d 192.33.1.251 RUN (20) Change state to START (0) last state RUN (20)
*apfMsConnTask_3: Jun 13 11:29:32.375: 9c:02:98:8e:c6:5d 192.33.1.251 START (0) Initializing policy
*apfMsConnTask_3: Jun 13 11:29:32.375: 9c:02:98:8e:c6:5d 192.33.1.251 START (0) Change state to AUTHCHECK (2) last state RUN (20)
*apfMsConnTask_3: Jun 13 11:29:32.375: 9c:02:98:8e:c6:5d 192.33.1.251 AUTHCHECK (2) Change state to 8021X_REQD (3) last state RUN (20)
*apfMsConnTask_3: Jun 13 11:29:32.375: 9c:02:98:8e:c6:5d 192.33.1.251 8021X_REQD (3) DHCP required on AP 50:06:04:2a:db:80 vapId 3 apVapId 1for this client
*apfMsConnTask_3: Jun 13 11:29:32.375: 9c:02:98:8e:c6:5d Not Using WMM Compliance code qosCap 00
*apfMsConnTask_3: Jun 13 11:29:32.375: 9c:02:98:8e:c6:5d 192.33.1.251 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 50:06:04:2a:db:80 vapId 3 apVapId 1
*apfMsConnTask_3: Jun 13 11:29:32.375: 9c:02:98:8e:c6:5d apfPemAddUser2 (apf_policy.c:223) Changing state for mobile 9c:02:98:8e:c6:5d on AP 50:06:04:2a:db:80 from Associated to Associated
*apfMsConnTask_3: Jun 13 11:29:32.375: 9c:02:98:8e:c6:5d Scheduling deletion of Mobile Station: (callerId: 49) in 1800 seconds
*apfMsConnTask_3: Jun 13 11:29:32.376: 9c:02:98:8e:c6:5d Sending Assoc Response to station on BSSID 50:06:04:2a:db:80 (status 0) ApVapId 1 Slot 0
*apfMsConnTask_3: Jun 13 11:29:32.376: 9c:02:98:8e:c6:5d apfProcessAssocReq (apf_80211.c:5237) Changing state for mobile 9c:02:98:8e:c6:5d on AP 50:06:04:2a:db:80 from Associated to Associated
*apfMsConnTask_3: Jun 13 11:29:32.409: 9c:02:98:8e:c6:5d Updating AID for REAP AP Client 50:06:04:2a:db:80 - AID ===> 2
*dot1xMsgTask: Jun 13 11:29:32.418: 9c:02:98:8e:c6:5d Creating a PKC PMKID Cache entry for station 9c:02:98:8e:c6:5d (RSN 0)
*dot1xMsgTask: Jun 13 11:29:32.418: 9c:02:98:8e:c6:5d Initiating WPA PSK to mobile 9c:02:98:8e:c6:5d
*dot1xMsgTask: Jun 13 11:29:32.418: 9c:02:98:8e:c6:5d dot1x - moving mobile 9c:02:98:8e:c6:5d into Force Auth state
*dot1xMsgTask: Jun 13 11:29:32.419: 9c:02:98:8e:c6:5d Skipping EAP-Success to mobile 9c:02:98:8e:c6:5d
*dot1xMsgTask: Jun 13 11:29:32.419: 9c:02:98:8e:c6:5d Starting key exchange to mobile 9c:02:98:8e:c6:5d, data packets will be dropped
*dot1xMsgTask: Jun 13 11:29:32.419: 9c:02:98:8e:c6:5d Sending EAPOL-Key Message to mobile 9c:02:98:8e:c6:5d
   state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
*Dot1x_NW_MsgTask_5: Jun 13 11:29:32.475: 9c:02:98:8e:c6:5d Received EAPOL-Key from mobile 9c:02:98:8e:c6:5d
*Dot1x_NW_MsgTask_5: Jun 13 11:29:32.475: 9c:02:98:8e:c6:5d Received EAPOL-key in PTK_START state (message 2) from mobile 9c:02:98:8e:c6:5d
*Dot1x_NW_MsgTask_5: Jun 13 11:29:32.475: 9c:02:98:8e:c6:5d Stopping retransmission timer for mobile 9c:02:98:8e:c6:5d
*Dot1x_NW_MsgTask_5: Jun 13 11:29:32.475: 9c:02:98:8e:c6:5d Sending EAPOL-Key Message to mobile 9c:02:98:8e:c6:5d
   state PTKINITNEGOTIATING (message 3), replay counter 00.00.00.00.00.00.00.01
*Dot1x_NW_MsgTask_5: Jun 13 11:29:32.514: 9c:02:98:8e:c6:5d Received EAPOL-Key from mobile 9c:02:98:8e:c6:5d
*Dot1x_NW_MsgTask_5: Jun 13 11:29:32.514: 9c:02:98:8e:c6:5d Received EAPOL-key in PTKINITNEGOTIATING state (message 4) from mobile 9c:02:98:8e:c6:5d
*Dot1x_NW_MsgTask_5: Jun 13 11:29:32.514: 9c:02:98:8e:c6:5d apfMs1xStateInc
*Dot1x_NW_MsgTask_5: Jun 13 11:29:32.514: 9c:02:98:8e:c6:5d 192.33.1.251 8021X_REQD (3) Change state to L2AUTHCOMPLETE (4) last state RUN (20)
*Dot1x_NW_MsgTask_5: Jun 13 11:29:32.515: 9c:02:98:8e:c6:5d 192.33.1.251 L2AUTHCOMPLETE (4) DHCP required on AP 50:06:04:2a:db:80 vapId 3 apVapId 1for this client
*Dot1x_NW_MsgTask_5: Jun 13 11:29:32.515: 9c:02:98:8e:c6:5d Not Using WMM Compliance code qosCap 00
*Dot1x_NW_MsgTask_5: Jun 13 11:29:32.515: 9c:02:98:8e:c6:5d 192.33.1.251 L2AUTHCOMPLETE (4) Plumbed mobile LWAPP rule on AP 50:06:04:2a:db:80 vapId 3 apVapId 1
*Dot1x_NW_MsgTask_5: Jun 13 11:29:32.515: 9c:02:98:8e:c6:5d apfMsRunStateInc
*Dot1x_NW_MsgTask_5: Jun 13 11:29:32.515: 9c:02:98:8e:c6:5d 192.33.1.251 L2AUTHCOMPLETE (4) Change state to RUN (20) last state RUN (20)
*Dot1x_NW_MsgTask_5: Jun 13 11:29:32.515: 9c:02:98:8e:c6:5d Mobile 9c:02:98:8e:c6:5d associated
*Dot1x_NW_MsgTask_5: Jun 13 11:29:32.515: 9c:02:98:8e:c6:5d 192.33.1.251 RUN (20) Reached PLUMBFASTPATH: from line 4918
*Dot1x_NW_MsgTask_5: Jun 13 11:29:32.515: 9c:02:98:8e:c6:5d Stopping retransmission timer for mobile 9c:02:98:8e:c6:5d
*Dot1x_NW_MsgTask_5: Jun 13 11:29:32.515: 9c:02:98:8e:c6:5d Key exchange done, data packets from mobile 9c:02:98:8e:c6:5d should be forwarded shortly
*Dot1x_NW_MsgTask_5: Jun 13 11:29:32.515: 9c:02:98:8e:c6:5d Sending EAPOL-Key Message to mobile 9c:02:98:8e:c6:5d
   state PTKINITDONE (message 5 - group), replay counter 00.00.00.00.00.00.00.02
*ccxL2RoamTask: Jun 13 11:29:32.516: 9c:02:98:8e:c6:5d Mobile 9c:02:98:8e:c6:5d has unsupported CCX version 0 in [l2roamProcessClientAssociation]
*spamApTask5: Jun 13 11:29:32.558: 9c:02:98:8e:c6:5d Sent EAPOL-Key M5 for mobile 9c:02:98:8e:c6:5d
*Dot1x_NW_MsgTask_5: Jun 13 11:29:32.601: 9c:02:98:8e:c6:5d Received EAPOL-Key from mobile 9c:02:98:8e:c6:5d
*Dot1x_NW_MsgTask_5: Jun 13 11:29:32.601: 9c:02:98:8e:c6:5d Received EAPOL-key in REKEYNEGOTIATING state (message 6) from mo

Already check everything you said, but no luck. Also check on another site and found out that could be a mac learning/updating issue with HP procurve 2510 switches. When a client roams from AP1 to AP2, on the switch the mac table entry for the client does not update to the port where AP2 is. After the mac-aging-time on the HP Procurve switch ends, the mac updates correctly and the traffic start going fine. Any ideas on how can i deal with this issue? Any configuration help for the WLC controller or APs? HP switches are configured as default (out-of-the-box).

Unable to Capture ALV output in an Internal Table, after CALL TRANSACTION

Dear all,
My requirement is to run multiple materials in T-code CK86_99 but as we know CK86_99 is only adequate to one material at a time.
So, I want to capture the Output of the T-code in my Internal table with respect to all the Material Numbers I use in the Select-Options of my Z Program.
Below is the Code I developed so far, but the Class
cl_salv_bs_runtime_info=>get_data_ref(
        IMPORTING r_data = lf_ref ).
is not capturing the Ouput...
Please have a look and enlighten me how it could be solved.
TABLES : mara.
DATA : BEGIN OF wa_mara,
matnr TYPE mara-matnr,
END OF wa_mara.
DATA: it_bdcdata TYPE TABLE OF bdcdata,
      wa_it_bdcdata LIKE LINE OF it_bdcdata,
      it_mara LIKE TABLE OF wa_mara.
*      BELNR(10).
FIELD-SYMBOLS:<fs_tab> TYPE ANY TABLE,
<fs_line> TYPE any.
DATA:lf_ref TYPE REF TO data,
     lf_ref1 TYPE REF TO data.
SELECT-OPTIONS so_matnr FOR mara-matnr.
PARAMETERS p_werks LIKE t001w-werks.
*BELNR = 'Z92'. " Give Document Number here
SELECT matnr FROM mara INTO TABLE it_mara WHERE matnr IN so_matnr.
DATA opt TYPE ctu_params.
LOOP AT it_mara INTO wa_mara.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-program = 'SAPMKKB0'.
wa_it_bdcdata-dynpro   = '0300'.
wa_it_bdcdata-dynbegin = 'X'.
APPEND wa_it_bdcdata TO it_bdcdata.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-fnam = 'BDC_CURSOR'.
wa_it_bdcdata-fval = 'KKB0-MATNR'.
APPEND wa_it_bdcdata TO it_bdcdata.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-fnam = 'KKB0-MATNR'.
wa_it_bdcdata-fval = wa_mara-matnr.
APPEND wa_it_bdcdata TO it_bdcdata.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-fnam = 'BDC_CURSOR'.
wa_it_bdcdata-fval = 'KKB0-WERKS'.
APPEND wa_it_bdcdata TO it_bdcdata.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-fnam = 'KKB0-WERKS'.
wa_it_bdcdata-fval = p_werks.
APPEND wa_it_bdcdata TO it_bdcdata.
CLEAR wa_it_bdcdata.
wa_it_bdcdata-fnam = 'BDC_OKCODE'.
wa_it_bdcdata-fval = 'OSNY'."'ONLI'."=CRET'.
APPEND wa_it_bdcdata TO it_bdcdata.
* CLEAR wa_it_bdcdata.
* wa_it_bdcdata-program = 'SAPLKKRSOO'.
* wa_it_bdcdata-dynpro   = '0100'.
* wa_it_bdcdata-dynbegin = 'X'.
* APPEND wa_it_bdcdata TO it_bdcdata.
* CLEAR wa_it_bdcdata.
* wa_it_bdcdata-fnam = 'BDC_OKCODE'.
* wa_it_bdcdata-fval = 'BACK'."=CRET'.
* APPEND wa_it_bdcdata TO it_bdcdata.
* CLEAR wa_it_bdcdata.
* wa_it_bdcdata-program = 'SAPMKKB0'.
* wa_it_bdcdata-dynpro   = '0300'.
* wa_it_bdcdata-dynbegin = 'X'.
* APPEND wa_it_bdcdata TO it_bdcdata.
* CLEAR wa_it_bdcdata.
* wa_it_bdcdata-fnam = 'BDC_OKCODE'.
* wa_it_bdcdata-fval = 'EXIT'."=CRET'.
* APPEND wa_it_bdcdata TO it_bdcdata.
opt-dismode = 'N'.
cl_salv_bs_runtime_info=>set(
    EXPORTING display = abap_false
              metadata = abap_true
data     = abap_true ).
CALL TRANSACTION 'CK86_99' USING it_bdcdata OPTIONS FROM opt.
TRY.
cl_salv_bs_runtime_info=>get_data_ref(
        IMPORTING r_data = lf_ref ).
      ASSIGN lf_ref->* TO <fs_tab>.
    CATCH cx_salv_bs_sc_runtime_info.
      MESSAGE 'Unable to retrieve ALV data' TYPE 'E'.
ENDTRY.
cl_salv_bs_runtime_info=>clear_all( ).
IF <fs_tab> IS ASSIGNED.
    CREATE DATA lf_ref1 LIKE LINE OF <fs_tab>.
    ASSIGN lf_ref1->* TO <fs_line>.
ENDIF.
*LOOP AT <FS_TAB> ASSIGNING <FS_LINE>.
*ENDLOOP.

Hi Abhay,
      If you go to Transaction code SE93, enter the tcode "CK86_99" and click display, you may see the default value for transaction is "KKBB" and the screen field for P_SCREEN = 0300, P_TCODE = ck86_99.
      You may need to copy the transaction code "KKBB" and go to SE93 again, enter the tcode for "KKBB" then click display, now you may see the program name is "RKKB1000".
      Hope this answer your question.
Thanks
Hock Lin

XML to ABAP internal table with CALL TRANSFORMATION

I can't create a transformation that allow passing next XML file to an internal table:
Please, I need someone could help me, because I don t have XML knowledge
<< Moderator message - Everyone's problem is important. But the answers in the forum are provided by volunteers. Please do not ask for help quickly. >>
Kind regards,
Edited by: Rob Burbank on Jul 21, 2011 4:02 PM

Hi Gastón Juarez,
sorry, didn't see your post, you should have linked the previous to this one
If we create a ZZZ transformation of type ST, it would be something like this (I didn't test). Note that I concatenated the date and time, because field operations in ST are not possible (we should use XSLT instead, but it's counter performant):
... (here the usual header)
<tt:root name="ABAP_X"/>
<tt:template>
<corailExport xmlns= " http://www.abc.com/corailExport_Transcou201D
xmlns: xsi= " http://www.w3.org/2001/XMLSchema-instanceu201D
xsi: schemaLocation= " http://www.abc.com/corailExport_Transco corailExport_Transco.xsd u201C>
    <exportDate><tt:skip></tt:skip></exportDate>
    <tt:loop ref=".ABAP_X" name="line">
      <transcodification>
             <tt:attribute name="applyingDate" value-ref="$line.APPLYING_DATE"></tt:attribute>
        <previousCofor><tt:value ref="$line.OLD_COFOR"></tt:value></previousCofor>
        <newCofor><tt:value ref="$line.NEW_COFOR"></tt:value></newCofor>
      </transcodification>
    </tt:loop>
</corailExport>
</tt:template>
The program:
TYPES : BEGIN OF ty_x,
applying_date TYPE string,
old_cofor TYPE lifnr,
new_cofor TYPE lifnr,
END OF ty_x.
DATA l_xml TYPE string.
DATA lt_x TYPE TABLE OF ty_x.
l_xml = 'your xml'.
CALL TRANSFORMATION zzz
   SOURCE XML l_xml
   RESULT abap_x = lt_x.
BR
Sandra

How to use SYS_REFCURSOR as a table in calling sp

hi gurus,
here i have 2 sp in which i m calling GET_OPREF inside GET_REFCALL. and in GET_REFCAL i want to use output cursou as a table .
plz help me ....
CREATE OR REPLACE PROCEDURE GET_OPREF
(p_cursor OUT SYS_REFCURSOR )
is
begin
open p_cursor FOR
    select 10 amt from dual union all
    select 20 amt from dual union all
    select 30 amt from dual ;
end GET_OPREF ;
CREATE OR REPLACE PROCEDURE GET_REFCALL
is
c_cursor   SYS_REFCURSOR ;
r_emp      get_2%rowtype ;
   v_tot int ;
begin
GET_OPREF(c_Cursor);
select sum (amt) into v_tot from c_Cursor; -- *here i want to user cursor as a table*
    dbms_output.put_line(v_tot );
end get_refcall ;Edited by: user12108669 on Dec 1, 2009 5:03 AM
Edited by: user12108669 on Dec 1, 2009 5:09 AM

After you run the procedure your cursor is open. You can fetch it right away and use it like you would use a regular cursor.
SQL> set serveroutput on
SQL> CREATE OR REPLACE PACKAGE type_pack AS
2 type t_cur is ref cursor;
3 type t_tab is table of number;
4 END type_pack;
5 /
Package created.
SQL> CREATE OR REPLACE procedure test_ref(cur_output out sys_refcursor) i
2 begin
3    open cur_output for
4    with test as
5      (select 1 num from dual
6       union select 2 num from dual
7       union select 3 num from dual)
8      select num
9        from test;
10 end;
11 /
Procedure created.
SQL> CREATE OR REPLACE procedure run_test is
2    cur_test sys_refcursor;
3    tab_cur type_pack.t_tab;
4 begin
5    dbms_output.put_line('running...');
6    test_ref(cur_test);
7    fetch cur_test bulk collect
8      into tab_cur;
9    for i in 1 .. tab_cur.count
10    loop
11    dbms_output.put_line(tab_cur(i));
12    end loop;
13 end;
14 /
Procedure created.
SQL> exec run_test;
running...
1
2
3
PL/SQL procedure successfully completed.
SQL>

Export Internal table by calling static method

Hi friends,
Can u please tell me how to get internal table in export parameter by calling static method.
OR can u tell me how to declare internal table in method parameter.
Thanks in advance

Raja's method will work for all tables irrespective of the structure and is the best possible approach. However, if your requirement is simple and you do not have to deal with a lot many tables,
1. Create a Type-Pool, suppose ztypl
2. Within the type pool, declare a Structure type,
TYPES: BEGIN OF ztypl_struct1,
         "Place your fields here
       END OF ztypl_strict1,
       "Create a table of type ztypl_struct1 here
       ztypl_table1 TYPE TABLE OF ztypl_struct1.
Use "ZTYPL_TABLE1" as the "Associated type" in your method's Parameter definition in SE24.
eg.
IT_TABLE      TYPE     ZTYPL_TABLE1
If you are writing your class in an include,
    METHODS my_method1
      IMPORTING
        it_table1   TYPE ztypl_table1.
Do remember to include
TYPE-POOLS: ztypl.
in your class's Constructor / Include program.
Please award points if helpful.
Regards,
Ryan
Message was edited by:
        Ryan Cannel

EA1 - bug: worksheet not updated when switching between tables of same name

Consider this scenario: two schemas, A, B. Each schema has a table X.
Look at A.X data by selecting A/Tables/X in the connection list and clicking the Data tab.
Now immediately look at B.X data by selecing B/Tables/X in the connection list.
Bug: the worksheet viewer does not switch to B.X, but still shows A.X.
Workaround: Click to another table before going from A.X to B.X.

I had the same issue (bug: showing data in tables with same name, 2 different databases but I can't reproduce either...
K.

Switch in table T77S0 called "CCURE PC_UI"

Similar Messages

Maybe you are looking for