Switch layout suggestion

Hello,
my company is planning to move the server room between floors and, with this opportunity I'd like to review the switch layout in order to improve it.
After some "scouting" (Well, I'm not a networking expert) I came up with the following layout
Hello,
my company is planning to move the server room between floors and, with this opportunity I'd like to review the switch layout in order to improve it.
After some "scouting" (Well, I'm not a networking expert) I came up with the following layout
Starting from top:
- my firewall comes with an internal NIC that I will connect to the main switch (Linksys SGE2000 - SWITCH0) connected with the uplink port (using a Cat5e cable or a fiber cable)to another SGE2000 (SWITCH1) acting as a bigger single unit (to which I will connect all the servers)
- The lower layer are 3 switches
- SWITCH2 - Linksys SLM48G 10/100
- SWITCH3 - 3Com 48p 10/100
- SWITCH4 - 2x 3Com 24p 10/100 Stacked with a stacking module (old but rock-solid)
that will serve all LAN clients (Desktops, notebooks, printers, voip phones etc...)
Does this configuration can be considered as "valid"? (Blue and green cables are my personal redundancy concept:))
Is it recommended also to inter connect SWITCH2-3-4 between themselves?
Thanks in advance for any suggestion!
Renato

Prodeguerriero wrote:
Hi there. Something strange has happened to me using my Macbook Pro. My Hard Drive disappeared from desktop and finder. I found out that somehow it has the "hidden" flag. Once I found this out, I tried to erase it but, when the terminal asks me my password, it doesn't accept any input at all. Any key I press, or any string I try to copy doesn't appear.
that's normal and is a security feature.
to make your drive visible enter the following terminal command
sudo chflags 0 /volumes/*
The only thing I can do is press enter, receiving the "wrong password" warning. I tried to switch keyboard layout but nothing happens.
Any suggestion?

Similar Messages

Subnet config and switch layout for windows 2012 ISCSI server

I would like to ask about subnet design and switch layout in regards to using a Windows 2012 ISCSI solution. When you guys design subnets for ISCSI configurations do you use one subnet or multiple subnets? Also do you link the switches together when
designing your ISCSI layouts? These types of things are normally discussed in vendor deployment guides. However, I have not come across a best practices guide for deploying Server 2012 ISCSI.

I would like to ask about subnet design and switch layout in regards to using a Windows 2012 ISCSI solution. When you guys design subnets for ISCSI configurations do you use one subnet or multiple subnets? Also do you link the switches together
when designing your ISCSI layouts? These types of things are normally discussed in vendor deployment guides. However, I have not come across a best practices guide for deploying Server 2012 ISCSI.
For iSCSI you typically create a separate subnets around physical NICs you use for iSCSI traffic (assuming they are used by iSCSI target for MPIO of course). Here are few guides on how to do that (some for Windows Server 2008 R2 but you can ignore that fact
as target itself did not change much and concepts are still the same). See:
Configure iSCSI MPIO on Windows (full)
http://blogs.technet.com/b/migreene/archive/2009/08/29/3277914.aspx
(make sure you have at leas one connection before you try to enable MPIO)
Setting up a Target and Initiator
http://www.server-log.com/blog/2011/7/26/setting-up-an-microsoft-iscsi-target-and-initiator-using-mpi.html
You need however be aware of a couple of facts...
1) MSFT does not see much future in iSCSI and is replacing it with SMB3 where it can. So if you want to use iSCSI to provide shared storage to your guest VMs you need to use shared VHDX hosted on SMB3 share, see:
Shared VHDX for guest VM Cluster
http://technet.microsoft.com/en-us/library/dn265980.aspx
If you plan to use iSCSI to host CSV and VM images there you again can use SMB3 share, see:
Hyper-V over SMB
http://technet.microsoft.com/en-us/library/jj134187.aspx
That's both simpler to manage (you don't configure anything except teaming for NICs to enable SMB Multichannel and create a shared folder in a few clicks) and faster: MSFT iSCSI target is not cached @ server side while (OK, Hyper-V ovens VMs in a pass-thru
mode but other users typically don't do that). SQL Server is the same as Hyper-V in terms of SMB3 support, Windows clusters support SMB3 share as a witness and so on.
2) That's a single point of failure. Think about using SoFS instead of a single SMB3 share and think about clustering your target (you'll need a separate fault tolerant back end of that) to increase uptime. See:
MSFT iSCSI Target Failover Cluster
http://techontip.wordpress.com/2011/05/03/microsoft-iscsi-target-cluster-building-walkthrough/
Good luck! :)
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Switch Layout in SU53 screen

Hi All,
We are on ECC 5.0. I knew that there will be a button in SU53 screen to change the layout from a Classic to Tree structure and vice versa. I also know about the parameter that can be set in user's account parameters for changing this.
But, I can't see the Switch Layout button in the SU53 screen irrespective of the user and the parameter setting.
I can see the button in ECC 6.0.
Please help me to switch layout in Ecc 5.0.
Thanks
Vijay

Hi,
SAP Note 968915 mentions about absence of switch layout button. Please check if it's applicable for your patch levels and system release.
Also, SAP Note 1008990 is to be followed up in case the one above solves your issue.
Award points if found usefull.
regards, Shantanu

How to add keyboard layout and define shortcut to switch layouts

Hello there people of Arch!
How can i add greek layout to my laptop and how can i set "alt+shift" as the shortcut to switch between layouts?
I tried to search but i couldn't find something useful!

Inxsible wrote:
sepuku wrote:
Inxsible wrote:What I gave you there was the guide itself.
What you gave me there is something generic not a guide(telling do "this" and "that" without telling how "this" and "that" is actually done is not a guide).Since i ask you how i'm supposed to do something am asking for specific info.
I'm using gnome.Is there a way to do it using the graphical environment?I don't have time this days to learn writing scripts cause i really need the greek layout for my studies and there's little time.
Thank you again for your reply!
Aah !!
Why didn't you say you wanted everything handed out to you on a platter !!!
Aaaah why didn't you say you are full of complexes?Thank you for your guide!That really helped me!I just asked if there's is guide in the forum 'cause i searched and couldn't find any info.And no what you gave me is not a guide.Could you just answer this without pretending the smart?Or this is just to difficult?Well anyway no hard feelings I don't care.
Am not going to reply to anything else you say cause you are ironic!I'll just wait if there is a more polite answer!
Peace to your complexes.

Making the switch - any suggestions?

So, I did it. I finally ordered a Mac (Mini) and am making the switch from MS/Intel to Apple. My Mini isn't even here yet (due next week), but I have been browsing the forums here to get an idea of any pitfalls I need to avoid, suggestions that look like a good idea, etc...
So, I ask the forum -- what do you suggest? I am fairly computer-literate (built my last PC from pieces), but have absolutely no experience with Apple/Mac/OS X...
Any books to learn the new lingo? Any apps that will make the transition a little smoother? While I am excited in the switch, there is some trepidation in learning a new language...
Thanks in advance...
mac mini, 1.66 Core 2 Duo, 2 Gb RAM Mac OS X (10.4.8)

Blankmange, welcome! And congrats on your choice to switch.
We can probably give tips that are better directed if you tell us a bit about how you used your PC, what programs and tasks you did with it, etc. And what you want to do with your new Mac.
Some tips up front:
1) The Mac equivalent of CTL-ALT-DEL to get the attention of a non-responsive program is Apple-Option-ESC. Or WinKey-Alt-ESC, if you are using Windows keyboard. The "Apple" key is also referred to as the "Cmd" or "Command" key. Or the "squiggle" key.
2) Don't rename your home folder, ie the one with the House icon.
3) Stay out of the iPhoto Library folder. It's contents are best used via the iPhoto program.
A thread on how to be a smart Mac user here:
http://discussions.apple.com/click.jspa?searchID=-1&messageID=4086431
4) 512 Meg RAM on an Intel Mac is not a good match for MS Office. Need 1 Gig for decent performance. With 2 Gig, the Mini really shows its stuff when running multiple apps.
5) The equivalent of the Windows Control Panel is Apple Menu > System Preferences.
6) Unless you have more than 512 Meg RAM memory, don't get carried away with running "Dashboard Widgets". They can consume a fair amount of memory, and slow down your system.
7) You can use a two-button mouse with scroll wheel. The right mouse button will supply "context-sensitive" menus, which can be a real time saver.
8) The equivalent of "Properties" is "Get Info".
9) The equivalent of "Shortcut" is "Make Alias". Aliases have a little arrow in the bottom left corner of their icons. Be sure to note this, so that you can tell the difference between an alias and the original. Copying an alias will not make a copy of the original, only a copy of the alias. Deleting an alias will leave the original intact. Deleting the original, deletes your data.
10) The Mac has a very efficient virtual memory system and file system, and you usually don't need to concern yourself with either. Just make sure you leave 10% or more of your hard disk free, so that the OS has elbow room. The OS will even keep your disk defragmented automatically if you give it enough room to work.
11) If you buy external storage, firewire is much preferred to usb. Will be substantially faster. A dual-interface (Firewire+USB) will give maximum flexibility for devices that need to be used with PCs and Macs.
12) My personal opinion is that Norton Anti-virus is not a good choice for OSX. It hooks deep into the OS, and appears to be correlated with a number of mysterious problems reported here. Clam-AV would be a safer choice -- though most Mac users don't run any anti-virus, including yours truly. I would recommend that you turn on the Apple firewall and/or use a router with firewall protection.
13) Have a look at the free NeoOffice suite, if you'd like to keep some money in your pocket instead of giving it to Bill Gates: http://neooffice.org Reads and writes MS formats. Produces great PDFs, too. I exchange documents with many organizations using NeoOffice; never had a bit of problem.

Any layout suggestions for this?

How can I place a JCheckBox and JButton components on the area beside the TabbedPane tabs (Top right corner position)?
Final design should be like this image
http://www.rejimani.com/backup/tabbed.jpg
Any suggestions?
Reji Mani

* Test_AbsoluteLayout.java
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Test_AbsoluteLayout extends JFrame {
    public Test_AbsoluteLayout() {
        initComponents();
    private void initComponents() {
        checkbox = new JCheckBox();
        button = new JButton();
        tabbedpane = new JTabbedPane();
        panel1 = new JPanel();
        panel2 = new JPanel();
        getContentPane().setLayout(new AbsoluteLayout());
        setDefaultCloseOperation(WindowConstants.EXIT_ON_CLOSE);
        checkbox.setPreferredSize(new Dimension(83, 21));
        checkbox.addActionListener(new ActionListener() {
            public void actionPerformed(ActionEvent evt) {
                checkboxActionPerformed(evt);
        getContentPane().add(checkbox, new AbsoluteConstraints(350, 0, 20, -1));
        button.setText("OK");
        button.setMargin(new Insets(0, 0, 0, 0));
        button.setPreferredSize(new Dimension(71, 21));
        button.addActionListener(new ActionListener() {
            public void actionPerformed(ActionEvent evt) {
                buttonActionPerformed(evt);
        getContentPane().add(button, new AbsoluteConstraints(370, 0, 30, -1));
        tabbedpane.setPreferredSize(new Dimension(400, 300));
        tabbedpane.addTab("tab1", panel1);
        tabbedpane.addTab("tab2", panel2);
        getContentPane().add(tabbedpane, new AbsoluteConstraints(0, 0, -1, -1));
        pack();
    private void checkboxActionPerformed(ActionEvent evt) {
        System.out.println("check");
    private void buttonActionPerformed(ActionEvent evt) {
        System.out.println("ok");
    public static void main(String args[]) {
        new Test_AbsoluteLayout().setVisible(true);
    private JButton button;
    private JCheckBox checkbox;
    private JPanel panel1;
    private JPanel panel2;
    private JTabbedPane tabbedpane;
class AbsoluteConstraints implements java.io.Serializable {
    static final long serialVersionUID = 5261460716622152494L;
    public int x;
    public int y;
    public int width = -1;
    public int height = -1;
    public AbsoluteConstraints(Point pos) {
        this(pos.x, pos.y);
    public AbsoluteConstraints(int x, int y) {
        this.x = x;
        this.y = y;
    public AbsoluteConstraints(Point pos, Dimension size) {
        this.x = pos.x;
        this.y = pos.y;
        if (size != null) {
            this.width = size.width;
            this.height = size.height;
    public AbsoluteConstraints(int x, int y, int width, int height) {
        this.x = x;
        this.y = y;
        this.width = width;
        this.height = height;
    public int getX() {
        return x;
    public int getY() {
        return y;
    public int getWidth() {
        return width;
    public int getHeight() {
        return height;
    public String toString() {
        return super.toString() +" [x="+x+", y="+y+", width="+width+", height="+height+"]";
class AbsoluteLayout implements LayoutManager2, java.io.Serializable {
    static final long serialVersionUID = -1919857869177070440L;
    public void addLayoutComponent(String name, Component comp) {
        throw new IllegalArgumentException();
    public void removeLayoutComponent(Component comp) {
        constraints.remove(comp);
    public Dimension preferredLayoutSize(Container parent) {
        int maxWidth = 0;
        int maxHeight = 0;
        for (java.util.Enumeration e = constraints.keys(); e.hasMoreElements();) {
            Component comp = (Component)e.nextElement();
            AbsoluteConstraints ac = (AbsoluteConstraints)constraints.get(comp);
            Dimension size = comp.getPreferredSize();
            int width = ac.getWidth();
            if (width == -1) width = size.width;
            int height = ac.getHeight();
            if (height == -1) height = size.height;
            if (ac.x + width > maxWidth)
                maxWidth = ac.x + width;
            if (ac.y + height > maxHeight)
                maxHeight = ac.y + height;
        return new Dimension(maxWidth, maxHeight);
    public Dimension minimumLayoutSize(Container parent) {
        int maxWidth = 0;
        int maxHeight = 0;
        for (java.util.Enumeration e = constraints.keys(); e.hasMoreElements();) {
            Component comp = (Component)e.nextElement();
            AbsoluteConstraints ac = (AbsoluteConstraints)constraints.get(comp);
            Dimension size = comp.getMinimumSize();
            int width = ac.getWidth();
            if (width == -1) width = size.width;
            int height = ac.getHeight();
            if (height == -1) height = size.height;
            if (ac.x + width > maxWidth)
                maxWidth = ac.x + width;
            if (ac.y + height > maxHeight)
                maxHeight = ac.y + height;
        return new Dimension(maxWidth, maxHeight);
    public void layoutContainer(Container parent) {
        for (java.util.Enumeration e = constraints.keys(); e.hasMoreElements();) {
            Component comp = (Component)e.nextElement();
            AbsoluteConstraints ac = (AbsoluteConstraints)constraints.get(comp);
            Dimension size = comp.getPreferredSize();
            int width = ac.getWidth();
            if (width == -1) width = size.width;
            int height = ac.getHeight();
            if (height == -1) height = size.height;
            comp.setBounds(ac.x, ac.y, width, height);
    public void addLayoutComponent(Component comp, Object constr) {
        if (!(constr instanceof AbsoluteConstraints))
            throw new IllegalArgumentException();
        constraints.put(comp, constr);
    public Dimension maximumLayoutSize(Container target) {
        return new Dimension(Integer.MAX_VALUE, Integer.MAX_VALUE);
    public float getLayoutAlignmentX(Container target) {
        return 0;
    public float getLayoutAlignmentY(Container target) {
        return 0;
    public void invalidateLayout(Container target) {
    protected java.util.Hashtable constraints = new java.util.Hashtable();
}

Keyboard Layout Suggestion for Symbian^3 / Symbian...

To: Nokia
Message: The keyboard layout you've desgined for Symbian^3 / Symbian Anna looks awkward to use. The letters Q, and A should not be aligned. Have a look at the keyboard layour I've made. Please consider this layout and use it on Symbian^3 / Symbian Anna before you release the next update on Q2.
Thanks,
Neil
Attachments:
KeyboardLayoutUpdated1.jpg ‏135 KB
KeyboardLayoutUpdated2.jpg ‏134 KB

chanchan05 wrote:
I see, well, I was never really much of a portrait qwerty user. I felt the keys were too small. XD.
Yeah it seems small. But take in mind that i DID NOT reszied the keys. That's the original size.
Now which looks better?
Attachments:
Nokia X7-00.png ‏24 KB
KeyboardLayoutUpdated1.jpg ‏135 KB

Layout suggestions...how to make it better?

Hi all,
Just wondering if anyone might be willing to critique my
site. Please note that I have not yet begun styling the type, which
I will do later with CSS. Overall I am happy with my direction but
it's not quite singing yet...
http://www.bittybox.com/home.html
Feedback appreciated.
Thanks!
V

Hi all,
Just wondering if anyone might be willing to critique my
site. Please note that I have not yet begun styling the type, which
I will do later with CSS. Overall I am happy with my direction but
it's not quite singing yet...
http://www.bittybox.com/home.html
Feedback appreciated.
Thanks!
V

Can't switch input layout in Contacts and other ap...

When Contacts is oepend, it's impossible to switch input language with Ctrl-Space.
You have to enter 1 letter and then it is possible to switch layout.
Any ideas how to fix this?

Are you talking about creating titles?

Switching keyboard layout

Hi everybody i'm a newbie and I need to type in English and Persian. I've just installed arch. I want to switch layouts by pressing Alt+Shift. I have no xorg.conf, my X server was configured by hal. Thanks for your help.
Last edited by mahdif62 (2009-04-17 11:51:32)

After reading the wiki , you should end up with this :
$ cat /etc/hal/fdi/policy/10-keymap.fdi
<?xml version="1.0" encoding="ISO-8859-1"?> 
<deviceinfo version="0.2">
<device>
<match key="info.capabilities" contains="input.keymap">
<append key="info.callouts.add" type="strlist">hal-setup-keymap</append>
</match>
<match key="info.capabilities" contains="input.keys">
<merge key="input.xkb.rules" type="string">base</merge>

<merge key="input.xkb.model" type="string">keyboard</merge>
<match key="/org/freedesktop/Hal/devices/computer:system.kernel.name"
string="Linux">
<merge key="input.xkb.model" type="string">evdev</merge>
</match>
<merge key="input.xkb.layout" type="string">us,pe</merge>
<merge key="input.xkb.options" type="string">grp:alt_shift_toggle</merge>
</match>
</device>
</deviceinfo>
Change 'pe' with what's actually used for persian .

Xorg layout still doesn't work (almost)[SOLVED]

Hi,
After struggling to enable keyboard layout after the latest upgrage, I managed to do
the following:
I enabled Hotplugging, and configured it to work.
In the KDM login screen (prior to login), everything works fine: I got both layouts I want, and can toggle between them.
But after KDE starts, I loose my ability to swith layouts using my configured toggle switch (its back to the
old toggle switch - a different one, which simply changes the flag when I try to switch layouts, but the keyboard is not switched).
I'd appreciate any suggestions.
thanks
fiod
Last edited by fiod (2009-02-17 06:22:26)

There is a bug actually in switching layouts:
http://bugs.archlinux.org/task/13188

I really want more options for page layouts.

I am enjoying iphoto11, but sometimes wish for more page layout options. Is it possible to flip an entire page layout - like the option to flip a photo? I am currently working with a Photo Essay theme and in most of the layouts the text box is on the same side of the page. When I preview the book I see that I have many parallel layouts which looks a little stiff. Any ideas?

1 - there is no option to add layouts or modify existing layouts - suggest to Apple - iPhoto menu ==> provide iPhoto feedback
2 - I understand that Aperture offers this capability
3 - you can do pages in any program you want and do a print to PDF using the send PDF to iPhoto option and then use that image as a full page photo in a book - see Old Toad's tutorial #19 for more info
LN

[Solved]Ctrl+V not working in libreoffice on gnome(non-latin layout)

When using gnome-shell&libreoffice or calligra, universal keyboard shortcuts such as ctrl+v or ctrl+z don't do anything while on a non-latin layout(hebrew in my case).
If I want to paste something with ctrl+v I have to change layout to English and only then will it work.
Under MATE the shortcuts work fine regardless of the layout in both applications(and all others i have tried).
Under GNOME Shell all other applications I tried accept the shortcuts regardless of the layout(Firefox, gedit, Empathy, Nautilus)
Anyone has an idea as to what might cause this behavior when using GNOME?
Thanks.
EDIT: Solved for libreoffice by removing the package "libreoffice-gnome". UI is not as pretty now but at least the keyboard shortcuts work.
Last edited by shimi (2013-08-09 09:00:50)

After months of switching layouts and banging my head against this bug, I thought I should check LibreOffice settings (I'm using 4.1.5.3 now). What figures? I did find something. And in just a few clicks.
This is not a bug! It's simply a matter of configuration.
For the regular keyboard shortcuts (like Ctrl+C, Ctrl+V, etc.) to remain operational in LibreOffice applications while using a non-latin keyboard layout (like Greek or Russian), go to Tools -> Options -> Language Settings -> Languages, check the Ignore system input language option, save, and Bob's your uncle.
Hope this helps.
Cheers!
PS
Technically, though, shortcuts still remain language-dependent. This means if you enable this option, you will have to set your document languages manually.

Gnome3 keyboard layout icon disappeared [SOLVED]

Hello guys.
I'm using Gnome3 and have no idea how to edit applets in the panel of gnome-shell.
The problem is that I don't have keyboard layout icon in panel(With or without useFlags option set in gconf-editor). How can i fix it?
And BTW does anyone have problem with switching layout with caps lock key? It just doesn't switch layout.
Sorry for my English.
Thanks in advance.
Last edited by thoice (2011-05-25 19:57:43)

Wey wrote:
Did you check the session logs? Did you verify that the applet in fact isn't present (and not just lacks an icon)?
edit: for the capslock-issue, go to the region panel in gnome-control-center, switch to the layout-tab and click options. There should be a list with the appropriate preferences. It defaults to shift+capslock by the way, which works fine here.
If session logs is in .xsession-errors, then I have this file ending with
[1305307574,000,xklavier.c:xkl_engine_start_listen/] The backend does not re
quire manual layout management - but it is provided by the application
[1305307574,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] Page fo
r group 0 is not ready
[1305307574,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] Page fo
r group 0 is not ready
[1305310904,000,gkbd-status.c:gkbd_status_set_current_page_for_group/] JS ERROR: !!! Exception in callback for signal: message-icon-added
JS ERROR: !!! message = 'source is null'
JS ERROR: !!! lineNumber = '417'
JS ERROR: !!! fileName = '/usr/share/gnome-shell/js/ui/notificationDaemon.js'
JS ERROR: !!! stack = '([object Object],[object _private_Shell_TrayIcon])@/usr/share/gnome-shell/js/ui/notificationDaemon.js:417
([object Object],[object _private_Shell_TrayIcon])@/usr/share/gjs-1.0/lang.js:110
_emit("message-icon-added",[object _private_Shell_TrayIcon])@/usr/share/gjs-1.0/signals.js:124
([object _private_Shell_TrayManager],[object _private_Shell_TrayIcon])@/usr/share/gnome-shell/js/ui/statusIconDispatcher.js:53
([object _private_Shell_TrayManager],[object _private_Shell_TrayIcon])@/usr/share/gjs-1.0/lang.js:110
PS Caps issue is fixed now. Thanks. Caps Lock itself was disabled in Caps Lock key behaviour branch in Options in keyboard layout panel.
Last edited by thoice (2011-05-13 18:33:42)

Devanagari in urxvt and keyboard layout...

I just started taking Hindi this semester, and I was wondering how to get urxvt to work with the Devanagari script. I know the man page specifically mentions that it doesn't support all the complex combining rules, but it should still work a little bit, right? I can't get anything to display except squares.
Also, what is the keyboard layout or variant for this script? Does anyone know how I could switch layouts on-the-fly with a keyboard shortcut or something (for instance, xbindkeys)?
Thanks in advance. Hopefully somebody can help; I realize this is a little bit esoteric.
! ~/.Xdefaults - settings for terminals and X programs
Xcursor.theme: Vanilla-DMZ
! Color Codes
*background: #000000
*foreground: #ffffff
! Black
*color0: #2e3436
*color8: #555753
! Red
*color1: #cc0000
*color9: #ef2929
! Green
*color2: #4e9a06
*color10: #8ae234
! Yellow
*color3: #c4a000
*color11: #fce94f
! Blue
*color4: #3465a4
*color12: #729fcf
! Purple
*color5: #75507b
*color13: #ad7fa8
! Cyan
*color6: #06989a
*color14: #34e2e2
! White
*color7: #d3d7cf
*color15: #eeeeec
! rxvt-unicode settings
URxvt*font: xft:DejaVu Sans Mono:pixelsize=14
URxvt*iconName: Terminal
URxvt*perl-ext: matcher
URxvt*saveLines: 10000
URxvt*scrollBar: false
URxvt*scrollTtyKeypress:true
URxvt*scrollTtyOutput: false
URxvt*termName: rxvt
URxvt*title: Terminal
URxvt*urlLauncher: firefox
! Optional transparency settings
urxvtTrans*depth: 32
urxvtTrans*background: rgba:0000/0000/0000/dddd
urxvtTrans*tintColor: grey
! XTerm settings
XTerm*dynamicColors: true
XTerm*faceName: Monospace:pixelsize=14
XTerm*iconName: Terminal
XTerm*saveLines: 10000
XTerm*scrollKey: true
XTerm*scrollTtyOutput: false

http://m10lmac.blogspot.com/2007/11/os-x-105-leopard-fix-for-missing-input.html

Switch layout suggestion

Similar Messages

Maybe you are looking for