Switch Models & IOS Versions

Hi
I have been reading through the MARS manual and noticed that to manage switches they need to have a minimum IOS of 12.2. I have 14 2950's and 2 2940's which according to the cisco software advisor cannot upgrade to 12.2.
Can i add these devices to MARS and what will be reported to MARS?

You can add these devices to MARS but you would have to add them as custom devices since they are running an IOS not supported by MARS. In order to see events for the raw data you would have to develop customer parser.

Similar Messages

  • Best IOS version for 3750 switch

    I have just received 2 3750 switches, but both have a different IOS version.
    One has -> IOS version 12.1(19)EA1d
    and the other has -> IOS version 12.2(25)SEB2.
    I just want to use the switches as Gb collectors for a serverfarm seperatly (so no stack configuration) with a redundant uplink to my distribution layer.
    Can someone advise my which IOS is the best for my network?
    Thanx, Marty

    Switch 1:
    Cisco Internetwork Operating System Software
    IOS (tm) C3750 Software (C3750-I5-M), Version 12.1(19)EA1d, RELEASE SOFTWARE (fc1)
    Copyright (c) 1986-2004 by cisco Systems, Inc.
    Compiled Mon 05-Apr-04 22:06 by antonino
    Image text-base: 0x00003000, data-base: 0x009206D8
    ROM: Bootstrap program is C3750 boot loader
    BOOTLDR: C3750 Boot Loader (C3750-HBOOT-M) Version 12.1(14r)EA1a, RELEASE SOFTWARE (fc1)
    2224-3750-037000137 uptime is 23 hours, 52 minutes
    System returned to ROM by power-on
    System restarted at 09:02:42 GMT Thu Aug 11 2005
    System image file is "flash:c3750-i5-mz.121-19.EA1d/c3750-i5-mz.121-19.EA1d.bin"
    cisco WS-C3750G-24TS (PowerPC405) processor (revision H0) with 118776K/12288K bytes of memory.
    Processor board ID CAT0904X00B
    Last reset from power-on
    Bridging software.
    1 Virtual Ethernet/IEEE 802.3 interface(s)
    28 Gigabit Ethernet/IEEE 802.3 interface(s)
    The password-recovery mechanism is enabled.
    512K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address : 00:13:1A:65:50:00
    Motherboard assembly number : 73-7058-12
    Power supply part number : 341-0045-01
    Motherboard serial number : CAT090400A0
    Power supply serial number : LIT09020266
    Model revision number : H0
    Motherboard revision number : A0
    Model number : WS-C3750G-24TS-E
    System serial number : CAT0904X00B
    Hardware Board Revision Number : 0x09
    Switch Ports Model SW Version SW Image
    * 1 28 WS-C3750G-24TS 12.1(19)EA1d C3750-I5-M
    Configuration register is 0xF
    Switch 2:
    Cisco IOS Software, C3750 Software (C3750-IPSERVICES-M), Version 12.2(25)SEB2, RELEASE SOFTWARE (fc1)
    Copyright (c) 1986-2005 by Cisco Systems, Inc.
    Compiled Wed 08-Jun-05 01:19 by yenanh
    ROM: Bootstrap program is C3750 boot loader
    BOOTLDR: C3750 Boot Loader (C3750-HBOOT-M) Version 12.1(14r)EA1a, RELEASE SOFTWARE (fc1)
    2224-3750-037000138 uptime is 59 minutes
    System returned to ROM by power-on
    System image file is "flash:c3750-ipservices-mz.122-25.SEB2/c3750-ipservices-mz.122-25.SEB2.bin"
    cisco WS-C3750G-24TS (PowerPC405) processor (revision L0) with 118784K/12280K bytes of memory.
    Processor board ID CAT0925Z0WZ
    Last reset from power-on
    1 Virtual Ethernet interface
    28 Gigabit Ethernet interfaces
    The password-recovery mechanism is enabled.
    512K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address : 00:14:A8:71:CA:00
    Motherboard assembly number : 73-7058-13
    Power supply part number : 341-0045-01
    Motherboard serial number : CAT09251J90
    Power supply serial number : PHI09220165
    Model revision number : L0
    Motherboard revision number : A0
    Model number : WS-C3750G-24TS-E
    System serial number : CAT0925Z0WZ
    Hardware Board Revision Number : 0x09
    Switch Ports Model SW Version SW Image
    * 1 28 WS-C3750G-24TS 12.2(25)SEB2 C3750-IPSERVICES-M
    Configuration register is 0xF

  • Does model WS-X2914-XL-V support IOS version c2900XL-c3h2s-mz-120.5-XU.bin?

    Hi,
    really appreciate if anyone could advise on the following.
    Purpose: to implement bpdu guard on switch model WS-X2914-XL-V. current IOS version c2900XL-c3h2s-mz-120.5-XU.bin does not support bpdu guard feature.
    Action: Download from cisco website c2900xl-c3h2s-mz.120-5.WC14.bin but installation failed. (details in attached file, show version)
    Question:
    1) wonder if my switch can be upgraded to IOS c2900xl-c3h2s-mz.120-5.WC14?
    2) If yes, what causes the error in IOS upgrade?
    Thanks!!!
    Christina

    Hi Christina,
    Yes your switch definetely supports this image and your switch model number is WS-C2924M-XL-A as I can see from the attachment but in your notes you have updated WS-X2914-XL-V which I think is wrong.
    As per the attachment which you have send your switch is WS-C2924M-XL-A and it supports 12.0(5)WC14 but the problem is your switch does not have enough space available in your flash to load the new IOS.
    If you check the output of "sh flash" you will see 3612672 bytes total (840192 bytes free) which means not even 1 MB space is free and you new file will definetely be more than 1 MB so delete the old file first and then try installing the new one.
    Your switch for sure supports this new file, to confirm my statement please check this link
    http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/2935wc14/ol256210.htm#wp84866
    HTH, if yes please rate the post.
    Ankur

  • 802.1X Switch IOS version

                       Hi,
    I' have realy big layer two access network made of etherogenius Cisco switch with different IOS version and train.
    My customer bought ISE (ADVANCED AND BASE LICENSE).
    As far I read on DS it is seem that if you have Minimum IOS release 12.2(52) SE you are able to perform COA, reading  DS with more attention I notice that cisco raccomend IOS versione 12.2(55)SE3 why ? does it means COA does not work with 12.2(52)SE ?
    But more important :
    I need a minimum IOS release to perform 802.1x on my  wired network ?

    Carlo,
    Here is the guide that states 12.2(52)SE but the foot note states that for 802.1x authentication you need 12.2(55)SE.
    http://www.cisco.com/en/US/docs/security/ise/1.1/compatibility/ise_sdt.html#wp55038
    After checking the release notes this solution falls under the Cisco Trustsec which is supported on 12.2(55)SE, there are several features released in 12.2(55)SE such has vlan assignment in multi-auth mode that makes it much easier for Cisco help generate initial configs for their customers.
    Here are the release notes:
    http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_55_se/release/notes/OL23054.html#wp1047679
    Thanks,
    Tarik admani

  • Is it same IOS version for Switch & Router?

    Hi,
    Is it same IOS version for Switch & Router?
    Regards,
    Samuel

    Sam,
    The Latest Version depends upon the Switching platform.
    For example:
    On 2900XL Platform - 12.0(5)WC15
    On 2950 - 12.1(22)EA8
    On 3500XL Platform - 12.0(5)WC15
    On 3550 - 12.2(25)SEE2
    It would be better if you specify the switch platform that you have questions about, so we could point you in the right direction.
    I hope it helps.
    Regards,
    Arul

  • Model no, ios version and configuration

    Hi frienz.
    i juz received used apple laptop. i wan to knw Model no, ios version and configuration kind of things. can anyone help me ?  share me if any interested things too. thank you frienz
    Regards
    Karthick abu
    India

    Try to force it into recovery mode to restore it, as explained here: http://support.apple.com/kb/ht1808.

  • How to upgrade my itouch to the newest iOS version. Model MB531LL version 4.2.1, How to upgrade my itouch to the newest iOS version. Model MB531LL version 4.2.1

    How to upgrade my itouch to the newest iOS version. Model MB531LL version 4.2.1,

    Identifying iPod models
    Check which ipod model you have.
    The 2nd gen can only go to 4.2.1

  • 802.1X with Guest vlan support IOS version ???

    I don't know, Whitch IOS version support 802.1X with Guest vlan to Catalyst 2950 and 3550 switch
    please reply to my question.

    Tkank for your help.
    Also, Cisco web is explained , except for Catalyst 2950 Standard Image (SI) in IOS 12.1(22)EA3
    but I can't understand, My site is using catalyst 2950 SI to 802.1X and guest vlan in IOS image 12.1(22)EA3
    ex) TW_14F_A_C2950_32.8#sh ver
    Cisco Internetwork Operating System Software
    IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(22)EA3, RELEASE SOFTWARE (fc1)
    Running Standard Image
    24 FastEthernet/IEEE 802.3 interface(s)
    Model number: WS-C2950-24
    please, reply for my question

  • In IOS 6 my date format was YYYY-MM-DD. When I switched to IOS 7, it changed to MM-DD-YYYY. How do you change it?

    In IOS 6 my date format was YYYY-MM-DD, which is ISO 8601 standard used in Canada.  When I switched to IOS 7, it changed to MM-DD-YYYY format which is very confusing as all my cameras etc use YYYY-MM-DD.  How do you change it, like one can in OSX?

    It appears previous versions of IOS would pick up your preferred date format from your OSX Mac. You can modify that to whatever you like.
    Now if you select Canadian or American in IOS 7 you get only MM-DD-YYYY.  This is wrong for Canada as the preferred date format here is YYYY-MM-DD, just check your birth or expiry dates on your Ontario Drivers License or OHIP Health Card.  Or the date field at the bottom left of any Government of Canada website.
    The trouble with using other Country codes is you tend to get their currency codes like € or £ and the terms like yesterday and today in their language.

  • I have an ipod touch 32gb. Model: MC008BT Version: 5.1.1. 3rd ed.   Recently when clicking play on any song the ipod will shuffle through as many songs as there are in the album or playlist until it reaches the end without playing any songs. It also does

    I have an ipod touch 32gb. Model: MC008BT Version: 5.1.1. 3rd ed.
    Recently when clicking play on any song the ipod will shuffle through as many songs as there are in the album or playlist until it reaches the end without playing any songs. It also does not go through each song. For example:
    a 62 song playlist. I start on song 16. Immediatly the song will shuffle: 16-26-54-62 and then back to the main screen. Also when the songs are shuffling the play button in the top right corner is on.
    Music will play if i start from track one with shuffle turned off and repeat turned on. But then i am limited each time to 1-5 songs.
    Ipod has been in excellent working order since this has happened.
    any suggestions on how to fix?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             

  • Ipod model mc544ll. version 4.3.3. Will no longer connect to face time or upload pictures

    My iPod model #mc544ll version 4.3.3 will no longer connect to face time. Also I cannot send pictures to my email. I am connected to the internet.

    terryconnors, Welcome to the Apple Supprt Communities!
    To continue using FaceTime, you must update to iOS 6.1.6 since device certificate is expired.
    (especially uploading photos for email)
    And you can't use older version at all times.
    (For me, I use newer version at all times)

  • When I switch from ios 6 to ios 7 my iphone 4s asking to I tunes to update an taking 10 hours and than give me error 3194 what can I do?

    When I switch from ios 6 to ios 7 my iphone 4s asking to I tunes to update an taking 10 hours and than give me error 3194 what can I do?

    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • HT2188 How can I update to the latest ios version on my ipod touch?

    How can I update to the latest ios version on my ipod touch?

    Check to see what model of iPod you have:
    http://support.apple.com/kb/HT1353
    If you have a second-generation iPod, the last version of iOS it can run is iOS 4.2.1. If you have a 3rd or 4th generation iPod touch, see:
    http://support.apple.com/kb/HT4972
    Regards.

  • What is the  Highest iOS Version a 2nd Generation Ipod can attain to?

    I What is the  Highest iOS Version a 2nd Generation Ipod can attain to?

    It's version 4.2.1. There actually was an iOS 4.3.1, but it won't run on that model.
    (66226)

  • HT4623 What is the most current iOS version for iPhone 3G?

    I have an iPhone 3G, what is the most current iOS version? I have 4.2.1 and when I tried to update, iTunes says that I have the current version. I can't seem to download any apps with 4.2.1.

    That is correct,
    The last release of iOS to support the 3G model was 4.2.1, released on November 22, 2010
    The 3G model is now 4 and half years old.

Maybe you are looking for