Switch NTSC DVD slideshow to PAL

Good morning,
my wife and I recently received a DVD Slideshow made on a PC in the NTSC format from our Wedding photographers.
My family lives in Europe and cannot watch NTSC format. Is there a way to make a copy of my slideshow but in the PAL format?
Thank you very very much.
P

Hi
Usually - NTSC-DVDs plays well in PAL players - but not the other way around.
So here is my notes on PAL to NTSC. Just think the other way around.
PAL to NTSC or NTSC to PAL
A. Copying commercial DVDs - No Not possibly at all - Not even legal to discuss.
B. Home made DVDs (DVDs without copy protection)
C. Movies from iMovie or FinalCut
• Save as full quality QuickTime .mov and convert this with JES_Deinterlacer (free on internet)
NTSC ---> PAL.
• Most often not necessary - Most stand alone PAL DVD-players playback NTSC
(if TV is old in BL/W)
PAL ---> NTSC.
• If played on Mac - not necessary AT ALL
• If on NTSC DVD-player - CONVERSION IS NEEDED - nearly no Stand alone NTSC-DVD-players
playback PAL at all.
To do this You need to convert the PAL DVD to streaming.DV or full quality QuickTime .mov
• I use Roxio Toast™ to do this (There are no free converter)
• JES_Deinterlacer (free on internet) to convert to NTSC
• Set up an NTSC project (29.97fps or 30) in iDVD and import then burn
I burn to
• Verbatim DVD-R
• Set down burn speed in iDVD to x1 or x4 recommended by many
• Secure a minimum of 25Gb free space on internal boot hard disk before burning (IMPORTANT)
PAL is 25 fps and an analog TV standard of 625 lines
NTSC is 29.97 fps and 520 lines
NTSC (29.97fps) 520 lines - about 640x480 pixels (square) 720x480 rectangular (narrow) pixels
PAL (25 fps) 625 lines - about 768x576 pixels (square) 720x576 rectangular (narrow) pixels
to use a photo 702x480 resp 576 then add 9 pixels on each side to add together as 720
If iDVD hangs on PAL or NTSC.
Bengt W wrote
Deleting iDVD pref. file - should return You into NTSC mode.
Yes iDVD can switch to PAL - BUT as You see with a rather lousy result.
a. Need to convert to PAL - most often not - Most PAL-player can playback NTSC
and on a fairly new TV in color. (old TV in Bl/W)
(Other way around - from PAL to NTSC most often a must - few NTSC-player can use PAL)
b. IF MUST - then use JES_Deinterlacer to do this conversion - so much better and free.
My list on this (or rather PAL --> NTSC - just think the other way around)
Allosaurus writes
Thank you SDMacuser. I dumped all the plist icons with no result, and was getting pretty plist off when it occurred to me to delete all the previous dvd.proj files. Bingo. That did the trick. So thank you for all your help and the additional information you provided.
Yours Bengt W

Similar Messages

NTSC DVD doc for PAL Europe. Updated Advice on IF I need to convert & HOW?

I have read with interests several posts on playing NTSC, all region DVDs on PAL DVD players. I hope someone may have some updated advice for my situation. In brief, I would like to give out DVD copies to festival goers in France where my Doc will play in April. I thought to produce DVD-Rs on my Mac.
With a film acquired documentary(24fps), transferred to NTSC video (29.97 fps) sitting as both Avid and Final Cut Pro Media on my trusty G-4, I am now ready to export a Quicktime Movie and then encode to MPEG-2, and "author" a DVD in DVD Studio Pro.
Will an NTSC DVD now play on most DVD players and Televisions in Europe? (A contact stated their "players are bi-standard NTSC and PAL", but I'm still uncertain this means my DVD-R or replicated NTSC will play).
Should I make a PAL DVD?
IF I try a PAL DVD is it really as simple as exporting a Same as Source Quick Time Movie from Avid or FCP then using the QT MPEG-2 exporter and selecting "PAL" from within Quick Time? Then I just create a new Pal project in DVD Studio Pro?...... Even if it is that simple to create PAL from QT and my media, I don't see how my 24 fps/29.97 fps doc now magically becomes PAL 25 fps / 59.97 fps just because I converted it to MPEG-2.
Do you all recommend I try to make my own PAL DVD or should I just take my already authored NTSC DVDs and cross my fingers.
I really appreciate any newer thoughts on this topic. I'm an old pre-digital film guy so be kind.
Thanks, Rob
G-4 Quicksilver Mac OS X (10.3.9)

Yes, although the vast majority of newer European DVD players and TVs have no problems with NTSC DVDs, the only way to be sure (well, almost sure) is to burn a PAL DVD. You can't legislate for the fact, however, that not all DVD players can play all DVD-R authored disks, but that's a seperate problem!
I generally use After Effects for quick and dirty (but good quality) standards conversion. Whatever you do don't just try exporting your project via Quicktime using a PAL as this will only change the colour space and not the frame rate or frame size. If you use QT to change frame rate it will simply repeat every fifth frame to get to 30fps which will give you jerky motion.
Here's a step by step guide to doing the conversion in Compressor 2, using "optical flow" to interpolate to get the extra frames :
http://www.macworld.com/2006/02/secrets/marchcreate/index.php?pf=1

Producing NTSC dvd's from PAL projects

Hi
I'm in Australia (PAL) but would like to produce dvd's that can be viewed in the USA.
If I produce a NTSC version of my PAL filmed project in idvd, will it work in NTSC dvd players in the USA?

when you set iDVD to NTSC/29.97 and import a PAL iMovie, iDVD will convert your material and creates a NTSC videoDVD ...
... my experience, going vice versa, NTSC >>PAL, told me, that the underlying QTengine doesn't show a good result.. so, the long way for a probably better result is:
export your iM as 'QT/Full Quality' ..
download and use for free JES Deinterlacer
open your iMexport, choose 'Project, conversion' and let JESDI do the conversion..
drop THAT new file into a NTSC iDVD project..

Cannot burn NTSC DVD after burning PAL DVD

Using Adobe Premiere Elements vers.10, I created a video which I need to burn onto DVDs, in PAL format for European users and NTSC for North American recipients. I successfully burned (to folder) in NTSC, and then in PAL. Produced two sample DVDs from those two folders and reviewed them. This highlighted the need for a few corrections to the project. I carried these out, burned the revised film to folder in PAL format, and then wanted to do the same in NTSC format. The computer appears to work on the task, but produces no folder and no files. I am no longer able to procude a DVD in NTSC format, either by burning to a folder or burning directly on a DVD. What is the cause of this problem ?
Thanks in advance for any help you can provide with this issue.
Paul

Paul,
I do not recall any issues, where the program gets hung up, though as a precaution, maybe clear the Media Cache in the Scratch Disks. I know that Encore (sort of the authoring "big-brother" to the authoring function in PrE) can get confused, when it has some older Media Cache files. It assumes that things have already been done, when it needs to "start over."
Also, I would create a new, empty folder, with a unique name, and direct the Burn to Disc to THAT folder. Since all that one gets is the VIDEO_TS, AUDIO_TS (empty), and then another folder, whose name I cannot recall (Encore does not write anything but the VIDEO_TS folder and IFO, BUP and VOB files), it's easy to confuse the output. Just thinking here.
Good luck,
Hunt

NTSC DVD Transfer to PAL

I finished the Wedding in NTSC DVD. The client wants a copy in Pal to send to Russia. What is the best way to do?
Transfer NTSC DVD to DVD PAL direct, easiest way. Is there any other way?
Thanks a lot.

You must have set the wrong preset. Look in the "advanced format conversions"... Make your movie a PAL version Then perform the MPEG compression in iDVD. The the resulting file should work fine in iDVD. The resulting QT movie will be 720X576. After you do this THEN import the file into iDVD for the mpeg compression. The size of your file you just made leads me to believe that you created an MPEG PAL version... this isn't going to look as good I'll bet, and it probably won't import into iDVD which expects something other than an MPEG file.
You are starting with your sequence master from FCP right?
Jerry

NTSC DVD into a PAL version?

So, I know I have to make all assets PAL - how? Do I simply turn all FCP 6 timelines into PAL, then export QT's self-contained into Compressor, keeping them PAL, then into DVD SP 4? Or what do you recommend is the best workflow?
Thanks greatly
K

I think I had synch issues when sending it straight out to NTSC.mov to PAL m2v a couple of times. (Been awhile since I ran through some combinations and from time to time I do switch things around to see what seems to work better.) And I have also seen different workflows which people prefer to use, there were a couple of links to various processes that people use, including Nattress's Standards plug-in (a good one BTW)
I will usually start off with setting the frame controls to "Better" for Resizing and Rate Conversion and it usually does a real good job and often Best did not add to quality and just increased the time. (There were some articles where people thought Best did worse for Better on some things.)
Studio X also sums it up well here:
http://discussions.apple.com/thread.jspa?threadID=1330157&tstart=105
I know there were a couple of other good links, but do not have all the links handy right now about some workflows, sorry. But a search shows how much is out there.
http://www.google.com/search?q=usecompressor+to+convert+ntscpal&start=0&ie=utf-8&oe=utf-8&client=firefox-a&rls=org.mozilla:en-US:official
I am pretty happy with my current workflow and the results. Of course 6 months from now I could havee changed my mind to something else

NTSC DVD production from PAL media

I have had issues producing DVD for the U.S in the past.
In New Zealand we can play both PAL and NTSC on probably 99% of the DVD players in the country. Same in Australia I believe.
Seems that the U.S has mostly NTSC only DVD players and it is difficult to find a PAL or dual standard player. (Is that correct?)
Is there a better (simpler, faster, less steps) way for me to produce DVDs for the U.S (NTSC) than the way I am doing it.
Edit in PAL project and out put movie.
Import PAL Movie into a NTSC Project. Small scale adjustment usually required
Export Movie (NTSC)
Encode NTSC Movie to MPEG (I use Main Concept ENcoder - standalone version)
Open mpeg in NTSC Encore Project and burn disks
Note: I encode to mpeg outside Encore because Encore never seems to like encoding the avi (PAL or NTSC) in the NTSC Encore Project. It is fine with the mpegs

>it is difficult to find a PAL or dual standard player. (Is that correct?)
It is.
>Is there a better way for me to produce DVDs for the U.S
Maybe try DVFilm Atlantis.

NTSC DVD created with iMovie 6.0.3. Need to convert to PAL.

Is there a way to do this without starting over? Can I switch iMovie from NTSC to PAL? Can I take my iMovie NTSC project and copy it to a new iMovie window after switching the preferences to PAL? Would that keep chapters in place? Can Toast or something do this? I sure hate to totally start over.

Hi
Please Karsten
b) export your iMovie project; drag the resulting file into a new PAL IDVD project; iDVD will ask you to keep or change the standard
IS NO GOOD WAY at all - It works but resulting DVD is barely viewable ! (jumpy, un-sharp and really bad)
a) is an excellent choice as long as TV is fairly modern - else result will be Bl/W
My notes on this:
PAL to NTSC or NTSC to PAL
A. Copying commercial DVDs - No Not possibly at all - Not even legal to discuss.
B. Home made DVDs (DVDs without copy protection)
C. Movies from iMovie or FinalCut
• Save as full quality QuickTime .mov and convert this with JES_Deinterlacer (free on internet)
NTSC ---> PAL.
• Most often not necessary - Most stand alone PAL DVD-players playback NTSC
(if TV is old in BL/W)
PAL ---> NTSC.
• If played on Mac - not necessary AT ALL
• If on NTSC DVD-player - CONVERSION IS NEEDED - nearly no Stand alone NTSC-DVD-players
playback PAL at all.
To do this You need to convert the PAL DVD to streaming.DV or full quality QuickTime .mov
• I use Roxio Toast™ to do this (There are no free converter)
• JES_Deinterlacer (free on internet) to convert to NTSC
• Set up an NTSC project (29.97fps or 30) in iDVD and import then burn
I burn to
• Verbatim DVD-R
• Set down burn speed in iDVD to x1 or x4 recommended by many
• Secure a minimum of 25Gb free space on internal boot hard disk before burning (IMPORTANT)
PAL is 25 fps and an analog TV standard of 625 lines
NTSC is 29.97 fps and 520 lines
NTSC (29.97fps) 520 lines - about 640x480 pixels (square) 720x480 rectangular (narrow) pixels
PAL (25 fps) 625 lines - about 768x576 pixels (square) 720x576 rectangular (narrow) pixels
to use a photo 702x480 resp 576 then add 9 pixels on each side to add together as 720
If iDVD hangs on PAL or NTSC.
Bengt W wrote
Deleting iDVD pref. file - should return You into NTSC mode.
Yes iDVD can switch to PAL - BUT as You see with a rather lousy result.
a. Need to convert to PAL - most often not - Most PAL-player can playback NTSC
and on a fairly new TV in color. (old TV in Bl/W)
(Other way around - from PAL to NTSC most often a must - few NTSC-player can use PAL)
b. IF MUST - then use JES_Deinterlacer to do this conversion - so much better and free.
My list on this (or rather PAL --> NTSC - just think the other way around)
I have to send it overseas
That too can be a problem. As USA = NTSC = 29.97fps and EU = PAL = 25fps.
DO Not let iMovie or iDVD do this conversion from one to the other - Result will be Very
BAD
I save the movie as a full quality QuickTime .mov file then I use JES_Deinterlacer to do the conversion - then I cont. in iMovie or iDVD with project set accordingly.
JES_Deinterlacer is free on Internet and there are Pro applications but not that much better and costs are astronomical.
PAL-DVDs - don't play in US
NTSC-DVDs - usually plays well in EU
All plays well on a Mac - What ever.
Allosaurus writes
Thank you SDMacuser. I dumped all the plist icons with no result, and was getting pretty plist off when it occurred to me to delete all the previous dvd.proj files. Bingo. That did the trick. So thank you for all your help and the additional information you provided.
Yours Bengt W

Will PAL dvd player play my NTSC DVD-r?

I'm trying to figure out if I need to convert several NTSC dvd's into PAL format to send to a friend's mom in Israel (she's very sick and would like to see these soon).
Since I've never converted between these formats, I've been doing lots of research and keep getting more confused. I downloaded JES Deinterlacer (i think thats what its called) but I'm not sure I need it since I read the following on an imovie FAQ website:
"I have an NTSC project and want a PAL DVD.
The good news is: You can just send an NTSC disc. Any PAL set top DVD player capable of playing DVD-R discs can also play NTSC discs. All that is needed is a fairly new TV, built in the last 8-10 years or so."
Could this be true? Can I really just send the NTSC dvd's to her? I hate to waste time here...please help...
Thanks so much in advance.
Jenny

That´s right; NTSC DVDs will always work on PAL players when the player is compliant to the DVD specs. Those players do give out the regular NTSC signal and/or convert to PAL60. Some players can even convert to PAL50. The problem is the TV set.
My German TV is 14 years old and cannot handle PAL60 or NTSC; I would need one of those rare players that convert to PAL50 (usually with poor results).
But NTSC DVDs will always work on a PC (when it is an all-region DVD).

Can iMOVIE HD convert a PAL DVD to a NTSC DVD?

That was all! Can iMOVIE HD convert a PAL DVD to a NTSC DVD? That's my only question. Thanks.

Hi
A. Commersial DVDs - No Not at all - Not even legal to discuss.
B. Home made DVDs (without copy protection)
NTSC ---> PAL.
• Most often not necessary - Most stand alone PAL-DVD players playback NTSC
(if TV is old in BL/W)
PAL ---> NTSC.
• If played on Mac - not necessary AT ALL
• If on NTSC-DVD-player - CONVERSION IS NEEDED - nearly no Stand alone NTSC-DVD-players
playback PAL at all.
To do this You need to conver the PAL DVD to streaming.DV
• I use Roxio Toast™ to do this (There are no free converter)
• MPEG Streamclip (free on internet) to convert to NTSC
• Set up an NTSC project (29.97fps or 30) in iDVD and import then burn
I burn to
• Verbatim DVD-R
• Set down burn speed in iDVD to x1 or x4 recommended by many
• Secure a minimum of 25Gb free space on internal boot hard disk before burning (IMPORTANT)
Yours Bengt W

25fps footage to put on PAL and NTSC DVDs - Inverse Telecine?

So, I've shot and edited a short item in 25P from my PAL HVX200...
I'd like to create a 'movie feature'-style NTSC DVD. One that has MPEG-2 files with inverse telecine flags to tell the NTSC decoder to repeat the fields to pull up the footage to 29.97fps.
Does that mean I need to scale my footage from 720w by 576h down to 720w by 480h, set the speed to 95.904% to 23.976fps? Can I do this in Compressor? Will Compressor take the audio and speed it up too, but keep the pitch the same?
That will get me a 24P NTSC file. How do I encode this as an MPEG for an NTSC DVD?
If I wanted to create a 'progressive' PAL MPEG for DVD (with the inverse telecine flags), are they encoded as 576 by 720 frames at 23.976fps, or at 24fps?
In the PAL world, a bit in one of the 50 non-broadcast lines is used to tell TVs and DVD players that the content is anamorphic. Is there an equivalent for NTSC? Does Compressor take care of that?
G5 2x2.5GHz Mac OS X (10.3.9)

Hey Alex
a little confused here, but from what i can gather:
you have a movie shot @ 25 fps (PAL)
you want to make a NTSC dvd and a PAL DVD, is this correct from the above source and make sure they are progressive?
well ok the PAL one is easy, just take your source video into compressor and in the frame control tab, make sure that your ouput field is progressive.
the NTSC DVD is a little tougher. do you have FCP?
the only difficulty i do see, like you said was the audio pitch/speed.
i guess you CAN do a conversion in compressor, but how well it looks.. dont know i will run some tests and let you know
Mikey

Making a PAL version of an NTSC DVD

Hello all.
I have recently finish production on a short film, made a DVD with extras for the crew, and now need to send one to Australia (PAL DVD). What is the best way to transform my NTSC DVD project to PAL. Do I need extra software to do this, or simply use the PAL settings on my NTSC video and let compressor do the work? Could I change my DVD SP project file to PAL and let DVD SP work it's magic?
Using:
DVDSP 4
Compressor 3
Thanks everyone!

Hi:
Another one:
http://discussions.apple.com/thread.jspa?threadID=976262&tstart=15
And something to take in account is that "ussually" DVD players & TVs in PAL countries can play NTSC DVDs (what doesn't happen in NTSC countries where most of the equipmnets cannot read/play PAL movies).
You could check that with your contact/customer in Australia.
Hope that helps !
Alberto

Converting NTSC DVD to Blu-ray or PAL DVD

Why doesn't Encore allow me to change a DVD project to a Blu-ray project with the ability to choose the frame size and rate, or to change an NTSC DVD to a PAL DVD? It looks like the option is there, but they are grayed out.
I exported my Premier Pro CS3 project for NTSC DVD, PAL DVD and Blu-ray, hoping to simply change to Encore CS3 project type, and then replace the assets with the appropriate file/format exported from Premier.

>Maybe worth a feature request for CS5?
God in heaven - NO!
As Joe just pointed out, these are 2 completely different TV standards, running on different frame rates at different resolutions.
The results of attempting this "on the fly" with menus etc would very closely resemble a dogs dinner.
>I would therefore guess that you are stuck with copying the menus and other such assets into a new Encore project for each output format.
That won't work.
NTSC is 720x480, PAL is 720x576. They have different PAR as well.
If compliance is what you need, then design your menus in Square Pixels at 720 x 540, and resize the image (in PS) to the required TV standard before importing into Encore. 16/9 is worse, as you need to use different designs for each TV standard. There are no short-cuts.
Asset preparation should be done
i outside
the authoring application, never
i in
it.

Converting an NTSC DVD to PAL DVD

Does anybody have any idea how you'd go about changing
an NTSC DVD into a PAL DVD? It's not copyrighted, and
the conversion doesn't have to happen in DVDSP.
It can be done with Toast or other software.
I'd be interested in what you think is the easiest way?
Thanks.

Hi Brvideo
I had a similar query a couple of weeks ago.
The link is here..
http://discussions.info.apple.com/webx128@@.68ba3040
(Oct 02 2005). The advice from Houghts in this thread was bang on - it worked brilliantly.
Additionally as mentioned in the original query - the shareware mpeg2works is also supposed to be able to do this. I can't say one way or the other as I haven't used it but you'll see at the mpeg2works forum on their own website that in some cases it hasn't worked so well.
The QT DV/MpegStreamClip method certainly worked well for me and the quality was surprisingly good. Good Luck with it.

Same project in CS5 to PAL DVD and NTSC DVD.

Hi everyone,
I am trying to find best solution how to do it. My project is slideshow with scaled JPEG images and some video clips from DSLR camera Canon T3i.
I know that video is 16:9 (1920x1080, 29.97fr) ratio and my output should be 4:3 ratio. With this I can deal with no problems, because is just few clips. My conclusion is: How to deal with PAL SD 4:3 ( 720x576, 25fr) ratio and NTSC SD 4:3 (720x480, 29.97fr) and a lot of images. What sequence settings I should use for the project? What I can think: start with DV PAL after everything is done put in DV NTSC sequence and scale it? Any other thoughts, please?
Thank you, Art

I was recently faced with a problem on an HD NTSC video that I videoed and produced. The customer wanted a DVD that relatives over in Germany could view. My concern was how to produce and test a PAL version. My good friend Harm advised me that any DVD player in Pal-land has the capability of playing NTSC DVD video disks! It worked fine.

Switch NTSC DVD slideshow to PAL

Similar Messages

Maybe you are looking for