Switch off Controlling Documents

Can any body tell me how to switch off Controlling Documents.
Because our requirment is when there is any invetory positing system should not created Controlling Documents.
Thanks in advance,
Murali

don't create the GL accounts that the inventory movements are posting to as costing elements. you won't get any CO documents then.

Similar Messages

Can I reinstall "Documents and data" in iOS 8 after switching off it?

I have not upgraded to iCloud Drive yet because I use an old Mac with Mavericks.
I've switched off the "Documents and data" option in Settings/iCloud, but when I've wanted to switch on it, that option has dissapeared.
I don't want to upgrade to iCloud Drive now, I just want to see my iWork data in "Documents in the cloud" in my iOS 8 iWork. "Documents in the cloud" is working in the Mac.
Thank you.

This may be caused by a corrupt existing backup that needs to be deleted, or by data on your device that is causing the backup to fail. To troubleshoot these, try deleting your last iCloud backup (if you have one) by going to Settings>iCloud>Storage>Manage Storage, tap your device under Backups, then tap Delete Backup and choose Turn Off & Delete at the prompt. Then go to Settings>iCloud>Backup and turn iCloud Backup back on and try backing up again.
If it still won't back up, you may have an app or something in your camera roll that is causing the backup to fail. To locate which one, go to Settings>iCloud>Storage>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If the backup is successful, then the camera roll and/or one of your apps is causing the backup to fail and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.

How can I play music from the icloud using apple tv (2) controled by remote app on iphone so the TV is switched off but stereo on

I was blown away when I started using the new remote app with Apple tv to play music from my iMac on my best music speakers in the living room!!! However there are still 2 things required to make things ultra simple:
1 Not to have my iMac switched on to have to stream music to the Apple tv (I've now started using iTunes Match which has almost fixed this one)
2 Not have to have my TV switched on to control my amplifier through the apple tv. (I can do this using the remote app on the iphone but only for music streaming from my iMac it wont work for music I have in iCloud, apart from music now playing. I can't search/browse any other music)
If this is fixed it will be absolutely awesome!!! As my apple tv will replace all the HIFI separates apart form my amplifier and I can control what music my amp plays using the best user interface in the world my iphone/ipad
Dylan

Hi, I don't have this bug. I can play music through my apple tv with the TV switched off and use the apple remote app to control the apple tv.
My problem involves:
icloud music ----> broadband router ----> apple tv ---->music amplifier. Using the remote app on the iphone to control whats playing. This almost works but in the remote app you can only see the currently playing song, you can't search/browse your music in the icloud (itunes match).
What does work is:
iMac-itunes music ----> apple tv ---->music amplifier controlled by the remote app in the iphone with teh tv off. I can view my itunes library with the tv off using the iphone remote app. I would like to do this but using my music in iCloud. That would be awesome!!!

Word documents have disappeared from my desk top (macbook air) and cannot be found anywhere, happened after switching off and re-bootingk

Saved word documents have dissappeared from the desk top after saving. Problem seems to occur when laptop is switched off and then re-started. they can't be found anywhere e.g tried spotlight, recent documents etc. Help. Joe

First, you might as well address the two apparently-minor issues you found:
Some info on the Epson Scanner Monitor (via searching these forums):
http://discussions.apple.com/thread.jspa?messageID=8272208&#8272208
Not sure about the MS Word message, but it looks like you might need an upgrade. I'd check with Microsoft, or perhaps VersionTracker.com.
Ok, back to the original problem. Does the message have any other text (intelligible or not)?
Does it give you any options, especially "report"? If so, take it, then look via Console for a crash log.
What IS in the system log for the sleep/wake time? There should be a System Sleep, followed by a System Wake, and perhaps another line or two. Anything in that area might be helpful.

SP2010 I need to set the include in search option switch on all document libraries to off across all site collections on the whole farm?

SP2010 I need to set the include in search option switch on all document libraries to off across all site collections on the whole farm?
Has anybody seen If this can be done programmatically any help would be gratefully welcomed thanks.

i am not sure about the script, why not create crawl rule which will exclude the allitems.aspx from showing in the search results.
Go to search service application, crawling section, click crawl rules to create a crawl rule to excludehttp://*allitems.aspx page.
also check this:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/f431dd0e-871b-4f9e-990e-8f3b7ca932a4/crawl-rule-exclusion-sharepoint-2013
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Switching off changes tracking

Hi gurus,
I need to temporarily switch off the tracking when creating sales document with BAPI_ADMGMTSO_CREATEFROMDATA.
At the present time, whenever I create a new document, it is always tracked the creation of the document (see "display changes" for the object RJHAK in JHA1N).
I need to switch off this tracking in migration phase and switch it on later.
Any Ideas?
Thanks in advance.

Hello Friend,
You can de-activate change document update my choosing following via customizing.
in SPRO SAP Media->Advertising Management->Sales->Order->Client-Specific Settings->Control Order Update.
Double click on initiator "Order Update" and select option "Inact ch doc".
Hope this info is helpful.
Regards
Suthan

How do I stop my MacBook clearing the icons off the desktop when I switch off

How do I stop my MacBook clearing the icons off the desktop when I switch off the machine?

Hi Matt
After I create say a word document, file it on my desktop and then shut down my machine. The next time I open up the MacBook the file icon has been removed from the desktop. I can still retrieve the file in a folder labeled with the month I created it. But why has the OS removed it from the desktop and how can I stop it happening?
It happens to alias icons as well!
Regards

MacBook Pro keyboard backlight not switching off

I recently bought a 13" MacBook Pro (2012, 2.9GHz i7) and it came with Mountain Lion preinstalled. The keyboard backlight isn't behaving as I had expected: when the "Adjust keyboard brightness in low light" option is checked, it does indeed adjust the brightness of the backlight when ambient light levels change. However even when the ambient light is VERY bright (desk lamp shining down) the backlight doesn't switch off; instead it just goes to full brightness. I understand that the backlight usually dims in dark conditions to save battery, but why would it go bright when the keyboard is fully visible without a backlight? Is there a way to make the keyboard backlight go off when there is plenty of background light and come on when the environment is dark?
Thanks in advance for any advice.

Auto brightness operation usually works in the way yours is working. It is dimmer in very low light and progressively gets brighter as the ambient light increases. There are cases where this is actually helpful as in wierd backlighting situations.
You can override in the System Settings and from the keyboard "function" keys. I'm not at my MBP right now, but I think the keyboard backlighting controls are somewhere near F5 and F6.

Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK

Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK with plug-in keyboard and mouse

Hi, Derek -
...the screen splits into 4 areas and open windows seperate and shrink.
Sounds like Spaces is being activated somehow. With the wired keyboard and mouse in use, select the Exposé & Spaces control pane in System Preferences, click the choice in that pane for Spaces. See what the settings are. There are some activation settings in that pane - by default, F8 activates it.
It could be that the bluetooth keyboard has some stuck keys and is activating Spaces; or that the activation command has somehow been reset to something that the bluetooth mouse, or bluetooth itself, is triggering.

How to switch off screen updates

Hey there, fellow (extend)scripters,
I have created a bunch of scripts that tackle the entire book, with many chapters, and performing lots of search-and-replace stuff. While testing, I want to see what is going on, so I have all documents open and I can see the fast scrolling etc. But to speed up the script after testing is done, I insert two lines to switch displaying off and on again. It seems that this is not enough, for FrameMaker keeps frantically switching from one document to the next for a short while, then makes the screen go blank with a discomforting "Not responding" message in the title bar.
Has anyone succesfully figured out how this whole screen displaying stuff really works in ExtendScript ?
Thanks
Jang

If you are saying that you've forgotten the passcode to unlock the iPad then you will need to connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and restore/re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode for your iTunes to be able to reset it : http://support.apple.com/kb/ht1808
If you do it via a different computer then :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

How to switch off 'Would you like to save changes?' message

Hello.
I am developing AddOn that has form of control type. This means some parameters can be specified (so editing mode must be on) but the data in database are never changed.
So standard message that SAP B1 displays ( 'Would you like to save changes?' ) when closing form is useless.
Please tell me how can I switch off this message.
Best regards,
Pawel.

Hi Pawel,
As A. Kerremans pointed out this is not possible, however if the item is not used to change the database you can set the AffectsFormMode property to false. This means that any change to the item will not change the form and B1 will not present you with message about saving the data (as it cannot detect that changes were made).
Good luck.
Best regards,
Pedro Magueija

How to switch off breadcrumb-navigation in EP 6.0 ?

Hi All,
I've got the request to switch off the s.c. breadcrumb-Navigation. Is there any possibility to remove this ?
In EP5 there was possible to let them disapear by changing the font color, this seems not to work in EP6 as some parts of the links cannot be controlled separatly.
Has anybodoy done this and could share it here ?
Thanx in advance
Stefan

Yes there is a way.
The breadcrumb is added as an iview to the innerpage, which again is added as a page in the default framework page.
To remove:
1. Go to PortalAdministration->Portal Content
2. Expand the portalcontent->Portal users->standard portal users folder and edit the default framework page
3. Select the inner page and click edit (I cant find the innerpage in the content structure)
4. Hide an iview call Page toolbar (I think)
If this is not the active default framework page, you can make it the default by going into Systemadministration->Portal display->Desktop and display rules and edit the default portal desktop from the same place as 2.

How to switch off scroll and zoom functions of touchpad on Satellite L

Hi.
Can anyone tell me how to switch off the scroll and zoom functions for the Synaptics Touchpad v7.2 .
Can't seem to do it via the Control Panel.
Any suggestions.

Hi buddy,
> Can't seem to do it via the Control Panel.
You can only disable the virtual scrolling function if the touchpad driver is installed properly. The driver provides extended functions and allows you to disable/enable special features. If you dont have installed the touchpad driver download it on official Toshiba page:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Then navigate to control panel as the previous user wrote for disabling the scroll function.
Can you find it now?

How to switch off the induction furnace with LabView efter an LCF test is finished?

Hi,
I am working with low cycle fatigue testing at Instron 8801 and are
using Instron Fast Track2 LabView LCF software for controlling tests,
read the files, calculate modulus, etc. and produce figures. For
heating of the specimens during LCF-tests I use induction furnace with
Eurotherm 2604 controller. The problem I have is how to stop or switch
off the induction furnace when the test is finished?
I would be very grateful if You have any suggestions how to solve this
problem.
Regards

That depends on how you want to turn it off. I am not familiar with the Instron Fast Track, but the Eurotherm can be controlled directly from Labview using the modbus comms. When the test is finished, you can send a reset program command(if a program is running), or send a different setpoint, etc.
If you have digital outputs available on your computer, you could wire one of them to a digital input on the 2604 to do just about anything.
If you have the OPC version of Eurotherm iTools, you can control the 2604 with Datasocket connections.
Please give a few more details, and maybe we can figure out the best way to do it.

How to switch off the error sound in Triversity

Hi
How to switch off the error sound in Triversity, The audio of the computer is already in mute state. The problem is found with DELL pc and not with HP

Mohammed,
There is, actually, a better way to get rid of that annoying beep every time you get a policy prompt, error, etc.
I have a Dell Vostro 1300 and I have done this in other Dell laptops with sucess. Perform the following:
Go to Control Panel --> System --> (on the HARDWARE tab) Click on DEVICE MANAGER
In DEVICE MANAGER, click on VIEW --> SHOW HIDDEN DEVICES
Now, go to "NON-PLUG AND PLAY DRIVERS" and you will see "BEEP" listed as an active device. Right click on it and select "DISABLE" and then reboot your laptop.
You should be golden right after the reboot.
Hope this helped,
Alfredo Carigga

Switch off Controlling Documents

Similar Messages

Maybe you are looking for