Switch off default selection in partners pop up

Hi Experts,
In case of one sold to, multiple ship to, system gives a pop up with list of ship to parties. But by default selecting the first ship to, with tick mark. Is there any possibility to switch off the system default selection in partner functions pop up.
Points assured for helpful answer.
Thanks
Sunanda.P

Hi Sunanda,
If you do not want a pop-up to come up everytime you create a sales order then you can simply delete all the ship to party's from the customer master, once you delete all the ship to party's in customer master you can manually select your desired ship to party at the sales order level only. This is the best solution without disturbing the standard configuration. Hope im clear with your query. Either of the two you can use, both the functionalities cannot be used simultaneously, if you want to use both these then you may have to design a user exit.
regards,
US

Similar Messages

How to switch off the pop-up message in rspcm

Hi there,
Does anyone know how to switch off the pop-up message in rspcm?
The monitoring user shouldn't get the pop-up below anymore:
Statusänderung des Requests Sollen Folge-Events ausgelöst werden?
The pop-up in english might be
status change of request - trigger subsequent processing? or similar
We would like to outsource the process chain monitoring (rspcm) to our operating.
But operating shouldn't deal with the pop-up above and make decisions especially when delta infopackages are involved.
Thanks for your help in advance.
Regards,
Wolfgang Smetana

Elena,
Is the subsequent process defined on success or failure ? if that is not defined - you might come across this message.....
Arun

Switching off selected devices

Hi, I wonder if anyone can help. I have a BT Home Hub 3 and I heard that you can switch off selected devices at various times of the day, i.e. switching off my son's xbox without the rest of the familiy suffering with a lack of internet. Is this facility available with the home hub 3 or would i have to upgrade to a newer system.
Thanks

Have a look here:
http://bt.custhelp.com/app/answers/detail/a_id/11364/related/1
Hope this helps
If my post has been useful, please click on the Ratings star on the left-hand side of the post.

Is it possible to switch off all addons by default when starting firefox?

Firefox often runs quite slowly but resetting appears to solve the problem. I tried to identify any problmatic addon but was unsuccessful

'''''Is it possible to switch off all addons by default when starting firefox?'''''
Not really. You can start Firefox in the [https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode?esab=a&s=Safe+Mode&r=1&as=s SafeMode], but you would need to restart Firefox to enable your addons.

Howto switch off: Jump to selection

Hi,
I'm using Flash Builder Version 4.0.0.235740 on Windows Vista.
When I doupleclick a variable in the AS3 code all other equal variable names are selected automatically. This is a nice feature. But when I use i.e. the scrolling to modify other code parts the screen always scrolls back to the previously selected variable. This causes a lot of failures as I'm not always on the screen.
Is there a possibility to switch off this auto scrolling feature?
Thanks. Kind regards,
Viktor

Is this a rare or unique problem I have described or could it be that it is related to the Eclipse plattform?

Is there a way to switch off by default the video on FaceTime? I only ever use this app for audio/calls and hate the video being on. I especially hate that if I leave the app open to receive calls it means the camera and green light are on.

My issue is that I can't find a way to have the camera switched off when the app is open and so this means if I want the app open all day to receive calls then the camera is going to be on the whole time. Even if it didn't potentially drain the battery, or add to the CPU usage or whatever else may cause any problems whatsoever (wheel of death!), I just don't want the camera on as I don't see myself ever wanting to use the video call feature but I would use the audio/call multiple times throughout the day to make and receive calls. The camera being on when the app is open is enough to prevent me from using the app. Also ever since seeing that episode of criminal minds where if you saw the green light on above the screen then it meant the killer was watching you!
Basically I just can't believe there isn't a way to disable the camera whilst having the app running. I know when initiating an audio call the camera goes away, but I would like the camera away the whole time. To me it just would make sense that if you click the video option then the camera is on, and if you click the audio option then the camera goes off. It just seems waaaaay to basic a thought for apple to have missed... Let's face it, we're not all as pretty as the people in the apple adverts and don't want to see our ugly mugs staring back as us when we work all day at our macs!

I have exactly the same concern. It seems it would be a simple fix for Apple to allow users to turn off the camera (and even the mic) while keeping FaceTime open -- especially now that it turns out FaceTime must remain open in order to send and receive iPhone calls on a Mac.
I like to think this new functionality of FaceTime will be baked into a future release of Yosemite, as the current setup has that not-quite-finished feel of a work in progress. In the meantime, there's nothing like a little piece of Post-It stuck over the camera to keep the NSA from watching your face as you type a post to the Apple Support Communities.

BlackBerry Z10: Default Battery Percentage Level for individual services to switch off

We all know BlackBerry switches off services one by one when the battery reaches critical level. But is there any fixed battery level to cut down individual services. For example, Bluetooth will be switched off at 20%, Mobile data at 15%, Wifi at 10%, etc. I am searching these in BlackBerry documentation and Googling as well. But I am not able to find such info. Any help please.
Karthik Andhamil
Founder and Developer
Andhamil
Follow Us. We are Everywhere.
Facebook, Google+ and Twitter

You have posted the same question six times in the forums. Posting it once is plenty. Please don't post multiple times.
Usually that stuff shuts off at around 5% on the Z10.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK

Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK with plug-in keyboard and mouse

Hi, Derek -
...the screen splits into 4 areas and open windows seperate and shrink.
Sounds like Spaces is being activated somehow. With the wired keyboard and mouse in use, select the Exposé & Spaces control pane in System Preferences, click the choice in that pane for Spaces. See what the settings are. There are some activation settings in that pane - by default, F8 activates it.
It could be that the bluetooth keyboard has some stuck keys and is activating Spaces; or that the activation command has somehow been reset to something that the bluetooth mouse, or bluetooth itself, is triggering.

How to switch off breadcrumb-navigation in EP 6.0 ?

Hi All,
I've got the request to switch off the s.c. breadcrumb-Navigation. Is there any possibility to remove this ?
In EP5 there was possible to let them disapear by changing the font color, this seems not to work in EP6 as some parts of the links cannot be controlled separatly.
Has anybodoy done this and could share it here ?
Thanx in advance
Stefan

Yes there is a way.
The breadcrumb is added as an iview to the innerpage, which again is added as a page in the default framework page.
To remove:
1. Go to PortalAdministration->Portal Content
2. Expand the portalcontent->Portal users->standard portal users folder and edit the default framework page
3. Select the inner page and click edit (I cant find the innerpage in the content structure)
4. Hide an iview call Page toolbar (I think)
If this is not the active default framework page, you can make it the default by going into Systemadministration->Portal display->Desktop and display rules and edit the default portal desktop from the same place as 2.

Canon iP4500 - Switch OFF Color Management in Leopard 10.5.3

Hello,
a few days ago I've got the Canon iP4500; I've downloaded the latest drivers for it (on the Canon web called 2.1, but when installed it says 10.1). I wanted to profile the printer with the EyeOnePhoto spectrometer, so I logically wanted to switch OFF the color management in the printer driver for printing the reference file..
So, after hours of frustration I must give up: I can't find any way to switch the color management off. In my previous Canon there was an "Color mode: None" option, but for the iP4500 there is only "Standard" and "Vivid", e.g. "None" is missing in the dropdown options.
I've googled hours and read the online help with no success. The online help says it should be there, in "Color Correction" section. It's not. Am I having too new driver version or am I missing something? I've tried everything possible already, set the color management to "Vendor" and "ColorSync", looked in ColorSync Tool, changed media.. Nothing.. From none application, with any possible setting combination, IT IS NOT THERE..
Any ideas?
Thank you very much,
Andrej

Unfortunately the Canon inkjet drivers are not provided with an uninstaller, so it requires a manual clean-up. Following is my uninstall/reinstall procedure for the iP series of Canon printers...
1. Open System Preferences > Print & Fax. Highlight the Canon printer in the Printer list and click the minus ( - ) button.
2. Hold Control key and click in the empty Printers list. Click on Reset Printing System.
3. Close Print & Fax
4. Go to Library > Printers > Canon and delete the contents of the BJPrinter folder.
5. Go to Library > Receipts and delete the Canon driver package files. The file name will show Canon iP4500 xxx.pkg and there will be one for the Canon CUPS version, most likely showing v10.x.
6. Go to Library > Preferences and delete the Canon folder.
7. Empty the Trash
8. Unplug the Canon USB cable and restart the Mac
9. Reinstall the version 6.9.2 of the Canon driver.
10. Once the driver installation is complete, go to Applications > Utilities and open Disk Utility. Run the Repair Disk Permissions option.
11. Reconnect the Canon USB cable. Then open Print & Fax and see if the Canon printer is listed. If it is, try a test print.
12. If the printer is not listed, click the plus ( + ) button.
13. Select the Default view and select the Canon printer connected via the USB port. The Print Using menu should automatically change to Canon IJ Printer. This should be the v6.9.2 driver.
14. Click Add to add the printer.

WLC 2504 can't change WAP name or switch off CDP via WLC gui

Hi All,
Please can you assist? I have 1 x Cisco WLC 2504 & 2 x Cisco WAP AIR-CAP1602I-E-K9 running 7.4.100.60.
All three devices are installed and working correcty within a corporate environment. However, there are a few tweaks that I would like to do, to tidy up the configuration and switch certain elements on or off. For example, my core networking hardware is Huawei and I would like to switch off 'CDP' on the WAP's as the associated error messages are filling up my logging buffer on my switch. So, I https to my WLC, locate the WAP in question, goto 'interfaces' and untick the box for 'CDP state' hit apply, then I get the following error message "controller name is mandatory when controller ip address is configured" and then the tick reappears!
At present I have two WAP's. Both have static IP addresses and both are reachable on the network. The one WAP did allow me to change the name to something meaningful, but the other WAP would not let me and still has the default MAC address as its name. I have the same issue, when I try to change the name on the WAP it says "controller name is mandatory when controller ip address is configured"
I have also tried to CLI directly in to the WAP to make these alterations, but as soon as i launch 'putty' it quits out. I guess this is locked down once the WAP's associate with the WLC.
And around I go.... Someone must have been in this situation, what am i missing? Thanks in advance!

Hi Andy,
By default SSH & Telnet is disabled for WLC controlled APs. So you have to enable it first via WLC GUI in order to access the AP via telnet or SSH.
Wireless -> Select your AP -> Advanced -> Tick Telnet/SSH boxes.
If you could not change AP name via WLC GUI (it may be a bug), but as I said earlier try to change it via WLC CLI (not AP CLI itself). SSH to your WLC & then try the following.Old AP name is the one with its mac address.
(WLC) >config ap name
(WLC) >save config
Are you sure you want to save? (y/n) y
Configuration Saved
HTH
Rasika
*** Pls rate all useful responses ****

6310 with CARK-91; Auto Switch Off Possible?

Hey All
My dad has a BMW with the CARK-91 kit, and used to use a Nokia 6210. When he would turn the car on and off, the phone would follow by switching its power automatically; when switching the ignition off, it would come up with "Phone will power off if not used".
Unfortunately the 6210 broke so he now has a 6310. All works fine, except that it wont switch off; it seems strange that this feature isn't available as the phone will just sit there with its lights on ad infinitum.
Does anyone know if this is available? A guy at Vodafone said it is available with a software upgrade but it seems silly since the older 6210 had it.
Thanks in advance!

Very odd. 6310 has long been a defunct phone so I cant easily examine its menu (nor can I remember anything usefull)
You might try selecting default factory settings or exploring the menu/manual. More recent phones ( eg 6230) have a menu option to ignore the ignition key. I dont remember that with 6310 but I dont remember a heap of stuff these days.
Upgrading software version should cost you nothing at a service centre (most cities/bigger towns) If you don't have one close then phone one and they will be able to advise you how to check your phones version and if there are any usefull updates available.

BB Device Wont Stop Switching Off & On

Hi! HELP!!!
My BB suddenly started switching off and on. When I remove the battery nothing happens it just goes back to the same thing. I loads up thye security verification and then switches off. When I call the phone nothing comes up. Earlier this morning my phone rang then switched off...then later on I heard the alert for the voicemail. Now it just wont quit. Any ideas? I've had this for 9mths, and its just started this. Thanks for all help.

Hi pike 13
Yes you can reset to factory setting ,But I prefer to reload your Device softwareBut if you do that without a proper backup you will lose all your data and application.Install BlackBerry Desktop software from here BlackBerry desktop software and do your backup. But I prefer to reload your Device software .Then you can try this :
KB11320 : How to perform a clean reload of the BlackBerry Device software using BlackBerry desktop software for windows
Or as you want How to reset the BlackBerry smartphone to factory defaults or you can simply do it on your handheld like this On your Home screen - Options - Security - Security wipe -Select the appropriate check boxes to remove data and applications as intended - Type blackberry, and click Wipe Data .
( I prefer security wipe as the last option )
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Notification Switch off in Lumia 710

How do i switch off the notification which pops up on the top of the screen when a message is recieved .. ?? I use a Lumia 710.

Hi vlabla,
Welcome to Nokia Support Discussions!
There is no setting to set your phone to switch on/off as per to a schedule. This is not possible with any application either, as they cannot access the core functions of the phone (such as power down etc.) by default.
So, I am afraid your only choice would be to put your phone on silent (press volume up and down and then tap the top right of the screen), check that there are no applications running (long press back button) and switch off Bluetooth, WiFi and location services to minimise the battery consumption. There are applications that will ease your access to these services, such as this.
Hope this helps!
Puigchild
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

How to switch off automatic creation of the business partner?

Hello!
Advise please why in erp after creation of the customer automatically form business partner? How to switch off automatic creation of the business partner? It very much disturbs, because business partner are created from crm. Because of automatic creation business partners are duplicated.

Hi,
I have made the following customizing settings to activate customer integration with business partner, but the problem is when I create a BP with a role (FI-Customer) the customer is not created automatically.
1. Set BP Role Category for Direction BP to Customer
Roles: FLCU00 - Business Partner FI Customer (FS: BP)
FLCU01 - Business Partner Customer (FS: BP)
2. Defined the Number assignment for Direction BP to customer
4. Customer account group and numbering is also defined.
3. Created a BP with BP Role FLCU00, I can see the Customer - General Data tab, but no customer was automatically generated by the system.
Kindly let me know if any customizing I have missed.
Regards
Ameya

Switch off default selection in partners pop up

Similar Messages

Maybe you are looking for