Switch off message determination

Hello,
Does anyone know how to switch off message determination while using BAPI_AGREEMENT_MAINTAIN.
Thanks,
Rajesh

Hi,
Go to:
SPRO-Materials ManagementLogistics Invoice VerificationMessage Determination-Maintain Conditions--ExecuteCreate Condition: Invoice Verification---
Output type--give Kons...Select company code...
Enter data as follows:
Company code          Name                           Funct                  Medium     Date
0001                    Company code-0001          PI          1     3
BNow save...and check..
Tx
Uts
Award if helpfull

Similar Messages

  • C5380 incorrect switch off message and 0x61011be5

    I get the error messages: 'incorrect switch off' and '0x61011be5' - the printer advises to switch off with the on/off button and not to disconnect to avoid damage.

    Hello Walcheren,
    Welcome to the HP Forums.
    I see that you are having an issue with an error code on the printers display.
    I am going to send you a private message with detailed troubleshooting instructions.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers, 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Why there is no way of switching off message text so there is only  name of a sender ???                    a name of sender

    Maybe someone knows how to do this and if posssible at all?

    Settings > Notifications > Messages > Show Preview > Off

  • Switching off message M8022

    Due to specific business requirements, we need to 'disable' the pop-up message M8022 (Allowed posting periods: 06 2009 / 05 2009 / 12 2008) for invoice receipt transactions.   However, I cannot include that message in OMMR.    Does anybody know how I can disable that message?   Thank you.

    Hi
    What is your business requiremnt that allows postings in a period that are not open.
    You can only post such entries using finance transactions where you can have special periods to post such entries.
    You cannpot suppress this message by any way.
    Thanks & Regards
    Kishore

  • Verizon BB 8830 WE Unlocked Shows Connected to GSM but can't make or receive Calls (Calls to the no says Device Switched Off)

    Hi!
    I bought a new Verizon 8830 World Edition unlocked from ebay. I confirmed that its unlocked from MEPD command (although it says Network: ''Inactive'' instead of 'disabled').
    I tried using various GSM network SIMs (India) in it and everytime, it shows an active tower and full signal levels and displays the name of the network correctly. It looks as if its connected to the GSM service at full signal.
    However, placing calls fail and any call made to the number gives a 'Switched Off' message. 
    I am totally flummoxed and don't know what to do.
    I have tried: Battery pull & Wipe out. 
    About: v4.5.0.186 (Platform 3.4.0.59)
    I would be very very very thankful for any pointers. Please help me!

    Hi Subhankar,
    The Connections are ON, the Network Selection is Automatic and the Mode is GSM
    The Connection is showing 'Connected', with Antenna and Full Signals, with the Name of the Network too.
    I have tried disconnecting and reconnecting, pulling the battery many times. However, calls are not successful and the number remains 'switched off'.

  • When I was talking on phone, suddenly the phone was switched off. i tried to switch it on but it gave the message....connect to itunes for set up.  when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it

    when I was talking on phone, suddenly the phone was switched off.
    i tried to switch it on but it gave the message....connect to itunes for set up.
    when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it to factory settings. It also said while restoring ypu will lose all media data but you can restore the contacts.
    I restored the factory settings....the phone was on recovery mode...it was verified by itunes and all that..but in the end it again said that iphone has some problem and can not function right now.
    after that when ever i connect it with itunes, it gives the message, it can not activate the iphone further, try again later or contact customer service.
    What to do now?????? Customer service people say..it is hardware problem

    If it's a hardware problem, then the phone will need to be replaced.
    There is no magic that can fix a hardware problem.

  • How to switch off 'Would you like to save changes?' message

    Hello.
    I am developing AddOn that has form of control type. This means some parameters can be specified (so editing mode must be on) but the data in database are never changed.
    So standard message that SAP B1 displays ( 'Would you like to save changes?' ) when closing form is useless.
    Please tell me how can I switch off this message.
    Best regards,
    Pawel.

    Hi Pawel,
    As A. Kerremans pointed out this is not possible, however if the item is not used to change the database you can set the AffectsFormMode property to false. This means that any change to the item will not change the form and B1 will not present you with message about saving the data (as it cannot detect that changes were made).
    Good luck.
    Best regards,
    Pedro Magueija

  • How to switch off the pop-up message in rspcm

    Hi there,
    Does anyone know how to switch off the pop-up message in rspcm?
    The monitoring user shouldn't get the pop-up below anymore:
    „Statusänderung des Requests – Sollen Folge-Events ausgelöst werden?“
    The pop-up in english might be
    “status change of request - trigger subsequent processing?” or similar
    We would like to outsource the process chain monitoring (rspcm) to our operating.
    But operating shouldn't deal with the pop-up above and make decisions especially when delta infopackages are involved.
    Thanks for your help in advance.
    Regards,
    Wolfgang Smetana

    Elena,
    Is the subsequent process defined on success or failure ? if that is not defined - you might come across this message.....
    Arun

  • HT201210 on my iPad I get an image of the USB connection and an arrow pointing to the itunes icon for a few seconds then it switches off.  connected  to itunes via USB get a message that itunes has detected an ipad in recovery mode must restore when i do

    When I havent got my ipad connected to a power supply I get an image on my ipad of the usb cable with an arrow pointing to a itunes icon and no matter what you try and do iyt stays on that for a few seconds and then switches off the ipad, connecting it through usb into itunes on my PC (XP) this image says on the screen but I get a message on itunes saying itunes has detected an ipad in recovery mode and mneeds to be restored - when I fire off the restore through itunes after a few minutes it comes back and says it cannot restore and give an error message 1603.  I have also repeated the process through my wife's laptop (Vista) and get the same situation -it is an 32GB Ipad 3 purchased last November -  any ideas ?

    Try and turn off iPad/iPod and proceed to step 3 of Recovery Mode.
    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • Switching off DEBUG messages in the admin console

    Hi
    I have the problem that I see a lot of debug information on the log when starting the admin console and navigation through the pages. It makes the admin console VERY slow. This must be some sort of low level debug stuff which I'm not able to witch off.
    I already made sure that debugging is switched off for the server (AdminConsole->Debug) and no diagnostic options are turned on. I also checked for a debug command line option in the start script.
    Some example debug output:
    DEBUG struts.util.PropertyMessageResources (PropertyMessageResources.java:284) - Saving message key '.assistant.jms.server.resumeconsumption.title
    DEBUG util.logging.Logger (Logger.java:118) - Delegating to RequestDispatcher for URI /jsp/contentheader/Messages.jsp
    Thank for any hints!

    You could add a dynamic text field to your app, add it to the stage and send notifications for whatever you need to debug.
    e.g. Just as you would use the trace("this message "+variableValue); in Flash to debug using the output window.
    You would use
    textfield_name.appendText("this message "+variableValue+"\n");
    or if you were listening for error you could use something like:
    private function errorXML(e:Event):void {
    textfield_name.appendText("XML Error:"+ e);
    I'm not sure how or if you can utilise the Xcode organiser with an AIR app.

  • HT3964 my macbook air keeps coming up with a message" are u sure u want to shut down..etc" after which it switches off by itself. now it's off and will not power on altogether. any suggestions?

    my macbook air keeps coming up with a message" are u sure u want to shut down..etc" after which it switches off by itself. now it's off and will not power on altogether. any suggestions?

    Does it power on if you plug in the charger?
    But to be honest I see in your description it says 'Late 2011' so there is a good chance you have warranty right, I would take it to Apple store and let them sort it out

  • Message Switch off

    Hello everyone,
    I am facing an error  "Account  is an affil. account and requires Trading Partner Message no. ZZ001" while posting customer invoices. Is it possible to change the message type from Error to warning or turn off the message itself?
    Regards,
    Santhosh

    Hello,
    These are also switched off in OBA5. However, it the message is still poping up.
    Regards,
    Ravi

  • Switch to package EAM_EHP4_SR_SFWS_SC is off,  Message no. R8371

    Hi Expert,
    in ECC DEV, I'm trying to activate DataSource SAP-R/3/PM/0PM_SCH_PLND_ORDER, but got this error:
    DataSource 0PM_SCH_PLND_ORDER; switch to package EAM_EHP4_SR_SFWS_SC is off
    Message no. R8371
    Please help. Thank you.
    Edited by: Ting Chen on Sep 10, 2010 7:32 PM

    Hi Ting Chen,
    I'm experiencing a similiar problem, how did you solve this?
    BR,
    Linda

  • Grey screen with message "turn off computer with power button until switch off then press again power button"

    Dear all,
    I'm very hungry with my iMac and my Time Capsule :
    I try for two weeks to restore my iMac without any success...
    I wait 80 hours to finally have the message again and again : "to restart your computer : turn off computer with power button until switch off then press again power button".
    But my iMac do not work !
    Could you help me?

    Hello, that's a kernel panic...
    http://thexlab.com/faqs/kernelpanics.html
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X 10.6 Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • How switch-off the message "your plagins are very old" on the top of window ?

    How delete (switch-off reminder) the message "your plagins are very old" on the top of window ?

    Is there a reason you don't want to update your plugins? Specifically your Adobe Flash and Adobe Reader are VERY old and leaving gaping security holes in your computer. Updating them is fast and easy and will not just remove the message but will leave you more secure.
    [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/]

Maybe you are looking for