Switch off vibration only in Viber

Hi,
Is there is a way to switch off vibration in Viber in my iPhone 5 with iOS 8? I receive a lot of messages per day, and it keeps vibrating every time in silence mode. I would like to switch on "Vibrate in Silence Mode" and do not have vibration in Viber.

Unless the Viber app provides for this in its own settings, no.

Similar Messages

Ringer won't switch to vibrate-only mode

I always keep the ringer volume all the way down to the vibrate setting on my 5s. Not sure how it happened, but at some point my phone switched out of vibrate mode and now when I use the volume buttons on the side of my phone the volume will go up and down but it won't allow me to go all the way down to vibrate only mode. I didn't change anything in my settings that I'm aware of. I have it on the lowest volume right now, but I want to get it back to vibrate only. Tried restarting the phone and it didn't change anything. Any suggestions

Upper left top, slide switch to have it just vibrate.
Good Luck

Late 2008 MacBook Screen switching off, but only in ML (10.8.3 currently installed)

The problem only seems to be with Mountain Lion (10.8.3 installed). Lion is installed on an external drive and it works without problems. The power saving settings are all off, so i dont know why it continues to switch the screen off. any help would be appreciated. Oh and I do intend on reinstalling, but the computer belongs to my wife, and she may not be able to be with out it for that time (for work and such). So anything that might help in the meantime would be appreciated.

Try a PRAM reset:
http://support.apple.com/kb/ht1379
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

I have a frustrating problem with my iPhone 5 post ios8 installation. The ring tone won't sound when phone is locked/switched off, although the vibration does work. I think it has something to do with "do not disturb"

Hi, I have a frustrating problem that seems to have occurred post iOS 8 installation. When my iphone5 is switched off the ring tone fails to sound i only get the vibration. If i am using my phone and a have an incoming call then the ring tone works as normal. I think it has something to do with "do not disturb" ... i see from the menu in "do not disturb" that under the heading "silence" there are two options "always" and "only when the phone is locked" This does not seem to make sense as i have to choose one or the other!
If anybody can help advise me on this problem i would be very grateful.
Thanks

Hello Mogulman46,
So what that means is when you have Do Not Disturb turned on, you may have an alert depending on the setting and how you are using your iPhone. So if it is set to Always, then that means that no matter what, your iPhone will not be notified. If it set to Only while the iPhone is locked, then that means that you will not get notification when your iPhone is locked but you will get notifications if your iPhone is being used. Also keep in mind the settings All Calls From can be set to certain contacts like Favorites, Everyone or no one. If you are using Do Not Disturb and you do not need it, then turn it off.
Use Do Not Disturb on your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5463
Regards,
-Norm G.

Turn off vibrate on alarm only

Hello,
I have an iPhone 6 with iOS 8.1.2 and I use the alarm to wake up every morning. I prefer to wake up to sound only without any vibration. If I turn off "Vibrate on Ring" in settings the vibration for the alarm also turns off, which is great. Unfortunately if I forget to turn it back on I will almost certainly miss phone calls or other notifications and on the flip side if I forget to turn it off before bed I have a heart attack when the phone starts vibrating with the alarm . Is there a way to leave the vibration on when the phone rings but have it off for the alarm? This would avoid me have to switch it back and forth everyday.
Thank you

Hey Mike,
You and I (and I believe a whole slough of people) have the same issue with this. It drives me up the freaking wall! Apple picked their fruit too early on this oversight. I have the iPhone 4S and it's the same song and dance. Everything your post says, is what I came to the interwebs for. C'mon Apple!! Address this issue that is driving people a little more insane with each and every alarm that goes off. I'm checking if the Samsung devices have this sorted out properly.

How can I delete e-mails from one IPad without removing them from other IPads on same icloud? I'ved tried switching off mail sync on all devices but this only works when deleting on IPhone

We have several portable devices and a mini mac on our system and have found that if we delete an email on one device it is removed from others.
We don't want this, but at the same time we need to keep our devices clear of clutter.
It was suggested that switch off the sync mail switch in settings - Icloud, but this only works on IPads & Ipods
anybody got any better ideas ??

We have several portable devices and a mini mac on our system and have found that if we delete an email on one device it is removed from others.
We don't want this, but at the same time we need to keep our devices clear of clutter.
It was suggested that switch off the sync mail switch in settings - Icloud, but this only works on IPads & Ipods
anybody got any better ideas ??

My Iphone 4 only charges when is switched off and it's not recognized by Itunes and Mac

Hello guys!! Please help me if someone knows what should I do. My iphone was working perfectly so far but a couple of days ago it stopped charging, its not charging neither with the a/c adapter and with the usb through my pc. It says device not recognized.. Today I had my iphone switched off and tried to see if it was charging and actually it was! But it didn't show that it was actually charging (the battery icon with the bolt didnt appear..but after 3 hours it was fully charged..but this happens only when its switched off..so i cant connect on itunes and i cant charge it while its turned on!! If someone knows please help!!!!!
I tried different cables and different computers and nothing. I can't restore because it's no recognized...
Thanks a lot!!

Hi, my iphone 4 was working fine a couple of days ago, but suddenly i plugged the device to my laptop and after a while i realized it wasnt charging, i have tested on a lot of computers but i got the same issue, even on a mac but its not detected.
So finally i turned off and after a while i realized the phone was fully charged, at least i found a temporary solution to this problem but its really anoying to switch off to charge the phoen, if you solve this problem please let us know, apple should fix this problem.
As you can see there is no charging logo when the phone is connected

E71 switch off 3G to use WLAN only

Hi
Ive just purchased an E71. I only have a finite amount of download data on my plan (Virgin) and travel overseas a bit. On the iphone apparently 'data roaming' can be switched off, so the phone cant access its 3G network (say to get emails overseas via Virgin in Australia- VERY expensive) but will link to available wireless networks in a cafe, or library.
Can I do this on the E71? Make it download email only via local, wireless networks as opposed to Virgin's 3G network?
M

You should set your email to manual update and to set connectivity to "ask first".
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Can I use the left or right convenience buttons to switch my ringer to vibrate only?

Trying to figure out how to switch my ringer to vibrate (with no ringing) only easier than going into the phone menu, any ideas?

On some of the Operating System verisons, for the Pearl, you can press the # key to switch between vibrate and your normal profile.
If you have a custom profile set, it will toggle between vibrate and the custom profile.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My G5 iMac only goes to sleep when ADSL modem is switched-off

My iMac will only put istslf to sleep if I switch-off the ADSL modem. I had the same problem with my G4 eMac. If I switch the modem off, the computer will quite happily nod-off. If I leave the modem switched-on and I return several hours later my computer will still be running. Can anyone make any suggestions on how to overcome this?

Hi Mike,
Do you mean a D-Link 302G?
I know that many of the Optus supplied D-Link modems actually have "Optus -customised" firmware installed, which even D-Link refuse to provide support for. Was the modem part of an Optus "package" or was it purchased separately?
If it is an Optus one you have problems, because D-Link won't provide support for the Optus firmware versions of their product, and at present Optus won't provide support for them either if they are connected to a Mac.
I have a suspicion that the firmware may actually be related to the problem, given that the same issue seems to have occured with two different computers. Optus aren't exactly renowned for their Mac support these days, I'm afraid, though there are suggestions that this may improve in the near future - see http://forums.whirlpool.net.au/forum-replies.cfm?t=531367
It would be interesting to see if a different modem behaved better. With the revised firmware the regular D-Link info probably doesn't apply. No chance of borrowing a different one?
(For what its worth Netspace are an Australian ISP who generally seem to provide good Mac support - they started off as a Mac focussed service called "MacInsanity" , in fact . I've been using them myself for many years.)
Cheers
Rod

As soon as I keep the iPhone (iPhone 5) on the desk the network goes off and when I swipe it then only it starts searching for the network and get it in 30 seconds. If someone is calling me during that time it says mobile is either switched off or outsid

As soon as I keep the iPhone (iPhone 5) on the desk the network goes off and when I swipe it then only it starts searching for the network and get it in 30 seconds.
If someone is calling me during that time it says mobile is either switched off or outside the coverage area.
Please help

You may need to force it into recovery mode. See here: https://discussions.apple.com/message/17766427#17766427

HT201263 iphone only shows logo for 13 seconds when connected to pc thats all it does however i connected to wall socket it goes up to connect to itunes but when i unplug it then it switches off

iphone only shows logo for 13 seconds when connected to pc thats all it does however i connected to wall socket, it goes up to connect to itunes but when i unplug it then it switches off.
this is coincidently after an ios update for iphone which i did just approx two days earlier which was suppused to fix battery issues?
also battery shows 100 percent full but as i explained if disconected from socket it switches off altogether.

Hopefully and most likely faulty battery. If you have Warranty or AppleCare, make Genius reservation and take to Apple for resolution.

My ipod only seems to switch on when it is charging, but once fully charged and taken out of its charger it switches off and doesnt turn back on? can anybody suggest what i should do or whats wrong?

Hi
my ipod recently has only been working when it is on charge. Once i take it off charge it switches off automatically, could you tell me the problem or how i can resolve this?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My iphone 5 is problem facing like that. when i switch off my iphone5 then plugh for charge with data cable or charger adapder or only data cable with no power connect phone is starting why? means on my phone Why? any one can explane this matter please. s

my iphone 5 is problem facing like that. when i switch off my iphone5 then plugh for charge with data cable or charger adapder or only data cable with no power connect phone is starting why? means on my phone Why? any one can explane this matter please. switched off my phone but on without power button . what is the problem?
Thanks
s.m slim

all iphone is same like that

Help urgently needed please ! My Iphone 4 is on silent vibration mode, received a call and has frozen with the Iphone unusable and yet vibrating. I have tried switching off, connecting to power, connecting to laptop and removing SIM card ???

Help urgently needed please ! My Iphone 4 is on silent vibration mode, received a call and has frozen with the Iphone unusable and yet vibrating. I have tried switching off, connecting to power, connecting to laptop and removing SIM card ???

Problem solved... just saw the answer in another thread... https://discussions.apple.com/message/13110222#13110222

Switch off vibration only in Viber

Similar Messages

Maybe you are looking for