Switch on modification assistant -- Very urgent
Hi,
How to switch on modification assistant?
I'm facing a problem in a standard include....modification assistant is not appearing
Regards
Jiku
Jiku,
See the below link
http://help.sap.com/saphelp_nw04/helpdata/en/83/7a18d1de6e11d195460000e82de14a/frameset.htm
To modfy the std programs SAP has provided the Modification assistant to clearly indicate the modification process(like Insert/delete with numbers).
Once you switched off it, you can't make it switch on .
once it gives the complete code accessable(SWITCH OFF), then it won't make it to ON again.
Courtesy-AnjiReddy.
K.Kiran.
Message was edited by:
Kiran K
Similar Messages
-
SPAU: Modification assistant switched off Upgrade ended
Hi,
I am trying to modify an Include in a function group, but I am not able to activate it.It shows a message 'Operation Terminated'.When I checked in SPAU , for the same include it says 'Modification assistant switched off Upgrade ended'. How can I switch on the modification assistant.Its Urgent ..
Regards,
SmithaHi,
Double click on the object and go to editing mode; edit if any changes are required .Usually this problem comes if all the changes of old version did not come to new system , manually add those changes and then activate it. The red stop sign will change in to green check. If u dnt have any changes to modify the object the also go to editing mode and activate it manually.
Madhu.
Edited by: Madhu Omer on Apr 16, 2009 12:52 PM -
Regarding Modification Assistant
Hi Experts,
We can switch off modification assistant in abap editor through menu edit->modfication operations-switch off assistant.By Default it is switched on.We have switched off it.
Now,I need to switch on the assistant but the option is not available now in the above mentioned path.
Please suggest me how can i switch on modification assistant?
Regards,
LakshmanHi...
I think by retrieving a version which has Modification Assistant enabled would Switch On the Modification Assistant..
Best Regards,
Pradeep. -
Hi,
I getting this error press on upload button , its working in google chrome and firefox
Error Page protection violation:
This may be caused by submitting a page that had not yet finished loading or by manual alteration of protected page items.For further assistance, please contact theapplication administrator.Contact your application administrator.
Please help me any oneFirst, please don't post questions/issues and start with "Very Urgent". If you have an "urgent" issue I recommend you contact Oracle Support. Second, if your issue is so urgent, I further recommend that you read this (url below) before going any further. Posting questions without including product names, versions, and related information like platform, configuration and so on, will make it almost impossible for anyone to help you.
http://blogs.oracle.com/shay/entry/10_commandments_for_the_otn_fo
Finally, I am going to guess and say that you are having problems with Oracle Apex version 4.2. If I am correct, I will tell you that this forum space is for Oracle Forms. APEX questions should be posted here (below). However, if you plan to post the same issue there, please consider reading the blog I mentioned above and follow its recommendations before posting anywhere else.
https://community.oracle.com/community/developer/english/oracle_database/application_express -
Trapped by the completely useless Modification Assistant !!!!!!!
Hi all you SAP gurus
Some background....
Our system SAP r/3 4.7
We have a number of SAP screens we have modified to include functionality for Quick Address. The modifications were a couple of extra screen elements and a bit of code. This allows the user to populate address information via "Quick Address" into the sap address screen. This worked fine until the latest SAP support pack (SAPKB62070) amended the screens in question (Function Group SZA1 screens 0201 and 0301). The result of the support pack was that our bespoke code was replaced by the newly modified SPack code and screen changes. Modifcation assistant was on.
The problem....
So we thought, easy, all we have to do is re-apply our bespoke code to the now changed screens. However, the Modification Assistant had decided that that's not going to happen !. The Modification Assistant refused to allow any editing of the screens at all. So we checked SPAU and found entries for SZA1 screens 0201 and 0301. We accepted the modifications for these objects in SPAU which created a transport request. The entries in SPAU were cleared and we got the green tick. The Mofication Assistant proudly anounced modifications were now possible, Horray !
But No ! All the Modification Assistant had done was replace the support pack changes with the old code, it had lied, the objects were still unmodifiable. Now we had old unmodifiable code.
To fix this we used the version control to put the support pack changes back in. This worked, however, the entry in SPAU for these onbjects now returned so the Modification assistant now refuses to allow changes to the screens and code.
We are now in the fabled "Modification Assistant Loop of Death !" We cant modify because there are entries for these objects in SPAU. If we sort theses out it puts old code back in and we still cant modify anything. If we restore the correct version a new entry is created in SPAU preventing any further modification.
And No....
We can't switch Moddifcation Assistant off for this object, It won't let us (so don't suggest that and expect any points !!!!)
My general perception of Modification Assistant....
A good idea, but appallingly implemented by SAP, it it is very far from "assisting" anybody.
Cheers,
Hugh "I do not like Modification Assistant" Gemmellthe fiend wrote:
Douze wrote:
Another issue with shuffle:
3 - The podcasts are not taken into account
That's because Podcasts are set to "Skip on shuffle". If you really wish to change that behaviour, in iTunes select the Podcast episode and choose *Get Info/Options* and turn off the tick-in-the-box for *Skip when shuffling.* Then Sync the iPod to make the changes on the iPod as well. (Skip on shuffle is the default and most Podcast listeners prefer it that way.)
Thanks, I wasn't aware of this option set by default. Don't see the point of having this option set as default... podcasts are not in the same spot by default... Anyway I know now what to do to shuffle my music and podcasts
the fiend wrote:
I'm not sure I've understood your first post, about the shuffle feature. Are you doing this in iTunes or on your iPod? (Not that it should make any difference, they should work the same way.) If I have my iPod set to shuffle albums and I start the iPod playing at (for instance) track 3 of "an album", then it should play track 3, then 4 then 5 and so on to the last track of that album. It will not play tracks 1 or 2 from that album. Then it will start at track 1 of "another" album, at random and usually by another artist and play it from track 1 through to the last track. Are you expecting another album _by the same artist_ to be chosen at random? If so, try going into the menu as follows: *Main/Artist/<artist name>/(play).*
I am playing the songs on my computer, either the mac or the pc. When I set "shuffle by albums" I would expect iTunes to randomly choose an album in my library and then randomly play the songs of the album. I don't want it to pick the first song all the time and play the other ones in order. -
Help with DAQmx tension measurement and saving to spreadsheet file with NI USB-6218 (very urgent !)
Hello people,
I've been given at the last minute a project at school where I need to do some data acquisitions (tensions) with a DAQ NI USB-6218 and it has
been miserable ever since, I first tried the "easy" way with DAQ assistant to save a given number of samples per channel to a text file
in order to use it in matlab, well...it isn't working : every time in my text file I have a different number of samples, I used the "Write to spreadsheet" function within a while loop where I wired the path outputs to a shift register in order not to have it asking me the path all the time,
but I'm still not getting the X number of samples per channel as specified at the beginning.
So I've been using another method with the DAQmx where I get each individual waveform into a vector of samples, when I look for the size
of the vector it looks Ok, 100 in my case but the problems start when I try to have a text file where each column will represent a channel for
subsequent matlab treatment, what I'm doing doesn't seem to be working, it's really unbearable, please help me sort this mess out.
I'll add both VIs as attachment so it can help you help me, thank you.
Basically what I need is to acquire 15 tensions with a given number of samples per channel (the same for each channel) and then plot it in matlab.
Note the first VI has switches to "unblock" each channel but it doesn't seem to be working, please look at both VIs.
It's very urgent, I could fail my school year if I fail this project.
Thank you very much for your help.
Attachments:
Projet EM acquisition - Copie.zip 78 KB
projet autre version envoyer sur forum.zip 20 KBHi Thank you very much for your help, in the meantime, I've changed the project to (see attachment), now
it is at least writing the waveforms to the txt file, but again there is an another problem, it seems to be ignoring the
number of samples I specified per channel, it seems to be writing into the txt file for as long as I keep the VI running.
What is missing ? Also I'd like to have a clock for my samples, that is when I plot in matlab I do not just plot random numbers, but the
physical analogical inputs as a function of time, that is for instance the first line corresponds to time 0, line 2 to time 0,001
ect...How could I do that ? For the meantime I got only 5 channels, when I know what my mistake is, I'll expand it to 15 channels.
Please help me.
Attachments:
acquisition 5 voies.zip 61 KB -
How to change the code w/o modification assistant
We have a scenario, where in we developed our programs on Projekt-test system.
Now that the development is done, all the requests were migrated to actual Projekt system through transport of copies.
Now when i try to change the code in actual projekt system's development system i cannot change it without modification assistant.
I heard there is some Program and when we run it it changes the source system of the object to the current system on which it is running / some configurations.
Please help asap. As it is very difficult to fix bugs using modification assistant.
Thanks and Regards.as soon as you go to the change mode.
there in menu you can find edit->modification operations->switch of assistant. -
Open items for purchase order its very urgent
hi
my requirement is to write extract program for purchase order(me21) to extract only open items.
please provide sample code its very urgent.
thanks in advance.
points will be rewarded.
thanks
hari prasad reddycheck the below report :
REPORT ZMM_OPEN_PO_REPORT no standard page heading
line-size 255
message-id zwave.
======================================================================
Program Name : ZMM_OPEN_PO_REPORT *
Description : This report displays all Open PO Items and output *
would be PO Number,Material number and so on *
Author : Seshu *
Date : 01/24/2007 *
MODIFICATION HISTORY *
DATE | AUTHOR | CHANGE # | DESCRIPTION OF MODIFICATION *
--|||--
01/24/07| Seshu | DEVK921979 | Initial *
D A T A D E C L A R A T I O N P A R T ***
type-pools
type-pools : slis.
Tables
tables : ekko, " Purchase order Header
ekpo, " Purchase order Item
marc. " Material with Plant data
Internal table for output.
data : begin of i_output occurs 0,
ebeln like ekko-ebeln,
matnr like ekpo-matnr,
end of i_output.
ALV Data declaration.
data : v_repid like sy-repid.
ALV Function Module Variables
DATA: gs_layout type slis_layout_alv,
g_exit_caused_by_caller,
gs_exit_caused_by_user type slis_exit_by_user.
DATA: gt_fieldcat type slis_t_fieldcat_alv,
gs_print type slis_print_alv,
gt_events type slis_t_event,
gt_list_top_of_page type slis_t_listheader,
g_status_set type slis_formname value 'PF_STATUS_SET',
g_user_command type slis_formname value 'USER_COMMAND',
g_top_of_page type slis_formname value 'TOP_OF_PAGE',
g_top_of_list type slis_formname value 'TOP_OF_LIST',
g_end_of_list type slis_formname value 'END_OF_LIST',
g_variant LIKE disvariant,
g_save(1) TYPE c,
g_tabname_header TYPE slis_tabname,
g_tabname_item TYPE slis_tabname,
g_exit(1) TYPE c,
gx_variant LIKE disvariant.
data : gr_layout_bck type slis_layout_alv.
Ranges
ranges r_eindt for eket-eindt.
initialization.
v_repid = sy-repid.
start-of-selection.
Get the data from EKKO ,EKPO and MARC Table
perform get_data_tables.
end-of-selection.
display the data in the form of ALV
perform display_data.
*& Form get_data_tables
Get the data from EKKO,EKPO and MARC Table
FORM get_data_tables.
clear : i_output.
refresh : i_output.
fill the dates in ranges
r_eindt-low = sy-datum - 7.
r_eindt-high = sy-datum + 14.
r_eindt-option = 'BT'.
r_eindt-sign = 'I'.
append r_eindt.
Get the data from EKKO,EKPO and EKET Tables
select aebeln bmatnr into table i_output
from ekko as a inner join
ekpo as b on aebeln = bebeln
inner join marc as c on cmatnr = bmatnr
inner join mara as d on dmatnr = bmatnr
inner join eket as e on eebeln = aebeln
and eebelp = bebelp
where c~beskz = 'E'
and c~werks = '1000'
and d~mtart = 'FERT'
and b~loekz = space
and b~elikz = space
and e~eindt in r_eindt.
if sy-subrc ne 0.
message e000(zwave) with 'No open purchase order found'.
endif.
ENDFORM. " get_data_tables
*& Form display_data
text
FORM display_data.
Fill the Fiedlcat
PERFORM fieldcat_init using gt_fieldcat[].
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = v_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = g_user_command
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = gr_layout_bck
IT_FIELDCAT = gt_fieldcat[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = g_save
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_ADD_FIELDCAT =
IT_HYPERLINK =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IT_EXCEPT_QINFO =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = i_output
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " display_data
*& Form fieldcat_init
text
-->P_GT_FIELDCAT[] text
FORM fieldcat_init USING e01_lt_fieldcat type slis_t_fieldcat_alv.
DATA: LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
Purchase order number
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'EBELN'.
LS_FIELDCAT-ref_fieldname = 'EBELN'.
LS_FIELDCAT-ref_tabname = 'EKKO'.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Purchase Order'.
ls_fieldcat-seltext_M = 'Purchase Order'.
ls_fieldcat-seltext_S = 'Purchase Order'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Material #
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'MATNR'.
LS_FIELDCAT-ref_fieldname = 'MATNR'.
LS_FIELDCAT-ref_tabname = 'EKPO'.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Material'.
ls_fieldcat-seltext_M = 'Material'.
ls_fieldcat-seltext_S = 'Material'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
ENDFORM. " fieldcat_init -
Please help me with the following two questions, very urgent
Hi All,
Please help me with some scenerios about what are the common problems when modifying a standard script such a standard Invoice script and how can we overcome them.
What are the common problems encountered when working with SAP SMARTFORMS and how to overcome them?
Please help me with these questions, its very urgent.
Thanks in advance.
MD.hi
hope it will help you.
reward if ehlp.
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
SmartForms System Fields
Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
System fields of Smart Forms
&SFSY-DATE&
Displays the date. You determine the display format in the user master record.
&SFSY-TIME&
Displays the time of day in the form HH:MM:SS.
&SFSY-PAGE&
Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
&SFSY-FORMPAGES&
Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
&SFSY-JOBPAGES&
Contains the total page number of all forms in the currently processed print request.
&SFSY-WINDOWNAME&
Contains the name of the current window (string in the Window field)
&SFSY-PAGENAME&
Contains the name of the current page (string in the Page field)
&SFSY-PAGEBREAK&
Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
&SFSY-MAINEND&
Is set as soon as processing of the main window on the current page ends
&SFSY-EXCEPTION&
Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
Example Forms Available in Standard SAP R/3
SF_EXAMPLE_01
Simple example; invoice with table output of flight booking for one customer
SF_EXAMPLE_02
Similar to SF_EXAMPLE_01 but with subtotals
SF_EXAMPLE_03
Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaption of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10) -
A very urgent deployment issue about DBAdapter
Hello All,
I have a very urgent deployment issue about DBAdapter.
That DBAdapter is connect to DB2 AS400 Database. I have a developing database (jdbc:as400://server01/TEST) and a production database (jdbc:as400://server01/PROD).
During developing, I used DBAdapter wizard to create it, and import some tables, and set the Adapter to use jabc/DB2DS as connection information for easily deployment later.
Then I deploy to Production. I configured Data-source.xml and oc4j-ra.xml rightly; I set DB connection point to production database. But the DBAdapter still write into developing Database.
I checked the DBAdapter, the imported tables are something like this, TEST.table1, TEST.table2. And there are a lot "TEST" located in DB2Writer_toplink_mapping.xml, DB2Writer.xml, TEST.schema, DB2Writer.table1.ClassDescriptor.xml.
This TEST is refrer to the TEST in connect String jdbc:as400://server01/TEST.
I think this might be the reason cause the problem. As to production database, "TEST" should replaced by "PROD". If I changed it manually, I have to change every time when switch between TEST and PROD. And I also don't know if it is safe to do it? (I tried, and bring some toplink mapping problem)
By the way, for Oracle Database, because we use 2 instances for testing and production with same schema name, and do not have this issue.
Anyone could help and many thanks.
Kerr
Message was edited by:
KerrHi Kerr,
The idea is to set up all connections in the BPEL or ESB services with logical names, e.g. typically of the form eis/DB/MyFinancialSystem or eis/DB/MyLogisticsSystem. This way, you do not have to modify code when deploying it onto different environments that serve different purposes.
When moving your services through their lifecyle, on every environment you deploy these to you will have the same logical connections configured on each instance, e.g. for DEV, QA, SIT, UAT and PROD. Only, in case of QA the actual physical connection is configured to point to the QA instance of the systems that your services interact with whereas in case of UAT it points to the UAT instance of the same system.
Maybe your problem is caused by connecting as user "SomeUser" when running the DB Adapter wizard during development and actually selecting objects from a different schema than you used to connect with, e.g. "Test" in your case.
Hth,
Sjoerd -
very urgent please.
some one make account on skype which is not belong to me , and put my mobile number and many people call me pleassse help me and till me how to hide my mobile number from this account which is not mine please help its avery urgent realy it disturb me
name on skype is vvvvvvvvvvvv525n this for person idont know and cheat using my mobile number
and you can check by calling me on the nubmer which not belong to account ownerlike what I mentioned above, you need to report this to the appropriate department. this is a user-to-user forum only, and users here (including the admins and mods) have very limited to users' account. they can't assist you regarding that case.
CONTACT SKYPE CUSTOMER SERVICE | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUPICIOUS CALLS AND MESSAGES | WINDOWS PROBLEMS TROUBLESHOOTING | SKYPE DOWNLOAD LINKS
MORE TIPS, TRICKS AND UPDATES AT
skypefordummies.blogspot.com -
Modification assistant in Local Program to be turned ON
Hi all,
I need to get the modification assistant ON for programs created on local system as well,
currently it works only for programs transported from other servers.
Is there a way to prevent the developer from Switching it OFF.
Thanks.MA will active for the programs which are not in ur domain (package ), but in this case u cannt .
Regards
peram -
Modification assistant or similar concept for Z program
Hi,
I have a requirement where I want to switch on the modification assistant for Z programs.
The requirement is such that I want the user to allow to make change for only a particular part of the code the rest part should be frozen for any changes. I think Modification Assistant will partially provide this.
But it seems that MA cannot be used for Z programs. Is there any other way to do this ?
Please pour in your thoughts.
Thanks in advance.
Regards
MeghaHi,
Why dont you try to create 2 objects ...1 main program with editor lock and the other 1 include program where in all the part that the user can change are there..much like the user-exit concept
Just a suggestion.
Regards,
Leonard Chomi -
Very urgent!!! pls help to debug!!!
Hi, friends:
when I work on a data loading project, use the script like:
INSERT INTO xhealthcall_script_data
(xhc_call_ended, xhc_switch_port, xhc_script_id,
xhc_fax_specified)
SELECT TO_DATE (hh_end_date || ' ' || hh_end_time, 'MM/DD/YY HH24:MI:SS'),
hh_switchport, hh_script, 'N'
FROM tmp_healthhit_load
WHERE hh_script != 'BROCHURE'
UNION
SELECT TO_DATE (hh_end_date || ' ' || hh_end_time, 'MM/DD/YY HH24:MI:SS'),
hh_switchport, hh_script, 'N'
FROM tmp_healthhit_load
WHERE hh_script != 'BROCHURE';
the problem is, when I execute this script, I always get the error:
ERROR at line 1:
ORA-03113: end-of-file on communication channel
then I was disconnected with database server in sqlplus (kicked out).
Background: all datatype for tmp_healthhit_load are VARCHAR2
This project is really very urgent, is there anyone can help me to figure out this problem?
thank you very much in advance, regards
jerryFrom metalink:
Note: 19790.1
Error: ORA 3113
Text: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel.
The problem could not be handled by the SQL*Net, two task, software.
This message could occur if the shadow two-task process associated with
a SQL*Net connect has terminated abnormally, or if there is a physical
failure of the interprocess communication vehicle, that is, the
network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup
files for the appropriate SQL*net driver and confirm SQL*Net software
is correctly installed on the server. If the message occurs after a
connection is well established, and the error is not due to a physical
failure, check if a trace file was generated on the server at failure
time. Existence of a trace file may suggest an Oracle internal error
that requires the assistance of customer support.
*** Important: The notes below are for experienced users - See Note 22080.1
Explanation:
There are numerous causes of this error. It is a 'catch all' type
error which means 'I cannot communicate with the oracle shadow process'.
This usually occurs when the Oracle server process has died for
some reason.
Diagnosis:
Oracle support need more information to determine what caused the
error. The most useful items are:
1) Does this occur when trying to (a) make a connection to the
database or (b) on an established connection ?
2) There should be a trace file from the failed session in
USER_DUMP_DEST
3) Does a particular statement reproduce this problem or is it
random ? Use SQL_TRACE on the session to find the problem
statement. -
High Contrast Mode (VERY URGENT)
(VERY URGENT...)
Hi all ....
I am developing a Java-Swing based application in Win2K and I need to find out whether the user has switched to the high contrast mode on the fly .... Is there any method that can be called to test the high contrast mode in J2sdk1.4 ??
Also... how do I get the new system font and the new system font size in the high contrast mode ???
Can somebody give me a sulution ??? I need it very urgently ....
Thanks a lot...
Ganesh C.N.I have got the same question for Windows XP. More generally, most of the apple applications (paje, calandar,contact..) interfaces (itune, icloud) and web pages (forum, support..) have a low contraste or colours that are impossible to change.
Any help would be appreciated...
Maybe you are looking for
-
Hi guys , I am very troubled with my ipod touch because I don't see my ipod folder showing up on my computer. i have tried all possible ways to make it viewable but somehow i end up seeing only my internal storage (dcim/pictures). Its really frustrat
-
How do I connect to a DB2 database from Oracle 10G on linux?
Hi I have tryed to connect to a DB2 database from oracle 10 G on linux. I have installed unixODBC and a db2 odbc driver. I can connect to the db2 using isql, but oracle comes with this error: select * from testtable@acc_spc_gr2 ERROR at line 1: ORA-2
-
Connected to wifi but can't access internet
My MacBook connects to the internet through wifi, but ipod, iphone and ipad only connect. Even though the bars are there indicating connection, I can't access the internet on any of the 3 devices. When I reset the router it the devices can acces
-
I don't know how to explain further. Should I give you the site name so you can see what I'm talking about?
-
Hi, I am new to XI and trying to understand more. I have following queries. 1. I have the following two different scenario: IDOC>XI>IDOC IDOC>XIFileSystem a. For both the scenarios the IDOC comes to XI from the same r/3 system. Is this Idoc