Switch over opened Bridge windows

In all past versions off Bridge (in Mac), I can switch over opened Bridge windows by pressing command + ` (or ~). This functionality aparently is gone in CS6. What happened? Is there another shortcut for this now?

Curt Y wrote:
The mac command to switch to open window is command - shift - tilde.  Is this what you are looking for?
I can confirm that works, Curt! 
Leo,
I can confirm Curt is right.  I just tried it in Bridge CS6 on my Mac running under snow Leopard 10.6.8:
Command+Shift+Tilde does work to switch to another open window!
Note that, on the Mac version, both [Control+SHIFT+~ ] and [Command+SHIFT+~ ] in Photoshop work exactly the same to cycle through open windows of the application.

Similar Messages

  • In my wife's window, the sound works, when I switch over to my window the sound doesn't work.  I noticed the problem when I went to a YouTube video.  How do I correct this?

    In my wife's window, the sound works, when I switch over to my window the sound doesn't work.  I noticed the problem when I went to a YouTube video.  How do I correct this?

    Hello Kiira Doon,
    The troubleshooting steps detailed below may help get your iPhone's display to function.
    Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
    Try turning iPhone off and then on again.
    While connected to the iPhone charger, try to reset the iPhone.
    If the low-battery screen appears, charge the iPhone.
    My issue is still not resolved. What do I do next?Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • Cannot switch to open finder windows

    when i command-tab to finder, my currently open finder windows do not appear! if i re-launch finder, finder behaves normally for a little while, but at some point open finder windows simply do not appear when i switch to the finder. i've properly switched to finder because my menubar says so; and if i use expose i can see that i do have a finder window indeed open, it's just hidden behind whatever application i was switching from.
    at first i noticed this problem was occurring right after running certain automator workflows as finder plug-ins; only some caused this to happen, not all of my finder plug-ins. i ran the workflows IN automator and it did not cause the problem, but immediately after running them from the finder the problem appeared. i've been using these workflows for months: appzapper, cleanapp, and a couple i made.
    but even if i don't invoke those workflows, the problem duplicates itself eventually, until i'm forced to restart finder!

    SOLVED.
    problem: having items in both the /Library/Contextual Menu Items and ~/Library/Contextual Menu Items.
    the program NoteTaker by Aquaminds automatically installs an item into your global contextual menu items; for some reason, the existence of items in both folders would break open finder window focus when switching to finder, after any contextual menu item was invoked--even if it's a standard OS X one, like "get info"!
    this has been annoying the crap out of me the last few days. amazing what revelations we have in the shower.

  • Photoshop CS6, Mac OS, switching through open images with OS command no more possible

    Using Photoshop CS6 (13.0.1) on a Mac Pro OSX v 10.6.8 it is no more possible to switch through open image windows with the OS related key combo "command <".
    There is also no Photoshop own configurable command available, that could solve this issue.
    CS5 or versions below always allowed that, and I very much miss this practical and fast switching between images, much faster then having to maneuver down through the "windows" menue.
    Anybody knows a solution?

    thanks conroy, Ctrl+Tab does the trick! - Gerhard

  • Problem opening Bridge CS5 in Windows 7

    When I open Bridge CS5 in Windows 7, I get a pop-up window from User Account Contro that asks "Do you want to allow the following program to make changes to this computer?"  The program listed is Bridge.  If I say NO, Bridge doesn't open.  If I say YES, Bridge opens normally.  This question pops up every time I open Bridge but not with any other CS5 applications or any other program.  Any suggestions?  Thanks,

    This is a permissions issue within the OS.  Next time you start Bridge right click on the icon and select "run as administrator" and choose yes.  Perhaps it will stick that way.

  • I switched on my PC and there was an update for realplayer. Since then firefox will not load. It is running according to Task Manager. I've downloaded a another copy of the programme using IE but whilst it loaded as a programme, does not open a window.

    I switched on my PC and there was an update for realplayer. Since then firefox will not open as a window. It is running according to Task Manager. I've downloaded a another copy of the programme using IE but whilst it loaded as a programme, does not open a window.

    Hi again,
    Helps if I give the correct link ! <br/>The press shift button appears to still work, but the option to start in safe mode from the programs listing of a standard install I do not think exists anymore.
    Safe mode will start from a command line, (or a shortcut) and in some circumstances you may need to enter the full path name on a command or shortcut detailed instructions are at http://kb.mozillazine.org/Safe_mode
    Remember (at least at this stage) do not make changes when you get the options list, just click on the continue button.
    If you think that RealPlayer is causing the problem you could uninstall that for now.
    Firefox recent versions are 3.6 4.0 (and 5.0 in beta). There is some debate as to whether creating new profiles or re-installing Firefox is the simplest method of troubleshooting and solving some of these problems, personally I use multiple profiles and multiple versions of Firefox, and tend to forget the required procedures are less than straightforward. For now at least try [[safe mode]] again.
    * see also Instructions for [[installing a previous version of firefox]]

  • Ince updating my firefox browser whenever i click on an internet link in an email it does not open on firefox although my mac switches to the firefox window as this is my default browser- what to do? Previously this has always worked without a hitch...

    ince updating my firefox browser whenever i click on an internet link in an email it does not open on firefox athough my mac switches to the firefox window as i have this set to be my default browser- what should i do?

    I have the same problem, and I also wondered if Google toolbar has anything to do with it. There GMAIL was set as the default mail application at first. I have removed that setting, but Firefox 4.0.1 continues to use GMAIL instead of Outlook which is my selection for mailto handling.

  • Can anyone tell me how to upload a url to an image onto facebook the way you could with a pc. Recently switched over to Mac and this is one thing I can't seem to figure out. Basically in Windows you could right click on an image, click copy the image url

    I've recently switched over to a Mac and before in Windows on a pc if you wanted to post an image on facebook you would right click the image you found on the post you wanted to share, then click copy url. You'd simply take that url and put it into the facebook post when uploading an image and that's all. Can not seem to find a way to do it now, other than saving the image to the computer and then uploading that which is not what I want to do. I've searched and searched but can't seem to find a solution other then posting in Parallels Window.
    Any suggestions??

    Thanks brody, I had been able to do that but on my business fb page I often post images and put in the links myself in the descriptions. In Windows you're able to post images by simply pasting in the url but on the Mac I'd have to download someone's image which I'm not comfortable doing so I find myself switching back and forth between the Mac and Windows.
    This link explains what I'm trying to do on the Mac probably in a less confusing way than I just did: http://howto.cnet.com/8301-11310_39-57496509-285/quickly-upload-photos-to-facebo ok-by-pasting-the-image-url/

  • I have Photoshop CS5, and use windows XP.  I cannot open Bridge from photoshop, whichI have done for years. When I am in Photoshop,when it opens, I always click on the bridge icon at the bottom of the screen, and it puts me into bridge. This is not happen

    I have Photoshop CS5, and use windows XP. I cannot open bridge from photoshop, which I have done for years.  When I am in Photoshop, when it opens, I always click on the bridge icon at the bottom of the screen and it puts me into bridge. This is not happening, the small wheel at the bottom of the screen just keeps spinning. Its like its stuck or caught in a loop. I can't get into bridge. I tried shutting down and starting up again but  the problem remains. Looking for help.  Dan

    Thanks for your response, I was able to open bridge from File-Browse in Bridge.  This worked, but was not able to go back to the way I always opened Bridge.  At least I could get to Bridge and go into Camera Raw. I never tried to open Bridge from the Start menu.  The odd thing about this is, it has happened before, and to get it "unstuck" and working again, I would shut down and restart again in a few minutes, and things would go back to normal.  This time it did not go back to normal after several attempts.  I shut down for about 3-4 hours, restarted, and it seems to be back to normal again. I am not sure if it's a problem that is getting worse each time it happens.       And yes I am using Mini Bridge in photoshop CS5.  Thank you for your help.  Dan

  • Bridge CS6 won't open in Windows 8 PC

    First time trying to open Bridge from Photoshop it says "Waiting on Bridge CS6...If i try to launch Bridge alone nothing happens.
    I had Photoshop 2 installed on my PC when I installed the new CS6 suite. I've heard this may be an issue. Most searches for a fix speak about Windows 7 and not Windows 8. Win 8 is different, so I am still dead in the water!
    Help please!

    No nothing about Win8 as it is a step down from Win7, although newer.  But it should have the same files if you can figure out how to access them.
    Have you looked a post #1 of this thread?  http://forums.adobe.com/message/5338052

  • I have a licensed copy of Adobe Acrobat X Pro for Windows.  I recently switched over to MAC OS and would like to move my Adobe X Pro over but the CD will not work for Mac OS?  Can anyone assist me with this conversion?  Best,  James.

    I have a licensed copy of Adobe Acrobat X Pro for Windows.  I recently switched over to MAC OS and would like to move my Adobe X Pro over but the CD will not work for Mac OS?  Can anyone assist me with this conversion?
    Best,
    James.

    you cannot use your pc license to install on a mac.  you would need a separate license (and serial number) for that.
    adobe allows platform swaps, but only with the latest (xi) version, Order product | Platform, language swap
    your option to use acrobat on a mac are to upgrade to acrobat pro xi and change platforms, use a windows emulator (parallels/boot camp etc) on your mac or swap with a third party.

  • Full screen mode: How to switch between open windows?

    Hi There,
    Is there way to get CMD + ` working in full screen mode?
    Other shortcuts like CMD + OPT [ ] to switch between open tabs and CMD + TAB to switch apps seem to work - but without the ability to switch between open windows within the same app, full screen mode is kind of useless.
    Any pointers in the right direction would be much appreciated.
    BTW I'm using Yosemite but the forums won't find a Yosemite community (not sure the community search is working properly)
    Cheers

    or:
    And some additional shurtcuts:
    OS X: Keyboard shortcuts - Apple Support
    http://www.danrodney.com/mac/
    cmscss wrote:
    Hi There,
    Is there way to get CMD + ` working in full screen mode?
    Feedback: www.apple.com/feedback/

  • Opening a new window over a new window

    The command given below in javascripts opens a new window.But if I
    execute the same command in an another open new window then it doesn't
    open a new window,infact it is over the existing window !
    But my requirement is to open a new window everytime I want to do a new
    functinality.
    Please help me.
    onClick="window.open('New.jsp','NewWindow','location=no,menubar=no,resizable=yes,toolbar=no,scrollbars=yes,left=' + window.screen.availWidth*1/8 + ',top=' +window.screen.availHeight*1/14 + ',width=' + window.screen.availWidth*3/4 + ',height=' + window.screen.availHeight*6/7)"

    Hi Jetsam thanks for all u replies.
    Well I know what was the problem
    My href statement was
    <a href="JSPFile4.jsp target = "Window3" onClick="window.open('','Window3','location=no,menubar=no,resizable=yes,toolbar=no,scrollbars=yes,left=' + window.screen.availWidth*1/4 + ',top=' +window.screen.availHeight*1/6 + ',width=' + window.screen.availWidth*3/6 + ',height=' + window.screen.availHeight*6/6)">Manohar</a>
    was same for all the pages.Hence all the page was being opened at the
    same spot.Well changed some info like top,left etc and the new window will be opened in different location and we will distintly see a new window being opened.
    thanks again Jetsam for ur replies.

  • New pc with windows 8.1, downloaded and installed cs5,no problem open bridge and cs5, but can't read raw file , try to update, can't complete or failed updating, please help

    new pc with windows 8.1, downloaded and installed cs5,no problem open bridge and cs5, but can't read raw file , try to update, can't complete or failed updating, please help

    Sounds like you somehow got the mac version.
    Download the windows 6.7 camera raw update from this link:
    Adobe - Photoshop : For Windows : Camera Raw 6.7 Update

  • I am unable to open certain pages on sites. I have to switch over to IE because the new Firefox update is not accomodated on their websites! When will this be fixed... sites included Ameritrade, FAFSA, and others...

    Question
    I am unable to open certain pages on sites. I have to switch over to IE because the new Firefox update is not accomodated on their websites! When will this be fixed... sites included Ameritrade, FAFSA, and others...

    First and foremost, you should update to 3.6.17 because the version you're running at the moment is insecure and exposes your system to attack. Update via '''Help '''| '''Check For Updates'''.
    That may even fix the problem since several minor bugs were also fixed in later versions.
    Similarly, after updating, go to the [http://www.mozilla.com/en-US/plugincheck/ Plugins Check] page and update those which are necessary.
    If the problem persists, try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit.
    I didn't experience a problem myself accessing any of those sites you mentioned. See screenshot.

Maybe you are looking for