Switch/Router can only use PAP to communicate with IAS

I was securing my switches to allow users to login using radius and notice that I have to set the IAS server to PAP for the Cisco equipment to authenticate. Is there an alternative to this since PAP is clear text.
[ PC ]__SSH__[Switch]___PAP___[ IAS ]

When using SSH to the switch for switch based authentication you need to
enable PAP on the Radius policy.
Telnet/SSH work on PAP only.
Regards,
~JG
Do rate helpful posts

Similar Messages

  • I am new to IPAD and I want o use facetime, how can I use it to communicate with my mac at home, do I need to create another account with a different email account

    I am new to IPAD and I want o use facetime, how can I use it to communicate with my mac at home, do I need to create another account with a different email account

    do I need to create another account with a different email account
    Yes, the email addresses need to be unique to each device. You may use the same Apple ID on each device, but the email address used by each device needs to be different.

  • When try to view a movie with a external reader it makes a weird noise at time and other times works fine I think I read somewhere theat you can only use thereader that came with your computer

    When I put a movie DVD in my external reader it makes a strange noise and at times it gets hung up I have to force quit it and then I can eject the dvd
    I believe I read some wherre that you can only use the reader that came with my computer

    That sounds like the drive is faulty. CD and DVD will have seperate heads, and burn and read will be different lasers in each. If it's still in warranty I'd exchange it.

  • How can I use Voip to communicat with my voice in Labview

    i want to be able to call my computer using Voip. I know this service
    cost money. I dont just want to call the computer, i want to call
    labview and all labview to have access to my voice, so i can do speech
    commands on it.

    Hello,
    Thank you for contacting National Instruments. I would like to apologize for the delay in responding to your support request. I understand that you would like to use Voip capabilities to access your computer remotely and then communicate with LabVIEW using speech recognition.
    I know of a LabVIEW example file that describes the voice recognition capabilities of LabVIEW. Also, there is a link to example programs within this database entry. To access the entry, go to the National Instruments support portal: http://niweb2.natinst.com/ae/portal.htm and search for �voice recognition LabView.� Click the first entry in the list: �Voice Recognition in LabVIEW - Example - Development Library - National Instruments.� You will be able to find helpful information here.
    I hope this helps! Please let me know if I can help you further. Have a great day!
    Kind Regards,
    Joe Des Rosier
    National Instruments

  • I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use?

    I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use? Essentially having two wifi connection off the same network? If so how do I set this up?

    Extending using a wireless connection always results in a performance compromise.
    If the Express is going to extend using a wireless connection, then the Express will need to be located about half way between the AirPort Extreme and the general area where you need more wireless coverage. The more that you have line-of-sight between the Extreme and Express, the better the network will operate.
    Remember......the Express can only "extend" the quality and signal speed that it receives, so it needs to be located where it can get a very good signal from the Extreme. Although Apple cleverly uses the term "extend", a more accurate term for the Express would be "repeater".
    If the Express will extend by connecting to the Extreme using a permanent, wired Ethernet cable connection......highly recommended for best performance.....then the Express can be located exactly where you need more wireless coverage. There is no signal loss at all through the Ethernet cable, so the Express gets a full speed signal no matter where it might be located.
    Post back to let us know which way to you want to go.

  • 2 atv's both have home sharing enabled but one asks to turn on home sharing on my pc but it is on so can only use one at a time to watch movies from my computer

    2 atv's both have home sharing enabled but one asks to turn on home sharing on my pc, but it is enabled on pc so I  can only use one at a time to watch movies from my computer

    Both atv,s are on the same network, they are wirless and the computer can see them and they are named different.
    what ever one i switch on first gets to stream from my computer and the other one asks for home sharing to be switched on, then if i switch both off and start the other one first it gets to stream and the other one which worked asks for home sharing to be turned on. i have hidden all functionality, netflix etc as these are for my 7yr old kids.

  • IThanks all you out there. I do budget (NYC DOE school); can only use Explorer to PROCESS on mygalaxy.nycenet.edu. PLEASE HELP. (popups unblocked)

    The NYC DOE has set it up so can only use Explorer for budget portal (myGalaxy) & purchasing (FAMIS) https://dfoforms.nycenet.edu/FamisPortal/Login.aspx . I'm a Mac lover but can only get older version of IE no longer supported. Is there EITHER; 1) a way to set it so the above can be accessed from Mozilla; or 2) (& maybe for Mac help) a way to get IE for a Mac? Thanks for all you folks do. (SIDE NOTE: I tried Chrome-some features I liked but it "took over" my whole computer too much so I just use Firefox (+ IE for school work).

    You can try using an extension to pretend to the website that you are using IE ([https://addons.mozilla.org/en-US/firefox/addon/user-agent-switcher/ https://addons.mozilla.org/en-US/firefox/addon/user-agent-switcher/] may help), but there are no guarantees, as the website may use ActiveX (which is an IE only format).

  • TS1286 cannot hear voices en phone call can only use headset

    cannot hear voices en phone call can only use headset

    try to switch to loudspeaker mode. If both loudspeaker and normal mode doesn't work, then ur speaker would be damaged. Visit your nearest apple service center.

  • I have two users with different music on each itunes and i can only use one library, how do i use both for one iTouch?

    i have two users with different music on each itunes and i can only use one library, how do i use both for one iTouch?

    Chris, I believe this link may have the information you're looking for. Welcome to discussions!
    http://docs.info.apple.com/article.html?artnum=300432

  • How can i detach the video from a clip so i can only use the audio when using imovie?

    how can i detach the video from a clip so i can only use the audio when using imovie?

    First, go to iMovie/Preferences and enable the Advanced Tools.
    Import the video clip into an iMovie Event. When you get ready to use it in an iMovie Project, select the clip in the Event and drag & drop it on top of a video or photo clip in the project at the place where you want it to begin. When the pop-up menu appears, choose Audio Only.

  • With 10.2 I can only use system speaker output for audio, NOT my RME FF400 I used previously. The FF400 works fine with other apps. How can I set this device in FCP 10.2? (it is set in both system preferences and midi)

    With 10.2 I can only use a system (e.g. speaker) output for audio, NOT my RME FF400 I used without any problems previously. The FF400 works fine with other apps (some like TwistedWave) setup in the program, and others (like Spotify) using system preferences & audio midi setup. How can I set the FF400 to be the sound output device in FCP 10.2? N.B. The FF400 is set as sound output device in both system preferences and audio midi setup.

    From the fcp.co forum. See if this does anything for you.
    simon_hutchings
    OFFLINE
    Junior Boarder
    Posts: 24
    Thank you received: 5
    Karma: 1
    I have the solution! Well it at least worked for me. This is the response I got from Apple, Can you please try the following steps towards fixing your audio issue, and report back with your results?
    1. Open the application Audio Midi Setup (located in Applications : Utilities)
    2. Select the Output Tab for the current output device
    3. Select the Configure Speakers option
    4. Select the Multichannel tab
    5. Change the setting to Stereo Now mine was set to stereo but the left channel wasn't showing left. re-clicking on stereo reloaded the settings and after clicking apply it worked. 

  • I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini. don't need the caps/lock or ctrl key and due to an injury my daughter can only use her left hand to type. She is using a text to speech app to verbaliz

    I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini. I don't need the caps/lock or ctrl key. Due to a brain injury my daughter can only use her left hand to type. She also uses a text to speech app to verbalize all of her needs since her speech isn't intelligible any longer either. And her vision was significantly affected also, so the keyboard has to be mounted about 6 inches from her face. So to reach across the keyboard with her left hand to the right side delete and enter button is physically difficult and causes typing errors, which cause people to not understand what shes trying to say.
    The best keyboard so far is the Zagg folio mini. I just had to make stickers to enlarge the letters on the key buttons.
    Does anyone know how I can reprogram these two keys? Or where I can buy a wireless mini keyboard for Ipad made for lefthanders with these two functions on the left side. I have searched for days and days. It's sooooo important to me that she be able to contribute her voice again. Imagine if you got in a car accident and couldn't speak clearly any longer, but understood everything still. Thanks for any help and suggestions you all take the time to share with me. I really appreciate the kindness of strangers to help me help my daughter.
    Sami's mom

    Sami\'s mom wrote:
    I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini.
    You cannot.

  • I can only use Flash Player in one tab at a time, only on Firefox.

    Recently, when I downloaded the new Flash Player, I can only use flash player in one tab at a time. This is only in firefox. I'll open youtube, and the visual and sound both play perfectly. I open up a new tab, begin using a flash website in that tab, and the youtube sound is quiet, only the visual continues to play. I need to multitask with flash sometimes, and this is a big problem for me. Help!

    By default, Flash 11.3 and higher will spin up a lot of distinct processes. You should be able to get quite a cacophony going.
    Have you ever done any troubleshooting that involves changing how Firefox works with plugin-container.exe or the Flash player's protected mode?
    Often it is helpful to disable hardware graphics acceleration in Firefox and in Flash:
    (A) In Firefox, un-check the box here and restart:
    orange Firefox button (or Tools menu) > Options > Advanced > General > "Use hardware acceleration when available"
    (B) In Flash, see this support article from Adobe: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues
    Unrelated, but you can remove the Java Console extensions unless you are a Java developer (and even then, you probably don't need the old ones):
    orange Firefox button (or Tools menu) > Add-ons > Extensions category

  • I just downloaded ios7 now i can only use the phone with the speaker, how can i fix this?

    I just downloaded ios7 now i can only use the phone with speaker, how can i fix this?

    x

  • Since installing an icon-editing add-on, I can't open tabs any more / I can only use one tab at a time.

    Ever since I installed the add-on Favicon Picker 2 that lets you change the bookmark icons, I can't open tabs any more. The second tab will open, but if you try to go to a site, the FIRST tab redirects to that site. Basically, I can only use one tab at a time. Is there any way I can keep this add-on and use tabs?

    Oh, wow - look at that, you're right :) I didn't want to uninstall the add-on as I like the feature, but simply by disabling it you can keep the new icons AND use tabs. Thanks dude!
    (The add-on is Favicon Picker 2 0.6.2.15 by the way - some of the user reviews report the same problem.)

Maybe you are looking for

  • Crosstab column width in HTML output

    Hi, I have problem with column width in a crosstab report with html ouput. I can not find a way to control the column width, and the more I try to control this either with word table properties or with xsl attribute, the more messy it gets! Now the c

  • Converting report output to a word document

    Hi, Can anyone pls help me by providing the program for converting displaying/inserting the internal table values along with the table frame aound the internal table(in the sense displaying the rows and columns lines) to the word document not in the

  • How to redeem a gift card?

    I have a gift card I'd love to use, but I can't for the life of me figure out where to go to redeem it. The store wants to automatically put it on my credit card, which is not what I want. I can find no options for entering a gift card at all. Help?

  • User in possible agent list but no task in user's workplace

    Hello, i had a small problem with my workflow. The process works fine but sometimes i can see an interesting situation - in the log of wf I can see that one concrete user is in a list of possible agents - BUT when i log in as this user i see NO tasks

  • Very Urgent...problem while creating SQ01

    Hi Friends, When I'm trying to create sq01 it is throwing the error like"the User Nanditha is not assigned to any user group". Pl help me to resolve this issue. Thanks in advance. Nanditha