Switch Service Between Bionic and Original Droid

I am transitioning from my original Droid to a Bionic. However, I would like to continue using my original Droid at work. (I've killed the camera in the original for work, and would prefer not to do the same with the new Bionic). I was expecting to be able use *228 to switch the service between the two phones, but I now understand that *228 does not work with the 4G Sim Card. Is there still a way to switch my number back and forth between the two phones?

Hi Fool68,
I see the reason why you want to switch devices, since you have limitations on using the camera while at work. Thank you to the community for your responses.
With a 4G phone, once the line is switched to a 3G device, the SIM card does have to be replaced in many cases. Changing devices from 4G to 3G is different, as the community mentioned. Below is some additional information.
original 4G SIM can be re-used with the same phone number if the technology change back to 4G is processed prior to 12:00 a.m. ET of the day the 3G change was initially completed.
After 12:00 a.m. ET, a new 4G SIM is required in order for the line to go back to 4G.
SIM cards can be obtained online, if needed. There is no charge for a SIM replacement. To order online, please make the change of the devices online and visit http://www.vzw.com . Login to your online My Verizon Account (with the Account Holder Number).
If a replacement card is needed, you will receive this option in the screen when making the change in devices and there is no cost.
I hope this information is helpful. Have a good day!

Similar Messages

Diff between ides and original package

can any one tell me what are main diff between ides and original package
thanks
with regards,
phani

HI.,
IDES saytem is like a play ground in which we do all the transcations,But in Real time systme we dont have as many reference clients as IDES systme have,We have one reference client 0001 In real time systme as their land scape is laid as development,Testing & Production systems
Important thing is all the screens & T.codes are sames in both
REWARD if helpfull
Thanks & Regards
Narayana

RTMPE between Edge and Origin

Hi,
I would like to know when this feature will be available. As well as rtmpe between FMLE and Origin.
Many thanks.

I will check with product managment about these features and get back to you.

HT2729 How do I switch movies between sd and hd on my computer

How do I switch movies between SD and HD.

System Preferences > Display > Arrangement
Drag the white Menu bar from the main screen to the second screen.

Miix 2 10" led diod on the switch filter between display and edge frame

Hello,
i have Lenovo Miix 2 10" and i find out, that indicative led diod on the switch filter between display and edge frame of tablet when is the dark.
It is obvious in the night and tablet is moderately incline...
https://onedrive.live.com/redir?resid=2193765AA1BD42F1!7232&authkey=!AJ7TZCTfNtVztuI&v=3&ithint=phot...
Is it reason for reclaim?
Thanks
sg

Hi chuck72352,
after you have sorted your data, you can use the InRange Function. Combined with a "search 1D Array" you'll get the range you really want.
Mike
Attachments:
ArraySubset.PNG ‏25 KB

Does Solaris publish a feature / function mapping of container services between Docker and Solaris ?

Docker is getting huge attention but most consider it not ready for production. Does Solaris publish a feature / function mapping of container services between Docker and Solaris ?
Solaris containerization has been battle tested in production for many, many years.

You need to understand how IPMP is used within Sun Cluster. Start reading at
http://docs.sun.com/app/docs/doc/819-2968/6n57jmghj?a=view and
http://docs.sun.com/app/docs/doc/819-2969/6n57kl141?a=view
for a brief description. In a nutshell - the IPMP group is providing availability on the interface level for each node, so that a single NIC failure is not resulting into a service loss.
The IP adresses you configure directly (ie. via /etc/hostname.* setup) are always considered local to a given node.
In order to configure highly available IP adresses, which move between nodes and which should be used for the application you make highly available, you must use the SUNW.LocgicalHostaname or SUNW.SharedAdress resource types. Have a look at
http://docs.sun.com/app/docs/doc/819-2974/6n57pdjtt?a=view on how to configure them.
Greets
Thorsten

How to switch progamatically between line and symbol plot ?

I am trying to switch between symbol and line plot (XY-graph) programatically. (I know jow to do it on the front panel.) I thought I could do it through property nodes, but there is no PlotType property node, only PointType, LineType, and LineWidth. If I set LineWidth and LineStyle to zero I get a continous line connecting my symbols. If I set LineWidth to zero and LineStyle to 1, althoug, the Legend shows only symbols I get a dashed line connecting the symbols. Also, is somewhere a desciption what the LineType and PointType codes mean?
Thanks,
George

When you right click on a plot legend and select 'Common Plots', there are several plot properties that get changed. There is no single property to change between the different option. I would recomend that you place a property node on you block diagram and select Plot.Point Style, Plot.Line Style,Plot.Line Width, Plot.Plot Interpolation, and Plot.Plot Fill To and create indicators for each. Then manually change the Common PLots setting and take note of the diffferences. There is help for each of the properties and the help will refer you to the front panel menu options. For example, the help for Point Sytle says that the values are 0-16 as shown on the menu from top-left to bottom-right.

After installing lion, my computer switches constantly between dashboard and current screen

I installed lion this morning and my screen switches rapidly between the dashboard and current screen, initially i thought it was my mouse, but after changing mouse I still get this issue and when my computer has been out of use for a while, i have to "erase" the screen to get to my login, any ideas?

After restarting your computer, try booting into the "recovery HD" by holding down Option at startup and try re-installing Lion. I had the Same problem when I installed Lion but that fixed it.
Rember: back up your data first through time machine so you can restore to the backup once you get Lion reinstalled.

View Selector - Switch issue between Graph and Table Data

Hi:
We have created the report with both Table view and Chart View. Both of them has been added to the View Selector and added to the Dashboard. While performing the testing we found that sometimes the Switch between the views are not happening. Meaning when we try to switch from Chart View to Table View, the View changes in the drop down but the original Graph to table will not switch. In order to make that happen we need to try 3 or 4 times across the drop downs from Table to Chart and then chart to table.
Did any one face the similar issue. Any suggestions or insights on this.
Please help.
Thanks & Regards
Sunil Kumar T.S.

hey there RAM,
here are a few tips...
1. what is the table field with the right value? and is this table field in the *itm extractor?
2. can you include this field into the extractor?
3. could it be a calculated value?
hope this helps.

Can you switch back between CS5 and CS5.5 with the same project with Premiere??

Hey all,
I just got CS5.5 for Mac (Lion) and was wondering if i am able to save a project and open it with CS5 Premiere because I work with one other editor who has CS5. I have tested saving a project in CS5.5 and opening it in CS5 but it says that it needs to convert first but then it seems to work fine. So basically, is there workflow good between the 2? Any known issues or anything else i should know about when switching back and forth?
Also, I have the student edition of CS5.5 and was wondering how many times can I install it? I plan on buying a new computer in a few months from now but currently have 2 and was wondering if i should install it on both my current computers and then deactivate one and install it on my new computer in the future? Or is there a limit and that will not work?
Thanks!!

Because it has to create a new "version" of your project every time you go back and forth, you'll end up with umpteen versions if you go back and forth every time which could become a nightmare for you... And because it creates new "versions" every time, you're far more likely to end up with a corrupted file at some point... I'd stay away of going back and forth between versions...
As an aside, does anyone know if you can go back and forth between the same version (CS5.5) on different platforms (Mac/PC)? I may need to start doing that soon at work, and I've never tried...

Satellite P10 switching randomly between Battery and AC

I have a satellite P10 that's been having some strange power issues for about a year now.
My laptop will switch over to battery power even when plugged in. I will then either use the computer until the battery drains and have it shut down or hibernate before the battery will charge.
I thought I had fixed it by downloading and installing a new Bios from the toshiba website, which seemed to work for a while but now it the problem seems to have returned.
I have also bought a new battery and power bar, thinking this was the problem...but this did not solve the problem.
Anyone else out there with similar problems or a method of fixing this?
any thoughts would be great.

Hi Greg,
I suffered this phenomenon on my SA30-141, and by trial and error I found it to be a poor contact between the AC socket on the notebook and the AC plug on the adapter cable. Using the technique that Dennis described I tried waggling the power plug when it was connected and found that I could induce the notebook to switch to battery power following which it would not return to AC power without a complete re-boot.
I resolved this problem by anchoring the AC cable to the back of the notebook with a small strip of plastic wrapped around the cable and then clamped to one of the nuts on the back panel of the notebook with a spare bolt. This stopped any lateral movement of the AC plug when it was connected even if the notebook was moved about.
regards,

Unable to switch quickly between bluetooth and handheld

This seems like a basic question/function, and it may be something that should happen automatically, but...
I love using my Bluetooth. But, if I have turned "off" (basically closed the bluetooth) so that it is not receiving a signal anymore, and my phone rings, I cannot answer the phone without having to reactivate the bluetooth and using it to answer.
Seems to me there should be a quick option, or the Droid Razr Maxx should have a setting where it recognizes whether or not my Bluetooth is functioning and allows me to simply answer the phone "normally"
Would appreciate any advice on this. It's a little annoying to realize that I have a "hands free" function, but that I need to keep that "hands free" gadget within "hands reach" in case the phone rings!

Thank you for your help -- I am still having problems here!!
When my bluetooth device is Paired but not connected --- for example, if I happen to take my cell phone up to bed with me, but do not bring the bluetooth and the bluetooth device is CLOSED (so it is still paired, but not connected).....
If my cell phone rings --- I CAN answer the phone and I can hear the other person speak, but they cannot hear me speak at all. My cellphone display DOES not give me the option to select Bluetooth
The 3 buttons at the bottom of the cellphone page
Bluetooth is NOT lit and I CANNOT select it
Mute is lit in white (and I can toggle that on and off green light)
Speaker is lit in white (and I can toggle that on and off green light)
I have unpaired and re-paired the bluetooth, I have powered down and powered up the phone....
I still have the same problem.

IOS8 bluetooth do not switch properly between Music and Coursera

I have a 2012 Subaru outback and a 2014 Subaru Impreza. I have the same bluetooth connection problem on both cars.
My iphone 6 plus is paired so when I start the car, the bluetooth system will start playing the tracks in the Music or Podcast. That have been working great, no hiccups. However, when I switch to Coursera app to listen to the downloaded videos, the speakers would go on mute while the video is playing. If I turn up the volume, that will trigger the audio system to start playing Music again, although the active app is still Coursera. Does anyone know how to fix this?
I have 2 hours commute each day, and really need to be able to listen to Coursera along the way. Thanks...

i am having this problem too
any ideas?

Response time difference between copy and original

I have make an export of my database like that :
EXP system/manager@mybase owner=myowner file=exp_mybase_myowner.dmp
and an import in new session (on same server):
IMP system/manager@mybase2 full=y file=exp_mybase_myowner.dmp
To increase performance of my two databases, i have drop all indexs and recreate them.
But, response time is significantly different between databases.
How can i solve this problem ?

1. Analyze all the tables that are used in your query by using command:
Analyze table <table_name> compute statistics;
You can alsp use package DBMS_STATS.GATHER_DATABASE_STATS to calculate the statistics for all object in DB.
2. Have you checked the DB_BLOCK_SIZE for both the DB? Is it same? Command "SHOW PARAMETER DB_BLOCK
4. Is the SGA size same for both the DB? Command "SHOW SGA"
3. Was there sufficient RAM to create the SGA? I hope you are not using SWAP space for the SGA

Switching display between external and eternal monitor?

I have a laptop with few functions but I have a port for external monitor. I plugged it in and, of course, nothing happened. How can I switch the view?
/Richard

riwa wrote:
I have no idea what Fn+Fn5 means. Is that an Fn+F5? If so, do I need the screen connected to actually notice any difference (IE to be able to tell if it works).
[edit]
With that said I meant that I've tried it without the screen connected and without success.
[/edit]
I think you should have another screen connected
I have an Acer Aspire 1694wlmi and I confirm that the key is Fn+F5
But I haven't gotten my TV-out to work yet!
(Ati mobility radeon x700)

Switch Service Between Bionic and Original Droid

Similar Messages

Maybe you are looking for