Switch SGE2000 illegal software format - Firmware upgrade
Hey guys,
I am trying to update the SGE2000v1.0 with 24ports to 3.0.1.0:
http://www.cisco.com/cisco/software/release.html?mdfid=282414067&softwareid=282463181&release=3.0.1.0&relind=AVAILABLE&rellifecycle=&reltype=latest
I got the error "illegal software format" using tftp.
Any ideas, maybe old hardware version v1.0?
the same problem but solved recently - can not use tftp to upgrade from line 1 to line 3 firmware (read release file for details)
before: two SGE2000 with firmware 1.0.0.45
- from product page get 3.0.0.17 or 3.0.0.18 firmware version (Easy Upgrade Utility will be included)
- unpack and use Easy Upgrade Utility to upgrade firmware
- upgrade to 3.0.1.0 by using Web Interface (or tftp)
good luck and let me known if solution works in your case too
Similar Messages
-
SG300-28 switch in boot loop after firmware upgrade
After performing a firmware upgrade on an SG300-20 switch from ver 1.1.0.73 to 1.2.5.70 the switch now boots up with the following error and resets:
30-Aug-2011 10:47:33 %L1Mngr-F-PARAMTOOLONG: csco-sb parameter %s is too long.
The attached file contains a full output of the console boot process.
I have tried loading different versions from the console, but all produce the same error.
Has any one any idea how to resolve this issue?
Thanks
DesHello Tom, Thanks for your reply,
I had done the process before with the 3 firmwares offered in the cisco website. I did it again, and i get a boot loop again, with following error:
%L1Mngr-F-PARAMTOOLONG: csco-sb parameter serialNo is too long.
Any ideas?
Thank you,
Nico
Console
Startup Menu
[1] Download Software
[2] Erase Flash File
[3] Password Recovery Procedure
[4] Set Terminal Baud-Rate
[5] Stack menu
[6] Back
Enter your choice or press 'ESC' to exit:
Downloading code using XMODEM.
-- Download complete --
Calculating file's checksum...OK
Erasing FLASH ->>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Writing to flash 0x6aa500 records...
Setting checksum: 0x350925f6 , Address: 0x0
OK.
Flash programming success.
Perform WARM BOOT ...
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.0.0.4 Built 08-Apr-2010 16:37:57
Networking device with Marvell ARM CPU core. 128 MByte SDRAM.
I-Cache 16 KB. D-Cache 16 KB. L2 Cache 256 KB. Cache Enabled.
MAC Address : 58:35:d9:96:7f:5d.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%
Decompressing SW from image-1
100%
OK
Running from RAM...
Board ID is 22
Device ID 0xdf5111ab
*** Running SW Ver. 1.2.7.76 Date 19-Jul-2012 Time 17:54:43 ***
HW version is V
Base Mac address is: 58:35:d9:96:7f:5d
Dram size is : 128M bytes
Dram first block size is : 101376K bytes
Dram first PTR is : 0x1900000
Dram second block size is : 4096K bytes
Dram second PTR is : 0x7C00000
Flash size is: 16M
19-Jul-2012 17:54:46 %CDB-I-LOADCONFIG: Loading running configuration.
19-Jul-2012 17:54:47 %CDB-I-LOADCONFIG: Loading startup configuration.
Device configuration:
Slot 1 - SF302-08MP
Device 0: GT_98DX1005 (AlleyCat)
-- Unit Standalone --
Tapi Version: v1.9.5
Core Version: v1.9.5
19-Jul-2012 17:55:02 %L1Mngr-F-PARAMTOOLONG: csco-sb parameter serialNo is too l
ong.
***** FATAL ERROR *****
Reporting Task: ROOT.
Software Version: 1.2.7.76 (date 19-Jul-2012 time 17:54:43)
***** DEBUG *****
DEBUG LOG IS EMPTY
0x16a614
0x167054
0x6bdc18
0x490518
0x4959e4
0x495bac
0x815674
0x816b10
0x817e64
0x1d51e8
0x1cb010
0x121d3c
***************** SYSTEM RESET ***************** -
SG300-10MP Firmware Upgrade Fails
Trying to upgrade a SG300-10MP from firmware revision 1.10.68 to 1.3.5.58 when I try to upgrade I keep getting an error that says
"Error Message: Copy: Illegal software format"
I have tried using the HTTP copy as well as TFTP with the same results. I have tried upgrading to a few other older releses and get the same error.
Any thoughts?Looks like Cisco small business products dont support the cisco network assistant. I have tried the web console with both Internet Explorer and Firefox.
-
Will the Software Update to 10.4.7 install firmware upgrade for SuperDrive?
Will the Software Update to 10.4.7 install firmware upgrade for a SuperDrive?
I have a Mac mini and I've just let the Software Update run as needed, but I am confused by the number of Apple update downloads listed.
I don't believe I need them, when I just use Software Update?
Seems like a simple question, but I was on Windows for the last 10 years.
Thanks,
--Todd
Mini Mac OS X (10.4.7)Believe Software Update.
-
ZEN TOUCH 20GB - Stuck in Recovery Mode, during Firmware upgrade. HEL
Ooooh dear.
Me and my Zen Touch are completely stuck. Decided to upgrade the Zen's Software and Firmware and am now in deep trouble. Here are the steps I took.
First I sensibly backed up the 2000 songs on the player to my computer. Then I updated the MediaSource software and restarted the computer. Then I decided to go for the big change and downloaded the new PlayForSure firmware installation and that's where the problem starts - It never completed the installation, which I had to manually stop. I knew as part of puting this new Firmware onto the player, the Zen would be wiped clean, which it has. However, I now cannot get it out of recovery mode and it will not respond to attempts to download the new (or any) Firmware onto it.
What I now get is:
-Plug the Zen in, the computer recognises that there is plug and play equipment attached and makes the appropriate noise.
-The Zen will switch itself on as a response (or I can do it manually), with a normal-looking startup. It then briefly flashes a screen saying "Firmware Problem" before going into recovery mode.
-If I choose Clean Up, it takes a few seconds to clean the now empty disk, and returns to the recovery menu
-If I choose Format All, pretty much the same as Clean Up
-If I choose Reload Firmware, it warns me that the firmware will be erased. And asks if it should reload it via USB. You say 'yes' and it briefly flashes up "Start firmware update now" before returning to the recovery mode menu.
And finally, if I select Reboot, that's exactly what it does; the computer recognises that it's turned off, makes the noise, and recognises when it's turned on again.
Trying to download the Firmware from the computer, however, has turned into a nightmare. I've tried downloading the PlayForSure firmware and old Firmware from the files on my computer (running XP, by the way). And I've also tried prompting the Zen starting up the Media Source software, BUT they all claim that the player is NOT connected! Even though it is! The Zen switches on and Windows makes a sound every time I connect or disconnect it!
So what to do? I'm stuck in this vicious circle and no matter what random tricks I try, I can't get out. The player needs Firmware, but the software on the computer claims the player's not connected.
The player is now more than a year old, so I can't return it, and Creative's less-than-generous telephone support is not an option, so I'm left to any imaginati've and kind-hearted subscribers to this list to offer suggestions.
HELP!
Mark in the UKMy son?s Zen simply turned on one morning and refused to do anything except enter recovery mode, giving a firmware problem error and Creative Zen v0.0.58After an hours research I solved the problemI hope this helps someone out, but remember anything you do is your responsibility not mine, continue at your own judgment
Creative site SingaporeDownload driver and firmwarehttp://sg.creative.com/support/downl...ype=0&x=30&y=6
download driverCreative Zen and Jukebox Driver Upgrade version .30.03
firmwareCreative Zen Firmware .00.02
Install driver, connect Zen, should show up in my computerAnd yes, when you open the Zen from there it WILL say not correctly connectedBecause the firmware is corrupted! But it is connected Go to the firmware file and double click, the firmware software will connect to the ZenAnd overwrite the firmware. Follow the on screen instructionsYou may get a warning that the firmware is the same version etc. just do it, as at the moment the Zen is useless. Good luck and if it works repay me by helping someone -
Linksys SRW224G4 firmware upgrade fail!!!
Hi,
I have a switch SRW224G4 from Linksys and doesn't work now after an firmware upgrade!
If is possible, I need that switch so a rapid answer will be appreciated!
Simple, here the result when I try to install the firmware "ls_106-12216.ros" or "SRW224G4P_SRW248G4P_image_v1020.bix" that came from your web site!
Here the result for "ls_106-12216.ros"
Calculating file's checksum...OK
Erasing FLASH ->>>>>>>>>>>>>>>>>>>>>>>>>>
Writing to flash 0x32d980 records...
Setting checksum: 0x19527ef1 , Address: 0x0
OK.
Flash programming success.
Perform WARM BOOT ...
------ Performing the Power-On Self Test (POST) ------
UART Channel Loopback Test........................PASS
Testing the System SDRAM..........................PASS
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.0.0.06 Built 23-May-2005 16:58:25
Linksys SmartSwitch based on 88E6218 with ARM946E-S.
32MByte SDRAM. I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%
FAIL !!! Check image for valid file.
Please download a new image.
Here the result for
Downloading code using XMODEM.
-- Download complete --
Wrong file format. Writing aborted.
Perform WARM BOOT ...
Thanks,
SteveI just tried updating the firmware in my SRW224G4 using the file "fesm-12216.ros" as indicated based on my bootloader version 1.0.0.06.
Now it's stuck in a reboot loop. Here is the log from Hyperterminal starting from the update:
Startup Menu
[1] Download Software
[2] Erase Flash File
[3] Password Recovery Procedure
[4] Enter Diagnostic Mode
[5] Set Terminal Baud-Rate
[6] Back
Enter your choice or press 'ESC' to exit:
Downloading code using XMODEM.
-- Download complete --
Calculating file's checksum...OK
Erasing FLASH ->>>>>>>>>>>>>>>>>>>>>>>>
Writing to flash 0x2e4180 records...
Setting checksum: 0x1709abda , Address: 0x0
OK.
Flash programming success.
Perform WARM BOOT ...
------ Performing the Power-On Self Test (POST) ------
UART Channel Loopback Test........................PASS
Testing the System SDRAM..........................PASS
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.0.0.06 Built 23-May-2005 16:58:25
Linksys SmartSwitch based on 88E6218 with ARM946E-S.
32MByte SDRAM. I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%
Decompressing SW from flash
100%
OK
Running from RAM...
*** Running SW Ver. 1.2.2a Date 05-Apr-2007 Time 15:35:50 ***
HW version is 00.00.02
Base Mac address is: 00:12:17:5d:08:d5
Dram size is : 32M bytes
Dram first block size is : 16969K bytes
Dram first PTR is : 0xF6D840
Flash size is: 8M
01-Jan-2000 01:01:05 %CDB-I-LOADCONFIG: Loading startup configuration.
01-Jan-2000 01:01:08 %ERHG-F-SEND: BOXP_perform_smi_scan_of_devices_in_slot: inv
alid device type is found: 268374443 on device 0
***** FATAL ERROR *****
Reporting Task: ROOT.
Software Version: 1.2.2a (date 05-Apr-2007 time 15:35:50)
***************** SYSTEM RESET *****************
It just repeats this over and over. The unit is out of warranty. Can I do anything to get this switch back up and running?
Should I try reloading the firmware again or updating the bootloader?
Any help would be most appreciated!
Thanks. -
Hi,
Quickly following automatic firmware upgrade on 1 week old Time capsule, network is now lost. Airport set up utility can't find Time Machine .. others experience the same problem? TM feels hot .. perhaps overheated due to firmware upgrade. Solutions welcome.Your computer came with OS 9.0.4 installed. OS9.1 is required for Classic so is handy to have, and apparently your firmware installer requires 9.2.1 You can use free updaters to update to any later OS9 version from any earlier one.
I don't see any option but to obtain a used copy of OS9. Make sure you get the gold full retail version rather than a machine specific version since the latter will only work in those computers for which they were designed. You can get away with a machine specific version as long as it exactly corresponds to the model and build of yours, but that is often hard to confirm until too late in the purchase.
Note that any drive you want to use with OS9 either for purposes of installing OS9 or for running software will have to have OS9 drivers present on it. These are installed when you format a drive and cannot be installed later without reformatting the drive (and losing everything on it). If your computer still has its original drive then those will likely still be on there unless you reformatted the drive with OSX and did not select the keep OS9 drivers option (there's no harm in doing so and it saves a lot of trouble for doing exactly what you are trying to do). You can can have a drive present that doesn't have the drivers but it simply won't be seen by OS9.
Disconnect all third party hardware (including PCI cards) when updating the firmware.
Message was edited by: Limnos -
Why wont nokia firmware upgrade get beta like the iphone,cause nokia upgrade is so stressing u backup,format,do this do that jeez.but iphone just click update everything starts like magic only what u have to do is keep the internet connection steady others are done by the upgrader software. PLEASE NOKIA HELP US TO HELP YOU MAKE UPGRADING MORE EASIER BY INTRODUCING NEW FIRMWARE THAT WILL BE MUCH LIKE APPLE iphone. Please nokia users,help to persuade.
Not only iPhone but Motorola upgrader utility also doing like iPhone. I have a Motorola KRZR K1 and I have upgrade its firmware and its utility first backup all the data from mobile then doing firmware upgrade and then restore everything. Many users asking NSU to do like this and hope Nokia also will make NSU like this. We have to wait for it.
If you like my post then give me "Kudos" star... -
Firmware upgrade for Westell UltraLine Series3 A90-9100EM15-10 ?
I'm wanting to check for/download install a firmware upgrade for my Westell UltraLine Series3 A90-9100EM15-10.
It's currently running
Software Version: 1.02.00.04
Release Date: Aug 28 2008
I'm hoping there's an upgrade available that fixes the HDMI Handshake/dropout problem?
Anyway, the screen I'm taken to after clicking "upgrade" in the router's management UI says :
Check every xx hours at URL _______
The field after "at URL" is not populated.
If I click "check now" I get:
"URL must be in the format: protocol://userassword@hostort/path where protocol is one of http, https, ftp or tftp. Either user or password, or both, may be left out. The port number is also optional."
Was that URL field supposed to be populated by the tech who installed the FIOS?
Where can I find that URL so I can paste it in and get my firmware updates?Nevermind. I've found it. The link to 1.03.00.08 firmware is http://download.verizon.net/webdownload/firmware/upgrades/westell_router_9100em/A90-9100EM15-10-1.03...
-
Creative MuVo TX FM Firmware Upgrade 1.18.02 - The End For Many Players - Par
This is part 2 of the story since you cannot post such a long message in one posting.
>>Dear >>>>in my first mail I wrote already:>>>>After installing the recovery driver I run the >>firmware update again. It says that it found a >>device in recovery mode and more (pretty quick >>message) and after this it searches for this >>device - and does not find any device connected >>to an USB port.>>>> From this statement you can see that I installed the recovery drivers
>>and put the player in recovery mode. Then the player is seen by your >>update software since it finds the player in recovery mode. But after >>this it cannot transfer the new firmware because suddenly it does not >>see the player anymore on an USB port...>>>>To be honest - if your support team would read the mails a bit more >>carefully we all could save a lot of time... And of course I did >exactly>>as described by you and in the update notes. And this all on two >>different computers with two different OS - XP and Win98 as I said in >my>>first mail already...>>>>Best Regards,>>>>Peter>>>>>>>>At 02:6 .0.05 +000, you wrote:>>>Dear xxxxxx>>>>>>Thank you for replying to us.>>>>>>In response to your email, kindly ensure that your player is used on >>the>>>minimum operating system requirement. When connecting your player >>>directly to the computer, was your player being recognized? I have >>>verified the firmware update.>>>>>>Kindly verify the below steps you have used to update the firmware for>>>>>your player: >>>. Download the MuVoTXFM_PCFW__8_02.exe file into your local hard >>>disk.>>>2. Connect your player to your computer.>>>3. Double-click the firmware upgrade file.>>>4. When prompted to set your player in Recovery mode, disconnect your
>>>player from your computer. Press and hold the Play button while >>>connecting your player to your computer's USB port. Continue to hold >>the>>>Play button for about 0 seconds after connecting your player to your
>>>computer. Release the Play button when the Find New Hardware dialog >box>>>>>>>appears on the computer screen. Did you encounter any issue?>>>5. Follow the instructions on the screen to install recovery drivers >>for>>>your player.>>>6. Double-click the firmware upgrade file and follow the instructions
>>on>>>the screen.>>>>>>Are you still encountering the same issue?>>>>>>Do email back on the status concerning the issue so that I can assist
>>>you further. Thank you. >>>>>>Best Regards>>>>>><name removed>>>>Technical Support>>>Creative Labs Asia>>>>>>To provide feedback on your "Creative Experience" please click on the
>>>following link:>>>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>>>>>========== >>>DISCLAIMER >>>========== >>>This email and any attachments may contain private, confidential and >>>privileged materials for the sole use of Creative's intended recipient>>>>>and is not to be forwarded or copied to others. Any review, copying >or>>>>>>>distribution of this email or any attachments by others is strictly >>>prohibited. If you are not Creative's intended recipient, please >>inform>>>Creative immediately by responding to this email and thereafter >>>permanently delete the original and any copies of this email together
>>>with any attachments. Thank you>>>>>>Original Message Follows:>>>------------------------>>>Thanks for your response. I am a bit confused since I answered many of>>>>>your questions in my last mail already. And I have been working with
>>>computers for more than 30 years and did many upgrades with THIS >player>>>>>>>already. Since other users have exactly the same problem - if you >check>>>>>>>the forum - it must be a problem with the player or your upgrade >>>software. Should I send the player to your company for repair? But in
>>>any case - you should warn the customers using this upgrade or take it>>>>>from your webpage. If you read my old mail - I tried the whole upgrade>>>>>on 2 different OS and 2 different Computers with your latest drivers.>>>>>>Best Regards,>>>>>>Peter>>>>>>>>>At 07:38 0.0.05 +000, you wrote:>>>>Dear xxxxxx>>>>>>>>Thank you for reaching us at Creative Technical Support; we >appreciate>>>>>>>>the opportunity to assist you.>>>>>>>>Based on the information you provided, may I know if are you using >the>>>>>>>>player on Windows XP>>>> or Windows 98? I would like to inform you that the player only >>support>>>>>>>>>>the below operating system:>>>>>>>>Microsoft? Windows? 98SE/2000/Me/XP>>>>>>>>You might like to consider the below factors when connecting your >>>player>>>>to the computer's USB port:>>>>>>>>. Make sure you have the latest drivers, especially USB, installed >>for>>>>your motherboard. If you're not sure, check with your motherboard >>>>manufacturer.>>>>>>>>2. Make sure your motherboard has USB v. ports, supplying at least
>>>>500mA to the USB ports. If you're not sure, check with your >>motherboard>>>>>>>>>>manufacturer.>>>>>>>>3. Try unplugging all other USB devices from the system.>>>>>>>>4. If you're using a hub, try connecting the product directly to the
>>>>onboard USB and vice versa.>>>>>>>>5. You might wish to verify the functionality of your product on >>>another>>>>computer.>>>>>>>>Do let me know the result.>>>>>>>>In case if you need any clarification, please do not hesitate to >>>contact>>>>us. Thank you.>>>>>>>>Best Regards>>>>>>>><name removed>>>>>Technical Support>>>>Creative Labs Asia>>>>>>>>To provide feedback on your "Creative Experience" please click on the>>>>>>following link:>>>>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>>>>>>>========== >>>>DISCLAIMER >>>>========== >>>>This email and any attachments may contain private, confidential and
>>>>privileged materials for the sole use of Creative's intended >recipient>>>>>>>>and is not to be forwarded or copied to others. Any review, copying
>>or>>>>>>>>>>distribution of this email or any attachments by others is strictly >>>>prohibited. If you are not Creative's intended recipient, please >>>inform>>>>Creative immediately by responding to this email and thereafter >>>>permanently delete the original and any copies of this email together>>>>>>with any attachments. Thank you>>>>>>>>Original Message Follows:>>>>------------------------>>>>=======================>>>>>>>>Subject: CLA (CTL) - Technical Support Request - (MuVo TX FM)>>>>Name: xxxxxx>>>>E-mail Address: [email][email protected]][email protected][/url]>>>>Country: Thailand>>>>Self Description: Advanced PC User>>>>------------------>>>>Support Inquiry: ID(3) My Creative hardware stopped functioning >>>>correctly >>>>Product: MuVo TX FM>>>>Serial Number: C6PF32477002804Z>>>>Date Of Purchase: /2/2005>>>>>>>>------------------>>>>Operating System: Windows XP>>>>Creative Model Number: MUVO TXFM 52 MB>>>>Computer Brand/Model: >>>>Processor/CPU: >>>>Memory: >>>>BIOS Type/Revision: >>>>System Board/Chipset: >>>>------------------>>>>>>>>Detailed Problem Description:>>>>I tried to update to the latest firmware >>>>MuVoTXFM_PCFW__8_02 since I stay in Thailand >>>>and need the Thai letters. I installed the >>>>recovery driver since the upgrade software >>>>required this and did exactly what is described. >>>>After installing the recovery driver I run the >>>>firmware update again. It says that it found a >>>>device in recovery mode and more (pretty quick >>>>message) and after this it searches for this >>>>device - and does not find any device connected >>>>to an USB port.>>>>>>>>I have tried this many times and even with the OS->>>>Win98. The upgrade software detects the device in >>>>recovery mode but after this nothing more >>>>happens - it does not find it on an USB-Port >>>>anymore. >>>>>>>>=======================
Moderator note: Please remove the name of the advisor when posting up e-mails.
Message Edited by Catherina-CL on 0-3-2005 2:4 PMThis is part of the message since you cannot post such a long message in posting.
This should show how lost you might be with your warranty. If you install the Firmware Upgrade .8.02 your player might be useless. There is no way to make it work again. Not really. If you understand what Creative seems not to do. So dear user - buy a new player. If you want to know what the solution is to make your player work again post here. If there are enough postings I will explain it here. Too sad that Creative does not do it. It is their job not mine... But again - I am not talking about a problem what is nice to have it solved. I am talking about a player that does not work anymore. If you do not want to wait for my solution just send your player for repair - it was not your fault that it does not work anymore...
This story with the great support was a test of Creative and will be used in a review. So be not surprised to find it somewhere else.
Here the Creative support story. The first mail is at the bottom. I had to make part and part 2 since you cannot post such a long message here.
To: Creative Labs Asia Customer Support <[email][email protected]][email protected][/url]>Subject: Re: CLA (CTL) - Technical Support Request - (MuVo TX FM) (KMM7755874I6636L0KM)Dear,I know the solution long time already. I just wanted to test the support at Creative. The problem is real and forces owners of your players to buy a new one since their playes get useless after the upgrade. Not only that Creative puts a faulty upgrade on their homepage - their support is good for nothing. But this was a test of the Creative support. I hardly can believe that Creative is not in the position to solve a very simple problem caused by Creative - what has severe consequences for their customers. But this mail story confirms exactly this. So my advice to any customers - stay away from this company and their products - what is the final result of my test. If you want to know the solution for the problem please contact me again - I am glad to help such a poor company :-)))) For free? I am not so sure...since my player was not for free too...Best Regards,PeterPS: The product is still within the "police period" of my dealer. And I did not just buy the product. If you ever read what your system tells you (what I had to enter) - it was long time ago.
At 03:48 3.0.05 +000, you wroteear PeterBased on the information you provided, since you have just bought the product locally, you may like to contact and check with the dealer firstfor their purchase policy period and see if the product is still within their policy period. If they are unable to assist you, do contact us so that we can assist you promptly in your issue. Thank you. Best Regards<name removed>Technical SupportCreative Labs AsiaTo provide feedback on your "Creative Experience" please click on the following link:http://www.**bleep**.com/support/con...asp?r=CLA&d=TS========== DISCLAIMER ========== This email and any attachments may contain private, confidential and privileged materials for the sole use of Creative's intended recipient and is not to be forwarded or copied to others. Any review, copying or distribution of this email or any attachments by others is strictly prohibited. If you are not Creative's intended recipient, please informCreative immediately by responding to this email and thereafter permanently delete the original and any copies of this email together with any attachments. Thank youOriginal Message Follows:------------------------Dear .,I am a bit confused. What does my problem have to do with buying it on an oversea/business trip? This you really have to clarify. And why do you need my contact number/residential address if you have my contact email address already? You want to come to me and bring me a new player?Would be fine :-) But since there are many others with the same problem there must be a better solution.But in any case - I bought it were I li've and not on a business trip - the dealer is just around the corner - but I guess with more than 30 years almost daily IT experience I have a bit more knowledge than him. Igave you the serial number and the date of purchase. I bought it in Thailand where I li've now. Best Regards,PeterAt 09:28 2.0.05 +000, you wrote:>Dear Peter>>Regards to your issue, may I know is the unit purchase locally or during>Oversea/Business trip? If the unit is purchased during oversea/business
>trip, kindly provide me with the information of the place of purchase, >your current location (residential address) and contact number so that I>will be able to provide you with the advice required promptly.>>Do email back on the status concerning the issue so that I can assist >you further. Thank you. >>Best Regards>><name removed>>Technical Support>Creative Labs Asia>>To provide feedback on your "Creative Experience" please click on the >following link:>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>========== >DISCLAIMER >========== >This email and any attachments may contain private, confidential and >privileged materials for the sole use of Creative's intended recipient >and is not to be forwarded or copied to others. Any review, copying or
>distribution of this email or any attachments by others is strictly >prohibited. If you are not Creative's intended recipient, please inform>Creative immediately by responding to this email and thereafter >permanently delete the original and any copies of this email together >with any attachments. Thank you>>Original Message Follows:>------------------------>Dear ,>>I was talking about Win98SE. I guess there is are not many people using
>Win98 anymore.>>The problem is that the player is in recovery mode already. When I plug
>it into the USB port it does not show up as a dri've anymore. But the OS>confirms that I have put in a device into the USB port when I plug it in>pressing the play button. Also when I run the upgrade software it says >that it has found a device in recovery mode but then it does not find it>anymore. But again - neither WinXP nor Win98SE allow me to format the >dri've since it does not show up as dri've at all.>>Sorry for all this. But realize that I and many others have a piece of >scrap as long as we cannot find a solution for this problem. In the >forum people write that they even bought a new player already since this>firmware upgrade made an end to their TX FM.>>Best Regards,>>Peter>>At 03:0 2.0.05 +000, you wrote:>>Dear Peter>>>>Based on the information you provided that you have verified the player>>>>on another computer with Windows 98. I would like to inform you that >the>>player and the updated firmware only support the below operating >system:>>>>Microsoft? Windows? 98SE/2000/Me/XP>>>>I understand that you are also using the player on a Windows XP >>computer. However, you might like to verify your player on another >>computer that meets the above mentioned minimum operating system. Do >let>>me know the result. >>>>If issue persists but when connecting your player directly to the >>computer the player is being recognized, format the player using the >FAT>>file system, and download and install the latest >>driver/firmware/application update available through the below link: >>>>(Note: All contents in the player will be removed when you format your
>>player, please backup the files) >>>>http://www.asia.creative.com/support/downloads/ >>>>. Insert your MuVo TX FM player into the USB port on your PC/Laptop, >>try a different USB port or hub if it is not detected. >>2. Open Windows Explorer. The player will be recognized as a Removable
>>Disk. >>3. Right-click on the player and choose Format. >>4. In the File system drop down menu, select FAT, and then click the >>Start button. Do not select FAT 32, though it is selected as default by>>>>Windows XP. >>>>After the formatting is complete, make sure that you stop your player >>before disconnecting it from your computer. (Please take note that stop>>>>your player before disconnecting it from your computer is a must. >>Otherwise it will cause damage to your player's memory >storage/Harddisk)>>>>>>To stop your player in Windows XP, Windows 2000 or Windows ME Click on
>>the Safely Remove Hardware icon on the Taskbar, click Safely remove USB>>>>mass Storage device, and disconnect your play when you are prompted to
>>do so. >>>>Make sure that the icon below appears on the LCD screen again for at >>least fi've seconds before disconnecting your player.>>>>Do let me know the result. >>>>In case if you need any clarification, please do not hesitate to >contact>>us. Thank you.>>>>Best Regards>>>><name removed>>>Technical Support>>Creative Labs Asia>>>>To provide feedback on your "Creative Experience" please click on the >>following link:>>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>>>========== >>DISCLAIMER >>========== >>This email and any attachments may contain private, confidential and >>privileged materials for the sole use of Creative's intended recipient
>>and is not to be forwarded or copied to others. Any review, copying or>>>>distribution of this email or any attachments by others is strictly >>prohibited. If you are not Creative's intended recipient, please >inform>>Creative immediately by responding to this email and thereafter >>permanently delete the original and any copies of this email together >>with any attachments. Thank you>>>>Original Message Follows:>>------------------------
Moderator note: Please remove the name of the advisor when posting up e-mails.
Message Edited by Catherina-CL on 0-3-2005 2:43 PM -
E71 firmware upgrade for A1 network - Nokia unable...
Hi,
Nokia, please make firmware v210 available to product code 0570359.
i have an E71, use it heavily in business and have standardized our company on it and need to upgrade it to v210 firmware, because the v100 is so buggy. i had 7 email interactions with nokia support and a1 support but both point the finger to each other and are of no help. so the last option is to use the forum, before i feel forced to switch my company over to the iPhone because of lack of nokia software support and upgrades.
the network provider A1.net says they have accepted firmware 200.21.118 already last year and informed Nokia in December 2008 to release v200 for this product code 0570359. A1 even says they have reconfirmed now again that the acceptance of the firmware has reached nokias support team. but when I check the nokia updater and the nokia website, it still says my firmware v100 is the latest. I know that even firmware v210 exists, know the list of fixed issues, so I actually want that one.
Is there anyone out there to help with this mess and help nokia from loosing even more business users over to the iPhone?
Bernd G.first of all, it isnt Nokias fault. once firmware is released, they do their very best to roll it out and usually achieve this in a few eeks to most regions for their generic product codes (i.e. firmware that is not operator-branded). in your case, there is some kind of miscommunication between your operator (A1) and Nokia, that has resulted in the delay of firmware released for your particular product code. Nokia simply provide the firmware to A1, who then decide whether to actually release it or not with their logos and whatnot all over it (i.e. operator customisation) or if they do not, they will not release the firmware to the users. so all you can do is haggle A1 about it and hope they hurry up and release the firmware.
another option is to ask the A1 guys to sign a release so that you can take your phone to your local Nokia Care Centre and have it flashed with generic firmware. although this is often unlikely to happen as customer service for operators usually do not know what users are talking about when you request this, or are too stubborn/lazy to allow it to happen. but nevertheless, you can try anyway and maybe something good can come out of all this.
If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post! -
Muvo TX FM 512MB: firmware upgrade failed. How to recov
Hi, I have a Muvo TX FM 52MB. The firmware version used to be .4.0x. I tried to upgrade it to the newest one, .7.04.
I did everything according to the Instructions on the Creative Download Website. I let the OS to choose the recovery driver for me. The firmware upgrade file correctedly found my player and executed the upgrade. However, there's no instruction that I should check the format data option during upgrade. So I didn't format the data during upgrade. After the upgrade, I couldn't start the player and the PC couldn't recognize it.
I tried to do the upgrade again. The PC correctly recognized the player as a recovery device. After I started the creative upgrade program, the program founds the recovery device, then started to find any device connected to the computer, finally said that "The device is not connected to the USB port".
How to solve it's Many thanks.
Alexgo to nomadworld.com and find the firmware... READ PROPERLY... it says that u must install a new driver before u upgrade the firmware... mine works... for now, to recover it, press and hold the play button on the player while connecting it and hold the button until a window appears to install the player recovery software... before that, install the new driver first. then let windows search for the driver. windows will clear everything up in ur player. NOW U CAN DO UR firmware update... it doesnt matter whether u want to format or not cause the firmware upgrade program will format your player even though u didnt want to do it. its not the formatting problem.. hope this hel
ps.
thanks for reading. -
Had a failed Firmware Upgrade on a Zen??? LOOK INSIDE FOR POSSIBLE
From the Nomadness.net forums: (I had the same problem and user inferno9 at those forums posted this which fixed my issues - hope it helps!)
The problem was that I had formatted the dri've and attempted to reload the firmware, when, BOOM, the firmware updates would not detect the player. I tried all kinds of different strategies, different drivers, different applications, safe mode, etc...until I FINALLY figured it out.
Buried deep within Microsoft's website, I found this link...
http://www.microsoft.com/windows/windowsmedia/player//readme.aspx#RollingbacktoapreviousversionofthePlay er
Quote:
Issues updating firmware on Creative ZEN portable devices after installing Windows Media Player
If you have a Creative ZEN device, make sure the device has the latest firmware before you install the beta release of Windows Media Player . To download the latest firmware, go to Creative Worldwide.
If you try to upgrade the firmware on your Creative ZEN after you install the beta release of Windows Media Player , the Creative firmware upgrade software might not recognize your device.
In this case, remove Windows Media Player , update the Creative firmware, and then reinstall Windows Media Player . Creative plans to address this issue in future firmware updates.
For information about removing the beta release of Windows Media Player , see Rolling back to a previous version of the Player.
Endquote:
Good luck all.EnsRegis wrote:I'd really love to see a firmware upgrade that gives the Zen Touch a color screen instead of a black-and-white screen. It can't be that hard to program, can it's If you made this, the Touch would be better than any other player on the market! It'd beat the iPod! <EM>Just kidding.</EM>
I think so -
Firmware upgrade failure with zen Vision M 30
Hi Guys, new to this and need some help as it has been a few days waiting on anything sensible to come from Creative support. History. Daughter got the new creative vision M 60gig and gave old (0 months) 30 gig to Dad Smiles all round. Dad (tech support manager) loads up system software and re formats the dri've. Finds new firmware upgrade so down loads and goes through the prosess of updating. Now up to this point, unit was working fine and was seen by win xp in the 'my computers list' but is new to my computer. Selected reload firmware which erased the old and told me to install the new. I ran the downloaded .exe file (latest) and it told me it could not find a device. Spent last night looking over the web for clues. Windows media play was listed but it turns out that it was only the beta that had an issue (in any event, it would not let me remove it as it wanted to do a roll back but could only find ver to roll back to). Sent out message to creative who cam back and told me to roll back wmp (great help) and to change the permissions for USB which I did. This then caused my computer to blue screen twice (had to re boot in safe and exit to recover). Ran registry mechanic and it fixed several things but still the unit is not seen by the upgrade program. When I boot the player up, it detects it has a firmware issue and puts me in the recovery mode screen. But nothing I do gets the upgrade to work. Any one got any ideas?
I have a similar problem. I tried to upgrade my firmware. So it erased the one that was on the player, and when i try to install the new one the computer says the device isn't plugged in, even though when i plug it in the pop up menu is displayed and it says DOcked on the player and the player is charging
-
WRT350N firmware upgrade not working
Hi, I've just been given an unused WRT350N router.
I've had a few problems getting it setup on my MAC (OSX 10.5.6), but it transpired they were problems using Firefox which were resolved when I started using Safari. However, I still have one outstanding problem with upgrading the firmware....
I want to upgrade the firmware from the original 2.0.10 to the latest available of 2.0.19. I have downloaded this from the Support page, which gives me a readme text file and a .IMG file which i presume is the firmware file (all instructions I have found imply it should be a .BIN file)
I have connected my router to the MAC using a wired connection and followed the firmware upgrade instructions (selecting the .IMG file), followed the rest steps (including using the hardware reset button, and the software factory defaults option), but when the router comes back up it still says its at firmware 2.0.10.
I get no error messages, and have noticed that at the end of the upgrade it does NOT display the "Upgrade is sucessful, rebooting.." message.
I have been through this several times with same results. Any ideas please ?
Thank in advance.
Solved!
Go to Solution.I have this same problem now with firmware for WAG54GS the zip file produces a .IMG file after running winzip
This file is not acceptable to the firmware upgrade as a .BIN file.
The firmware is expecting a .bin format. It does not like this .IMG file.
The documentation all refers to .bin.
Just renaming the file as .bin causes the linksys to abandon the upload.
I am on a Windows XP. .BIN is UNIX/LINUX terminology. Do I have to do the firmware upgrade on Linux?
Tried to get some software to checkout the .img file but nothing likes it.
WAG54GSv1-E1-AnnexB-ETSI-ML-1.01.05-code.img is what my winzip gets.
What am I supposed do with this file to get it into the right shape for the WAG54GS?
It wants .bin file not this?
Maybe you are looking for
-
Dear All, In our Scenario we are transfering the Inventory for the production (Daily) What ever is issued to perticular department(Warehouse). an from that warehouse items are issue for production. Example: Inventory Transfer: date Item X : transfer
-
Hi, How system copies pricing procedure from sales document to billing document
-
How are UI Elements Stored Within a View Controller
I want to develop understanding on how the UI Elements Stored Within a View Controller.
-
Correct CPU temp for a P4 3.06 with & w/out water cooling
What is the correct CPU temp for a P4 3.06? and also what should the temp show for a P4 3.06 running an Innovatek Water Cooling System Many thanks, Acinom
-
Music player not working in 7210 supernova
In Nokia 7210 supernova the music player is not working. It says "not enough memory" I have done all factory restores also but still not working...