Switch to a different menu template

This question was posted in response to the following article: http://help.adobe.com/en_US/premiereelements/using/WS09e4b3c48f3a79fc19b622510385d4355c-7e 00.html

I have used the content disc 4 and then also checked the update facility online. It says that I am up to date. I still have fewer menus. Only 2 wedding ones as opposed to 8 in PE 4.
I have PE 4 on one PC. PE 10 is a new install on a new PC.
I am afraid that I am no PC expert.
From your reply
If you installed via a download, and only got one file, you need to get the second, whick, IIRC, is a 7z "archived" file, and you will just Extract that, and install that additional material.
I am afraid that I do not understand the above. If I have tried to update I assume that I have everything for PE 10??
Also, do not Delete PrE 4.0 yet, as Adobe does change Menus, from time to time, and might delete some, and add others. Between PrE 4.0 and 10, the Menu Sets are the same format, PSD, so if you are missing some favorites, you can Copy those over, into the Library for PrE 10. If you need to do this, we can offer instructions, as there are a few things to consider, but it is simple.
You say the above is simple?? Where have I heard that before? I do not want to damage my new software installation!
Thanks for you interest!
Stan Williamson

Similar Messages

  • How can I get still photos to appear in menu templates?

    I can't get photos to appear in the menu templates in Premiere Elements 11, whether I drag them in or Browse them out. I tried two different templates, and 5 different photo file formats. From what I'm reading online, this is a known bug that has been around since v. 9. How is that possible that a major element of a top-of-the-line video editor doesn't even work? Is there a bug fix or a workaround?

    Hi ATR,
    Thank you for your kind response. Now that I’ve calmed down some, I’m willing to keep trying, to a point at least. I’ll try responding to your questions.
    I failed to mention that I did update to 12.1 before my last failure. And I still had the problem. So far, I have only deleted the Prefs file and not the entire folder, mostly because the program went into permanent crash mode and I couldn’t even get it to run, let alone try editing my project. That’s when I reinstalled it.
    The project is simply a PowerPoint presentation with a soundtrack, which I exported from PowerPoint as an mp4 file. It’s only 7:30 minutes long. So it’s a very tiny file. There is only one menu page and no scene menus.
    Yes, I have successfully burned it to disk, once with the gray rectangle on the menu (to confirm whether it would show as a gray rectangle on the TV screen, which it did), and once with the picture on the menu, the one time I succeeded in getting the picture to appear in the menu.
    I have tried the picture in multiple image formats, but the one I mainly try is a .bmp that PE generated using the snapshot tool, or whatever it’s called in PE. I figured if PE won’t even load images it created, the Adobe programmers need to start back with square one.

  • Trying to edit on Encores provided Menu templates. Error message PhotoShop File-1 and Sorry, Abnormal Condition has been Detected

    I've had Encore CS5 for 1 1/2 years and have only used it twice. This third time, I started getting an error message when I try to edit on one of the menu templates provided by Encore. First message is PhotoShop File-1 and then "Sorry, Abnormal Condition has been detected. You have one chance to save your work (use a different file name to save it under)
    I don't own PhotoShop and have only JUST NOW installed an elements version. I use a MAC with OS X 10.9.5. I have never had a virus or any other issues using Adobe products, including my Premiere CS5. Even when I bring in my own menu artwork, I still receive the same error messages. I tried updating Encore. I am at a loss.@

    One of the first issues we saw here with Mavericks. Appeared to be more of an issue with Encore 5.0 and 5.1 than 6. But I believed users found a way to fix this. We did not get enough reports back.
    Google Encore Mavericks
    Some users reports the following fixes their problems:
    http://forums.adobe.com/message/6109315#6109315

  • UNEXPECTED RESET...I'M LISTENING AND ONLY ONE SONG GOES OUT AND STARTS IN DIFFERENT MENU

    UNEXPECTED RESET.
    I'M LISTENING  MY MUSIC . BUT  MY IPOD GOES OUT AND STARTS IN DIFFERENT MENU

    Hello LUISPOLAR11,
    It sounds like your iPod classic is playing one song but then stops and appears to go to a different menu. I would start by resetting it:
    Reset your iPod - Apple Support
    Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
    Press and hold the Menu and Center (Select) buttons simultaneously until the Apple logo appears (about 6 to 8 seconds). You might need to repeat this step.
    If you have difficulty resetting your iPod, set it on a flat surface. Make sure the finger pressing the Select button is not touching any part of the click wheel. Also, make sure that you are pressing the Menu button toward the outside of the click wheel, and not near the center.
    If the above steps didn't work, try connecting your iPod to a power adapter. Then, plug the power adapter into an electrical outlet, or connect your iPod to your computer. Make sure that the computer is turned on and isn't set to go to sleep. Try resetting your iPod while it is connected to power.
    If the issue persits, I would restore your iPod with iTunes and re sync your data to it:
    Restoring iPod to factory settings
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Final Cut Pro 7.0 nd Menu templates

    Currently, I am looking to upgrade to FCP 7.0 via FC Studio Pro 3, and I am wondering about the menus templates/markers that are claimed to be available in FCP 7.0. Ultimately, I would be looking to try and generate a Blu-Ray disk by outputting in FCP. The web site has some info on the menu templates, however, is possible to have two separate menus one linking to the other? My DVD disks traditionally have two separate menus (one for each separate event) on the same Blu-ray disk. Currently, I can do this in DVD Studio Pro 3.0.,and have the ability to nest up to 99 separate menus/disk.
    I am aware of the lack of support for Blu-ray disk authoring in in DVD Studio Pro 4.0 andI was wondering if the Blu-ray encoding and available menu templates in FCP 7.0 would allow me to do this.
    Toast Titanium allows separate menus (one per each clip), however, they all have the same background and title as the first and there is no way of changing this.
    Does anyone know or has already tried working with the FCP 7.0 and Blu-ray disk menus?

    Did you convert the footage to ProRes?
    You know, FCP 7 isn't supported on Yosemite. In fact, it wasn't supported on the previous OS either...Mavericks. And running old, end of line apps (discontinued 3.5 years ago) on unsupported OS versions means they won't be stable...because Apple not longer makes sure that FCP 7 will work...it's moved on to FCX. 
    And Apple is also moving away from Quicktime, and moving towards AV Foundation. The core of FCP 7 is Quicktime.  Mavericks no longer runs Quicktime 7, and that was a fully featured app. Quicktime X is unfinished, and very stripped down. It cannot open all codecs of MOV files...it converts ones it doesn't recognize to H.264 or ProRes and then opens them.  So one BIG issue is that the main core of FCP is missing, and what is there is a very stripped down, unfinished piece of software...that Apple is also phasing out. 
    My advice is if you want to continue using old software, you need to run it on the OS that supports it. THis is true of any software....be especially so if you are earning a living with it.  If you can't do that, then looking to the future and looking at supported editing apps might be in order. If FCX isn't your thing, there's Adobe Premiere Pro, Avid Media Composer...

  • When syncing multiple Google calendars to iPad, switching event to different calendar on iPad creates a duplicate in Google. Ideas?

    When syncing multiple Google calendars to iPad, switching event to different Google sub-calendar using iPad creates a duplicate in Google.
    Using Google account with the Exchange setup on an iPad mini. iOS up to date. I have a secondary calendar in my Google account for some appointments, and when I create the event on the iPad and it defaults to my main Google calendar, changing the event to the secondary calendar caused the following:
    1) at first, the event totally disappeared from my iPad. Scary! Reappeared when I went into Gcal on the web, opened the event to edit, and re-saved. Phew.
    2) Failing to re-create error #1, I switched a new event from primary to secondary calendar, and it then appears correct on iPad, but is duplicated on the web. The duplicate remains even after deleting the changed event on iPad, refreshing Gcal, etc.
    Just curious if anyone else is having this problem or has discovered a workaround or fix.

    When you open the Calendar app, tap the button at the top-left corner (Calendars).  That should reveal all the calendars you have available, and you can select/ un-select any or all of them.
    If you don't see your 2nd GMail calendar listed, go into Settings/ Mail/ (account name) and make sure you've turned the calendar ON for this account.

  • Problems with customising menu template backgrounds

    Hi.
    I am experiencing problems with changing the background of the included disc menu templates in PE9. I can change the background image to anything i like on the computer and all seems to work OK but when i burn the project to disc (PAL_Dolby DVD) the custom background image has gone and been replace with the default template imagine.
    Anyone got any ideas whats going on!
    Thanks

    This issue showed up with PrE 9. I do not recall reading of it with earlier versions.
    I do not know if the PSD files have some corruption, or if some change in PrE 9's code "did the deed," but many have filed a Bug Report, and I ask that you please do, as well. It should be an easy fix for Adobe (but I am not a coder, or software engineer, and could be wrong).
    Good luck to us all,
    Hunt

  • I just updated my iphone to 5 and it switched to a different language. how do you change it back to English

    i just updated my iphone to 5 and it switched to a different language. how do you change it back to English

    Go to:
    Settings (gear icon)
    Scroll to General (gear icon) (Third option box from top)
    Scroll all the way down > Select Third option from bottom (international)
    Select first option (language)
    Select English
    Select Done

  • Drop Zones in DVDSP menu templates

    I like to occasionally use the menu templates that come with DVDSP. One thing that frustrates me is the quality of the playback video in the Drop Zone of the template. The image has a somewhat jagged/blocky look to it. It is not as smooth and clear as the original m2v file. Is this an encoding problem? What can I do to correct this situation.
    The original work is done in FCP5 and then encoded to m2v using the Quicktime Conversion options. I usually chose the settings for a 6 bit target rate with a 7 max, one time VBR, and "Better" motion detection.

    What David said - any footage on a menu that includes other shapes or items from the palette will get encoded to MPEG2. If you have already used MPEG2 as the source footage then DVDSP will pass it through another enocde process, and you will lose quality... your best bet therefore is to use .mov files in this case.

  • I want to downgrade. What versions are available. Or else I will switch to a different browser.

    My university IT staff and software programmers can not keep up with new Firefox versions. The last one that is compatible is 7.0. I can not find a link for a downgrade to that version. The latest versions do not work with any of their PeopleSoft software and I am forced to use IE. If I can not downgrade, I will have to switch to a different browser. this is ridiculous!

    Thanks for the replies. Matt says there are advantages to running the newest version, but I fail to find what they are. New versions are coming way too fast and from what I've learned, our university software will NOT be compatible with any version after 7.0 in the foreseeable future. Since all software programming is farmed out another company, doubtful they will want to use cor-el's suggestion of using 10.0 ERS, whatever that is.
    My questions is still the same...where can I find a link to downgrade to 7.0. I can not find any supported earlier versions with a working link. Will I have to go down to 3.6? Even if I have to do that, I still could not find a working link.

  • I need to switch to a different computer to synch my iphone.  Will I lose information?

    I need to switch to a different computer to synch my iphone.  Will I lose information?

    To gdgmacguy:
    You can authorize the computer! Top left corner, you wil see file, edit etc. Click sotre> authorize this computer, than go to edit> prefrences> devices, under back-ups click where it says to prevent auto sync when devices is connected. than you can connect the device, and theoreticall you could transfer purchases by right clicking on the name of the phone, and back up by the same method.

  • Why did apple switch to a different design other than the outer band dual antenna design in the iphone5 ?

    This is a subject i'm not to familiar with but i do know a little about antenna design.
    I was wondering what caused apple to switch to a different design (did they?). What research caused this change ?
    Thanks,
    David
    ps: was also wondering what the difference in signal stregnth was between the two designs ?
    thanks again!

    <http://www.macrumors.com/2012/09/12/the-iphone-5-should-again-deliver-an-improve d-antenna/>

  • Seamless playback within the same song, while switching to a different playlist

    Sometimes I search for new music, start playing the top songs of an artist I don't know yet. And when I find a great track I would like to continue listening to it in the order of her album. Of course, I could add the album's tracks to my queue, but it would be so much easier, if I could simply click on the play-button of that same song and it keeps playing seamlessly. That way you could jump between playlists, top songs, albums etc. (as long as they share a song) without any interruption and without having to add and delete songs to your queue. I think that would be rather intuitive anyhow, but to make it extra easy to understand, a variation of the speaker symbol could be displayed with the song playing in every other place of Spotify.

    Hi Marco, exactly. But other than by adding those tracks to the queue in my vision, the list of tracks changes every time I switch into a different list... hmm, hard to explain. Maybe it's easier with an example: 1. When I click on the top track of the artist alt-J, my queue looks like this:– Left Hand Free– Every Other Freckle– Breezeblocks– Hunger Of The Pine– Warm Foothills– Nara– Fitzpleasure– and so on... 2. When the track "Breezeblocks" is playing I am hooked and say "Cool, let me listen to the album from that point on". I switch to the album and then click on the playing song "Breezeblocks". My queue then looks like this:– Breezeblocks– (Guitar)– Something Good– and so on... until the end of the album 3. When the track "Something Good" is playing I find that this song is the wave I want to ride and search for a playlist with that song, so I click on "alt-J Something Good" by one Amanda McGlaughlin and my queue changes to this:– Something Good– Just A Girl– Shimmer - Single Version– Float On– and so on... So, instead of having to switch to my queue and delete the tracks I now don't want to listen to anymore (the ones from the album) and instead of having to listen to ALL of the songs of the artist after my added songs are played through, I have a simple one-click-control of what is playing next – always according to my current mood and without any interruption (could be a cool way to sonicate a party as well). I hope that makes it more clear. If not, please let me know. Best regardsAlexander  

  • Facetime Video stops when switching to a different space / desktop

    Using facetime, if i switch to a different desktop the video pauses.  How do I stop that?  Strangely, I don't have the option in the dock to "Assign to all desktops" like I do for pretty much every other app.  This disappearing seems to have happened in Mountain Lion according to what a friend sees on his machine.  Anybody have any ideas or is this a bug?

    Perhaps you have too many windows open. When you are browsing, a lot of desktop memory is used to switch between windows and links, and the toolbar memory. If you are done on the web,close the window. Also try the yellow button to minimise the window to the dock.Open the windows on your screen by using the dock icon. I'm new to Tiger, but have noticed that on my G3, it seems to take a moment to park the window, before opening the next when clicked to activate.Stickies got under my skin on OS 9, so I kept them turned off. Check your preferences. Perhaps they may be set to pop up periodically, or daily if you have worked past midnight.For the Finder window, If you have first opened the finder and left the window open, remember that the Mac Finder operates the desktop. Because of the 'hot zone' around your curser, you may be clicking on the hairline of desktop around the window, actvating the desktop, will give priority to the finder window, and the stickie window. If your Mac is new, call apple (during the workday ). Your Mac has a full year of Apple care included.

  • Dump when switching to a different variant

    Hi all,
    I am a freshman for FPM, and currently I have met a issue when using it.
    You know I want to switch to a different variant, but when I click the switch button, dump occurs:
    Dump Info----
    Note
    The followin error text was processed in SD7 the systm: Access via 'NULL' object reference not possible.
    The error occurred on the application server ldai1sd7_SD7_89 and in the work process. 9
    The termination type was: RABAX_STATE
    The ABAP call hierarchy was:
    Method: WDDOMODIFYVIEW of program /1BCWDY/0AMWTCDY1FMANSV9U38B==CP
    Method: IF_WDR_VIEW_DELEGATE~WD_DO_MODIFY_VIEW of program /1BCWDY/0AMWTCDY1FMANSV9U38B==CP
    Method: DO_MODIFY_VIEW of program CL_WDR_DELEGATING_VIEW========CP
    Method: MODIFY_VIEW of program CL_WDR_VIEW===================CP
    Method: DO_MODIFY_VIEW of program CL_WDR_CLIENT_COMPONENT=======CP
    Method: DO_MODIFY_VIEW of program CL_WDR_WINDOW_PHASE_MODEL=====CP
    Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
    Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
    Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
    Method: IF_WDR_RUNTIME~EXECUTE of program CL_WDR_MAIN_TASK==============CP
    It ever worked fine before, and I have never changed my codes these days. Moreover, in some other development system
    with old versions, the same codes can also work without any dump.
    Has anyone met similar problems? I will appreciate your kindly help for any suggestions on this issue.
    Thanks.

    Hi Arvind,
    Thank you for your reply.
    In fact my codes also works in the other system, but just in the current system, the dump occurs suddenly these days.
    It ever worked normally before.
    Here is the debugging information:
    ST22  INFO----
      15 METHOD       /1BCWDY/0AMWTCDY1FMANSV9U38B==CP    /1BCWDY/B_0AMWTCDY1FMANSX1NNAA       1545
         CL_CNR_VIEW_CTR=>WDDOMODIFYVIEW
         Web Dynpro Component          FPM_GAF_COMPONENT
         Controller                    CNR_VIEW
      14 METHOD       /1BCWDY/0AMWTCDY1FMANSV9U38B==CP    /1BCWDY/B_0AMWTCDY1FMANSX1NNAA        180
         CLF_CNR_VIEW_CTR=>IF_WDR_VIEW_DELEGATE~WD_DO_MODIFY_VIEW
         Web Dynpro Component          FPM_GAF_COMPONENT
         Controller                    CNR_VIEW
      13 METHOD       CL_WDR_DELEGATING_VIEW========CP    CL_WDR_DELEGATING_VIEW========CM004     7
         CL_WDR_DELEGATING_VIEW=>DO_MODIFY_VIEW
      12 METHOD       CL_WDR_VIEW===================CP    CL_WDR_VIEW===================CM002     7
         CL_WDR_VIEW=>MODIFY_VIEW
      11 METHOD       CL_WDR_CLIENT_COMPONENT=======CP    CL_WDR_CLIENT_COMPONENT=======CM00T    15
         CL_WDR_CLIENT_COMPONENT=>DO_MODIFY_VIEW
      10 METHOD       CL_WDR_WINDOW_PHASE_MODEL=====CP    CL_WDR_WINDOW_PHASE_MODEL=====CM00F    24
         CL_WDR_WINDOW_PHASE_MODEL=>DO_MODIFY_VIEW
       9 METHOD       CL_WDR_WINDOW_PHASE_MODEL=====CP    CL_WDR_WINDOW_PHASE_MODEL=====CM002   112
         CL_WDR_WINDOW_PHASE_MODEL=>PROCESS_REQUEST
       8 METHOD       CL_WDR_WINDOW=================CP    CL_WDR_WINDOW=================CM00V    12
         CL_WDR_WINDOW=>PROCESS_REQUEST
       7 METHOD       CL_WDR_MAIN_TASK==============CP    CL_WDR_MAIN_TASK==============CM00I    76
         CL_WDR_MAIN_TASK=>EXECUTE
        6 METHOD       CL_WDR_MAIN_TASK==============CP    CL_WDR_MAIN_TASK==============CM00U     6
          CL_WDR_MAIN_TASK=>IF_WDR_RUNTIME~EXECUTE
        5 METHOD       CL_WDR_CLIENT_ABSTRACT_HTTP===CP    CL_WDR_CLIENT_ABSTRACT_HTTP===CM019   100
          CL_WDR_CLIENT_ABSTRACT_HTTP=>HANDLE_REQUEST
        4 METHOD       CL_WDR_MAIN_TASK==============CP    CL_WDR_MAIN_TASK==============CM00J    95
          CL_WDR_MAIN_TASK=>IF_HTTP_EXTENSION~HANDLE_REQUEST
        3 METHOD       CL_HTTP_SERVER================CP    CL_HTTP_SERVER================CM01B   388
          CL_HTTP_SERVER=>EXECUTE_REQUEST_FROM_MEMORY
        2 FUNCTION     SAPLHTTP_RUNTIME                    LHTTP_RUNTIMEU02                     1155
          HTTP_DISPATCH_REQUEST
        1 MODULE (PBO) SAPMHTTP                            SAPMHTTP                               13
          %_HTTP_START
    Chosen variables
    Name
        Val.
    No.      15 Ty.          METHOD
    Name  CL_CNR_VIEW_CTR=>WDDOMODIFYVIEW
    FIRST_TIME
        2
        0
        0
        0
        2000
    VIEW
        D0002000
        3000C400
        D30000002C040000
    LV_TMP_ROP_ID
        FPM1
        4543
        60D1
        0000
        0000
        460050004D003100
    ROAD_MAP_STEP
        F0000000
        F0000000
        FF00000000000000
    %_DUMMY$$
        2222
        0000
        0000
        0000
        2000200020002000
    SY-REPID
        /1BCWDY/0AMWTCDY1FMANSV9U38B==CP
        2344545234455445344445535334334522222222
        F123749F01D7434916D1E3695382DD3000000000
    Is it enough for your analysis?
    Thank you very much ~~
    Best Regards,
    Alex

Maybe you are looking for