Switch To Manaul Assignment / Delete Assignment in cProjects

Hi Experts
I'm looking for the function module that runs in the back end that switches the cProject to Manual assignment in the Accounting tab, and the function module that deletes the assignment in the back end.
If it is a block of code, could you please then tell me where it sits?
Thank you in advance
Johan Kriek

Hi,
The ZUONR is filled by the Sort key in the account's master data. This sort key is defined in the OB16.
And check the path below: Accounts Receivable and Accounts Payable --> Customer Accounts --> Line Items --> Display Line Items --> Display Line Items without ALV.
JPA

Similar Messages

"Server either does not have a virtual switch configured or none of the configured virtual switches have an IP address assigned" error driving me nuts!

OK; have been trying to setup a test VM based RDS deployment for a few days now with no luck.
this error mentioned above:
"Server <server name> either does not have a virtual switch configured or none of the configured virtual switches have an IP address assigned" error is driving me nuts!
I have removed and re-added the RD Virtualization Host role numerous times, each time having the "create a virtual switch" checkbox selected, but it did NOT create any virtual switch.
I created the external virtual switch manually and tried to create the desktop collection again, no luck with the same error.
a few questions:
1. you don't assign IP to a switch! you assign IP to Network Interfaces. why does the error puts it like this?! it is technically wrong.(yeah yeah I know all about how you'd assign IP to managed switches in real world to telnet into them and manage them.
you know better than me that it is not the case here!)
2.the RDS Virtualization hosts are using their wifi card as the card for the virtual switch. could that be the reason? I even disabled their unplugged wired NIC just to make sure that the wifi is the only available option for the RDS wizard to use for the
virtual switch creation; but it didn't use it and it didn't create any virtual switch automatically.
3.if WIFI nic is indeed the reason, is it your suspension or an official documents is there somewhere stating so (that the WIFI NICS on a Virtualization hosts are not supported as the hub for a virtual switch).
4.what are the properties of the virtual switch the RDS requires? does it have to be external? why can't it work even with my manually created external switch?
5.how would I fix it?
P.S: the environment is made up of 2 laptops, having windows 2012 R2 trial installed on them, using their wifi to connect to the out world. no cable is plugged into their wired NIC card.

Hi,
Thank you for posting in Windows Server Forum.
The simplest short term solution was to connect each computer to a small switch that had no other connectivity. This brought up the link light on the external NIC and allowed the creation of the collection to complete. You need to use an external switch. You
can create one external switch which might fix the problem.
Please check below article for information.
VDI Deployment Error About Virtual Switch
In addition please referthis article for information regarding virtual switch.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Function to Delete assignment of HU from outbound delivery in VL02n

Hi,
in my scenario the objective is delete assignment from the delivery and not cancel the HU.
Using the functions
HU_GET_HUS
V51P_DELETE_RELATIONSHIP
HU_POST
I can delete assignmento of the HU from the delivery but when I want to cancel the delivery into VL02n and return tells me that this is not possible because there are still HU attributed to the delivery.
There are alternatives to these functions, or to accidentally enter data into these in order to solve the problem?
Thanks

Hemanth,
I recall that we used to update the HU status as well when we dissociated HU from delivery, though can't remember the reason now.
Pls check the VEKP-STATUS for HU after you have done with these 3 FM calls, I believe you have to update the status to 'BLANK' with the help of some FM, try it first if it works for you by direct updating it in table in Dev.
BR,
Diwakar

What is difference btw project Assignment, Resource Assignment and task Assignment.

Hi,
I am new project accounting Module .
what is difference btw project Assignment, Resource Assignment and task Assignment.

Project Assignment, Resource Assignment refers to the resource management part and Task assignment is basically the work assignment to the resource.
An assignment/requirement is created in PJR for create demand for the resource requirement of the project and when the resource is aligned he can be assigned to the task in the work plan.
Refers to the top down approach in this case.
Additionally a resource can be assigned to the work plan and a assignment can be created to get the resource allocated to the project.
Refers to the bottom up approach in this case

Hi, i wanted to resize my windows partion. I was thinking of using the default backup system for windows. Then switching to mac partion, deleting the bootcamp and then restoring a new enlarged partion from the backup. Is this possible?

hi,
i wanted to resize my windows partition. I was thinking of using the default backup system for windows. Then switching to mac partion, deleting the bootcamp and then restoring a new enlarged partition from the backup. Is this possible?

I see youhave gotten recommendatons for using WinClone or CampTune. I have used both and they both work well.
You have asked about using the WIndows 7 utility to backup your drive and restor it onto a larger partition. I will tell you fro experience that this will probably not do what you want, and may do something that you don't want. You can use the Windows 7 native backup tool to make a backup of your Windows 7 partition. It will most liekly end-up making a dive image of the whole drive. When yourestore that backup, it will try to re-create teh partitions of exactly the same size as they were when the backup was taken, so it won't increase your partition size for you. Worse, since Windows doesn't natively know how to read./write HFS+ volumes, the backup will make a partition for your MacOS (replacing any you may have now), except that the copy restored by WIndows will be totally worthless, and you will not be able to boot MacOS from it, or even read it under MacOS.
Now I will tell you that I've also had some fairly good success working with the free tool CloneZilla. Since it hasn't been mentioned yet, and everything else mentioned does cost you money, I thought I would throw it out. CloneZilla is not as easy to use as the tools mentioned, but it has worked for me int hte past, so it is something to consider. I tend to use CampTune myself, but that was because I purchased a bundle deal for them and it was included in that deal.

I am unable to assign ledger assignment....

hi,
my name is Rajesh, i am doing new ledger concept while i can't see new entry button in ledger assignment for assign non leading ledgers for leading ledger(0L).
Regard,
v.rajesh

Hello,
1. make customizing for ledger group
make entry for a ledger group and then assign ledgers to the leger group
press New Entries then enter group name and description. as you can see below.
then mark this entry and go to ledger assignment
then enter the ledgers for you ledger group
ledger group is ready.
2. Making posting in ledger group - run TCd FB50L and enter ledger group as you can see below.
all the best erwin
Posting in ledger group

How do you switch to streaming without deleting synched photos in AppleTV?

I have synced my photos onto my AppleTV and use them as my screen saver. I'd like to keep these photos on my Apple TV and also use the stream function to listen to my music playlists and movies. When I switch the option to streaming everything is deleted from my Apple TV, including the photos that I use as the screensaver. How do you switch to streaming without deleting synched photos in the Apple TV?

Firstly, the ctrl-click option says turn of syncing not turn on streaming, but I'm not at all sure this is really what you want to do.
In itunes, select the tv from the device list, then in the main part of the iTunes window select the summary tab and ensure you have custom sync enabled and that 'show only synced items' is unchecked.
Click sync from the bottom RH corner, your tv should now see all the content in itunes provided it is checked. See This.
Now you can work your way through all the tabs in the main window and select/deselect any content you want/don't want to sync.

Assigning Role Assigner Permission

Hi,
I've been going through the Enterprise Portal APIs for a way to assign Role Assigner Permission on a Role to a User, but i haven't been able to find one.
Can someone please guide me on how to do it?
Thanks,
Mayank

Thanks Michael,
I tried with the following code:
initPcdCtx = new InitialContext(env);
initPcdCtx = BRUtil.GetPCDContext(csc.Persistence);
IPcdContext myPcdContext =(IPcdContext)
                         initPcdCtx.lookup(Role); // Loading the context with the Role
IAclHandle myHandle = myPcdContext.getAclHandle();
IAcl ownAcl = myHandle.getOwnAcl();
if (ownAcl == null)
     msg = "Currently no ACL - attempting to create it";
     myHandle.createAcl(LoginID,myHandle.getParentAclHandle().getOwnAcl());
     ownAcl = myHandle.getOwnAcl();
ownAcl.createAclEntry(LoginID, Role, "allow");
But it's failing in the createAcl statement. I get a java.lang.ClassCastException.
If I load the myPcdContext object with the user loginID instead of the role, then I get an exception saying "Child not found" .
Am I missing something here? Thanks for all your help.
- Mayank

Assign statement - Assign program field to field symbol

Hi,
System R/3 470
I have used the Assign statement to read variables from another program, in the current system. and everything works as expected.
I now want to read a button that is pressed from the Workflow inbox.
However when I try and read the value from the calling program SAPLSIW1 field L_FUNCTION, I get an error field symbols is not assigned
      ASSIGN '(SAPLSIW1)l_function' TO <fs_func_gl>.
      ASSIGN (<fs_func_gl>) TO <fs_func_lc>.
      IF <fs_func_lc> IS ASSIGNED.
        lwa_func = <fs_func_lc>.
      ENDIF.
I can see all the programs in the call stacks and if I navigate to the program I can see the value fro field l_fucntion
Any help will be appreciated
Thanks
J-J

Hello,
1. From your code snippet i understand that you've not use ALL CAPS in your ASSIGN command
ASSIGN '(SAPLSIW1)L_FUNCTION' TO <fs_func_gl>.
2. As mentioned by Naimesh check the "Call Stack" in debugger & see what are the fields available. If the particular field is not in the "Call Stack" you can't ASSIGN it!
BR,
Suhas

Delete assignment of HU from outbound delivery (VL02N) not working

Hi All
I have searched many threads to find the solution to be above problem but none of them was working for me, so posting the query again.
I hava a dummy pick HU that I create for some purpose, finally i want to delete the assignment of the HU in the outbound delivery.(not to delete the HU completely). For me, the assignment of the HU vanishes from outbound delivery with 3 FM's. 'HU_GET_HUS' , 'V51P_DELETE_RELATIONSHIP' and 'HU_POST'.
The problem is, when i PGI the delivery, the HU appears again in VL03N. I am not able to understand this strange behavior.
I have tried all FM's like bapi_hu_delete etc, but they delete teh HU completely which is not my req. I heard abt this FM BAPI_HU_DELETE_FROM_DEL, but am workng in Ecc 5.0 and the FM doesnt exist.
Pls help
Thanks

Hemanth,
I recall that we used to update the HU status as well when we dissociated HU from delivery, though can't remember the reason now.
Pls check the VEKP-STATUS for HU after you have done with these 3 FM calls, I believe you have to update the status to 'BLANK' with the help of some FM, try it first if it works for you by direct updating it in table in Dev.
BR,
Diwakar

Delete Assignment of Sales Order to Service Notification

Hi,
I would like to delete the assignment of a sales order to a service notification (not delete the sales order itself). Can this be done without development?
For the assignment of a service order to a service notification, this deletion is possible via the dropdown menu in the service notification.
When I look at the business processes for system/user status, I do see a business process "Cancel sales order assignment". I tried to trigger it using a user status but that trick does not seem to work.
With regards,
Dan

Hello,
I solved this creating a new activity in the action box, assigning Business transaction "PMMC - Cancel sale order assignment" and leaving function module blank. It resets the system status "SOAS - Sales Order Assigned".
To do something better, it would be useful to write a custom FM that clears possible fields containing the relationship (such as QMEL-VBELN).
Best regards,
Andrea

How to unassign(delete assign) Organization Unit to User?

How to <b>Unassign Organization Unit to User</b>? Is there any furnction module to do this ? <b>What are the function modules to update org unit of the user & to update the attributes of the user</b>? Update org unit means we have to delete & recreate org unit or else directly to update org unit of User any function module existed? Please help me out asap. Thanks in advance.
Thanks & Regards,
Nagaraju Maddi

Hi Cardo,
I am developing a function module. In that one I have to write the code for the below case.
Suppose user was assigned to 'XYZ' organization unit. Now I want to change his organization unit as 'ABC'. How to handle this programetically? Later I have to update that user attributes. I think now u understand my requirement. Please help me out.
Regards,
Nagaraju Maddi

Delete assigned material to an equipment

Hi,
   we assigned a material and serial number to an equipment (material and serial number fileds on serial data tab of IE02 transaction). Now we want to delete this assignation because we made a mistake (it was not the right equipment). We tried to use the path menu "IE02 Transaction -> Edit -> Special serial number functions -> Change material number", but we only can change material number, it is not possible delete it.
   Does anyone know how can we delete it?
   Thanks in advance.

Hi,
I donu2019t think you can delete this assignment but you can create a dummy material with dummy serial number and change this information on the equipment; if the equipment is not in use you can archive the equipment
Regards
Carlos

Deleting Assignment Block dynamically as per requirement

Hi All
I need to hide a assignment block (added it to overbiew page view area and component usage used) dynamically based on some condition.
I have redefined DEATTACH_STATIC_OVW_VIESETS and added the view to deattach
, but still that view internal table contains the deleted view in REATTACH_OVW_VIEWSETS so I have removed there also but still some where that internal table picking up that view and showing in screen.
Can any body please guide me

Hi,
this may be useful:
http://wiki.sdn.sap.com/wiki/display/CRM/Dynamcallyhidinganassignmentblock
Regards
Ajay

Delete assignment of work approval document to Maintenance Order

Hello Experts,
In wcm(enhanced model), I have created and assigned one work approval to Maintenance order.
Now I am not able to delete the assignment to the maintenance order. I have checked both the cases when work approval is set as prepared and also when it is not set as prepared.
Is there any possibility..
Thanks

Hello Experts,
The requirement here is - whether we can extend the validity of a work approval document after setting to status 'Prepared'. WAP is assigned to a maintenance order.
Thanks for your input on this.

Switch To Manaul Assignment / Delete Assignment in cProjects

Similar Messages

Maybe you are looking for