Switch until release using keyboard...need urgent help

Hi,
i have a problem of configuring "switch until release" action using keyboard....
or is it there no this function at all...
it seems like all i can do is press to ON and press again to OFF
anyone can help...
need Urgent help....
thank you in advance..

This isn't possible because of the way operating systems
handle keyboard events. When you press a keyboard key, it does not register as
one key down. For whatever your operating system is set for as far as repeating
characters, it will register that many key down presses. The mouse works
differently, when you press the mouse it keeps that event "locked"
until you release the mouse. Because of this, you can not make a switch until
release using the keyboard; this definition is only for mouse clicks.
Brandon Vasquez | Software Engineer | Integration Services | National Instruments

Similar Messages

Boolean switch until released using an event structure

I am using a boolean control with the mechanical action set to switch until released, I want the button to go back to the original state.
I am using it in an event structure set to trigger on a value change. The action of pushing the button is generating two events, one of the on state and one for when it returns to the off state.
How do I control this so that only one event is triggered and the second event that is queued up is ignored, I would like the button to go back to the original state and not execute code twice.
Thanks
Jim
Solved!
Go to Solution.

You can use the value from OldVal or NewVal in the event case and a conditional structure to mask it off. Do you really need switch until released functionality? That's intended to give you two events, as the click and release are different actions. Switch when released might be a better fit for you if you only want one event.
--Using LV8.2, 8.6, 2009, 2012--

Switching from PC to Mac - need urgent help!

This question has been asked before, more or less, but I'm going to ask it again, because my version is more - me specific.
Upgrading from PC (windows) to Mac (...). I have CS5.0 (photoshop, illustrator, indesign, acrobat, bridge) Student and Teacher edition for windows.
As far as I can tell, it is not possible to simply switch my PC license to a Mac license - even when I DON'T want to be using CS5 on both the PC and Mac. Meaning, I ONLY will be using CS5 on the Mac.
Is this correct?
Presuming the above statement is correct, how much is an upgrade from CS5 Windows to CS.5 Mac? How much of a hassle is it?
And, how different is CS5.5 from CS5.0, as in, features and "looks" wise? Is it fully compatable with the intuos4? And will PhotoshopCafe tutorials for CS5 still be relevant?
One last question. Is running Photoshop through Parallels 7 a pliable option? From the research I've done, it doesn't sound like it (ie. lag and no full access to full RAM power), but I would appreciate verification from personal experience.
Thank you in advance, and I apologise for the mass of questions.

Then really for me upgrading would be a waste of money. I really only use PS and AI, and Bridge obviously. And from what I read about what they upgraded, it would be a waste for me. I'm not commercial yet! lol
Thank you very much for your help. I think now I will continue looking deeper into running CS5 via Parallels. My only concern is that it apparently runs slower (which makes sense). However I read somewhere that setting up the VM on a seperate partition on the HDD helps? Or even running Bootcamp through the VM.
Do you know anything about this? I've set up seperate drive partitions on Windows before, so that is not a concern to me.

Using LOOKUPVALUE--need urgent help please

Hello,
what im trying to do is grab the first date when someone bought a product. I have 2 tables. 1 where my products are registered with product ID and the other table shows when the item was bought. What im trying to do is show in the first table only the date
where item was first bought. Im using lookupvalue and gives me an error because I have repeated itemsID in the dates list.
How could I only grab the first date??
Thank you

Power Pivot Pro and
"The Italians" have been the richest sources for me.
What that measure does is find the smallest value in your fact table - MIN( ... ), but this function is evaluated in a special context.
CALCULATE() allows us to change the context that we evaluate a function in. What we're doing is changing the context so that we evaluate MIN() only on the rows in the table specified by FILTER().
FILTER() takes a table, and then iterates row-by-row over that table, performing the logical test that we specify. It returns only those rows that have a true value for that test. The test is checking that the [itemsID] on the current row (current row in
our iteration using FILTER()) is equal to the [itemsID] from the row of the product dimension that this whole expression (CALCULATE( MIN(...), FILTER(...))) is being evaluated for. EARLIER() says, "I know my current row refers to the current row in my
iteration through FILTER(), but there is also a current row in the table where this calculated column is defined - give me the latter meaning of current row."

Need Urgent Help in PM8M-V H problem - keyboard freeze

Hi everyone,
I'm a newbie in this forum and I really need urgent help with my motherboard.
My PC specification:
Intel Pentium 4 2.4GHz
MSI PM8M-V H W7104VMS v3.4 022206 14:32:17
1GB(512MB x 2) Kingston PC3200 400MHz
Seagate SATA II 320GB ST3320620SV (set with jumper to support SATA I)
Power Color ATI Radeon 9550 256MB
Lite-On DVDRW SHM-165P6S
USB mouse, PS/2 Keyboard
I really appreciate if anyone can help to guide me in solving my problem. My keyboard tends to freeze at the part where it says "Press any key to boot from CD". This limits me to do anything until I'm totally loaded into Windows. Thus, disable me to perform any formating and fresh installation of OS. However, the keyboards works fine at the begining of the POST and in BIOS. Is there any settings in BIOS that i should perform?.....
However, I realise in order to get through the foresaid message without the the keyboard freeze up is by keep on trying to boot up and shut down until it works (but only work once, then hv to try again), but this is not a solution as if what if I wanted to have 2 OS?... I cant use the keyboard to choose either of the OS installed. I have tried to change the RAM, change keyboard, use the build in VGA, or even remove the motherboard from the ATX casing - result: still have the same problem. What should I do??.. I have look around the forum for answers but there isnt any (I hope I didnt miss any). Is there any problem with my motherboard, or its BIOS, or any of the harware compatibility or etc..... what actually can I do?
I do not dare to perform any BIOS update Unnecessary (it seems that many have problems with BIOS problem in this forum) and moreover i think my BIOS is the most up-to-date. I cant find any new version in the net. Anyway I will check this topic frequently as possible to hope for any solution. What is the best solutions?
Thanks.

But the thing that makes me wonder is, my BIOS version is the latest but why this type of problem occurs??
What version of BIOS should I use?? Any recommendation ??
Thanks.

Need urgent help! - I accidentally sycn my friend's iphone account to my company's phone. I could not swich back to my own icloud account because of the icloud password i enter was incorrect. My friend does not use this icloud account since age.

Need urgent help! - I accidentally sync my friend's iphone account to my company's iphone. I could not switch back to my own icloud account because of the icloud password i enter was incorrect. My friend does not use this icloud account since age only remember 1 password which i already try but iphone shown that " incorrect password" I checked on icloud ID and try to log in but it shown as " You Apple ID was disable for security reason. To enable your account must reset password" but so bad again, the email address that he used to create icloud ID also lock for security reason. May Apple Supporter please help reset it ASAP? I can verify that I am the iphone's owner, as it belong to company's phone.

Have your company IT department get proof that the company was the
original purchaser of the iPhone and visit a physical Apple store with
proof of original purchase, proof that person is company representative,
and the iPhone - Apple may be able to help. If no physical Apple store,
contact Apple - you will still need the same items of proof.

Need Urgent help, I have made partition hard drive in my mac book and using OS mac

Need Urgent help, I have made partition hard drive in my mac book and using OS mac & Window8 seperately... for couple of days it works great for both window & OS mac But nowadays, my pc gets restart automatically while using window & even I cant access to my Mac OS........... I got some error in window (error80070003) ...>>>>> Now how can I format whole drive & recover my Mac book OS.without boot disk.

I can't find that model. If you open System Profiler in the Utilities folder look for the Model Identifier over in the right hand display. What do you find for the model ID? If your computer supports Internet Recovery here's what to do:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer. If Mavericks is not installed, then you can reinstall it by re-downloading the Mavericks installer.
You will need to use Boot Camp Assistant in order to create a new Windows partition, then reinstall Windows.

I need urgent help to remove unwanted adware from my iMac. Help!

I need urgent help to remove unwanted adware from my iMac. I have somehow got green underline in text ads, pop up ads that come in from the sides of the screen and ads that pop up selling similar products all over the page wherever I go. Its getting worse and I have researched and researched to no avail. I am really hestitant to download any software to remove whatever it is that is causing this problem. I have removed and reinstalled chrome. I have cleared Chrome and Safari cookies. Checked extensions, there are none to remove. I need to find an answer on how to get rid of these ads. Help please!

You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/Application Support/VSearch
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchAgents/com.vsearch.agent.plist
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. It must be said that this failure of oversight is inexcusable and has seriously compromised the value of Gatekeeper and the Developer ID program. You cannot rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Need urgent help. I have been trying to resolve this problem to no avail. I am able to preview my sp

Need urgent help. I have been trying to resolve this problem to no avail. I am able to preview my sprymenu on my local browsers opera, google crome, and IE but when it is uploaded, the sprymenu squashes to the left hand side.

Please get your checkbook ready. (Only kidding.)
Have you ever done a hard factory reset of your Airport Express base? If not, then try it. Push down the reset button with a pen, then keep it depressed as you plug AX into the wall and keep holding it down until the green light blinks 4 times and then turns amber. Then let go. Unplug your broadband modem for a couple of minutes and shut down your Mac. First restart the modem, then the Mac. Use Airport Setup Assistant to set up a new network from scratch.
In System Prefs > Network > Show > Network Port Configurations drop n drag Airport to the top of the list and deselect all port configurations that you do not use.
That's a start.

Iphone 5 changes time randomly.. need urgent help!!

hi everybody .. i need urgent help to fix the problem of my iphone 5 ( IOS 7, Vodafone Germany) .. 2 weeks ago i noticed that the time on iphone was completely wrong and not related even to other time zones .. sometimes it freezed at the same minute for 1 hour .. sometimes it ran anticlockwise.. i switched off the automatic time setting..i made reset and erased all contents and reloaded all configuration from iCloud..the same problem.. i registered it as new iPhone .. no improvement... i switched off the WIFI..3G...i made reset using iTunes .. same error. same error... i took it to Apple store in Dresden- Germany and demostrated the problem there .. they told me that the problem beyond their knowledge and i have to contact apple support ... i sent the iPhone to Apple support in Netherland ... they sent it back on the next day coz they were not able to reproduce the problem...after regestering the iPhone again with my ID.. the same problem ... it's catastrophic coz many functions are time dependent (imessege, Calender, Email, etc.. )..and i cannot rely on my iPhone anymore... has anybody encountered the same problem in germany... and what is the solution?

If the phone is failing to charge, then there are three possibilities -
1) The charging cable is defective - does it work with anything else?
2) The power source is defective - unlikely since you have tried different ones with same result.
3) The phone has a hardware failure - which means you need to take to an Apple store or call them up for advice.

Need urgent help!!!! (combine prompt and formula)

Hi,
I am using Oracle Business Intelligence 10.1.3.3.2, and creating some reports from answers. I desperately need to combine
prompt and formula on some column.
I need to use prompt in my formula on some column.
Need urgent help !

You can use the presentation variables to pass the value of the prompt into the report or any column formula.
In the dashboard prompt you see an option called "Set Variable" where and you need to give a name to the variable.(Say Var_value)
Now the value of the variable can be simply referenced using the syntax @{var_name}{10}. Here '10' being the defualt value which is optional you can simply reference using @{var_name} and you have the value of the prompts passed.
Hope it works
Thanks
Prash

Need urgent help to expend a BB school group numbers of members...

Need urgent help to expend a BB school group....The group can only accept 30 members and the school student using BB are about 6000 students that are interested in joining the group....
...Moyosoreoluwa...

I believe there is a hard limit of 30 people in a BBM group.

Need urgent help with HSDIO hardware timing

Hi everyone,
I need urgent help regarding HSDIO hardware timing. I've been working in a project which generating serial ramp using HSDIO pxie device.
I'm using clock rate 40MHz and generating 14 bit of boolean for each step of ramp. And I have to generate simply 256 steps ramp.
Which means, 256 (steps) x 14 (boolean array) x 25 ns (period of 1 boolean value) = 89,6 ns.
What I'm doing right now is with using index of FOR loop as my input data (converting the index into 14bit boolean), then write into pxie device in every iteration,
which means, my data is getting into output in every 1ms time, right? (I'm using windows)
And I want to be able to generate faster than that.
How can I prewrite my 256 steps ramp, then write them all at once into pxie device. I'm really stuck here.
In the picture can you see how I do the write into device in every iteration of FOR Loop.
Regards,
Yan.

hi, thanks for responding.
with using example of dynamic generation with script, I can manage to generate the ramp with controllable delay (generate the whole waveform, including delay with script command, then write to the card).
But I still have 1 question, I can test the output of the generation using oscilloscope and cant see the start delay (I'm writing delay at the start, before generating the ramp). My signal generated at 0 sec.
How can I check this start delay? is there any good example delivered with Labview to check this generation? Somehow I cant use the "dynamic generation and acquisition" example to see my generation (cant figure out how to capture the generated signal).
regards,
Yan.

Need to do a remote wipe of my iphone - stolen 24 hrs ago and . Need urgent help on this. Thanks - Pinaki

Need to do a remote wipe of my iphone - stolen 24 hrs ago Need urgent help on this. Thanks - Pinaki
< Personal Information Edited By Host >

Follow the steps in this article:
iCloud: Erase your device
Sign in to icloud.com/#find with your Apple ID (the one you use with iCloud), then click Find My iPhone.If you’re using another iCloud app, click the app’s name at the top of the iCloud.com window, then click Find My iPhone.If you don’t see Find My iPhone on iCloud.com, your account just has access to iCloud web-only features. To gain access to other iCloud features, set up iCloud on your iOS device or Mac.
Click All Devices, then select the device you want to erase.If you have Family Sharing set up, your family members’ devices appear below their names.
In the device’s Info window, click Erase [device].
To erase:
An iOS device: Enter your Apple ID password. If the device you’re erasing has iOS 7 or later, enter a phone number and message. The number and message will be displayed on the screen after the device is erased.

Need urgent help on J2ME Bluetooth.

Hi all,
I really need help about run example code of j2me bluetooth.
I'm doing a MSc project about bluetooth for delivery system, I just want to use bluetooth to send an object to PDA.
I,ve tried example on "Bluetooth for Java" with Atinav library but, it couldn't work.
Do you have an example code that can run on NetBeans 5.0 with
- AvetanaBluetooth Library (purchased)
or
- normal Bluetooth.java library
I need some examples for develop on it. and also please advice me on how to run and test the programs. I really need urgent help Please help me. my email is [email protected] or [email protected]

Hi Hari,
I think that the logic needs to be build up in the DISP part of the Search help exit.
What you can do is also get the Plant in the search help as an export parameter.
Then in the Return Tab you can check if the plant = 'AA', delete the data.
e.g.
      LOOP AT record_tab.
        IF RECORD_TAB-STRING+22(2) = '90'.
          DELETE record_tab INDEX sy-tabix.
        ENDIF.
      ENDLOOP.
Hope this helps.
Regards,
Himanshu
Message was edited by:
        Himanshu Aggarwal

Switch until release using keyboard...need urgent help

Similar Messages

Maybe you are looking for