Switch Wireframe for all repicators

Hi, I have 10 replicators in my project, and so the Image view is really slow... Is there any way to turn all the replicators to Wireframe at once? It drives me crazy to manually switch them between Wireframe and Image...

Can't do them all at once. You have to switch each one individually via inspector.
Hope that helps!

Similar Messages

  • Conversation view in Mail - switch on for *all* folders?

    I'm liking the "organize by conversation" option in the new Mail, but unless I'm missing something it looks like I have to switch it on separately or each of my (many!) folders.
    Is there a way to just switch it on globally?

    I'm afraid that setting is folder specific.
    There's a very simple "Info.plist" xml file on disk inside each folder (for example):
    ~/Library/Mail/V2/[email protected]@imap.gmail.com/Label.mbox/Info.plist
    where the status of conversation view for that folder is stored.
    Enabled:
    <key>DisplayInThreadedMode</key>
    <string>yes</string>
    Disabled:
    <key>DisplayInThreadedMode</key>
    <string>no</string>
    If you're confortable with shell scripting I guess you could go on about bulk searching & replacing those values from "no" => "yes".
    Just remember to backup first and do your tests with the Mail.app turned off.

  • I downloaded an update from creative suite 5.5. to 6.0 and then switched computers for a few months. looks like all of the applications have not disappeared. maybe a trial was uploaded instead of the actual updates? anyway, i just want to get the applicat

    i downloaded an update from creative suite 5.5. to 6.0 and then switched computers for a few months. now I am back using the original computer and it looks like all of those Adobe applications (both 5.5 and 6.0) have disappeared. Maybe a "trial" was uploaded instead of the actual updates? Anyway, i just want to get the applications back onto my computer. i tried to enter the serial numbers on my original packaging but systems side error message from Adobe says they were already "redeemed" (which makes sense bc I already downloaded the updates. Apparently there is no phone customer service for Creative Suite anymore. ARRGGG. Any and all suggestions welcome!
    -Michele

    there is no update from 5.5. to 6.0.
    you could have upgraded from 5.5 to 6.0, but you would know that because you paid money.
    assuming you paid no money for a 6.0 upgrade, you still have your 5.5 license.  uninstall clean and reinstall 5.5 per http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • View spanning tree configuraton for all the switches in ciscoworks

    Hi All,
    Is there any way I can see spanning tree configuration for all the switches we have on our networks in Ciscoworks.
    Waiting for your kind reply.
    Thanks in advance
    samir

    This can be done from within Campus Manager's Topology Services.  Open up the LAN Edge View map, and you should seesome switch clouds on the map.  If you drill into one of the clouds, you should see a Spanning Tree option in the right-hand tree.  If you expand this, you can visualize the spanning tree for MISTP or even for each VLAN.

  • Fast user switching menu - how do I have icons for all users?

    I'm setting up a new computer for three users. I have enabled the fast user switching menu. I set the menu to 'Icon'. However, it only shows the icon for myself, the admin. For the other two accounts, when they log in it remains as their (rather long) real names. The same thing happens if I select 'Account Name': it only shows the 'Account Name' for myself. When I switch to the other users, it is still their real name.
    How can I have icons (or account names) for ALL users??

    See CCK Wizard: https://addons.mozilla.org/firefox/addon/cck/
    You can use a mozilla.cfg file in the Firefox program folder to lock prefs or specify new (default) values.
    Place a file local-settings.js in the defaults\pref folder where you also find the file channel-prefs.js to specify using mozilla.cfg.
    pref("general.config.filename", "mozilla.cfg");
    pref("general.config.obscure_value", 0); // use this to disable the byte-shift
    See:
    *http://kb.mozillazine.org/Locking_preferences
    These functions can be used in the mozilla.cfg file:
    defaultPref(); // set new default value
    pref(); // set pref, but allow changes in current session
    lockPref(); // lock pref, disallow changes

  • Why is my iPhone 4 so frekn slow with iso 6 it takes like 2 mins to load anything 5 mins for apps to download apple update messed my whole phone up its sluggish to load anything it's really annoying an making me want to switch form apple all together

    Apple really let me Down with this new update really thinking about switch form apple all together

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.    

  • How do I change the icloud account on my iphone? I want to use the same account for all my apple devices (macbook air and imac and iphone). I can't see where I can amend the iphone account because it is in grey?

    I want to use the same account for all my apple devices (macbook air, imac and iphone). I can't see how I can amend the iphone account because it is in grey? I also can't remember the password for this account so i can't even delete it and start again?
    Help!
    Thanks

    Deleting an iCloud account only deletes it from the Device, not from iCloud.  In iOS 8, the name of this setting changed to "Sign Out" as that is a better reflection of what actually happens.  Your iCloud data remains on the server, available to devices still signed into the account, but the device you sign out of the account on is disconnected from the account, and as a result, the iCloud data from that account is removed from the device.  It will redownload to the device should you sign back into the account.
    The only issue you'll run into when you switch between accounts is with my photo stream photos older than 30 days.  When you delete (or sign out of) and account, your photo stream photos are deleted along with the other data from the account in question.  However, unlike other data which remains on the server and can redownload to your device when you sign back in, my photo stream photos only remain in iCloud for 30 days.  When you sign back in, you will only get back my photo stream photos added in the last 30 days (as older photos are no longer in iCloud to redownload).  Like other account data, any my photo stream photos on your other devices signed into the account are unaffected by this.  If you want to keep older my photo stream photos on your device as you change iCloud accounts, save them to your camera roll before deleting (signing out of) the account.

  • Thinkpad keys once and for all

    There are lots of people out there having problems to get thinkpad keys to work. I would like to solve this issue and potencially write a wiki page about that.
    Here is the information I got till today:
    1. the ibm-acpi module is renamed to thinkpad-acpi module
    2. both modules create a proc interface under /proc/acpi/ibm/ which sometimes needs to be chrooted 666 to be able to control thinkpad functions from bash.
    3. doing echo enable,0x0000 > /proc/acpi/ibm/hotkey sends key events to the thinkpad firmware (nvram module has to be loaded). Mostly this doesn't work thou...
    4. doing echo enable,0xfffffffff > /proc/acpi/ibm/hotkey sends key events to acpid. This has to be started and does things according to the /etc/acpi/handler.sh script. This seems to work for me (T41). Here's my script:
    #!/bin/sh
    # Default acpi script that takes an entry for all actions
    set $*
    ev_type=`echo "$1" | cut -d/ -f1`
    # We have to take special care for events send by ibm/hotkey:
    if [ "$ev_type" = "ibm" ]; then
    ev_type=`echo "$1" | cut -d/ -f1`
    event=`echo "$1" | cut -d/ -f2`
    key="$2"\ "$3"\ "$4"
    else
    # Take care about the way events are reported
    ev_type=`echo "$1" | cut -d/ -f1`
    if [ "$ev_type" = "$1" ]; then
    event="$2";
    else
    event=`echo "$1" | cut -d/ -f2`
    fi
    fi
    case "$ev_type" in
    button)
    case "$event" in
    power)
    logger "acpid: power button pressed; starting shutdown"
    # logger "acpid: received a shutdown request"
    /sbin/init 0
    break
    sleep)
    logger "acpid: sleep button pressed; initiating hibernate-ram"
    # logger "acpid: received hibernate request"
    /usr/sbin/pm-suspend
    lid)
    logger "acpid: lid event"
    logger "acpid: action $2 is not defined"
    esac
    # BEGIN customization for ibm/hotkey:
    ibm)
    case "$event" in
    hotkey)
    case "$key" in
    "HKEY 00000080 00001002")
    logger "acpid: lock button (Fn+F2) pressed"
    "HKEY 00000080 00001003")
    logger "acpid: blank screen (Fn+F3) pressed; switching display off"
    xset dpms force off
    "HKEY 00000080 00001004")
    logger "acpid: sleep button (Fn+F4) pressed; initiating hibernate-ram"
    /usr/sbin/pm-suspend
    "HKEY 00000080 00001005")
    logger "acpid: bluetooth button (Fn+F5) pressed; toggling bluetooth"
    # echo 3 > /proc/acpi/ibm/beep
    if grep -q enabled /proc/acpi/ibm/bluetooth ; then
    echo disable > /proc/acpi/ibm/bluetooth
    elif grep -q disabled /proc/acpi/ibm/bluetooth ; then
    echo enable > /proc/acpi/ibm/bluetooth
    fi
    "HKEY 00000080 00001007")
    logger "acpid: screen toggle button (Fn+F7) pressed"
    "HKEY 00000080 0000100c")
    logger "acpid: hibernate button (Fn+F12) pressed; initiating hibernate"
    /usr/sbin/pm-hibernate
    "HKEY 00000080 00005001")
    # This is the lid CLOSE event
    # as of now it is already handled above
    "HKEY 00000080 00005002")
    # This is the lid OPEN event
    # as of now it is already handled above
    logger "acpid: $ev_type/$event $key is not defined"
    esac
    dock)
    case "$key" in
    "GDCK 00000003 00000001")
    logger "acpid: Dock eject request"
    "GDCK 00000003 00000002")
    logger "acpid: laptop was undocked"
    "GDCK 00000000 00000003")
    logger "acpid: laptop was docked"
    logger "acpid: $ev_typ $event event $key is not defined"
    esac
    bay)
    case "$key" in
    "MSTR 00000003 00000000")
    logger "acpid: got ultrabay eject request"
    "MSTR 00000001 00000000")
    logger "acpid: ultrabay eject lever inserted"
    esac
    esac
    logger "ACPI group $1 / action $2 is not defined"
    esac
    I have found it here http://priyadi.net/archives/2004/12/20/ … kpad-t41p/.
    5. Allthou thinkpad-acpi should in time be able to handle all keys, as of today, one still needs tpb for some of them. KDE has a module in the control center that has similar functionality and doesn't depend on tpb. I have not yet tried to get all working.
    Any other contribution would be welcome. The handler.sh script can probably be adapted or somehow rewritten, some of this info may be wrong...
    Last edited by jarda-wien (2008-03-28 16:17:24)

    Sorry, no solution, but I noticed the same behaviour on my X61s.
    Here's my handler.sh. It's pretty much the same, but it also takes care of turning on an external VGA display (if connected), adjusting the brightness per custom script, changing the cpu frequency scaling governor on AC plug/unplug and suspending to RAM on LID close. It could be improved at certain points I guess.
    #!/bin/sh
    # Default acpi script that takes an entry for all actions
    # NOTE: This is a 2.6-centric script. If you use 2.4.x, you'll have to
    # modify it to not use /sys
    set $*
    case "$1" in
    ibm/hotkey)
    case "$2" in
    HKEY)
    case "$4" in
    00001002) # Lock screen
    xscreensaver-command -lock
    #00001003) # Battery icon
    00001004) # Suspend to RAM
    hibernate -F /etc/hibernate/ususpend-ram.conf
    00001005) # Switch Bluetooth
    if [ "$(grep "status.*enabled" /proc/acpi/ibm/bluetooth)" ]; then
    echo "disable" > /proc/acpi/ibm/bluetooth
    else
    echo "enable" > /proc/acpi/ibm/bluetooth
    fi
    00001007) # Toggle external display
    if [ "$(xrandr -q | grep "VGA connected")" ]; then
    if [ "$(xrandr -q | grep "VGA connected [0-9]")" ]; then
    xrandr --output VGA --off
    else
    xrandr --output VGA --auto
    fi
    else
    xrandr --output VGA --off
    fi
    #00001008) # Toggle Trackpoint/Touchpad
    #00001009) # Eject from dock
    0000100c) # Hibernate
    hibernate -F /etc/hibernate/ususpend-disk.conf
    #00001014) # Toggle zoom
    #00001018) # ThinkVantage button
    esac
    esac
    button/lid)
    case "$2" in
    LID)
    case "$3" in
    00000080) # Lid opened/closed
    grep open /proc/acpi/button/lid/LID/state || hibernate -F /etc/hibernate/ususpend-ram.conf
    esac
    esac
    ac_adapter)
    case "$2" in
    AC)
    case "$4" in
    00000001) # AC plugged
    echo -n performance > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
    00000000) # AC unplugged
    echo -n ondemand > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
    esac
    esac
    video)
    case "$2" in
    LCD0)
    case "$3" in
    00000086) # Brightness up
    brightness +
    00000087) # Brightness down
    brightness -
    esac
    esac
    esac
    Here's my brightness script too:
    #!/bin/bash
    # This script adjusts the display brightness on my ThinkPad X61s.
    # Usage: brightness +/-
    [ "$UID" != 0 ] && echo "err, you need to be root" && exit 1
    ctrl_file=/sys/class/backlight/acpi_video1/brightness
    max_file=/sys/class/backlight/acpi_video1/max_brightness
    brightness=$(cat $ctrl_file)
    max=$(cat $max_file)
    min=20
    if [ "$1" = "+" ]; then
    if [ $brightness -ge $max ]; then
    brightness=$max
    else
    brightness=$(($brightness+$max/10))
    [ $brightness -gt $max ] && brightness=$max
    fi
    elif [ "$1" = "-" ]; then
    if [ $brightness -le $min ]; then
    brightness=$min
    else
    brightness=$(($brightness-$max/10))
    [ $brightness -lt $min ] && brightness=$min
    fi
    else
    echo $brightness && exit 0
    fi
    echo $brightness > $ctrl_file
    Of course this could be incorporated within the handler.sh itself as well.

  • I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don'

    I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don't want us to use Firefox.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; FNGP_SYS)

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the ''Safe mode'' start window.
    You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

  • Performanc​e Profiler returning zero seconds for all vi's

    I tried running the performance profilers, and it returns 0 seconds for all vi's. This certainly cannot be the case. Am I running the program incorrectly?
    thanks
    Phil B

    I run vi's continuously for a while. If you don't do that, you will only see the total time of that particular vi. Also switch to microseconds.
    aartjan

  • Internet Access through TMG for all HO & Branch office

    Dear Experts!,
    I am new to the Forefront TMG 2010. Have requirement to implement internet access.
    Head office : 192.168.11.x/24 (192.168.11.1 is the TMG server)
    Branch Office 1: 192.168.12.x/24
    Branch Office 2 : 192.168.14.x/24
    Branch Office 2 : 192.168.16.x/24
    Forefront TMG 2010 standard edition.
    Having 3 NIC's two have different ISP network addresses and one has 192.168.11.1.
    Branch office are connected using MPLS network, the requirement is all branch site internet must be accessed through TMG 2010 server which is homed in Head Office. How to achieve ?
    What needs to be done in external firewall and in TMG for enabling internet access.
    Thanks!
    Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

    Hi Ganesh,
    Hope this helps
    1 - If you wish to give internet as Proxy to users.
    Ensure the Below subnet is able to reach TMG Internal Interface that is 192.168.11.1
    Subnet
    Branch Office 1: 192.168.12.x/24
    Branch Office 2 : 192.168.14.x/24
    Branch Office 2 : 192.168.16.x/24
    Configuration
    Enable Proxy in TMG and configure Proper Ports as per your requirements
    On the Client IE – Ensure you put Proxy IP as TMG and Port configured in TMG configuration.
    Enable a Rule
    Access Rule
    Source : Internal
    Destination : External
    Ports : HTTP / HTTPS
    Users : Authenticated Users
    2 As normal Internet as Gateway to users
    You need to request your MPLS provider to change the Default Route of below subnet to 192.168.11.1. By doing this, all the internet request from the below subnet to internet will hit TMG.
    Subnet
    Branch Office 1: 192.168.12.x/24 Default Route 192.168.11.1
    Branch Office 2 : 192.168.14.x/24 Default Route 192.168.11.1
    Branch Office 2 : 192.168.16.x/24 Default Route 192.168.11.1
    IF you have any L3 Switch then you can also make Default gateway as L3 for all the subnet and from L3 device point it to TMG
    Enable a Rule
    Access Rule
    Source : Internal
    Destination : External
    Ports : HTTP / HTTPS
    Users : All Users ( Important )
    Two ISP
    In network Rules : You need to use NAT
    You will have a Rule which NATS internal to  External
    On external - Choose which ISP interface should be used  and Apply NAT rule

  • Free of charge po line items for all account assignments

    Dear All,
    Is there any setting by which for all account assignments/item category combinations, I should get option to create free of charge PO line items, irrespective of the preceeding documents through which I prepare PO (from PR).
    I have checked in account assignment configuration and didnt find any fields that favor the setting.
    Please let me know if there is any customization setting for above requirement.
    Best Regards,
    Krishna

    Hi,
    The 'Free Items' indicator in the overview is only used to facilitate               
    the switching off of the Inv.Receipt flag and the GR-based IV flag.                 
    Note that the 'Free Items' indicator is not stored on the PO item                   
    table EKPO.                                                                         
    The Inv.Receipt flag (and the GR-based IV flag) are the fields that                 
    really controls if an item is 'free' or not.                                        
    So, the field is initiated based on the values in those fields rather               
    than from input from the user.                                                      
    When an invoice is expected it's not a free-item. This indicator 
    invoice receipt is chosen from the main-item and also from the          
    customization maintained for item category 0 in table T163.  
    I am afraid that I have to say that in standard SAP design                   
    it is not possible to default the "Free item" flag.   
    Regards,
    Edit

  • Firefox does not print. I AM DONE USING FIREFOX UNTIL THEY FIX PRINTING PROBLEMS ONCE AND FOR ALL!

    Firefox does not print. Mozilla doesn't seem to care to fix this problem, ignoring the numerous customer requests and pleadings for help. At this point, I AM DONE USING FIREFOX UNTIL THEY FIX PRINTING ONCE AND FOR ALL!!!!!!!!!
    == This happened ==
    Every time Firefox opened

    I honestly think the OP is making the correct decision to quit using Firefox due to all the print-related problems and Bugs that are in Firefox, '''that Mozilla doesn't want to fix'''. And there are more Bugs that affect only the Mac-platform (like the one where the user has to open a page in a new window for the 2nd web page printed from that window), than there are on Windows and Linux.
    Users having to reset hidden preferences repeatedly isn't a cure.
    The same 3 print-related Bugs in 2002 that caused me to take 6 months to switch over to ''Phoenix'' from IE 5.5, '''are still present in Firefox!''' I print nothing from Firefox these days without viewing Print Preview first, then about 10% of the time I do a "View in Opera" and do a Print Preview there - which shows a good print out 95% of the time (which IMO shows the page isn't at fault), and print it from Opera.
    1660 Bugs listed for "'''print'''"
    https://bugzilla.mozilla.org/buglist.cgi?quicksearch=print

  • Once-and-for-all Authentification in Finder / Terminal

    Hello I need to install somethings (namely Font files … but this is irrelevant)
    in a certain Folder not part of my User Folder (though I am the Admin of my Machine).
    Should I do this manually, then must I enter my Password / Authentication upon each Action.
    Unnerving!
    I would like to be able to Authentify once-and-for-all (during a Session of editting);
    then perform my Tasks, then switch of my Authentication.
    (1.) Is this Possible (in Lion)?
    (2.) When yes, how?
    Note: I have vague Memories of doing this in Leopard (10.5.8), so this isn’t at all
    a wildly improbably thing.
    Thanks in Advance, should anyone constructively reply.

    You should never have to enable the root user.
    Tony Rombaldi posted this at MacInTouch. Give it a try:
    When you use the Disk Utility app and Repair Permissions, it doesn't actually repair the permission settings on folders and files in your Home folder, where your documents and personal applications may reside.
    In Lion, there is an additional Repair Permissions application utility hidden away. This tool is located inside boot Repair Utilities. Here's how to access it.
    1. Restart Lion and hold down the Command and R keys.
    2. You will boot into the Repair Utilities screen. On top, in the Menu Bar click the Utilities item, then select Terminal.
    3. In the Terminal window, type resetpassword and hit Return.
    4. The Password reset utility launches, but you're not going to reset the password. Instead, click on the icon for your Mac's hard drive at the top. From the drop-down below it, select the user account where you are having issues.
    5. At the bottom of the window, you'll see an area labeled 'Reset Home Directory Permissions and ACLs'. Click the Reset button there.
    The reset process takes a couple of minutes. When it's done, quit the programs you've opened and restart your Mac. Notice that 'Spotlight' starts re-indexing immediately.

  • How do I get my NYTimes app off the new "Newsstand" and back into the folder I set up for all my news apps?

    I finally uploaded the now operating system 5.0 and set up iCloud. It rearranged all my apps on my iPhone, and took my NYTimes app out of the folder I set up for all my news apps and now I can't get it out. Nor can I move my other news apps onto the newsstand. Any ideas?

    You can't (at the moment).  Have been playing around with the same problem for about an hour - very irritating!!!
    If enough of us complain, (to the NYTimes) they might have it switched back, but I doubt it.  From the marketing point of view I would imagine they want "Newstand" to be THE subscription center, which does make sense.

Maybe you are looking for